Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layered electron gas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electronic reconstruction at the polar (111)-oriented oxide interface

Atomically flat (111) interfaces between insulating perovskite oxides provide a landscape for new electronic phenomena. For example, the graphene-like coordination between interfacial metallic ion layer pairs can lead to topologically protected states [Xiao et al., Nat. Commun. 2, 596 (2011) and A. Rüegg and G. A. Fiete, Phys. Rev. B 84, 201103 (2011)]. The metallic ion/metal oxide bilayers that comprise the unit cell of the perovskite (111) heterostructures require the interface to be polar, generating an intrinsic polar discontinuity [Chakhalian et al., Nat. Mater. 11, 92 (2012)]. Here, we investigate epitaxial heterostructures of (111)-oriented LaAlO 3 /SrTiO 3 (LAO/STO). We find that during heterostructure growth, the LAO overlayer eliminates the structural reconstruction of the STO (111) surface with an electronic reconstruction, which determines the properties of the resulting two-dimensional conducting gas. This is confirmed by transport measurements, direct determination of the structure and atomic charge from coherent Bragg rod analysis, and theoretical calculations of electronic and structural characteristics. Interfacial behaviors of the kind discussed here may lead to new growth control parameters useful for electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effects of delta ray electrons on measurement uncertainties of harp system

A harp system, which is a multi-wire beam profile monitoring (MWPM) system, is planned upstream of the spallation target to make in situ calibration of beam current density configuration on the target along with beam imaging from luminescent coating on the beam entrance window at the Second Target Station (STS) of the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). This beam interception-based beam diagnostics system on the target will be used to ensure that the maximum beam loads on the target are within the design range during neutron production. Current design of the harp consists of three layers of measurement wires each of which is sandwiched between voltage biasing wire planes. The signal obtained from each measurement wire layer is disturbed by secondary electrons (SE) and delta rays produced by beam-matter interactions in neighboring wires and ionization of residual gases in accelerator vacuum. While the backgrounds from SE can be suppressed by voltage biasing, the delta-ray electrons with kinetic energies above keV ranges overcome the electric potential bias. In this paper, we study the effects of delta-rays on the measurement uncertainties of MWPM using the particle transport simulation code FLUKA. Furthermore, the cases where the harp system is installed in the proximity of a large delta ray sources such as proton beam window or in the core vessel filled with sub-atmospheric gas have been studied.

Lee, Yong Joong↗
DOE OSTI2025

Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions

Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Extreme Ultraviolet and Beyond Extreme Ultraviolet Lithography Using Amorphous Zeolitic Imidazolate Resists Deposited by Atomic/Molecular Layer Deposition

Amorphous zinc-imidazolate (aZnMIm) resists show potential to meet the demands for next-generation high-numerical aperture (high-NA) metal-containing extreme ultraviolet (EUV) resist materials, given their ease of deposition by atomic/molecular layer deposition (ALD/MLD) at thicknesses of 20 nm and below. Here, this study demonstrates that aZnMIm thin films, previously identified as high-resolution electron beam resists, can also function as negative-tone EUV photoresists. Water development achieves high sensitivity (5 mJ/cm 2 ) but leaves significant residue, while acetic acid development results in poor contrast. A hybrid approach─water followed by acetic acid─enables residue-free development with a sensitivity of 181 mJ/cm 2 . Dry development using 1,1,1,5,5,5-hexafluoroacetylacetone (hfacH) is also possible but shows lower sensitivity (375 mJ/cm 2 ) compared to wet development methods. EUV photoelectron spectroscopy (PES), reflectometry/EUV absorption, total electron yield (TEY), residual gas analysis (RGA), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were used to investigate the effects of EUV irradiation on aZnMIm resists. Reflectometry experiments reveal an aZnMIm EUV absorption coefficient of 6.2 μm –1 , while PES and TEY analyses show that, compared to poly(4-hydroxystyrene) (PHS), a polymer-based reference resist, aZnMIm emits more primary and secondary electrons but generates fewer slow electrons relative to its primary electron emission; its total electron yield is similar to that of poly(methyl methacrylate) (PMMA) resists. When exposed to EUV, aZnMIm predominantly outgasses H 2 , as determined by RGA. TOF-SIMS measurements demonstrate that high-dose EUV exposure only partially fragments the 2-methylimidazole (2MIm) organic linkers, unlike high-dose electron beam exposure, which is known to completely degrade them. Additionally, aZnMIm resists show promise for potential beyond EUV lithography (BEUVL) due to the presence of Zn, which provides higher sensitivity at a wavelength of 6.7 nm compared to other metal ions, such as Sn, that are currently used in the best-performing EUV metal–organic resists. TEY measurements demonstrate that aZnMIm emits nearly twice as many electrons as PHS at 6.7 nm. The BEUV TEY of aZnMIm also surpasses that of PMMA, poly(pentafluorostyrene), and poly(4-iodostyrene), with the latter two being known for their high EUV TEYs. This work provides insight into zeolitic imidazolate framework (ZIF)-based EUV and BEUV resists and highlights their potential for both wet and dry development.

lithography↗
DOE OSTI2024

Investigation of Interlayer Dielectric in BaTiO 3 /III–Nitride Transistors

In this paper, the impact of varying the thickness of the Al 2 O 3 interlayer dielectric on the electrical characteristics of BaTiO 3 /III-nitride transistors is investigated. In the findings, it is revealed that a minimum thickness of 8 nm for the Al 2 O 3 layer is crucial to maintain high device performance and protect against sputtering-induced damage during BaTiO 3 deposition. The fabricated BaTiO 3 /Al 2 O 3 /AlGaN/GaN high electron mobility transistors exhibit exceptional electrical properties, including a maximum current density of 700 mA mm –1 , an on-resistance of 5 Ω mm, an I ON /I OFF ratio of 10 7 , a subthreshold slope of 119 mV dec –1 , and significantly reduced gate leakage current. The devices with the optimal 8 nm Al 2 O 3 thickness demonstrates excellent agreement between theoretical and experimental values for effective mobility, achieving a value of 1188 cm 2 V –1 ·s at a 2D electron gas density of 10 13 cm –2 . Furthermore, in the study, it is confirmed that increasing the Al 2 O 3 thickness also improves the quality of interface charge density, as evidenced by the results obtained from capacitance–voltage measurements. In these findings, the critical role of controlling the Al 2 O 3 thickness in optimizing the electrical characteristics and overall performance of BaTiO 3 /III-nitride transistors are highlighted.

42 ENGINEERING↗
DOE OSTI2026

Role of Surface Termination in the Structural and Electronic Properties of Sc$_2$CT$_\textrm{x}$ MXene

Graphene-like layered transition metal carbides, nitrides, or carbonitrides, called MXenes, obey the stoichiometric formula of M n+1 X n T x , where M is an early transition metal such as scandium (Sc), n is a natural number, X is C, N, or CN, and T x is a functional group such as –O, –F, or –OH that passivates the surface of the MXene. The electronic structure of bare Sc 2 C and functionalized Sc 2 CT x MXenes are explored by performing first-principles density functional theory (DFT) calculations. The bare Sc 2 C is metallic, but less stable than its passivated structure. The Sc 2 C MXene has an interlayer 2D electron gas not bound to Sc or C atoms but free to move, making it an electride. DFT calculations show that functionalization can open an energy gap in Sc 2 CT x MXenes. The size and type (direct versus indirect) of the bandgap vary with the functional groups, which provides a means for opening and tuning of the band gap.

DFT↗
DOE OSTI2023

Electrolyte Reactivity on the MgV 2 O 4 Cathode Surface

Predictive understanding of the solvation-dependent reactivity and molecular interaction of electrolyte ions and solvent molecules on reactive electrodes has been a major challenge but is essential for addressing instabilities and surface passivation that occur at electrode-electrolyte interface (EEI) of multivalent Mg batteries. In this work, the isolated intrinsic reactivities of prominent chemical species present in magnesium bis(trifluoromethanesulfonimide) (Mg(TFSI) 2 ) in diglyme (G2) electrolytes, including ionic (TFSI - , [Mg(TFSI)] + , [Mg(TFSI):G2] + , [Mg(TFSI):2G2] + ) as well as neutral molecules (G2) on magnesium vanadate cathode (MgV 2 O 4 ) surface has been studied using a combination of first-principles calculations and multimodal analysis of well-defined cathode electrolyte interphase (CEI) layers. Here, our calculations show that non-solvated [Mg(TFSI)] + is the strongest adsorbing species on the MgV 2 O 4 surface compared to all other ions while fully solvated [Mg(TFSI):2G2] + are least favorable to decomposition. The cleavage of C-S bonds in TFSI - to form CF 3 - is predicted to be most desired pathway for all ionic species, which is followed by the cleavage of C-O bonds of G2 to yield CH 3 + or OCH 3 - species. The strong stabilization and electron transfer between ionic electrolyte species and MgV 2 O 4 is found to significantly favor these decomposition reactions on the surface compared to intrinsic gas phase dissociation. Experimentally, we used state-of-the-art ion soft landing to selectively deposit mass-selected TFSI - , [Mg(TFSI):G2] + and [Mg(TFSI):2G2] + on MgV 2 O 4 thin film to form well-defined electrolyte-MgV 2 O 4 interface. Analysis of soft-landed interphase using X-ray photoelectron, X-ray absorption near edge structure, electron energy-loss spectroscopies as well as transmission electron microscopy confirmed the presence of decomposition species (e.g., MgFx, carbonates) formed in the interfacial region and the higher amount of MgFx with [Mg(TFSI):G2] + , which corroborates the theoretical observation. Overall, we established the mechanistic pathway for the electrolyte-induced formation of passivating fluorides on MgV 2 O 4 cathode facilitated by the surface adsorption and charge transfer, which provided essential knowledge for rational design of stable electrolytes for multivalent cathodes.

Cathode-electrolyte interphase formation↗
DOE OSTI2024

Interfacial charge transfer and its impact on transport properties of LaNiO 3 /LaFeO 3 superlattices

Charge transfer or redistribution at oxide heterointerfaces is a critical phenomenon, often leading to remarkable properties such as two-dimensional electron gas and interfacial ferromagnetism. Despite studies on LaNiO 3 /LaFeO 3 superlattices and heterostructures, the direction and magnitude of the charge transfer remain debated, with some suggesting no charge transfer due to the high stability of Fe 3+ (3d 5 ). Here, we synthesized a series of epitaxial LaNiO 3 /LaFeO 3 superlattices and demonstrated partial (up to ~0.5 e - /interface unit cell) charge transfer from Fe to Ni near the interface, supported by density functional theory simulations and spectroscopic evidence of changes in Ni and Fe oxidation states. The electron transfer from LaFeO 3 to LaNiO 3 and the subsequent rearrangement of the Fe 3d band create an unexpected metallic ground state within the LaFeO 3 layer, strongly influencing the in-plane transport properties across the superlattice. Moreover, we establish a direct correlation between interfacial charge transfer and in-plane electrical transport properties, providing insights for designing functional oxide heterostructures with emerging properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dry Printing Pure Copper with High Conductivity and Adhesion for Flexible Electronics

Additive manufacturing of functional devices on various rigid and flexible substrates is rising rapidly due to their design flexibility, rapid manufacturing, and lower cost. Current printing technologies are ink-based and focused on printing silver (Ag) as conductive lines due to its matured ink formulation process, low sintering temperature, ease of printing, and low oxidation rate. However, Ag is the 68th most abundant element on Earth, while copper (Cu) is the 25th, making it much cheaper (>100×) while having a comparable conductivity to Ag. Therefore, printing Cu has become technologically and economically more attractive than Ag. Nevertheless, Cu printing is still a significant challenge in ink-based printing methods due to the higher sintering temperature relative to the glass-transition temperature of most flexible substrates, the higher oxidation rate, the challenging ink formulation process, and ink stability concerns. Here, we demonstrate printing highly conductive Cu on flexible polyimide substrates using a dry printing technique. Cu nanoparticles (~3–30 nm) are generated by on-demand laser ablation of a solid Cu target inside the printer head and under argon background gas. These Cu nanoparticles are then transported through a nozzle and onto the substrate, where they are laser-sintered in real time. The argon gas plays three critical roles in laser plume condensation for nanoparticle generation, transport, and sheath gas to avoid oxidation during sintering. The sintered nanoparticles thus show high electrical conductivity and mechanical stability under static and cyclic tests. Our dry printing technique can potentially revolutionize how electronic devices and sensors are additively manufactured for earth and space applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Real-time Atomic-scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Dynamic structural and chemical information of catalyst surface during a catalytic reaction is critical for deciphering the mechanisms governing the properties of catalysts. Transition-metal based catalysts have emerged as an important alternative to noble metal catalysts, but their catalytic mechanism remains largely elusive, complicated by dynamic structure and valence evolution. Herein, by using in situ aberration-corrected environmental transmission electron microscopy, we capture, for the first time at atomic level, the dynamic evolution of Cu surface during CO oxidation reaction. We discovered that, under reaction condition, the Cu surface is activated, typically involving 2-3 atomic layers with the formation of a reversible meta-stable phase that only exists during catalytic reactions. Further, we reveal the distinctive role of CO and O2 in the surface activation, featuring CO exposure to lead to surface roughening and consequently formation of low-coordinated Cu atoms, while O2 exposure to induce quasi-crystalline CuOx phase. Corrugated by DFT calculations, we rationalize crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.

Luo, Langli↗
DOE OSTI2026

Synthesis and application of thermally responsive nanofiber coatings for overtemperature monitoring

This study presents a one-pot synthesis route to organometallic nanofibers based on copper thiolate, exhibiting distinctive chemical and physical characteristics. Electron microscopy analysis of morphology and composition revealed 2-10 μm-long, 50-90 nm-diameter hollow and non-hollow fibers composed of copper, sulfur, oxygen, hydrocarbon, and chlorine. Thermogravimetric analysis showed a pronounced mass loss within 120°C-135°C. To elucidate the thermal responsive pathways, the nanofibers were characterized before and after heating. X-ray photoelectron spectroscopy indicates that an initially mixed Cu(I)/Cu(II) oxidation states transition to predominantly Cu(I) upon heating. A layer of nanofiber was coated on battery pouch foil and evaluated as a candidate thermally sensitive coating. At elevated temperature (100-130°C), nanofiber coating released volatile organic compounds, sulfide and sulfur dioxide as detected using multiple gas sensors. This thermally responsive gas release/sensing approach provides a potential large-area temperature monitoring strategy, which is particularly relevant where direct temperature measurements of individual batteries is impractical. The results established proof of concept for nanofiber-coated battery pouch foil as overtemperature warning platform that can provide alerts when surface temperatures exceed a critical threshold. More broadly, the ability to form interconnected fiber networks positions copper thiolate nanofiber coatings as promising materials for advanced applications.

Ihala Gamaralalage, Chanaka [ORNL] (ORCID:00000002↗
DOE OSTI2024

Stable Pentagonal Layered Palladium Diselenide Enables Rapid Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H 2 O 2 ) via the two-electron oxygen reduction reaction (2e – ORR) is promising for various practical applications, such as wastewater treatment. However, few electrocatalysts are active and selective for 2e – ORR yet are also resistant to catalyst leaching under realistic operating conditions. Here, a joint experimental and computational study reveals active and stable 2e – ORR catalysis in neutral media over layered PdSe 2 with a unique pentagonal puckered ring structure type. Computations predict active and selective 2e – ORR on the basal plane and edge of PdSe 2 , but with distinct kinetic behaviors. Further, electrochemical measurements of hydrothermally synthesized PdSe 2 nanoplates show a higher 2e – ORR activity than other Pd–Se compounds (Pd 4 Se and Pd 17 Se 15 ). PdSe 2 on a gas diffusion electrode can rapidly accumulate H 2 O 2 in buffered neutral solution under a high current density. The electrochemical stability of PdSe 2 is further confirmed by long device operational stability, elemental analysis of the catalyst and electrolyte, and synchrotron X-ray absorption spectroscopy. This work establishes a new efficient and stable 2e – ORR catalyst at practical current densities and opens catalyst designs utilizing the unique layered pentagonal structure motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Corrosion of Zinc Cold Spray Coatings in a Wet Sweet and Sour Gas Environment

Internal corrosion is a problem for steel pipelines transporting natural gas or CO 2 containing water and partial pressures of H 2 S higher than 0.3 kPa (0.05 psi). This work aims to mitigate internal corrosion in steel pipelines transporting natural gas containing H 2 S using cold spray coatings. Two types of the cold spray binary metallic coatings (zinc chromium [ZnCr]. zinc niobium [ZnNb]) were studied using electrochemical techniques: potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy. The corrosion resistance of cold spray coatings (ZnCr, ZnNb) was evaluated in an environment containing 4 bar CO 2 pressure, simulating the partial pressures found in gas transmission lines over a solution of 3.5 wt% NaCl heated to 40°C. A concentration of 0.003 M Na 2 S 2 O 3 ·5H 2 O, corresponding to H 2 S partial pressures around 0.079 bar (1.146 psi), was used to simulate sour conditions. Postcorrosion surface characterization was performed using a scanning electron microscope (SEM) equipped with an energy-dispersive x-ray spectroscope (EDS) and x-ray diffraction analysis. The data showed that the presence of 0.003 M Na 2 S 2 O 3 ·5H 2 O shifted the corrosion potential to more anodic values and decreased the corrosion current density. Both coatings showed similar behavior after 1 h of exposure in the CO 2 /H 2 S environment, indicating that similar electrochemical reactions were occurring on ZnNb and ZnCr. SEM images and EDS surface analyses for specimens showed a significant change in the surface chemical composition of carbon steel coated with ZnNb and ZnCr after 24 h of immersion. In the presence of thiosulfate (under sour conditions), the formation of corrosion product layers (ZnCO 3 and ZnS) on top of ZnNb and ZnCr coatings increased their corrosion resistance, which helped to reduce their corrosion by a factor of 2. Under a sweet environment, the corrosion rates for steel coated with cold spray coatings after 14 d of exposure are lower than that for galvanized steel by a factor of 5 due to the ZnCO 3 layer formed on top of the coatings. The ZnCO 3 layer formed on the steel surface acts as a physical barrier against corrosion by blocking the diffusion of corrosive species to the surface. No localized attack was observed. ZnCr Cold spray coating with defect showed promising corrosion protection against CO 2 corrosion (sweet corrosion) after 14 d of exposure to a CO 2 environment. Here, the scratch on the coating simulated damage created in service, and it was deep enough to expose the substrate material (steel). The formation of zinc oxide (ZnO) and zinc carbonate (ZnCO 3 ) on the scratch confirmed the cathodic protection of the steel by ZnCr and ZnNb coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Towards self-consistent integrated modeling of the tokamak pedestal, scrape-off layer, and divertor using SOLPS-ITER and EPED

A predictive, self-consistent integrated model of the tokamak edge plasma and neutral system has been developed and validated against experimental data from DIII-D, spanning from the divertor target and scrape-off layer to the top of the pedestal. The model uses the SOLPS-ITER fluid boundary plasma and neutral code to constrain the EPED prediction of the pedestal height and width by taking the separatrix temperature and density calculated from SOLPS as inputs to EPED. An empirical proxy function based on data from a subset of these discharges is then used to infer the ratio of density at the pedestal top to that at the separatrix based on the electron temperature at the divertor target. This allows the density at the top of the pedestal to be provided to EPED as well, so that knowledge of this quantity is no longer required a priori, while SOLPS radial transport coefficients are needed instead. The gas puff rate provided to SOLPS is then a primary model input for this forward model coupling (along with radial transport coefficients, which are kept fixed through each scan in this study). Comparisons with measurements from DIII-D density scans through a range of target conditions find significant pedestal pressure degradation as the density is increased towards detachment in three different divertor configurations, consistent with the experimental data in these ballooning-limited pedestal regimes.

core-edge integration↗
DOE OSTI2020

Axial magnetic flux amplification in Hall-magnetohydrodynamic simulations of externally magnetized z-pinches

It is shown that externally magnetized gas-puff z-pinches under compression can exhibit robust axial flux amplification under suitable axial boundary conditions. This effect relies upon the Hall term in the generalized Ohm's law to generate azimuthal currents in the presence of a driving axial electric field. Under dynamic compression, the total current tends to flow in a mostly force-free boundary layer, separating the predominately azimuthal field outside the layer and the predominately axial field inside the layer. The effect only appears to occur if the axial boundaries allow for outflow or absorption of electromagnetic energy. The effect is mitigated by imposing either periodic or conducting axial boundary conditions. A semi-analytic equilibrium analysis agrees with steady-state solutions of the time-dependent electron-magnetohydrodynamic equations and provides an estimate of the scaling of the boundary layer as well as suggesting a scenario for the formation of the boundary layer. When operative, the effect can significantly impede plasma compression due to the increase in axial flux that diffuses into the pre-compressed plasma or through the presence of conductors that inhibit movement of the generated axial flux. Several facilities have noted unusual implosion behavior in z-pinch experiments with applied axial fields that does not appear to be explainable within the standard magnetohydrodynamic model. In conclusion, it is suggested that these experiments can be explained by the axial flux amplification and concentration effect

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Divertor-safe nonlinear burn control based on a SOLPS parameterized core-edge model for ITER

Abstract For ITER operations, the range of desirable burning-plasma regimes with high fusion power output will be restricted by various operational constraints. These constraints include the saturation of ITER’s various heating and fueling actuators such as the neutral beam injectors, the ion and electron cyclotron heating systems, the gas puffing system, and the deuterium–tritium pellet injectors. In addition to these actuator constraints, the H-mode power threshold, divertor detachment, and the heat load on the divertor targets may apply limitations to ITER’s operational space. In this work, Plasma Operation Contour (POPCON) plots that map the aforementioned constraints to the temperature-density space are used to investigate which constraints are most limiting towards accessing regimes with high fusion power output. The presented POPCON plots are based on a control-oriented core-edge model that couples the nonlinear density and energy response models for the core-plasma region with SOLPS4.3 parameterizations for conditions in the edge-plasma regions (scrape-off-layer and divertor). Using this control-oriented core-edge model, a nonlinear burn controller, which aims to regulate the plasma temperature and density in the core-plasma region, is constructed in this work. This controller is augmented with an online optimization scheme that governs the control references such that the plasma can be guided towards regimes with high fusion powers while protecting the divertor targets from dangerously high heat loads. A closed-loop simulation study illustrates the capability of this burn control scheme.

Physics↗
DOE OSTI2024

Characterization of SOL profiles and turbulence in ICRF-heated plasmas in EAST

Scrape-off layer (SOL) profiles and turbulence in ion cyclotron range of frequency (ICRF)-heated plasmas are investigated by the reciprocating probe diagnostic system (FRPs) and gas puff imaging (GPI) diagnostic in EAST. A radio-frequency (RF) sheath potential reaching up to 100 V is identified proximate to the ICRF antennas. Notably, the amplitude of this RF sheath potential escalates in response to rising ICRF power and inversely with plasma density. When a RF sheath is present in the far SOL, a pronounced density ‘shoulder’ forms in front of the ICRF antennas, while the ‘shoulder’ fade away as the antenna and associated RF sheath shift outwards. A strong E r shear is revealed by measurements from both FRPs and GPI. Analysis of the poloidal wave number-frequency spectrum reveals suppression of high-frequency turbulence in the far SOL due to the RF sheath. This effect is manifested in the reduced autocorrelation time τ c and reduced average blob size δ blob of the SOL plasma. Intriguingly, the poloidal propagation direction of the low-frequency turbulence reverses from the electron to the ion diamagnetic drift direction at the RF sheath location. A surge of tungsten impurity is potentially attributed to the heightened interaction between the SOL plasmas and the wall material. Shifting the ICRF antennas outward, to alleviate heat spots, results in the relocation of the RF sheath to the shaded region of the main limiter. This shift amplifies the radial velocity of blobs in the far SOL and concurrently diminishes the SOL density when compared to conditions without ICRF injection. The properties of ion saturation current fluctuations are consistent with the stochastic model predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Glassy quantum nuclear pasta in neutron star crusts

We conduct a comprehensive survey of the shape parameter space of the nuclear pasta phases in neutron star crusts by conducting three-dimensional Hartree-Fock + BCS calculations. Spaghetti, waffles, lasagna, bicontinuous phases and cylindrical holes occupy local minima in the resulting constant-pressure Gibbs energy surfaces, implying multiple geometries coexist at a given depth. Notably, the bicontinuous phase, in which both the neutron gas and nuclear matter extend continuously in all dimensions appears over a large depth range. Our results support the idea that nuclear pasta is a glassy system. At a characteristic temperature, of order 10 8 – 10 9 K, different phases may become frozen into domains whose sizes we estimate to be 1–50 times the lattice spacing and over which the local density and electron fraction can vary. Above this temperature, very little long-range order exists and matter is an amorphous solid. Electron scattering off domain boundaries may contribute to the disorder resistivity of the pasta phases. Annealing of the domains may occur during cooling; repopulating of local minima during crustal heating might lead to temperature-dependent transport properties in the deep crust layers. We identify four regions distinguished by whether pasta is the true ground state, and whether the pasta structure allows delocalization of protons. The whole pasta region can occupy up to 70% of the crust by mass and 25% by thickness, and the layer in which protons are delocalized could occupy 45% of the crust mass and 15% of its thickness.

79 ASTRONOMY AND ASTROPHYSICS↗