Search NASA⌕ Search

SEARCH · Search NASA

Results for “LUBRICATION - FRICTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗
DOE OSTI2023

Development of low-loss minimal exposure technique for thallium foil fabrication

Despite its availability as a solid bead or ingot, non-isotopic thallium metal is no longer commercially produced as a foil because of its high toxicity. To conduct fundamental studies on the material, the Stable Isotope Materials and Chemistry Group (SIMC) at Oak Ridge National Laboratory (ORNL) was approached to develop a safe method to process thallium and produce 40 non-isotopic thallium foils. The commercially sourced metal was consolidated into an ingot by melting the material in a special tube furnace under a reducing atmosphere. The resulting ingot was cold rolled using a work-hardened, stainless-steel pack and oil lubricant before cutting the final foils to 2.5 × 2.5 cm2 area and thickness of 50–75 mg/cm2. The appropriate safeguards used at each step are outlined to ensure the safe and consistent production of high-quality foils. The low-loss process enables future requests for isotopic thallium and other hazardous and rare materials.

Conner, Jenny↗
DOE OSTI2020

Structure and dynamics of ethane confined in silica nanopores in the presence of CO 2

Fundamental understanding of the subcritical/supercritical behavior of key hydrocarbon species inside nano-porous matrices at elevated pressure and temperature is less developed compared to bulk fluids, but this knowledge is of great importance for chemical and energy engineering industries. This study explores in detail the structure and dynamics of ethane (C 2 H 6 ) fluid confined in silica nanopores, with a focus on the effects of pressure and different ratios of C 2 H 6 and CO 2 at non-ambient temperature. Quasi-elastic neutron scattering (QENS) experiments were carried out for the pure C 2 H 6 , C 2 H 6 :CO 2 = 3:1, and 1:3 mixed fluids confined in 4-nm cylindrical silica pores at three different pressures (30 bars, 65 bars, and 100 bars) at 323 K. Two Lorentzian functions were required to fit the spectra, corresponding to fast and slow translational motions. No localized motions (rotations and vibrations) were detected. Higher pressures resulted in hindrances of the diffusivity of C 2 H 6 molecules in all systems investigated. Pore size was found to be an important factor, i.e., the dynamics of confined C 2 H 6 is more restricted in smaller pores compared to the larger pores used in previous studies. Molecular dynamics simulations were performed to complement the QENS experiment at 65 bars, providing supportive structure information and comparable dynamic information. The simulations indicate that CO 2 molecules are more strongly attracted to the pore surface compared to C 2 H 6 . The C 2 H 6 molecules interacting with or near the pore surface form a dense first layer (L1) close to the pore surface and a second less dense layer (L2) extending into the pore center. Both the experiments and simulations revealed the role that CO 2 molecules play in enhancing C 2 H 6 diffusion (“molecular lubrication”) at high CO 2 :C 2 H 6 ratios. The energy scales of the two dynamic components, fast and slow, quantified by both techniques, are in very good agreement. Herein, the simulations identified the fast component as the main contributor to the dynamics. Molecule motions in the L2 region are mostly responsible for the dynamics (fast and slow) that can be detected by the instrument.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Order-disorder in room-temperature ionic liquids probed via methyl quantum tunneling

Room-temperature ionic liquids are promising candidates for applications ranging from electrolytes for energy storage devices to lubricants for food and cellulose processing to compounds for pharmaceutics, biotransformation, and biopreservation. Due to the ion complexity, many room-temperature ionic liquids readily form amorphous phases upon cooling, even at modest rates. Here, we investigate two commonly studied imidazolium-based room-temperature ionic liquids, 1-ethyl-3-methylimidazolium tetrafluoroborate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, as well as their mixtures, to demonstrate how the complex interplay between the crystalline and amorphous phases is affected by the processing conditions, such as thermal history, liquid mixing, and applied pressure. We show that quantum tunneling in the cation methyl groups, measured by high-resolution inelastic neutron scattering, can be used to probe the order-disorder in room-temperature ionic liquids (crystalline vs amorphous state) that develops as a result of variable processing conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Fluctuating hydrodynamics and the Rayleigh–Plateau instability

The Rayleigh–Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to interfacial energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics (MD), and stochastic partial differential equation–based hydrodynamic models, such as stochastic lubrication theory. In this paper, we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh–Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in MD simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally, we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface tension–driven phenomena.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Bridging microscopic dynamics and rheology in the yielding of charged colloidal suspensions

The yielding of soft materials is critical to many natural and industrial processes, yet experimental insights into microscopic aspects of yielding are limited. This study combines angle X-ray scattering, X-ray photon correlation spectroscopy, and in situ rheology (Rheo-SAXS-XPCS) with fast lubrication dynamics simulations to examine how interparticle interactions influence yielding in charged colloidal suspensions. By tuning attraction through salt addition, we compare repulsive and attractive systems under deformation. Repulsive suspensions yield uniformly with Andrade-like creep and minimal structural change. In contrast, attractive suspensions show complex behaviors, including shear banding, delayed yielding, and resolidification, governed by transient dynamics at shear band interfaces. These results directly link microscopic particle dynamics to macroscopic flow and demonstrate how interaction potentials control rheological behavior. This work offers a framework for designing soft materials with tailored properties for applications in coatings, food processing, drug delivery, and other technologies requiring precise mechanical control.

Molecular Dynamics Simulation↗
DOE OSTI2024

Energy and nutrient recovery from municipal and industrial waste and wastewater—a perspective

This publication highlights the latest advancements in the field of energy and nutrient recovery from organics rich municipal and industrial waste and wastewater. Energy and carbon rich waste streams are multifaceted, including municipal solid waste, industrial waste, agricultural by-products and residues, beached or residual seaweed biomass from post-harvest processing, and food waste, and are valuable resources to overcome current limitations with sustainable feedstock supply chains for biorefining approaches. The emphasis will be on the most recent scientific progress in the area, including the development of new and innovative technologies, such as microbial processes and the role of biofilms for the degradation of organic pollutants in wastewater, as well as the production of biofuels and value-added products from organic waste and wastewater streams. The carboxylate platform, which employs microbiomes to produce mixed carboxylic acids through methane-arrested anaerobic digestion, is the focus as a new conversion technology. Nutrient recycling from conventional waste streams such as wastewater and digestate, and the energetic valorization of such streams will also be discussed. The selected technologies significantly contribute to advanced waste and wastewater treatment and support the recovery and utilization of carboxylic acids as the basis to produce many useful and valuable products, including food and feed preservatives, human and animal health supplements, solvents, plasticizers, lubricants, and even biofuels such as sustainable aviation fuel.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Comment on “Brownian motion of droplets induced by thermal noise”

We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. [Phys. Rev. E 109, 024208 (2024)2470-004510.1103/PhysRevE.109.024208]. Specifically, we find that capillary wave statistics at thermodynamic equilibrium are independent of transport properties, namely viscosity and species diffusion.

Bell, J B↗
DOE OSTI2021

Identification and analysis of stem‐specific promoters from sugarcane and energy cane for oil accumulation in their stems

Abstract Considerable recent progress has been achieved in bioengineering oil accumulation in the vegetative tissues of plants, opening an opportunity for large scale production of biodiesel, jet fuel, lubricants, and high‐value lipid bioproducts. For the highly productive C4 crops, such as sugarcane, energy cane, Miscanthus, and fiber sorghums, the bulk of the biomass is the stem. However, little success has been made in accumulating oil in the stem. Since engineering a trait with a constitutive promoter often results in pleiotropic effects that counter trait improvement, identification of stem parenchyma‐specific promoters is a prerequisite for efficient use of the ample photoassimilates stored in mature stem parenchyma cells. In this study, we first identified two TST genes encoding homologues of tonoplast sugar transporters that were strongly and almost exclusively expressed in the stems of canes via a combination of RNA‐seq atlas analysis, in silico analysis of a sugarcane genome, phylogenetic analysis, and quantitative PCR analysis. They were further confirmed in the pith parenchyma cells of the mature stem by RNA in situ hybridization. When fused with the β‐Glucuronidase (GUS) reporter gene, the promoters of two alleles, TST2b‐1A and TST2b‐1C , from one TST gene demonstrated that they could drive the GUS expression exclusively in the stem in Arabidopsis.

09 BIOMASS FUELS↗
DOE OSTI2021

Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Design and Proof of Concept Testing

The following paper presents a new type of gas lubricated thrust bearing that utilizes additive manufacturing or also known as direct metal laser melting (DMLM) to fabricate the bearing. The motivation for the new bearing concept is derived from the need for highly efficient supercritical carbon dioxide (sCO2) turbomachinery in the mega-watt power range. The paper provides a review of existing gas thrust-bearing technology, outlines the need for the new DMLM concept, and discusses proof-of-concept testing results. The new concept combines hydrostatic pressurization with individual tilting pads that are flexibly mounted using hermetic squeeze film dampers (HSFD) in the bearing-pad support. This paper describes the thrust-bearing concept and discusses the final design approach. Proof-of-concept testing in air for a 6.8 in. (173 mm) outer diameter thrust gas bearing was performed; with thrust loading, up to 1500 lbs (6.67 kN) and a thrust runner speed of 10krpm (91 m/s tip speed). The experiments were performed with a bent shaft resulting in thrust runner axial vibration magnitudes of 2.9 mils (74 μm) p-p and dynamic thrust loads of 270 lbs (1.2 kN) p-p. In addition, force deflection characteristics and stiffness coefficients of the bearing system are presented for an inlet hydrostatic pressure of 380 psi (2.62 MPa). Results at 10 krpm show that the pad support architecture was able to sustain high levels of dynamic misalignment equaling 6 times the nominal film clearance while demonstrating a unit load-carrying capacity of 55 psi (0.34 Mpa). Gas-film force deflection tests portrayed nonlinear behavior like a hardening spring, while the bearing pad support stiffness was measured to be linear and independent of gas film thickness.

Engineering↗
DOE OSTI2022

Effects of Water Contamination on Micropitting and Rolling Contact Fatigue of Bearing Steels

Abstract In this research, the effects of water contamination in oil were investigated on two kinds of failures that occur in bearing steel: micropitting and rolling contact fatigue. Whereas the presence of water in the oil had little effect on the generation of surface wear in these experiments, increases in the occurrences of micropitting and rolling contact fatigue were observed due to the presence of either dissolved or free water in lubricants. Additionally, the presence of white etching matter at crack interfaces was observed and evaluated. The experimental results showed that water content can be considered as a significant factor that accelerates the formation of micropitting and fatigue cracks in rolling bearings.

Engineering↗
DOE OSTI2020

The genome of jojoba ( Simmondsia chinensis ): A taxonomically isolated species that directs wax ester accumulation in its seeds

Seeds of the desert shrub, jojoba ( Simmondsia chinensis ), are an abundant, renewable source of liquid wax esters, which are valued additives in cosmetic products and industrial lubricants. Jojoba is relegated to its own taxonomic family, and there is little genetic information available to elucidate its phylogeny. Here, we report the high-quality, 887-Mb genome of jojoba assembled into 26 chromosomes with 23,490 protein-coding genes. The jojoba genome has only the whole-genome triplication (γ) shared among eudicots and no recent duplications. These genomic resources coupled with extensive transcriptome, proteome, and lipidome data helped to define heterogeneous pathways and machinery for lipid synthesis and storage, provided missing evolutionary history information for this taxonomically segregated dioecious plant species, and will support efforts to improve the agronomic properties of jojoba.

Sturtevant, Drew↗
DOE OSTI2023

Electroresponse of weak polyelectrolyte brushes

Abstract End-tethered polyelectrolytes are widely used to modify substrate properties, particularly for lubrication or wetting. External stimuli, such as pH, salt concentration, or an electric field, can induce profound structural responses in weak polyelectrolyte brushes, which can be utilized to further tune substrate properties. We study the structure and electroresponsiveness of weak polyacid brushes using an inhomogeneous theory that incorporates both electrostatic and chain connectivity correlations at the Debye–Hückel level. Our calculation shows that a weak polyacid brush swells under the application of a negative applied potential, in agreement with recent experimental observation. We rationalize this behavior using a scaling argument that accounts for the effect of the surface charge. We also show that the swelling behavior has a direct influence on the differential capacitance, which can be modulated by the solvent quality, pH, and salt concentration. Graphical Abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Data for Evaluation of 1,2-Diacyl-3-Acetyl Triacylglycerol Production in Yarrowia lipolytica

Plants produce many high-value oleochemical molecules. While oil-crop agriculture is performed at industrial scales, suitable land is not available to meet global oleochemical demand. Worse, establishing new oil-crop farms often comes with the environmental cost of tropical deforestation. The field of metabolic engineering offers tools to transplant oleochemical metabolism into tractable hosts while simultaneously providing access to molecules produced by non-agricultural plants. Here, we evaluate strategies for rewiring metabolism in the oleaginous yeast Yarrowia lipolytica to synthesize a foreign lipid, 3-acetyl-1,2-diacyl-sn-glycerol (acTAG). Oils made up of acTAG have a reduced viscosity and melting point relative to traditional triacylglycerol oils making them attractive as low-grade diesels, lubricants, and emulsifiers. This manuscript describes a metabolic engineering study that established acTAG production at g/L scale, exploration of the impact of lipid bodies on acTAG titer, and a techno-economic analysis that establishes the performance benchmarks required for microbial acTAG production to be economically feasible.

Biomass Analytics↗
DOE OSTI2022

Data for Catalyst and Reactor Design Considerations for Selective Production of Acids by Oxidative Cleavage of Alkenes with H2O2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η2-O2) complexes vs. H2O2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H2O2 concentrations. Semi-batch reactors with continuous introduction of H2O2 solutions offer the means to maintain low H2O2 concentrations while providing sufficient quantities of H2O2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. This kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H2O2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H2O2 feed rate increases selectivity towards oxidative cleavage products and selective use of H2O2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semi-batch reactors with optimized molar feed rates of H2O2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H2O2 selectivity (3% to 30%). In addition, semi-batch reaction conditions used avoid H2O2-mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H2O2.

Catalysis↗
DOE OSTI2021

Discovery of AMPX Thermal Scattering Law Processing Issue for Solid Moderators

The 2020 edition of The International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook includes a newly produced plastic-moderated evaluation, identified as PU-MET-MIXED-002 and referred to as PMM002. The 2021 edition should include another new plastic-moderated experiment, HEU-MET-THERM-004, referred to as HMT-004. These evaluations are of particular interest, as PMM-002 is moderated with polyethylene, and HMT-004 is moderated with polymethyl methacrylate (Lucite), allowing for investigation of the differences in the thermal scattering laws (TSLs) available for these materials. ENDF/B-VIII.0 includes newly produced data for 1 H-based scattering materials, including Lucite and yttrium hydride. Other available 1 H TSLs include polyethylene, light water, zirconium hydride. The unbound 1 H (free-gas) cross sections were also used. ENDF/B-VIII.0 also includes revisions made to the ENDF/B-VII.1 light water and polyethylene evaluations. Zirconium hydride was unchanged from ENDF/B-VII.1. As of this writing, there are no benchmarks included in the Verified, Archived Library of Inputs and Data (VALID) that are primarily moderated with any solid moderator, so validation that includes the PMM-002 and HMT-004 evaluations would expand the coverage to two new moderators. A study was undertaken at Oak Ridge National Laboratory with two purposes: to provide validation data based on systems that are primarily moderated with polyethylene and Lucite, and to demonstrate the reactivity changes that can result from use of different 1 H TSLs in these plastic-moderated systems. The first objective was mainly to test data and code for SCALE and AMPX, whereas the second objective was to provide useful data for practitioners on the potential variability of predicted $k_{eff}$ based on TSL changes. The use of an exactly correct TSL is often not possible given the materials involved (e.g., lubricants), but this study was intended to provide some indication of the magnitude of the changes among similar materials that can manifest through application of different TSLs in hydrogenous systems over a range of different neutron energy spectra. Unfortunately, the nominal $k_{eff}$ results exposed deviations between SCALE and Monte Carlo N-Particle (MCNP). Some of the results using different TSLs were also unexpected and difficult to explain. An investigation revealed a processing issue in AMPX that was caused by an ambiguous description of the data for incoherent elastic scattering in the ENDF manual. This issue is discussed in detail in a SCALE User Notification, and it affects some solid moderators, but it does not apply to 1 H bound in water. This issue highlights the importance of validating all TSLs used in safety analysis calculations. The remainder of this paper provides a more detailed examination of the results that triggered the investigation and a summary of the findings of that investigation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Scale and Regionality of Nonelectric Markets for U.S. Nuclear Light Water Reactors

This study assesses existing and potential industries that could conceivably be directly coupled to existing nuclear reactors. The goal is to identify the scale, location, and accessibility of the candidate industrial-product markets, as well as process feedstocks that are available near the plants to establish new industries. For example, CO 2 as a feedstock can be combined with H 2 to produce formic acid (FA), transportation fuels, and lubricants. These new plants can be entirely supported with the heat and electricity provided by a nearby NPP. The potential demand for nonelectric industrial products was assessed by documenting current and possible growth of nonelectricity product markets considered. This assessment used DOE- and industry-supported tools, data, and projections to capture regional industrial market opportunities. Electricity-capacity markets that reward large and reliable generators, such as NPPs, were considered because the electricity market will likely continue to be an important revenue source to NPPs. The key is to balance the needs of energy customers so as to optimize revenue for the affiliated energy customers or partners. In most cases, flexible plant energy delivery and power generation for the grid will require either energy storage or a stock of intermediate products to sustain the industrial customers when the NPP dispatches electricity to the grid. A diverse mix of temperate regions with operating NPPs around the U.S.—representing a variety of operating markets, local generation mix, and seasonal climates—were chosen for this market study. Both current and future market opportunities for candidate industrial-product markets surrounding these NPPs were studied. Figure 2 illustrates the regions chosen for this study. The success of developing nonelectric industrial-product markets as alternative revenue-generating sources for LWRs depends, not only on demand from growing existing markets, such as petroleum refining and NH 3 production, but also on the development of new markets such as light-duty (LD) and heavy-duty (HD) hydrogen FCEVs, synfuels, chemical production, biofuels, metal refining, injection of hydrogen into NG pipelines for gas power-generating units, FA, polymers, and close-coupled industrial heat applications, all of which can significantly increase demand relative to current levels while decarbonizing energy sectors. This study also presents a sample analysis of the economics of hydrogen production in an area of Minnesota, considering the capital and operating costs of a hydrogen plant as well as the local market demand for hydrogen. It includes some assumptions on electricity-grid pricing, showing how hydrogen could be integrated with an NPP and be competitive with the incumbent hydrogen-production process, steam methane reforming (SMR). The objectives of this study include: Provide U.S. NPP operators a robust sampling of the market demand location, scale, and accessibility (including storage and transportation) of the wide variety of industrial-product choices that can be produced using nuclear thermal energy and electricity proximate to a subset of U.S. NPPs to inform the industry of the potential opportunity; show examples and trade-off analyses of how U.S. LWR operators can access these markets, including storage and transportation of industrial products to their intended markets; and present a general analysis example for one industrial product (hydrogen) in one region (Minnesota area), including production, storage, and transportation, to show how nuclear-hybrid integrated energy systems (IESs) could access local markets and improve the profitability of an NPP.

03 NATURAL GAS↗