Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ku-Band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Oceanographic measurement capabilities of the NASA P-3 aircraft

Instrumentation on NASA P3 aircraft available to provide ground truth for ERS-1 is described. The wave sensors include the 36 GHz Surface Contour Radar (SCR), the Ku-band Radar Ocean Wave Spectrometer (ROWS), and the Airborne Oceanographic Lidar. The other sensors include a C-band scatterometer, video camera, radiation thermometer, and AXRTs. The SCR and ROWS directional spectrum measurements are discussed. When planning for an underflight mission, the limited endurance of the aircraft (6 hr) and flight cost (2.7 K$/hr) must be considered. The advantage of the redundancy afforded by the several wave instruments is another important consideration.

Mollo-Christensen, Erik↗
NASA NTRS1986

Shuttle communication and tracking systems signal design and interface compatibility analysis

Various options for the Dedicated Payload Communication Link (DPCL) were evaluated. Specific subjects addressed include: payload to DPCL power transfer in the proximity of the payload, DPCL antenna pointing considerations, and DPCL transceiver implementations which can be mounted on the deployed antenna boom. Additional analysis of the Space Telescope performance was conducted. The feasibility of using the Global Positioning System (GPS) for attitude determination and control for large spacecraft was examined. The objective of the Shuttle Orbiter Radar Test and Evaluation (SORTE) program was to quantify the Ku-band radar tracking accuracy using White Sands Missile Range (WSMR) radar and optical tracking equipment, with helicopter and balloon targets.

Source record↗
NASA NTRS1987

Advanced space communications architecture study. Volume 2: Technical report

The technical feasibility and economic viability of satellite system architectures that are suitable for customer premise service (CPS) communications are investigated. System evaluation is performed at 30/20 GHz (Ka-band); however, the system architectures examined are equally applicable to 14/11 GHz (Ku-band). Emphasis is placed on systems that permit low-cost user terminals. Frequency division multiple access (FDMA) is used on the uplink, with typically 10,000 simultaneous accesses per satellite, each of 64 kbps. Bulk demodulators onboard the satellite, in combination with a baseband multiplexer, convert the many narrowband uplink signals into a small number of wideband data streams for downlink transmission. Single-hop network interconnectivity is accomplished via downlink scanning beams. Each satellite is estimated to weigh 5600 lb and consume 6850W of power; the corresponding payload totals are 1000 lb and 5000 W. Nonrecurring satellite cost is estimated at $110 million, with the first-unit cost at $113 million. In large quantities, the user terminal cost estimate is $25,000. For an assumed traffic profile, the required system revenue has been computed as a function of the internal rate of return (IRR) on invested capital. The equivalent user charge per-minute of 64-kbps channel service has also been determined.

Horstein, Michael↗
NASA NTRS1987

Advanced space communications architecture study. Volume 1: Executive summary

The technical feasibility and economic viability of satellite system architectures that are suitable for Customer Premise Service (CPS) communications is investigated. System evaluation is performed at 30/20 GHz (Ka-band); however, the system architectures examined are equally applicable to 14/11 GHz (Ku-band). Emphasis is placed on system that permit low cost user terminals. Frequency Division Multiple Access (FDMA) is used on the uplink, with typically 10,000 simultaneous accesses per satellite, each of 64 kbps. Bulk demodulators onboard the satellite, in combination with a baseband multiplexer, convert the many narrowband uplink signals into a small number of wideband data streams for downlink transmission. Single hop network interconnectivity is accomplished through use of downlink scanning beams. Each satellite is estimated to weigh 5600 lb and consume 6850W of power; the corresponding payload totals are 1000 lb and 5000W. Nonrecurring satellite cost is estimated at $110 million, with the first unit cost at $113 million. In large quantities, the user terminal cost estimate is $25,000.

Horstein, Michael↗
NASA NTRS1987

The Radar Ocean-Wave Spectrometer

The scanning-beam Radar Ocean-Wave Spectrometer (ROWS) technique is described. The derivation of a spectrum for the reflectivity modulation as a function of range is examined. The usefulness of the ROWS technique was initially validated using aircraft data obtained in 1978 with the GSFC Ku-band pulse-compression radar; additional examples of aircraft data which verify the effectiveness of the ROWS technique are presented. The development of a ROWS mode for Spectrasat is discussed. Consideration is given to the incidence angle, twin beam option for cross-section roll-off and wind vector determination, rotation rate, antenna and footprint dimensions, integration time, sphericity effects, and a processor configuration. A design for the ROWS-mode time-domain processor on Spectrasat is proposed. The performance of the system is evaluated, and it is determined that the system performs well.

Jackson, Frederick C.↗
NASA NTRS1986

Space Station multiple access communications system

The development of a multiple access communications system (MACS) for the space-to-space communications on the Space Station is discussed. The communications capabilities of the FHMA, CDMA, TDMA, SDMA, and FDMA techniques are evaluated; FDMA was selected for the space-to-space communications on the Space Station because of its lower complexity and growth capability. The proposed space-to-space multiple access system for the Space Station is a digitally modulated Ku-band FDMA system with a distributed architecture; this system would transmit on frequencies between 13.4 and 13.7 GHz and receive on frequencies between 14.6 and 14.89 GHz, and the bandwidth will support seven high-data-rate users and 12 low-data-rate users. The IF components and antennas for the MACS are examined. A multiple access breadboard design is described.

Olson, Nanci A.↗
NASA NTRS1987

An analytical and experimental study of injection-locked two-port oscillators

A Ku-band IMPATT oscillator with two distinct output power ports was injection-locked alternately at both ports. The transmission locking bandwidth was nearly the same for either port. The lower free running power port had a reflection locking bandwidth that was narrower than its transmission locking one. Just the opposite was found at the other port. A detailed analytical model for two-port injection-locked oscillators is presented, and its results agree quite well with the experiments. A critique of the literature on this topic is included to clear up misconceptions and errors. It is concluded that two-port injection-locked oscillators may prove useful in certain communication systems.

Freeman, Jon C.↗
NASA NTRS1987

Automatic antenna switching design for Extra Vehicular Activity (EVA) communication system

An Extra Vehicular Activity (EVA) crewmember had two-way communications with the space station in the Ku-band frequency (12 to 18 GHz). The maximum range of the EVA communications link with the space station is approximately one kilometer for nominal values for transmitter power, antenna gains, and receiver noise figure. The EVA Communications System, that will continue to function regardless of the astronaut's position and orientation, requires an antenna system that has full spherical coverage. Three or more antennas that can be flush mounted on the astronaut's space suit (EMU) and/or his propulsive backpack (MMU), will be needed to provide the desired coverage. As the astronaut moves in the space station, the signal received by a given EVA antenna changes. An automatic antenna switching system is needed that will switch the communication system to the antenna with the largest signal strength. A design for automatic antenna switching is presented and discussed.

Randhawa, Manjit S.↗
NASA NTRS1988

Development of the network architecture of the Canadian MSAT system

A description is given of the present concept for the Canadian Mobile Satellite (MSAT) System and the development of the network architecture which will accommodate the planned family of three categories of service: a mobile radio service (MRS), a mobile telephone service (MTS), and a mobile data service (MDS). The MSAT satellite will have cross-strapped L-band and Ku-band transponders to provide communications services between L-band mobile terminals and fixed base stations supporting dispatcher-type MRS, gateway stations supporting MTS interconnections to the public telephone network, data hub stations supporting the MDS, and the network control center. The currently perceived centralized architecture with demand assignment multiple access for the circuit switched MRS, MTS and permanently assigned channels for the packet switched MDS is discussed.

Davies, N. George↗
NASA NTRS1987

VSAT networks - An overview

This paper examines the technology and constraints of very small aperture terminals (VSAT) networks, a special type of wide-area thin-route satellite network that represents a recent innovation in the field of satellite communications. VSAT network architectures suitable for both data and voice communications are studied in this paper. Several issues concerning the frequency of operations, that is, C-band versus Ku-band are examined, and trade-offs between nonspread spectrum and spread spectrum techniques, as well as modulation and multiple access schemes, are considered in detail. Link design examples are given to illustrate the performance of various types of VSAT networks.

Maggenti, Mark↗
NASA NTRS1987

Spectrum utilization for the International Space Station communications and tracking systems

The frequency spectrum which will be used over the lifetime of the International Space Station Program is discussed. Primary communications traffic will initially occur in the S-band and Ku-band regions. Tracking will initially consist mostly of L-band satellite links. As the service demand increases, use of millimeter and optical wavelengths will be required. The particular space/ground links, space/space links, and other links that will be used are described.

Novosad, Sydney W.↗
NASA NTRS1987

TDRS Ku band gateway

The Wideband Transport Frame Formatter (WTFF) is the tracking and data relay satellite (TDRS) ku-band return link gateway. The WTFF system is a multiplexing device developed to process and downlink the high rate data generated by a wide variety of users. The WTFF is designed to frame and format high data rate user channels into transport frames and multiplex according to a predefined schedule into two bit streams that are compatible with TDRS Ku I and Q band service. The combined data rate will be 300 Mbps. The WTFF will service up to eight input channels generating data in the range of 10 to 150 Mbps. In addition to these input channels, audio data will be accepted by the WTFF system and inserted in the downlink. A second function of the WTFF is to provide telecommunication coding as assigned to each virtual channel to ensure a given quality of service.

Collins, Cynthia↗
NASA NTRS1988

Studies of the dependence of the microwave radar cross section on ocean surface variables during the FASINEX experiment

The ability of theoretical radar cross section (RCS) models to predict the absolute magnitude of the ocean radar cross section under a wide variety of sea and atmospheric conditions was studied using experimental data from the FASINEX Experiment. This consists of RCS data from a Ku-band scatterometer mounted on an aircraft (10 separate flights were conducted), a wide variety of atmospheric measurements (including stress) and sea conditions. Theoretical models are tested. Where discrepancies are observed, revisions are hypothesized and evaluated.

Weissman, D. A.↗
NASA NTRS1988

VLBI tracking of the TDRS

The use of radio interferometry is being investigated by NASA/Goddard Space Flight Center as a means to track the TDRS geostationary satellites. This technique offers the advantages of very high accuracy using a ground network confined to the continental U.S. and minimal (or no) impact on spacecraft systems as the downlink transmissions can be used passively. A demonstration experiment was performed using very long baseline interferometry (VLBI). The TDRS-E was observed at S-band over a 28-hour definitive period together with dual X/S-band calibration observations of quasars. An orbit was determined for TDRS-E which agrees within estimated error bars with the orbit solution from NASA's operational tracking system but with about half the uncertainty. It was found that, for S-band tracking, the ionosphere is the largest source of orbit error. Use of Ku-band tracking instead would permit geostationary orbits accurate at the 10-m level.

Ray, J.↗
NASA NTRS1987

Independent Orbiter Assessment (IOA): Analysis of the mechanical actuation subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). The IOA analysis process utilized available MAS hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode.

Bacher, J. L.↗
NASA NTRS1988

Independent Orbiter Assessment (IOA): Assessment of the mechanical actuation subsystem, volume 1

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine draft failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the proposed Post 51-L NASA FMEA/CIL baseline that was available. A resolution of each discrepancy from the comparison was provided through additional analysis as required. These discrepancies were flagged as issues, and recommendations were made based on the FMEA data available at the time. This report documents the results of that comparison for the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). Criticality was assigned based upon the severity of the effect for each failure mode.

Bradway, M. W.↗
NASA NTRS1988

Independent Orbiter Assessment (IOA): Assessment of the mechanical actuation subsystem, volume 2

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine draft failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the proposed Post 51-L NASA FMEA/CIL baseline that was available. A resolution of each discrepancy from the comparison was provided through additional analysis as required. These discrepancies were flagged as issues, and recommendations were made based on the FMEA data available at the time. This report documents the results of that comparison for the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). Criticality was assigned based upon the severity of the effect for each failure mode. Volume 2 continues the presentation of IOA analysis worksheets and contains the potential critical items list, detailed analysis, and NASA FMEA/CIL to IOA worksheet cross reference and recommendations.

Bradway, M. W.↗
NASA NTRS1988

STS-26: Preparations for Launch

Preparations for launch of STS-26 are shown. They include: (1) VAB to OPF high bay rollover; (2) Main engine unpacking and installation; (3) OMS pod installation; (4) Crew hatch removal; (5) Modified crew hatch installation; (6) Nose cap installation; (7) 17 inch disconnect work; (8) Ku-band antenna stow and deploy; (9) Tile work; (10) Oasis payload installation; (11) Solid rocket boosters arrival, preps and stacking; (13) Modified SRB segments: Arrival via train at KSC RPSF; (14) AFT segment rotation to vertical in RPSF; (15) AFT skirt to AFT segment mating; (16) SRB grain inspection; (17) Lift AFT segment; and (18) Lift and mate external tank.

Source record↗