Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOW DENSITY GAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Optical coronal emission lines from equilibrium and cooling plasmas

A calculation has been made of the emission from gas at temperature of about 10 to the 6th K due to optical coronal lines that result from fine structure transitions within the ground states of highly ionized atoms. These lines include the Forbidden Fe X 6374-A line, the Forbidden Fe XIV 5303-A line, and many other lines from stages of ionization of S, Ca, Fe, and Ni. The calculations are valid in the limit of very low density, and apply to the diffuse gas found in supernova remnants, the interstellar medium in galaxies, and intergalactic gas. It is found that the amount of optical coronal emission produced by a given amount of cooling gas is largely unaffected by changes in element abundances (provided the proportions of heavy elements remain the same).

Graney, Christopher M.↗
NASA NTRS2004

Fibrous-Ceramic/Aerogel Composite Insulating Tiles

Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at normal atmospheric pressure is not much greater than that of the fibrous ceramic alone in a vacuum.

White, Susan M.↗
NASA NTRS1998

High-Density Plasma Reactors: Simulations for Design

The development of improved and more efficient plasma reactors is a costly process for the semiconductor industry. Until five years ago, the Industry made most of its advancements through a trial and error approach. More recently, the role of computational modeling in the design process has increased. Both conventional computational fluid dynamics (CFD) techniques like Navier-Stokes solvers as well as particle simulation methods are used to model plasma reactor flowfields. However, since high-density plasma reactors generally operate at low gas pressures on the order of 1 to 10 mTorr, a particle simulation may be necessary because of the failure of CFD techniques to model rarefaction effects. The direct simulation Monte Carlo method is the most widely accepted and employed particle simulation tool and has previously been used to investigate plasma reactor flowfields. A plasma DSMC code is currently under development at NASA Ames Research Center with its foundation as the object-oriented parallel Cornell DSMC code, MONACO. The present investigation is a follow up of a neutral flow investigation of the effects of process parameters as well as reactor design on etch rate and etch rate uniformity. The previous work concentrated on silicon etch of a chlorine flow in a configuration typical of electron cyclotron resonance (ECR) or helical resonator type reactors. The effects of the plasma on the dissociation chemistry were modeled by making assumptions about the electron temperature and number density. The electrons or ions themselves were not simulated.The present work extends these results by simulating the charged species.The electromagnetic fields are calculated such that power deposition is modeled self-consistently. Electron impact reactions are modeled along with mechanisms for charge exchange. An bipolar diffusion assumption is made whereby electrons remain tied to the ions. However, the velocities of tile electrons are allowed to be modified during collisions and are not confined to a Maxwellian distribution. The interaction between the neutral flow and plasma is examined, and results for etch rate uniformity from the previous research and the present plasma simulations are compared.

Hash, David B.↗
NASA NTRS1988

Hydromagnetic wave heating of the low-density interstellar medium

A simple model for supernova remnant sources of MHD waves is used to calculate the energy spectrum of waves in the intercloud medium and the heating rate resulting from their dissipation. Models of thermal phases of interstellar gas in ionization and thermal equilibrium are then constructed, and it is demonstrated that wave dissipation can be an important heating mechanism which can account for the observed high H I temperatures in low-density (intercloud) neutral gas.

Ferriere, Katia M.↗
NASA NTRS1979

The dynamics and stability of radiatively driven gas clouds. I - Plane-parallel slabs

A combination of numerical and analytical techniques has been used to investigate the dynamics and stability of optically thin plane-parallel radiatively driven slabs of gas confined by the thermal gas pressure of a high-temperature low-density medium. Scaling laws allow the individual model 'clouds' to be characterized by a single free parameter, chi, a normalized column density which measures the strength of the acceleration due to radiation pressure relative to that due to thermal gas pressure. It is found that these clouds are stable and coherently accelerated only when chi is small. In this regime a simple slab model is constructed which accurately reproduces the more complex gasdynamic results. The low-chi clouds are marginally able to reach the high velocities seen in the atmospheres of quasi-stellar objects, but only if their motion is subsonic with respect to the external confining medium. This implies either that the medium is extremely hot and tenuous or that it is moving outward with the clouds.

Haas, M. R.↗
NASA NTRS1977

Stark shift in ionized boron

Stark shift of the B II line at 3451 A due to plasma microfields was measured in a luminous shock tube. Line profiles, photographically recorded in second order, were compared with closeby wavelength fiduciaries from low-pressure rare-gas lamps. Electron densities for each exposure were found by fitting H-beta profiles to theoretical line shapes. Results, estimated reliable to 25-30%, are compared with theoretical predictions.

Miller, M. H.↗
NASA NTRS1978

Improved electron-beam probe for hypersonic flows

Probe uses differentially-pumped drift tube to connect high and low pressure regions thereby allowing higher gas densities to be studied. System uses higher beam voltages (50 kV) and currents (1 mA delivered to gas), and extends boundary layer penetration up to 15.2 cm, and test duration to one hour.

Mcronald, A. D.↗
NASA NTRS1980

The interstellar material in front of Chi Ophiuchus. II - Ultraviolet observations

The high-resolution UV spectrometer aboard the Copernicus satellite was used to observe the interstellar gas toward the moderately reddened star Chi Oph. The data are consistent with the hypothesis that the material in both the -6 and -12 km/s blend of gas and the -26 km/s cloud could have been affected by shock front activity, though the signatures of that activity are different in each case. These observations of the blend of gas establish that both low and high density neutral material must be present.

Frisch, P. C.↗
NASA NTRS1991

Infrared spectroscopy of a Cygnus A - Implications for the obscured active nucleus

Near-infrared spectroscopic observations of the central regions of the luminous radio galaxy Cygnus A are presented and interpreted in terms of an obscured quasar nucleus. Strong emission is detected in the molecular hydrogen lines 1-0 S(1) and 1-0 S(3), the strengths of which are accounted for through heating by the nuclear hard X-ray source. The large equivalent widths of these molecular hydrogen lines and the near-infrared narrow hydrogen recombination lines suggest that the observed nuclear continuum is strongly attenuated at 2 microns. The observed upper limit to the flux of broad Pa-alpha implies an extinction to the putative broad line region AV(BL) of at least 24 mag, and the observed continuum intensity of the nuclear point source at 2.2 microns gives an extinction of 43 +/-9 mag toward the optical-infrared continuum. These estimates are consistent with the gas column density inferred from the low-energy X-ray cutoff. Strong forbidden Si VI 1.962-micron line emission from Cygnus A is also reported.

Ward, Martin J.↗
NASA NTRS2005

Nondestructive Visualization of Defects and Crack Propagation of Shuttle-Foam

Shuttle insulating foam is a low-density closed-cell solid-gas composite. A chief barrier to understanding foam loss has been extreme difficulties in nondestructively visualizing defects of the foam that is almost transparent to x-rays. Here we show that defects, crack propagation, and cell structure can be clearly and nondestructively observed by turning the density inhomogeneity across foam structures into a source for phase contrast imaging. This provides a new powerful way to help understand foam loss.

Hu, Zheng-Wei↗
NASA NTRS1987

Models of ring galaxies. II - Extended starbursts

Numerical models of the development of star-formation bursts in collisional ring galaxies are presented. To extend the work of Appleton and Struck-Marcell (1987) target disks which have relatively high mean cloud mass and gas density are emphasized. In such cases, even relatively low mass intruder galaxies are capable of triggering intense star-formation bursts in the density waves. Although the bursts are very short-lived in any individual gas element, pressure effects stimulate neighboring gas elements to burst, which can result in a sustained enhancement in the net star-formation rate. The results are capable of explaining the high far-infrared fluxes observed in righ galaxies and provide clues to the development of starburst activity in other colliding galaxies.

Struck-Marcell, Curtis↗
NASA NTRS1994

Large-scale characteristics of interstellar dust from COBE DIRBE observations

Observations from the COBE Diffuse Infrared Background Experiment of the 140 and 240 micrometer emissions from the Galatic plane region (absolute value of b less than 10 deg) are combined with radio surveys that trace the molecular (H2), neutral atomic (H I), and extended low-density (n(sub e) approximately 10 to 100/cm(exp 3)) ionized (H II) gas phases of the interstellar medium to derive physical conditions such as the dust temperature, dust-to-gas mass ratio, and far-infrared emissivity (1) averaged over these gas phases along each line of sight and (2) within each of these three gas phases. This analysis shows large-scale longitudinal and latitudinal gradients in the dust temperature and a decrease in dust temperature with increasing Galactocentric distance. The derived dust temperatures are significantly different from those derived in similar analyses using the Infrared Astronomical Satellite (IRAS) 60 and 100 micrometer data, suggesting that small (5 A approximately less than radius approximately less than 200 A) transiently heated dust particles contribute significantly o the Galactic 60 micrometer emission. It is found that 60% to 75% of the far-infrared luminosity arises from cold (approximately 17 to 22 K) dust associated with diffuse H I clouds, 15% to 30% from cold (approximately 19 K) dust associated with molecular gas, and less than 10% from warm (approximately 29 K) dust in extended low-density H II regions, consistent with the results of the IRAS analyses of the Galactic 60 and 100 micrometer emission. Within 2 deg of longitude of the Galactic center, the derived gas-to-dust mass ratio along the line of sight, G(sub d), reverses its general trend of decreasing G(sub d) toward the inner Galaxy and increases by a factor of approximately 2 to 3 toward the Galactic center. One possible explanation for this result is that the ratio of H2 column density to (12)CO intensity is lower in the Galactic center region than in the Galactic disk.

Sodroski, T. J.↗
NASA NTRS2012

The Gas Distribution in Galaxy Cluster Outer Regions

Aims. We present the analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We exploit the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius. We perform a stacking of the density profiles to detect a signal beyond r200 and measure the typical density and scatter in cluster outskirts. We also compute the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compare our average density and scatter profiles with the results of numerical simulations. Results. As opposed to some recent Suzaku results, and confirming previous evidence from ROSAT and Chandra, we observe a steepening of the density profiles beyond approximately r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict too steep density profiles, whereas runs including additional physics and/or treating gas clumping are in better agreement with the observed gas distribution. We report for the first time the high-confidence detection of a systematic difference between cool-core and non-cool core clusters beyond 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only little differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the simulations. Conclusions. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Although their general behavior is in better agreement with the observations, simulations including cooling and star formation convert a large amount of gas into stars, which results in a low gas fraction with respect to the observations. Consequently, a detailed treatment of gas cooling, star formation, AGN feedback, and taking into account gas clumping is required to construct realistic models of cluster outer regions.

Eckert, D.↗
NASA NTRS2012

The Gas Distribution in the Outer Regions of Galaxy Clusters

Aims. We present our analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We have exploited the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius, We stacked the density profiles to detect a signal beyond T200 and measured the typical density and scatter in cluster outskirts. We also computed the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compared our average density and scatter profiles with the results of numerical simulations. Results. As opposed to some recent Suzaku results, and confirming previous evidence from ROSAT and Chandra, we observe a steepening of the density profiles beyond approximately r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict density profiles that are too steep, whereas runs including additional physics and/ or treating gas clumping agree better with the observed gas distribution. We report high-confidence detection of a systematic difference between cool-core and non cool-core clusters beyond approximately 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond approximately r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only small differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the ENZO simulations. Conclusions. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Although their general behavior agrees more closely with the observations, simulations including cooling and star formation convert a large amount of gas into stars, which results in a low gas fraction with respect to the observations. Consequently, a detailed treatment of gas cooling, star formation, AGN feedback, and consideration of gas clumping is required to construct realistic models of the outer regions of clusters.

Eckert, D.↗
NASA NTRS2011

Observational and Numerical Diagnostics of Galaxy Cluster Outer Regions

Aims. We present the analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We exploit the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius. We perform a stacking of the density profiles to detect a signal beyond r(sub 200) and measure the typical density and scatter in cluster outskirts. We also compute the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compare our average density and scatter profiles with the results of numerical simulations. Results. As opposed to several recent results, we observe a steepening of the density profiles beyond approximately 0.3r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict too steep density profiles, whereas runs including additional physics and/or gas clumping are in better agreement with the observed gas distribution. We note a systematic difference between cool-core and non-cool core clusters beyond approximately 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond approximately r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only little differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the simulations. Conclusions. The general trend of steepening density around the virial radius indicates that the shallow density profiles found in several recent works were probably obtained along particular directions (e.g., filaments) and are not representative of the typical behavior of clusters. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Therefore, a detailed treatment of gas cooling, star formation, clumping, and AGN feedback is required to construct realistic models of cluster outer regions.

Eckert, D.↗
NASA NTRS1987

Study of non-equilibrium transport phenomena

Nonequilibrium phenomena due to real gas effects are very important features of low density hypersonic flows. The shock shape and emitted nonequilibrium radiation are identified as the bulk flow behavior parameters which are very sensitive to the nonequilibrium phenomena. These parameters can be measured in shock tubes, shock tunnels, and ballistic ranges and used to test the accuracy of computational fluid dynamic (CFD) codes. Since the CDF codes, by necessity, are based on multi-temperature models, it is also desirable to measure various temperatures, most importantly, the vibrational temperature. The CFD codes would require high temperature rate constants, which are not available at present. Experiments conducted at the NASA Electric Arc-driven Shock Tube (EAST) facility reveal that radiation from steel contaminants overwhelm the radiation from the test gas. For the measurement of radiation and the chemical parameters, further investigation and then appropriate modifications of the EAST facility are required.

Sharma, Surendra P.↗