Search NASA⌕ Search

SEARCH · Search NASA

Results for “LU factorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Overexpression of a novel transcriptional repressor GmMYB3a negatively regulates salt–alkali tolerance and stress-related genes in soybean

Highlights: • We identified and characterized GmMYB3a of R2R3 myeloblastosis repressor family. • GmMYB3a is induced by various abiotic stresses. • For this study, we used a transgenic soybean over-expressing GmMYB3a. • We evaluated the photosynthesis index under salt-alkali treatments. • GmMYB3a was found to negatively affect the response of plants to salt stress. Myeloblastosis (MYB) transcription factor (TF) plays a positive role in the growth and stress response of plants; however, information on the functions of MYB repressors in soybean is limited. In the present study, the gene GmMYB3a was identified and characterized as a member of the R2R3 MYB repressor family, which is induced by various abiotic stresses. To understand the functions of GmMYB3a, a transgenic soybean over-expressing GmMYB3a was obtained and the photosynthetic index under salt–alkali treatments was evaluated. The transgenic line exhibited a series of negative regulation relative to the wild-type control. Quantitative real time polymerase chain reaction revealed that the physiological parameters, including soluble sugar, free proline, and chlorophyll contents; and photosynthetic rate decreased in the transgenic plants. Furthermore, GmMYB3a overexpression down-regulated a set of key genes associated with plant defense signal pathways. These finding suggest that GmMYB3a negatively affects the response of plants to salt stress.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Ultrafine Interwoven Dendritic Cu 2 Se/CuFeSe 2 Composites with Enhanced Thermoelectric Performance

As an effort to develop high-performance and stable copper chalcogenide thermoelectrics, several (1-x)Cu 2 Se/(x)CuFeSe 2 composites were successfully synthesized via a one-step solid-state transformation of CuSe 2 template. Uniform ultrafine dendritic structures consisting of interweaving Cu 2 Se and CuFeSe 2 nanofibers were observed in samples with low Fe content (0.05 ≤ x ≤ 0.1). Increasing the Fe content to x = 0.5 led to phase segregation into Cu 2 Se-rich region with embedded CuFeSe 2 fine structures interwoven with CuFeSe 2 -rich region containing Cu 2 Se nanofibers. The formation of such an entwined dendritic structure is believed to arise from the temperature-dependent solubility of CuFeSe 2 in the Cu 2 Se matrix. The dynamic dissolution of CuFeSe 2 into the Cu 2 Se at high temperatures leads to temperature-dependent doping of the Cu 2 Se matrix, enabling drastic enhancements of thermoelectric power factor at high temperatures. As a result, such a strategy is expected to be a powerful tool for properties modulation in thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mitigation of nitrogen vacancy photoluminescence quenching from material integration for quantum sensing

The nitrogen-vacancy (NV) color center in diamond has demonstrated great promise in a wide range of quantum sensing. Recently, there have been a series of proposals and experiments using NV centers to detect spin noise of quantum materials near the diamond surface. This is a rich complex area of study with novel nano-magnetism and electronic behavior, that the NV center would be ideal for sensing. However, due to the electronic properties of the NV itself and its host material, getting high quality NV centers within nanometers of such systems is challenging. Band bending caused by space charges formed at the metal-semiconductor interface force the NV center into its insensitive charge states. Here, we investigate optimizing this interface by depositing thin metal films and thin insulating layers on a series of NV ensembles at different depths to characterize the impact of metal films on different ensemble depths. We find an improvement of coherence and dephasing times we attribute to ionization of other paramagnetic defects. The insulating layer of alumina between the metal and diamond provide improved photoluminescence and higher sensitivity in all modes of sensing as compared to direct contact with the metal, providing as much as a factor of 2 increase in sensitivity, decrease of integration time by a factor of 4, for NV T 1 relaxometry measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2019

QP Statistics Spotlight: Practical versus Statistical Priorities

Randomization during data collection in a designed experiment is an effective strategy for reducing system bias and ensuring independent observations1, but at what cost should it be fully implemented? We recently encountered a scenario that highlights an important aspect of collaboration2 between statisticians, scientists and engineers – the idea of compromise for the sake of achieving wins for all team members. In a multi-million-dollar experiment with a fixed amount of time on the test equipment, each experimental run involved resetting the input values and then waiting for the continuous process to reach a new equilibrium. For example, the temperature of the furnace could be reset, but it takes some time for the test chamber to reach the new temperature and rest at that temperature for a while until all components in the chamber settle at that new setting. Similarly, a critical gas flow component also required a settling period before data could be collected that would be representative of that input setting value. In all, the experiment involved 5 factors, where 4 of the 5 were time-consuming and costly to adjust, with the duration of time needed to reach new equilibrium being dependent on how far the previous setting was from the new one for the combination of these 4 factors. For example, changing from 150° to 200° would reach equilibrium faster than changing from 100° to 200°.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Mechanical Properties and Microstructure Evolution During Bending–Unbending Deformation of Pure Titanium Sheet

In this study, the pure titanium sheets with thickness of 1 mm are deformed 1-5 times in the form of bending–unbending cyclic deformation. The bending angles before and after unbending are 120° and 180°, respectively. Mechanical properties of samples during cyclic deformation, including M/(BH){sup 2}-surface strain curve and spring back in each bending cycle, have been investigated. Moreover, the twinning/detwinning behavior and texture evolution in three typical bending layers (i.e., the tensile layer, neutral layer and compressive layer) in cyclic deformation have been tested by EBSD and TEM, and analyzed systematically. The results indicate that the most intensive twins, consist of similar proportion of tensile and compressive ones, distribute in the inner layer after 1st bending. While they disappear almost entirely after 1st unbending. The twins in outer layer could also be detwinned, and the new twins could be activated during 1st unbending. Besides, the twin density increases obviously and the residual twins could not be detwinned clearly after multiple passes of cyclic deformation. Moreover, the Schmid factor along the σ{sub 2} direction functions in the activation of twin variants regardless of the three-direction stress states.

36 MATERIALS SCIENCE↗
NASA NTRS1998

Numerical Procedures for Inlet/Diffuser/Nozzle Flows

Two primitive variable, pressure based, flux-split, RNS/NS solution procedures for viscous flows are presented. Both methods are uniformly valid across the full Mach number range, Le., from the incompressible limit to high supersonic speeds. The first method is an 'optimized' version of a previously developed global pressure relaxation RNS procedure. Considerable reduction in the number of relatively expensive matrix inversion, and thereby in the computational time, has been achieved with this procedure. CPU times are reduced by a factor of 15 for predominantly elliptic flows (incompressible and low subsonic). The second method is a time-marching, 'linearized' convection RNS/NS procedure. The key to the efficiency of this procedure is the reduction to a single LU inversion at the inflow cross-plane. The remainder of the algorithm simply requires back-substitution with this LU and the corresponding residual vector at any cross-plane location. This method is not time-consistent, but has a convective-type CFL stability limitation. Both formulations are robust and provide accurate solutions for a variety of internal viscous flows to be provided herein.

Rubin, Stanley G.↗
DOE OSTI2017

Tisp40 deficiency attenuates renal ischemia reperfusion injury induced apoptosis of tubular epithelial cells

Renal ischemia reperfusion (IR) is a major cause of acute kidney injury (AKI) and no effective treatments have been established. Tisp40 is a transcription factor of the CREB/ATF family and involves in cell apoptosis, proliferation and differentiation, but its role in renal IR remains unknown. Here, we investigated the role of Tisp40 in renal IR injury. In vivo, Tisp40 knockout (KO) and wild-type (WT) mice were subjected to thirty minutes of bilateral renal ischemia and 48 h reperfusion, the blood and kidneys were harvested for analysis. In vitro, Tisp40 overexpression and vector cells were subjected to hypoxia/reoxygenation (HR), the apoptosis rate and the expressions of related proteins were measured. Following IR, the expressions of Tisp40 protein, serum creatinine (sCr), blood urea nitrogen (BUN) and apoptosis of tubular cells were significantly increased in WT mice. However, Tisp40 deficiency significantly attenuated the increase of sCr, BUN and apoptosis of tubular cells. Following HR, apoptosis of tubular cells was increased in Tisp40 overexpression cells compared with vector cells. Mechanistically, Tisp40 promoted the expressions of C/EBP homologous protein (CHOP), Bax and Cleaved caspase3 and suppressed the expression of Bcl-2 in renal IR injury. In conclusion, Tisp40 aggravates tubular cells apoptosis in renal IR injury. - Highlights: • Tisp40 is induced in renal ischemia reperfusion. • Tisp40 knockout attenuates renal dysfunctions and tubular cell apoptosis. • Tisp40 overexpression increases tubular cell apoptosis in hypoxia/reoxygenation. • Tisp40 promotes CHOP mediated cell apoptosis in renal ischemia reperfusion.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

High susceptibility to adiabatic shear banding and high dynamic strength in tungsten heavy alloys with a high-entropy alloy matrix

The susceptibility to adiabatic shear banding (ASB) of tungsten heavy alloys (WHAs) is a key factor to determine their penetration performance for kinetic energy penetrators (KEPs). This work reports a novel WHA with strong susceptibility to ASB that uses a precipitation-hardening high-entropy alloy (HEA) as the binding phase of W particles. The results find that nanoscale L12 precipitates and high dislocation density in the matrix contribute a high dynamic yield strength of ~2300 MPa. Also, a narrow ASB with a width of ~12 μm forms in the novel WHA, which is only 6% of the width of ASB in traditional WHAs like W-NiFe, exhibiting a great susceptibility to ASB. The redissolution of precipitates into the matrix because of temperature rise during shearing could sharply soften the shearing location, which is suggested to be a very important factor of destabilizing mechanism to promote the development of ASB.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of aging treatment on microstructures, tensile properties and intergranular corrosion behavior of Al–Cu–Li alloy

Highlights: • T8 duplex aging greatly promoted the precipitation of strengthening phases. • Heavy precipitation of strengthening phases led to enhancing of tensile properties. • Intergranular corrosion sensibility can be reduced by T8 duplex aging greatly. - Abstract: The influence of aging treatment on microstructures, tensile properties and corrosion properties of Al–Cu–Li alloy was investigated. The results show that the T8 duplex aging treatment was more effective than T6 and T8 single aging treatment in enhancing the tensile properties and improving the intergranular corrosion (IGC) resistance. Based on the microstructure observation, tensile test, electrochemical experiment and IGC measurement, the factors which affect the microstructures, tensile properties and IGC behavior changing of Al–Cu–Li alloy during aging treatments were discussed in detail.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Sliding Wear and Friction Behavior of M50-Graphene Self-Lubricating Composites Prepared by Laser Additive Manufacturing at Elevated Temperature

M50 steel is widely applied to manufacture aircraft bearings where service lives are mainly determined by the friction and wear behaviors. The main purpose of this study is to investigate the tribological behaviors and wear mechanisms of M50-1.5 wt.% graphene composites (MGC) prepared by laser additive manufacturing (LAM) (MGC-LAM) sliding against Si{sub 3}N{sub 4} ball from 25 to 550 °C at 18 N–0.2 m/s. XRD, EPMA, FESEM, and EDS mapping were conducted to understand the major mechanisms leading to the improvement in the sliding behavior of MGC-LAM. The results indicated that MGC-LAM showed the excellent friction and wear performance at 25-550 °C for the lower friction coefficient of 0.16-0.52 and less wear rate of 6.1-9.5 × 10{sup −7} mm{sup 3} N{sup −1} m{sup −1}. Especially at 350 °C, MGC-LAM obtained the best tribological performance (0.16, 6.1 × 10{sup −7}mm{sup 3} N{sup −1} m{sup −1}). It was attributed to the dense coral-like microstructure, as well as the formed surface lubricating structure which is composed of the upper uniform lubricating film with massive graphene and the underneath compacted layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Examination of lutetium(III)-DOTA and copper(II)-NOTA solution structures using EXAFS

Targeted radionuclide therapy generally relies on the chelation of select short-lived isotopes such as 177 Lu and 67 Cu. The majority of Lu(III) and Cu(II) chelate structural information is derived from solid state diffraction data. Herein, the complexes Lu(DOTA) - , Cu(NOTA) - were examined in solution using EXAFS for the first time. Both ligands were fully deprotonated and coordinated to the metal with four and three carboxylic sites for Lu(DOTA) - and Cu(NOTA) - , respectively. Near-neighbor correlations from nitrogen atoms on the macrocyclic cages were also visible in the spectra in addition to the adjacent carbon backbones. Coordination numbers, bond distances, and Debye-Waller factors are reported and discussed alongside differences with known crystal structures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Aqueous passivation of multi-principal element alloy Ni 38 Fe 20 Cr 22 Mn 10 Co 10 : Unexpected high Cr enrichment within the passive film

The aqueous passivation of a non-equiatomic Ni 38 Fe 20 Cr 22 Mn 10 Co 10 - at.% (Ni 40 Fe 20 Cr 20 Mn 10 Co 10 - wt.%) multi-principal element alloy (MPEA) was investigated in 0.1 M NaCl at pH 4 and compared to a conventional binary Ni 76 Cr 24 – at.% (Ni 78 Cr 22 – wt.%) alloy. The electrochemical behavior and oxide film characteristics were explored utilizing in-situ electrochemical and ex-situ surface-sensitive techniques. The passive film composition, thickness, and elemental valence states, as well as, the fate of each element were studied by in-situ atomic emission spectro-electrochemistry, ex-situ X-ray photoelectron spectroscopy, and atom probe tomography. The Ni 38 Fe 20 Cr 22 Mn 10 Co 10 MPEA demonstrated slightly better corrosion resistance compared to the binary Ni 76 Cr 24 , alloy. Passive films on the MPEA contained primarily Cr, and small amounts of Ni, Fe, Co and Mn, while dissolution of Ni, Fe, Co was observed. Ni 0 was enriched at the oxide/metal interface while Cr was depleted. Enrichment of Cr in the passive film occurred to a greater extent in the MPEA than for the Ni-Cr binary alloy. As a result, enrichment factors were determined and the origins of enrichment are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Response of the Hydrological Cycle in Asian Monsoon Systems to Global Warming Through the Lens of Water Vapor Wave Activity Analysis

Here, the column integrated water vapor (CWV)-based local wave activity (LWA) is adapted to examine the response of the hydrological cycle and extreme of the Asian summer monsoon in CMIP5 simulations under the RCP8.5 forcing scenario. A tight linear relationship between CWV LWA (A + ) and its sink (P$ ~\atop{-}$E + ), which measures the intensity of the local hydrological cycle and extremes, affords a simple scaling framework for the hydrological cycle intensity in terms of the contributions from (i) ratio of moisture participating in the hydrological cycle, (ii) stirring length scale, (iii) background moisture gradient, and (iv) hydrological cycling rate (HCR). Future moisture LWA over the broad Asian monsoon region shows a large increase (~35%), attributable largely to the increase of the background moisture. Laslty, the scaling analysis reveals a distinct mix of the contributing factors for the increase in (P$ ~\atop{-}$E + ) between East Asian and Indian monsoon regions, despite both experiencing sizable increase of (P$ ~\atop{-}$E + ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Out-of-plane ferroelectricity and robust magnetoelectricity in quasi-two-dimensional materials

Thin-film ferroelectrics have been pursued for capacitive and nonvolatile memory devices. They rely on polarizations that are oriented in an out-of-plane direction to facilitate integration and addressability with complementary metal-oxide semiconductor architectures. The internal depolarization field, however, formed by surface charges can suppress the out-of-plane polarization in ultrathin ferroelectric films that could otherwise exhibit lower coercive fields and operate with lower power. Here, we unveil stabilization of a polar longitudinal optical (LO) mode in the n = 2 Ruddlesden–Popper family that produces out-of-plane ferroelectricity, persists under open-circuit boundary conditions, and is distinct from hyperferroelectricity. Our first-principles calculations show the stabilization of the LO mode is ubiquitous in chalcogenides and halides and relies on anharmonic trilinear mode coupling. We further show that the out-of-plane ferroelectricity can be predicted with a crystallographic tolerance factor, and we use these insights to design a room-temperature multiferroic with strong magnetoelectric coupling suitable for magneto-electric spin-orbit transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Bi-Layer Dense/Porous Solid Electrolyte Interphase for Enhanced Lithium-Metal Stability

Due to its high theoretical capacity and low electrochemical potential, lithium metal is a highly investigated anode for next-generation high-energy batteries. However, the unstable chemical and topographical heterogeneous surface of lithium gives rise to safety and efficiency concerns that prevent it from being utilized in practical applications. Exposure to electrolyte leads to non-uniform, mixed organic-inorganic solid-electrolyte interphase (SEI) formation, starting a cascading to non-uniform flux distribution, consumption of active materials, and dendrite growth. The SEI is the key feature that will lead to harnessing the capabilities possible with lithium metal. In this work, the formation of a closed-host bi-layer solid electrolyte interphase (SEI) improves the stability of lithium anode. This is successfully realized by forming an interconnected porous LiF-rich artificial SEI in contact with Li metal, and a dense, stable in-situ formed upper layer SEI. The porous layer increases the number of Li/LiF interfaces, which reduces local volume fluctuations and improves Li+ diffusion along these interfaces. Additionally, the tortuous porous structure guides uniform Li+ flux distribution and mechanically suppresses dendrite propagation. The dense upper layer of the SEI accomplishes a closed-host design through reaction with LiNO3 additive and prevents continuous consumption of active materials seen without the additive included in the electrolyte. The duality of a dense top layer with porous bottom layer led to extended cycle life and improved rate performance, evidenced with symmetric cell testing, as well as full cell testing paired with sulfur and LiFePO4 (LFP) cathodes. This work is a good example of a rational design of the SEI, based on comprehensive consideration of various critical factors to improve Li-metal anode stability, and highlights a new pathway to improve cycling and rate performances of Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Final Technical Report: Impact of Wildfires on Solar Generation, Reserves, and Energy Prices

This study quantifies the potential impacts of wildfires on the California grid, specifically the impacts under three different wildfire scenarios: a "no wildfire" scenario and two wildfire-specific scenarios, "2020 wildfire" and "enhanced wildfire" (with both wildfire scenarios assuming spatial distribution of the wildfire location the same as the 2020 fires). The study combines each scenario with two solar energy infrastructures: one corresponding to the current solar installation and the other to future (midcentury) solar installation. The analysis is conducted using state-of-the-science modeling tools: primarily WRF-Chem for atmospheric modeling with chemistry to account for impacts of wildfires on solar radiation and PLEXOS for electricity market simulations. The analysis suggests that wildfires can significantly attenuate solar radiation at both short downwind distances as well as far from the emissions sources. Although the study is limited in scope, and the analysis studies only a few of the many factors that can affect photovoltaic generation and electricity markets, it indicates that wildfire smoke is an important factor that needs to be carefully considered and analyzed in planning the future grid.

electricity market↗
DOE OSTI2021

Fermi-type particle acceleration from magnetic reconnection at the termination shock of a relativistic striped wind

An oblique-rotating pulsar generates a relativistic striped wind in a pulsar wind nebula (PWN). The termination shock of the PWN compresses the Poynting-flux-dominated flow and drives magnetic reconnection. By carrying out particle-in-cell simulations of the termination shock of the PWN, we study the shock structure as well as the energy conversion processes and particle acceleration mechanisms. With the recent advances in the numerical methods, we extend the simulations to the ultrarelativistic regime with a bulk Lorentz factor of up to γ 0 = 10 6 . Magnetic reconnection at the termination shock is highly efficient at converting magnetic energy to particle kinetic energy and accelerating particles to high energies. Similar to earlier studies, we find that the resulting energy spectra crucially depend on λ/d e (λ is the wavelength of the striped wind and de is the relativistic plasma skin depth). When λ/d e is large (λ ≳ 40d e ), the downstream particle spectra form a power-law distribution in the magnetically dominated relativistic wind regime. By analyzing particle trajectories and statistical quantities relevant to particle energization, we find that Fermi-type mechanism dominates the particle acceleration and power-law formation. We find that the results for particle acceleration are scalable as γ 0 and σ 0 increase to large values. The maximum energy for electrons and positrons can reach hundreds of TeV if the wind has a bulk Lorentz factor of γ0 ≈ 106 and a magnetization parameter of σ 0 = 10, which can explain the recent observations of high-energy gamma rays from PWNe

79 ASTRONOMY AND ASTROPHYSICS↗