Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The determination of minority carrier lifetimes in direct band-gap semiconductors by monitoring intensity-modulated luminescence radiation

When an extrinsic, direct band-gap semiconductor sample is irradiated by photons of an energy higher than the energy of the band gap between valence and conduction bands, excess electron-hole pairs are generated which, while diffusing through the sample, produce luminescence via radiative recombination. If, furthermore, the intensity of the impinging beam of photons is modulated sinusoidally, the luminescence radiation escaping from the sample will be phase shifted with respect to the original photon beam in a characteristic way. It will be shown that by measuring the phase shift at different modulation frequencies, the Shockley-Read-Hall lifetime of minority carriers may be ascertained. The method is nondestructive inasmuch as there is no need to fabricate p-n junctions or Ohmic contacts, nor is it necessary to remove already existing Ohmic contacts of angle lap the surface, etc., procedures often needed when determining lifetimes with the scanning electron microscope (in which case a p-n junction must be present).

Von Roos, O.↗

Cosmological constraints on the lifetime of massive particles

Particles with masses more than a few MeV, decaying into photons or electrons, can cause destruction by photofission of cosmologically produced light elements. A previous calculation of this effect is corrected and extended, and used to derive maximum lifetimes for massive neutrinos; these range from a few thousand seconds upward, depending on the particle mass. Some approximate expressions are given that enable lifetime limits to be obtained for other particles, with different masses and abundances, such as gravitinos. These limits are generally stronger than previously determined constraints, such as distortion of the microwave background by energetic photons.

Lindley, D.↗

Lifetimes and Reliabilities of Bevel-Gear Drive Trains

Statistical methods used to predict system lifetimes from component lifetimes. Report shows how to use information to determine system life of drive train, using methods of probability and statistics. Presents life and reliability model for bevel-gear drive trains. Bevel-gear and support-bearing lives analyzed for each gear and bearing in drive train, with results statistically combined to produce system life for entire drive train. Numerical example included.

Lewicki, D.↗

Orbital-Lifetime Program

Orbital Lifetime Program (OL) analyzes long-term motion of Earthorbiting spacecraft at altitudes of up to 2,500 km. Models perturbations to orbit caused by solar-radiation pressure, atmospheric drag, and gravitational effects of Sun, Moon, and oblate Earth. Used to predict orbital lifetime and decay rate of satellites. OL written in FORTRAN 77.

Orr, L. H.↗

Rapid thermal processing of Czochralski silicon substrates: Defects, denuded zones, and minority carrier lifetime

Rapid thermal processing (RTP) of Czochralski (Cz) silicon substrates is discussed with its attendant effects on defects, denuded zones, and minority carrier lifetime. Preferential chemical etching and X-ray topography was used to delineate defects which were subsequently correlated with minority carrier lifetime; determined by a pulse metallo-organic decompositon (MOD) test device. The X-ray delineation of grown-in defects was enhanced by a lithium decoration procedure. Results, thus far, show excellent correlation between process-induced defects.

Rozgonyi, G. S.↗

Method and apparatus for measuring minority carrier lifetime in a direct band-gap semiconductor

A direct band-gap semiconductor is exposed to intensity-modulated photon radiation having a characteristic energy at least as great as the energy gap of the semiconductor. This produces a time dependent concentration of excess charge carriers through the material, producing a luminescence signal modulated at the same frequency as the incident radiation but shifted in phase by an amount related to the lifetime of minority carriers. In a preferred embodiment, the phase shift of the luminescence signal is determined by transforming it to a modulated electrical signal and mixing the electrical signal with a reference signal modulated at the same frequency and having a phase which is known relative to the incident radiation. Minority carrier lifetime is calculated by integrating a direct current component of the mixed signal (F sub dc) over a 2 pi range in phase of the reference signal.

Vonroos, Oldwig↗

Radiative lifetimes of B and C 1Sigma(+) states of CO

A delayed-coincidence technique has been used to measure lifetimes of B and C 1Sigma(+) states of CO. Previous data on these states considerably disagree with each other. It is found that the lifetime of the B 1Sigma(+) state is 25.9 + or - 2 ns and that of the C 1Sigma(+) state is 2.2 + or - 0.5 ns.

Krishnakumar, E.↗

Theoretical determination of the radiative lifetime of the A 2Sigma(+) state of OH

The present theoretical potentials and transition moment-based computation of the radiative lifetime of the A 2Sigma(+)(v-prime = 0, N-prime = 1) state of OH yields a value of 673 ns, in excellent agreement with two of the experimental values obtained through laser excitation fluorescence. The theoretical radiative lifetimes, which are expected to be lower bounds and accurate to 2 percent, are accurate enough to preclude both the slightly lower value determined by Hanle effect studies and the higher values obtained by the high frequency deflection technique.

Bauschlicher, Charles W., Jr.↗

Variations in the electrical short-circuit current decay for recombination lifetime and velocity measurements

An improved measurement system for electrical short-circuit current decay is presented that extends applicability of the method to silicon solar cells having an effective lifetime as low as 1 microsec. The system uses metal/oxide/semiconductor transistors as voltage-controlled switches. Advances in theory developed here increase precision and sensitivity in the determination of the minority-carrier recombination lifetime and recombination velocity. A variation of the method, which exploits measurements made on related back-surface field and back-ohmic contact devices, further improves precision and sensitivity. The improvements are illustrated by application to 15 different silicon solar cells.

Jung, Tae-Won↗

A theoretical study of the lifetime and transport of large ionospheric density structures

A three-dimensional time-dependent ionospheric model was used to study the spatial and temporal evolution and transport of large-scale high-density ionospheric structures for a range of solar cycle, seasonal, and IMF conditions. Both density depletions and enhancements were considered. It was found that, depending on the IMF, horizontal plasma convection can cause an initial structure to break up into multiple structures of various sizes, to become stretched into elongated segments, or to remain as a single distorted structure. The lifetime of an F-region density structure depends on several factors, including its magnitude, the initial location where it was formed, the season, the solar cycle, and the convection pattern. For example, in summer, the effects of a large density structure can disappear in a few hours or last as long as nine hours, while in winter the effects can persist for 24 hours. The passage of perturbed plasma flux tubes through sunlit and auroral regions can significantly increase the lifetime of plasma enhancements.

Schunk, R. W.↗

Global three-dimensional model calculations of the budgets and present-day atmospheric lifetimes of CF2ClCFCl2 (CFC-113) and CHClF2 (CFC-22)

The annual percentage increases in concentrations of the chlorofluorocarbons CFC-113 (an industrial solvent) and CFC-22 (a refrigerant) are the highest among major chlorofluorocarbons in the atmosphere today. The present-day atmospheric lifetimes for these species are computed using a global three-dimensional dynamical-chemical model. The present-day lifetimes of both are long (15.5 years for CFC-22 and 136 or 195 years for CFC-113, depending on assumed O2 absorption cross sections), underscoring the need to decrease their emissions in order to minimize their future role in ozone destruction and greenhouse warming.

Golombek, Amram↗

Thermal performance of a five year lifetime superfluid helium dewar for SIRTF

The Space Infrared Telescope Facility (SIRTF) is a 1 m class cryogenically cooled observatory for infrared astronomy. The SIRTF cryogenic system has to satisfy the five year mission lifetime requirement as well as to provide sufficient cooling for the science instruments and optical system. A 4000 cu dm superfluid helium dewar has been selected for the current baseline cryogenic system which represents the largest superfluid helium dewar proposed to date for a long lifetime space-borne application. This paper discusses the design and predicted performance of the current cryogenic system, as well as its comparison with IRAS and other space-borne superfluid helium dewars currently under development.

Lee, J. H.↗

Long-term orbital lifetime predictions

Long-term orbital lifetime predictions are analyzed. Predictions were made for three satellites: the Solar Max Mission (SMM), the Long Duration Exposure Facility (LDEF), and the Pegasus Boiler Plate (BP). A technique is discussed for determining an appropriate ballistic coefficient to use in the lifetime prediction. The orbital decay rate should be monitored regularly. Ballistic coefficient updates should be done whenever there is a significant change in the actual decay rate or in the solar activity prediction.

Dreher, P. E.↗

Predicting Lifetimes Of CMOS ASIC's From Test Data

Concise report discusses recent developments in use of semiempirical mathematical models to predict rates of failure and operating lifetimes of complementary metal oxide/semiconductor (CMOS) application-specific integrated circuits (ASIC's). Each model represents specific mechanism of failure. Once failure mechanisms and models relevant to given ASIC chosen, adjustable parameters in models fitted to life-test data acquired from representative integrated-circuit structures on test coupons fabricated along with ASIC's. Then design parameters of ASIC's incorporated into models, and models yield lifetimes.

Buehler, Martin G.↗

Positron lifetime spectroscopy for investigation of thin polymer coatings

In the aerospace industry, applications for polymer coatings are increasing. They are now used for thermal control on aerospace structures and for protective insulating layers on optical and microelectronic components. However, the effectiveness of polymer coatings depends strongly on their microstructure and adhesion to the substrates. Currently, no technique exists to adequately monitor the quality of these coatings. We have adapted positron lifetime spectroscopy to investigate the quality of thin coatings. Results of measurements on thin (25-micron) polyurethane coatings on aluminum and steel substrates have been compared with measurements on thicker (0.2-cm) self-standing polyurethane discs. In all cases, we find positron lifetime groups centered around 560 psec, which corresponds to the presence of 0.9-A(exp 3) free-volume cells. However, the number of these free-volume cells in thin coatings is larger than in thick discs. This suggests that some of these cells may be located in the interfacial regions between the coatings and the substrates. These results and their structural implications are discussed in this report.

Singh, Jag J.↗

Radiative lifetimes, branching rations, and absolute transition probabilities in Cr II and Zn II

New absolute atomic transition probability measurements are reported for 12 transitions in Cr II and two transitions in Zn II. These transition probabilities are determined by combining branching ratios measured by classical techniques and radiative lifetimes measured by time-resolved laser-induced fluorescence. The measurements are compared with branching fractions, radiative lifetimes, and transition probabilities in the literature. The 206 nm resonance multiplets in Cr II and Zn II are included in this work. These multiplets are very useful in determining the distribution of the elements in the gas versus grain phases in the interstellar medium.

Bergeson, S. D.↗

Positron lifetime spectroscopy in thin polymer coatings

Polymer coatings are finding increasing applications in aerospace industry. The effectiveness of coatings depends strongly on their microstructure and adhesion to the substrates. Currently, there is no technique for adequately monitoring the quality of the coatings. We adapted positron lifetime spectroscopy for the investigation of thin coatings. Results of measurements on 0.001-in-thick polyurethane coatings on aluminum and steel substrates and thicker (0.080-in.) self-standing polyurethane discs were compared. In all cases, we find positron lifetime groups centered around 560 ps, corresponding to the presence of 0.9 A exp 3 free volume cells. However, the number of free volume cells in thin coatings is larger, suggesting that the morphology of thin coatings is different from that of bulk polyurethane. These results and their structural implications are discussed.

Singh, Jag J.↗

Lifetimes and eigenstates in atmospheric chemistry

The time scales and mode of the atmosphere's response to chemical perturbations are defined by the eigenvalues and eigenvectors of the system. The eigenstates of a simplified one-box CH4-CO-OH system are analyzed. The longest time constant (smallest eigenvalue) always exceeds the lifetime defined by the steady-state loss frequency for CH4, the longest lived gas. Thus, the extent of a CH4 perturbation -- the methane response time -- is always longer than predicted by the steady-state lifetime and is independent of size of the perturbation in the linear limit. This lengthening of the atmospheric recovery time can be diagnosed by how close we are to a chemically unstable troposphere, i.e., how much OH production exceeds that minimum needed to oxidize just the global emissions of CH4, CO, and other hydrocarbons and species.

Prather, Michael J.↗