Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING RUN - REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Ditching Tests of a 1/20-Scale Model of the Northrop B-35 Airplane

Tests of a 1/20-scale dynamically similar model of the Northrop B-35 airplane were made to study its ditching characteristics. The model was ditched in calm water at the Langley tank no. 2 monorail. Various landing attitudes, speeds,and conditions of damage were simulated during the investigation. The ditching characteristics were determined by visual observation and from motion-picture records and time-history acceleration records. Both longitudinal and lateral accelerations were measured. Results are given in tabular form and time-history acceleration curves and sequence photographs are presented. Conclusions based on the model investigation are as follows: 1. The best ditching of the B-35 airplane probably can be made by contacting the water in a near normal landing attitude of about 9 deg with the landing flaps full down so as to have a low horizontal speed. 2. The airplane usually will turn or yaw but the motion will not be violent. The maximum lateral acceleration will be about 2g. 3. If the airplane does not turn or yaw immediately after landing, it probably will trim up and then make a smooth run or porpoise slightly. The maximum longitudinal decelerations that will be encountered are about 6g or 7g. 4. Although the decelerations are not indicated to be especially large, the construction of the airplane is such that extensive damage is to be expected, and it probably will be difficult to find ditching stations where crew members can adequately brace themselves and be reasonably sure of avoiding a large inrush of water.

Fisher, Lloyd J.↗

Ditching Tests of a 1/18-Scale Model of the Lockheed Constellation Airplane

Tests were made of a 1/18-scale dynamically similar model of the Lockheed Constellation airplane to investigate its ditching characteristics and proper ditching technique. Scale-strength bottoms were used to reproduce probable damage to the fuselage. The model was landed in calm water at the Langley tank no. 2 monorail. Various landing attitudes, speeds, and fuselage configuration were simulated. The behavior of the model was determined from visual observations, by recording the longitudinal decelerations, and by taking motion pictures of the ditchings. Data are presented in tabular form, sequence photographs, and time-history deceleration curves. It was concluded that the airplane should be ditched at a medium nose-high landing attitude with the landing flaps full down. The airplane will probably make a deep run with heavy spray and may even dive slightly. The fuselage will be damaged and leak substantially but in calm water probably will not flood rapidly. Maximum longitudinal decelerations in a calm-water ditching will be about 4g.

Fisher, Lloyd J.↗

Understanding What's Critical in Protecting Our Society: Can Satellite Observations Help?

There are many vital issues which are impacting our daily lives and will continue to haunt us as long as we live on this planet of ours. These issues range from food supply availability, drought, coastal zone erosion, volcanoes, hurricanes, terrorism, global warming, earthquakes, water resources, air quality, public health, and agriculture production. Such societal needs are directly linked to our geometric population growth, and abundance of automobiles, industrial emissions, industrial waste and extensive fishing of our oceans and elimination of our ecology. The questions which require serious thoughts, research, coordination, and resources to understand, plan and strike a sensible balance in our daily lives and the above issues are tough to deal with. However, with the advent of remote sensing technologies, tremendous progress has been made in applying space-based and airborne data and products in solving real societal problems. Several of these problems, such as coastal zone erosion, air quality, severe weather, water availability and quality, public health, fires, land slides and others are intricately related; and in the long run can have serious consequences if not properly addressed by scientists, regulatory bodies and policy makers. Although it is a much involved and tangled web to unravel, nevertheless we have an excellent start in understanding some of the phenomena and hopefully can mitigate some of the severe effects by advancing our scientific knowledge. This paper briefly discusses the applications of remote sensing data from Terra, Aqua, and other NASA satellites how to deal with such complex problems; it provides an excellent start.

Habib, Shahid↗

Observation Denial and Performance of a Local Mesoscale Model

Forecasters at the 45th Weather Squadron (45 WS) use observations from the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) wind tower network and the CCAFS (XMR) daily rawinsonde observations (RAOB) to issue and verify wind advisories and warnings for operations. These observations are also used by the Spaceflight Meteorology Group (SMG) in Houston, Texas and the Melbourne, Florida National Weather Service office to initialize their locally run mesoscale models. SMG also uses the observations to support shuttle landings at the KSC Shuttie Landing Facility. Due to impending budget cuts, some or all of the KSC/CCAFS wind towers on the east-central Florida mainland and the XMR RAOBs may be eliminated. The loss of these data may impact the forecast capability of the 45 WS and SMG. The Applied Meteorology Unit (AMU) was tasked to conduct a modeling study to determine how important these observations are to the accuracy of the model output used by the forecasters as input to their forecasts. To accomplish this, the AMU performed a sensitivity study using the Weather Research and Forecasting (NRF) model initialized with and without KSC/CCAFS wind tower and XMR RAOB observations. The AMU assessed the accuracy of model output by comparing peak wind forecasts with operationally significant wind advisory and warning criteria forecast by the 45 WS. To assess model performance when initialized with and without some of the wind tower and XMR RAOB observations, the AMU conducted a subjective analysis by displaying model wind forecasts graphically with the observations overlaid for comparison and they conducted an objective analysis by comparing the maximum peak wind forecast to the maximum peak wind observed within the KSC/CCAFS wind tower network. Data were collected for twelve warm season cases and eight cool season cases from June - September 2007 and November - January 2008, respectively. For each case chosen, the 45 WS must have issued a wind advisory or warning for the KSC/CCAFS area and the KSC/CCAFS wind towers must have recorded significant wind events, or winds greater than 18 kt.

Watson, Leela R.↗

Environmental Consequences of Big Nasty Impacts on the Early Earth

The geological record of the Archean Earth is spattered with impact spherules from a dozen or so major cosmic collisions involving Earth and asteroids or comets (Lowe, Byerly 1986, 2015). Extrapolation of the documented deposits suggests that most of these impacts were as big or bigger than the Chicxulub event that famously ended the reign of the thunder lizards. As the Archean impacts were greater, the environmental effects were also greater. The number and magnitude of the impacts is bounded by the lunar record. There are no lunar craters bigger than Chicxulub that date to Earth's mid-to-late Archean. Chance dictates that Earth experienced no more than approximately 10 impacts bigger than Chicxulub between 2.5 billion years and 3.5 2.5 billion years, the biggest of which were approximately30-100 times more energetic, comparable to the Orientale impact on the Moon (1x10 (sup 26) joules). To quantify the thermal consequences of big impacts on old Earth, we model the global flow of energy from the impact into the environment. The model presumes that a significant fraction of the impact energy goes into ejecta that interact with the atmosphere. Much of this energy is initially in rock vapor, melt, and high speed particles. (i) The upper atmosphere is heated by ejecta as they reenter the atmosphere. The mix of hot air, rock vapor, and hot silicates cools by thermal radiation. Rock raindrops fall out as the upper atmosphere cools. (ii) The energy balance of the lower atmosphere is set by radiative exchange with the upper atmosphere and with the surface, and by evaporation of seawater. Susequent cooling is governed by condensation of water vapor. (iii) The oceans are heated by thermal radiation and rock rain and cooled by evaporation. Surface waters become hot and salty; if a deep ocean remains it is relatively cool. Subsequently water vapor condenses to replenish the oceans with hot fresh water (how fresh depending on continental weathering, which might be rather rapid under the circumstances). (iv) The surface temperature of dry land is presumed to be the same as the lower atmosphere. A thermal wave propagates into the land at a rate set by conduction. Impacts not greatly larger than Chicxulub can raise the surface temperature by tens, hundreds, or even thousands of degrees, and evaporate meters to hundreds of meters of water. The biggest should have vitrified exposed dry land. More results are for the talk, as here we have run out of space.

asteroids↗

Environmental Consequences of Big Nasty Impacts on the Early Earth

The geological record of the Archean Earth is spattered with impact spherules from a dozen or so major cosmic collisions involving Earth and asteroids or comets (Lowe, Byerly 1986, 2015). Extrapolation of the documented deposits suggests that most of these impacts were as big or bigger than the Chicxulub event that famously ended the reign of the thunder lizards. As the Archean impacts were greater, the environmental effects were also greater. The number and magnitude of the impacts is bounded by the lunar record. There are no lunar craters bigger than Chicxulub that date to Earth's mid-to-late Archean. Chance dictates that Earth experienced no more than approximately 10 impacts bigger than Chicxulub between 2.5 billion years and 3.5 billion years, the biggest of which were approximately 30-100 times more energetic, comparable to the Orientale impact on the Moon (1x10 (sup 26) joules). To quantify the thermal consequences of big impacts on old Earth, we model the global flow of energy from the impact into the environment. The model presumes that a significant fraction of the impact energy goes into ejecta that interact with the atmosphere. Much of this energy is initially in rock vapor, melt, and high speed particles. (i) The upper atmosphere is heated by ejecta as they reenter the atmosphere. The mix of hot air, rock vapor, and hot silicates cools by thermal radiation. Rock raindrops fall out as the upper atmosphere cools. (ii) The energy balance of the lower atmosphere is set by radiative exchange with the upper atmosphere and with the surface, and by evaporation of seawater. Susequent cooling is governed by condensation of water vapor. (iii) The oceans are heated by thermal radiation and rock rain and cooled by evaporation. Surface waters become hot and salty; if a deep ocean remains it is relatively cool. Subsequently water vapor condenses to replenish the oceans with hot fresh water (how fresh depending on continental weathering, which might be rather rapid under the circumstances). (iv) The surface temperature of dry land is presumed to be the same as the lower atmosphere. A thermal wave propagates into the land at a rate set by conduction. Impacts not greatly larger than Chicxulub can raise the surface temperature by tens, hundreds, or even thousands of degrees, and evaporate meters to hundreds of meters of water. The biggest should have vitrified exposed dry land. More results are for the talk, as here we have run out of space.

Archean Earth↗

EVALUATION OF ACOUSTIC SNAPSHOT ARRAYS FOR ROTORCRAFT SOURCE NOISE CHARACTERIZATION

Historical development of acoustic hemispheres has required steady flight of a rotorcraft vehicle across a large linear array of microphones. The US Army, NASA, and Navy recently conducted a rotorcraft acoustics flight test in which multiple “snapshot” microphone arrays were used alongside a traditional linear microphone array. The snapshot arrays allow for a near instantaneous capture of rotorcraft acoustic emissions, without the need for steady flight. Development of the snapshot array is contained herein, and an evaluation of effectiveness of the array during adverse weather conditions. The snapshot arrays captured significant variation in acoustic emissions throughout a single run and between multiple runs of similar conditions. Hemispheres were created and modelled in land-use planning software and an investigation of A-weighted Sound Exposure Level (SEL [dBA]) was conducted. Sideline predictions of SEL compared well (within 0.1 dBA) between traditional and snapshot arrays, while centre line locations were less favourable with a difference of 1.6 dBA. Future refinement is required for the snapshot array technique, including advanced design of microphone placement and employing a semiempirical method to interpolate between measurement points, instead of the linear frequency weighting conventionally employed.

Rotorcraft↗

The Role of Subsurface Flow on Evapotranspiration: A Global Sensitivity Analysis

Abstract Water resources are impacted by water‐energy balance fluxes at the land surface, most notably evapotranspiration ( ET ), the largest component of surface energy balance. While integrated hydrologic models show promise in quantifying the nonlinear dynamics at this interface, the model results are plagued by parametric uncertainties. Given the high computational demand of running multiple parameter spaces of these models, little is known about how these uncertainties propagate into land surface processes. In this work, we perform a global sensitivity analysis by computing Sobol and AMAE indices using a surrogate model constructed with a polynomial chaos expansion to assess the impacts of the subsurface physical properties on ET . We do so by modeling a semisynthetic test case. Our results show that the effects of vertical hydraulic conductivity, porosity, and the water retention curve parameter Van Genuchten α mainly control ET . However, we note that while evaporation ( E ) shows behavior similar to the ET with high sensitivity to the parameters controlling the flow in the unsaturated zone, transpiration ( T ) is very sensitive to the saturated zone parameters and groundwater flow, especially during periods without rain. Our results also show that heterogeneities in land cover impact the flow in the saturated zone. Furthermore, our work demonstrates that reduced‐order models can be developed to make integrated models more accessible for rigorous sensitivity analyses and calibration purposes.

Maina, Fadji Zaouna↗

Steerable Hopping Six-Legged Robot

The figure depicts selected aspects of a six-legged robot that moves by hopping and that can be steered in the sense that it can be launched into a hop in a controllable direction. This is a prototype of hopping robots being developed for use in scientific exploration of rough terrain on remote planets that have surface gravitation less than that of Earth. Hopping robots could also be used on Earth, albeit at diminished hopping distances associated with the greater Earth gravitation. The upper end of each leg is connected through two universal joints to an upper and a lower hexagonal frame, such that the tilt of the leg depends on the relative position of the two frames. Two non-back-driveable worm-gear motor drives are used to control the relative position of the two frames along two axes 120 apart, thereby controlling the common tilt of all six legs and thereby, further, controlling the direction of hopping. Each leg includes an upper and a lower aluminum frame segment with a joint between them. A fiberglass spring, connected via hinges to both segments, is used to store hopping energy prior to launch into a hop and to cushion the landing at the end of the hop. A cable for loading the spring is run into each leg through the center of the universal joints and then down along the center lines of the segments to the lower end of the leg. A central spool actuated by a motor with a harmonic drive and an electromagnetic clutch winds in all six cables to compress all six springs (thereby also flexing all six legs) simultaneously. To ensure that all the legs push off and land in the same direction, timing- belt pulley drives are attached to the leg segments, restricting the flexing and extension of all six legs to a common linear motion. In preparation for a hop, the spool can be driven to load the spring legs by an amount corresponding to a desired hop distance within range. The amount of compression can be computed from the reading of a shaft-angle encoder that indicates the amount by which the spool has been turned. When the robot is ready to hop, the electromagnetic clutch disengages the motor from the spool, thus releasing the cable restraints on the springs and allowing the springs to extend all six legs simultaneously.

Younse, Paulo↗

Development of an Operational Land Water Mask for MODIS Collection 6, and Influence on Downstream Data Products

Data from the Moderate Resolution Imaging Spectro-radiometer (MODIS)on-board the Earth Observing System Terra and Aqua satellites are processed using a land water mask to determine when an algorithm no longer needs to be run or when an algorithm needs to follow a different pathway. Entering the fourth reprocessing (Collection 6 (C6)) the MODIS team replaced the 1 km water mask with a 500 m water mask for improved representation of the continental surfaces. The new water mask represents more small water bodies for an overall increase in water surface from 1 to 2 of the continental surface. While this is still a small fraction of the overall global surface area the increase is more dramatic in certain areas such as the Arctic and Boreal regions where there are dramatic increases in water surface area in the new mask. MODIS products generated by the on-going C6 reprocessing using the new land water mask show significant impact in areas with high concentrations of change in the land water mask. Here differences between the Collection 5 (C5) and C6 water masks and the impact of these differences on the MOD04 aerosol product and the MOD11 land surface temperature product are shown.

Carroll, M. L.↗

Historical global Earth System Model simulations with E3SM's dynamic root module

This data package contains global-scale Earth System Model simulations run with DOE's E3SM Model. The package includes one set of simulations run in the default configuration and a second set of simulations run with the dynamic root module enabled. These two datasets can be used to assess the impact that dynamic roots have on Land Surface fluxes such as carbon and water. The outputs are provided here on a 0.5 x 0.5 global grid at monthly resolution. The simulations were run with atmospheric forcing from the Global Soil Wetness Project. We provide specifically here Gross Primary Production, Transpiration, relative root fraction per soil layer as well as Air Temperature, Precipitation and all the parameterizations used for the simulations. Our purpose for generating and analyzing these simulations was to assess the role that root dynamics and foraging for water has in the recovery timescale of ecosystems following climate perturbation. All data provided are in the "netcdf" format using standard CF-1 (Climate and Forecast) Convention. The data are broken up into 20 year chunks to facilitate easier read-in. The data are all machine readable using various software platforms including Matlab, NCO, Panoply and GrADS.

54 ENVIRONMENTAL SCIENCES↗

Air-cushion landing systems

Computer program based on heave/pitch analysis simulates dynamic behavior during landing impact and taxi over irregular runway. Program can be adapted to run on any computer with FORTRAN compiler.

Captain, K. M.↗

Experimental investigation of the aerodynamic effects of distributed spanwise blowing on a fighter configuration

The results of wind tunnel tests at NASA Langley targeted at the performance and configurational characteristics of 0.1 and 0.13 scale model spanwise blowing (SWB) jet wing concepts are reported. The concept involves redirection of engine compressor bleed air to provide SWB at the fuselage-wing juncture near the wing leading edge. The tests covered the orientation of the outer panel nozzles, the effects of SWB operation on the performance of leading and trailing edge flaps and the effects of SWB on lateral stability. The trials were run at low speeds and angles of attack from 24-45 deg (landing). Both lift and longitudinal stability improved with the SWB, stall and leading edge vortex breakdown were delayed and performance increased with the SWB rate. Lateral stability was degraded below 20 deg angle of attack while instabilities were delayed above 20 deg due to roll damping.

Huffman, J. K.↗

What is Going on Around Cloud Edges: A View from Above and Below

tend to produce the greatest precipitation enhancements. Further analysis of the response over the U.S. to the Pacific forcing highlights a number of noteworthy and to some extent unexpected results. These include a seasonal dependence of the precipitation response that is characterized by signal-to-noise ratios that peak in spring, and surface temperature signal-to-noise ratios that are both lower and show less agreement among the models than those found for the precipitation response. Another interesting result concerns what appears to be a substantially different character in the surface temperature response over the U.S. to the Pacific forcing by the only model examined here that was developed for use in numerical weather prediction. The response to the positive SST trend forcing pattern is an overall surface warming over the world's land areas with substantial regional variations that are in part reproduced in runs forced with a globally uniform SST trend forcing. The precipitation response to the trend forcing is weak in all the models.

Marshak, Alexander↗

Impact of Local Sensors

Forecasters at the 45th Weather Squadron (45 WS) use observations from the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) wind tower network and the CCAFS (XMR) daily rawinsonde observations (RAOB) to issue and verify wind advisories and warnings for operations. These observations are also used by the National Weather Service (NWS) Spaceflight Meteorology Group (SMG) in Houston, Texas and the NWS Melbourne, Florida (NWS MLB) to initialize their locally-run mesoscale models. In addition, SMG uses these observations to support shuttle landings at the Shuttle Landing Facility (SLF). Due to impending budget cuts, some or all of the KSC/CCAFS wind towers on the east-central Florida mainland and the XMR RAOBs may be eliminated. The locations of the mainland towers and XMR RAOB site are shown in Figure I. The loss of these data may impact the forecast capability of the 45 WS, SMG and NWS MLB. The AMU was tasked to conduct an objective independent modeling study to help determine how important these observations are to the accuracy of the model output used by the forecasters. To accomplish this, the Applied Meteorology Unit (AMU) performed a sensitivity study using the Weather Research and Forecasting (WRF) model initialized with and without KSC/CCAFS wind tower and XMR RAOB data.

Watson, Leela R.↗

Ditching Investigation of a 1/14-Scale Model of the XC-123 Airplane

An investigation of a 1/14 scale dynamically similar model of the XC-123 airplane was made in calm water to observe the ditching behavior and to determine the safest procedure for making an emergency water landing, The behavior of the model was determined from motion-picture records, time-history deceleration records, and visual observations, Various scale-strength simulations were made to determine if the fuselage would be damaged and, if so, to determine the extent and location, It was concluded that the airplane should be ditched at a nose-high attitude of about 140 with the landing flaps down 45 deg., The airplane will probably make a porpoising run of about 415 feet (full scale) and the maximum longitudinal decelerations will be about 1 g, The fuselage bottom probably will be damaged and the fuselage will fill with water and sink to the wing level.

Fisher, Lloyd J.↗

Observation Denial and Performance of a Local Mesoscale Model

.Forecasters at the 45th Weather Squadron (45 WS) use observations from the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) wind tower network and the CCAFS (XMR) daily rawinsonde observations (RAOB) to issue and verify wind advisories and warnings for operations. These observations are also used by the National Weather Service (NWS) Spaceflight Meteorology Group (SMG) in Houston, Texas and the NWS Melbourne, Florida (NWS MLB) to initialize their locally-run mesoscale models. In addition, SMG uses these observations to support shuttle landings at the Shuttle Landing Facility (SLF). Due to impending budget cuts, some or all of the wind towers on the east-central Florida mainland and the XMR RAOBs may be eliminated. The locations of the mainland towers and XMR RAOB site are shown in Figure 1. The loss of these data may impact the forecast capability of the 45 WS, SMG and NWS MLB.

Watson, Leela R.↗

Results from CrIS/ATMS Obtained Using an AIRS "Version-6 like" Retrieval Algorithm

We tested and evaluated Version-6.22 AIRS and Version-6.22 CrIS products on a single day, December 4, 2013, and compared results to those derived using AIRS Version-6. AIRS and CrIS Version-6.22 O3(p) and q(p) products are both superior to those of AIRS Version-6All AIRS and CrIS products agree reasonably well with each other. CrIS Version-6.22 T(p) and q(p) results are slightly poorer than AIRS over land, especially under very cloudy conditions. Both AIRS and CrIS Version-6.22 run now at JPL. Our short term plans are to analyze many common months at JPL in the near future using Version-6.22 or a further improved algorithm to assess the compatibility of AIRS and CrIS monthly mean products and their interannual differences. Updates to the calibration of both CrIS and ATMS are still being finalized. JPL plans, in collaboration with the Goddard DISC, to reprocess all AIRS data using a still to be finalized Version-7 retrieval algorithm, and to reprocess all recalibrated CrISATMS data using Version-7 as well.

CrIS ATMS↗