SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rocky Flats are hemisphere shells of bare HEU. Planet is a vertical lift assembly at the DAF. MUSiC is a set of experiments using the Rocky Flats hemisphere shells and the Planet lift assembly.
Various robotic tooling options have been evaluated for the NRIC DOME concept of operations (ConOps). Framatome was contracted to develop a wide-ranging list of commercial off the shelf (COTS) and custom robotic systems to be considered for performing the DOME ConOps functions. Subsequent project tasks from Framatome narrowed down the list and scored the most viable options. The abbreviated list, and associated scoring, has been reviewed and assessed to provide formal recommendations for the robotic ConOps functions of DOME. The overhead telescoping mast & Kraft arm assembly is recommended as the primary system for reactor demobilization and removal. The estimated cost is $\$700$K with a timeline to develop and deliver of about 2.5 years. The mast & Kraft arm would still require an overhead lift system for mobilization and installation. Either the refurbished polar crane or a new gantry crane delivery platform could both serve as the overhead lift and delivery system. The estimated costs for the refurbishment polar crane and new gantry crane systems are, respectively, $\$4.4$M and $\$3$M with about 2.5 years to develop and deliver. A Brokk + Kraft crawler & arm is recommended as a secondary robotic system to support the overhead mast & Kraft arm system. The Brokk + Kraft crawler & arm would cost an estimated $\$726$k and would take about 1.5 years to develop and deliver. The Boston Dynamics SPOT robot is also recommended for the in-service monitoring during experimentation operations. The estimated cost is $\$220$K with a timeline to deliver of 8-14 months. The Elios 3 aerial drone is recommended to perform large area radiation dose rate mapping and visual inspections. The estimated cost is a $\$100$K and will also need about 8-14 months to develop and deliver. A mockup rig is also recommended to be procured an employed to test & verify the robotic capabilities as well as provide needed training for operations personnel. It is estimated that a mockup rig would cost about $\$500$k and would take up to a year to develop and build.
The Richmond Eyebolt Lift Fixture system is used to move older styles of concrete shield blocks here at LANSCE. Blocks can weigh anywhere from 1.8 to 18 tons. It consists of the eyebolt itself and a steel insert that is cast into the block. Eyebolts come in 2-inch or 1&1/2-inch sizes. The lifting capacity of the 1-1/2-inch is 23,000 lbs and the 2-inch is 30,000 lbs.
Lawrence Livermore National Lab has a need to rotate a device 180 degrees partway through device assembly to install components located on the opposite side of the assembly. This rotation operation must be done in a controlled matter to ensure safe handling of the device, which contains delicate instrumentation and hazardous materials. These devices can take several years and millions of dollars to design, manufacture, and build. The device may weigh up to 200 lbs, which exceeds the laboratory limit of 50 lbs for a one man manual lift or 100 lbs for a two man manual lift. In the past, an overhead crane and come-alongs were used to rotate the device, which was a complex operation that presented more opportunities for mistakes than the desired solution. Complexities of the prior solution include the required proper come-along set-up by skilled workers, several come-along configurations during the rotation of the device, and limited control during the rotation operation. A simpler engineered solution is desired.
The goal of the Co-Optima program was to accelerate deployment of co-optimized fuels and engines that will reduce fuel consumption, and criterion pollutants and greenhouse gas (GHG) emissions for both spark and compression-ignited engines. In this project, combustion measurements from a constant pressure flow rig (CPFR) with optical access were used to assess fundamental combustion behavior of number of different candidate fuels and fuel blends. This chamber and its peripheral systems allowed stable control of ambient air pressure and temperature and fuel injection pressure and timing for hundreds of repeat injections allowing statistical interpretation of the results. The optical diagnostics enabled capturing of liquid length, vapor length, ignition timing, lift-off length as well as localized (temporal and spatially resolved) mixture refractive index, flame structure, and soot mass. The operating conditions allowed the study of combustion conditions promoting lean lifted flame combustion (LLFC), a mixing-controlled low-temperature combustion (LTC) strategy to reduce soot production in Advanced Compression Ignition (ACI) engines.
Electrospinning is an inexpensive method for producing nanofibers, with applications in accelerator targets, air filtration, and biomedicine. This project aims to upgrade and test an existing roll-to-roll electrospinner that is economical for industrial production. Our unit cannot adjust spinneret to collector separation and thus nanofiber diameter (application dependent). The electro-spinneret channel also does not have lateral adjustment capabilities. Lastly, the viscosities of our polymers have not been quantified, which can inform future injector nozzle designs. Modeling was done with Siemens NX CAD, and viscosity was measured using a Brookfield DVE-LV viscometer. A dual scissor lift design was approved, and construction was started, along with channel modifications. Viscosity measurements of polyvinyldimethylformamide were recorded with inconsistent results. Going forward, the scissor lift and channel modifications will be evaluated with our electrospinner. Future viscosity trials must be completed in accordance with testing requirements. The optimization of electrospinner units can make nanofiber production more feasible for many industries.
ARES was in part motivated by the determination of President’s Council of Advisors on Science and Technology (PCAST) on May 13th, 2023 that published a set of inquiries: In an era in which convincing images, audio, and text can be generated with ease on a massive scale, how can we ensure reliable access to verifiable, trustworthy information? How can we be certain that a particular piece of media is genuinely from the claimed source? What technologies, policies, and infrastructure can be developed to detect and counter AI-generated disinformation? In an effort to automatically analyze and patch/optimize code the work in this report describes various neural Machine Learning (ML) analysis engine implementations to assist in situations where source code is deficient or completely lacking to decompile (lift) binary code to ’C’. The goal is to gradually reduce human intervention. To this end, two Large Language Model (LLM) variants (Code LLama 2, LLama 3.1 and Starcoder1, Starcoder 2) where finetuned with ’before/after’ code pairs on the OpenBLAS library. LLama trained on the lowering process, Starcoder trained on the lifting process with National Security Agency’s (NSA) open-source Ghidra decompiler assist. The inferencing test results indicate correctness for only very short sequences for Starcoder 2. Moving forward, the experiments conclude with a set of recommendations of required resources and technologies
The Open-Source Offshore (OSO) airfoils have been developed for research purposes for offshore wind turbines, offering a set of airfoils that align with modern turbine design requirements and industry design practices without proprietary constraints on research use. The eventual airfoil family will target the IEA 22 MW reference wind turbine, which was originally developed with the FFA airfoils. The two airfoils summarized in Table 1 (OSO-21-WT1 and OSO-30-WT1) started development as part of a family of airfoils being designed to target the IEA 22 MW wind turbine. The criteria used to design these airfoils are summarized in Table 1, which aim to encapsulate requirements of modern airfoils for offshore wind turbine applications, and were developed with feedback from industry and research experts. The airfoils were designed using XFOIL and candidate airfoils were then analyzed in RFOIL, which is considered more accurate than XFoil for high lift predictions of thicker airfoils. The design process for a preliminary family of airfoils is available, including a more detailed explanation of the design requirements and metrics similar to those used for these airfoils. Most of the design criteria are met for these two airfoils, with two exceptions. For both airfoils, the L/D Roughness Loss metric is exceeded (42% > 40% goal) and the desired lift coefficient margin over the design value (“CL_Margin”) was moderately exceeded (0.43 > 0.3) while smooth-stall characteristics (computed) were achieved. Note that all of the metrics were computed using RFOIL, and like other new airfoils, these will need to be experimentally validated at a range of Reynolds numbers. The airfoil coordinates will be shared publicly on Sadia National Laboratories’ public Github repository:
This project created a framework for efficient, accurate, and scalable deep neural network representations of design optimization problem solutions. The inputs to these DNN representations are the vector of design requirement parameters, the outputs are the optimal design variables, and the goal is to learn the map from inputs to outputs (i.e., inverse design). The team addressed the problem of the optimal shape design of aerodynamic lifting surfaces—in particular aircraft wings—using a Reynolds-Average Navier Stokes model to govern the CFD-based aerodynamic shape optimization. The inverse design map for such problems is very complex and high-dimensional, involving inputs and outputs on the order of 1000s. To approximate this inverse design map, the team developed algorithms to construct parsimonious DNN architectures, which automatically identify low-dimensional manifolds in which design requirements affect optimal shape parameters, and trained these architectures with multifidelity optimization methods. The resulting methodology accurately and automatically designs optimal aerodynamic lifting surfaces with very high accuracy (99%) at interactive speeds, of the order of milliseconds, resulting in factors of one million or more speedup relative to CFD-based design optimization.
Historically, heavy-duty off-road equipment has prioritized performance, reliability, and cost, with limited emphasis on efficiency. While increasing carbon dioxide (CO 2 ) regulations have driven a focused effort for efficiency in on-road vehicles, off-road machines have remained largely overlooked, leaving significant opportunities for efficiency improvements and emissions reductions. To address this overlooked industry, Michigan Technological University’s Advanced Power Systems Research Center (APS LABS) worked with Pettibone to determine a unique electrified architecture for Pettibone’s heavy-duty off-road material handler, the Cary-Lift 204i, with a goal of 20% fuel savings. The base Cary-Lift uses a diesel engine with no electrification.
This paper summarizes the High-Order Technical Focus Group (HO-TFG) submissions for the joint 4th AIAA High Lift Prediction (HLPW-4) and 3rd Geometry and Mesh Generation Workshop (GMGW-3). The goal of the workshop was to assess the state-of-the-art in mesh generation and computational fluid dynamics software. The Common Research Model High-Lift (CRM-HL) variant served as the primary focus of the workshop, and a two-dimensional airfoil section from the CRM-HL was used as a verification test case. Here, the HO-TFG was tasked with generating high-order curved meshes for both geometries, and computing high-order solutions using both Reynolds-averaged Navier–Stokes and scale-resolving formulations. While limited by computational resources, the final results demonstrate the potential of higher-order methods to increase solution accuracy with a lower degree-of-freedom count relative to second-order discretizations.
In the present study, an algebraic equilibrium wall model previously developed for hexahedral elements is extended to handle mixed meshes including prismatic, tetrahedral, and pyramidal elements in the context of a discontinuous high-order method. This extension is needed for complex geometries, for which high-order mixed elements (e.g., tetrahedral and pyramidal elements) are often necessary near solid walls to avoid meshing challenges. Various design decisions are discussed to achieve the best performance on massively parallel CPU/GPU architectures for a production-level high-order large-eddy simulation solver based on the flux reconstruction/correction procedure via reconstruction method, hpMusic. The extension to other elements is first evaluated using a benchmark channel flow problem at various Reynolds numbers. After that, flow over the NASA high-lift Common Research Model (CRM-HL) from the 4th AIAA High-lift Prediction Workshop is computed to further test the new implementation. Computational results at the third- and fourth-order accuracies are compared with experimental data.
Theodorsen’s unsteady aerodynamic theory has been used extensively in flutter speed prediction of wind turbine blades. In this study, three key assumptions of Theodorsen theory (thin airfoil, flat wake, and small angle of attack) have been revisited, and all three assumptions have been addressed in combination to obtain new lift and moment equations that are subsequently applied in flutter calculations for full-scale vertical-axis wind turbine (VAWT) rotors, not just of an individual airfoil or blade. Furthermore, edgewise aerodynamics terms are added to the lift and moment equations to include their effects on flutter speeds. The newly obtained equations were implemented in the OWENS (Offshore Wind ENergy Simulation) toolkit, which is an FEM (Finite Element Method)-based toolkit for aeroelastic analysis of VAWTs. The effect of modifying each of these assumptions has been studied for the flutter RPM prediction of three primary modes of flutter of VAWTs: propeller, butterfly, and tower modes. For the land-based case, the most change was observed for the flutter RPM of the propeller mode, with a maximum increase of 2.62% for the two-bladed UTD 5 MW VAWT case. For the floating offshore case, the primary flutter modes (tower and platform pitch) were not significantly affected.
This paper summarizes the High-Order Technical Focus Group (HO-TFG) submissions for the joint 4th AIAA High Lift Prediction and 3rd Geometry and Mesh Generation Workshop. The goal of the workshop was to assess the state-of-the-art in mesh generation and computational fluid dynamics software. The Common Research Model High-Lift (CRM-HL) variant served as the primary focus of the workshop, and a 2D airfoil section from the CRM-HL was used as a verification test case. The HO-TFG was tasked with generating high-order curved meshes for both geometries, and computing high-order solutions using both Reynolds Averaged Navier-Stokes and scale resolving formulations. While limited by computational resources, the final results demonstrate the potential of higher-order methods to increase solution accuracy with a lower degree of freedom count relative to second-order discretizations.
For the past 30 years, offshore wind turbines exhibited a continual pattern of growth that is expected to continue as the industry pushes for higher efficiency. Current designs for the next generation of wind turbines are so large that the chordwise Reynolds number of the blades is well beyond the design range of existing open-source airfoil families. This paper presents a preliminary family of new airfoils designed specifically for the needs of these next-generation offshore turbines, ranging from 21% thick to 30% thick with operating Reynolds numbers between 12 million and 18 million. These airfoils are intended to be alternative to the FFA airfoils that are commonly used on reference turbines such as the IEA 15MW and 22MW designs. In this work, airfoil performance metrics and design targets are developed, the design process is outlined, an optimization scheme is presented, and finally the airfoils and their simulated performance are compared to existing baselines. Lift to drag ratios in a clean condition were improved by up to 49.3% from the baseline FFA airfoil, and rough condition lift to drag ratio was improved by up to 9.3%. It is estimated that the cumulative improvements provided by this airfoil family would result in an approximately 1% increase of Annual Expected Power (AEP) for the 22 MW turbine compared to the current baseline.
Decades of wind turbine research, development and installation have demonstrated reductions in levelized cost of energy (LCOE) resulting from turbines with larger rotor diameters and increased hub heights. Further reductions in LCOE by up-scaling turbine size can be challenged by practical limitations such as the square-cube law: where the power scales with the square of the blade length and the added mass scales with the volume (the cube). Active blade load control can disrupt this trend, allowing longer blades with less mass. This paper presents the details of the development of a robust load control system to reduce blade fatigue loads. The control system, which we coined sectional lift control or SLC, uses a lift actuator model to emulate an active flow control device. The main contributions of this paper are: (1) Methodology for SLC design to reduce dynamic blade root moments in a neighborhood of the rotor angular frequency (1P). (2) Analysis and numerical evidence supporting the use of a single robust SLC for all wind speeds, without the need for scheduling on wind speed or readily available measurements such as collective pitch or generator angular speed. (3) Intuition and numerical evidence to demonstrate that the SLC and the turbine controller do not interact. (4) Evaluation of the SLC using a full suite of fatigue and turbine performance metrics.
A variety of needle-motion profiles are used in diesel injectors. However, it is unclear what the underlying mechanism is to determine the needle-motion profiles and how they affect the spray dynamics. It has been of significant interest to examine how the spray dynamics will change if only altering the needle valve opening speed or closing speed while all other parameters are kept the same. The different needle-motion profiles were obtained using a piezo nozzle (Nozzle #P) and a solenoid nozzle (Nozzle #S), which have identical nozzle geometry. By utilizing the X-ray imaging technique, it was observed that the average needle valve speed of Nozzle #P was 51% higher at the opening stage but 17% lower at the closing stage than Nozzle #S. When the needle valve lift is low (approximately 200 μm), the needle valve opening speed has a crucial effect on spray dynamics. The faster needle valve opening of Nozzle #P results in a 42% larger spray spreading angle and 34% lower spray velocity at the downstream field. The spray dynamics may be controllable by properly designing the needle-motion profiles in the scenarios of the low needle lifts. However, when the needle valve is sufficiently open (approximately over 200 μm), almost identical spray characteristics were observed regardless of the needle-motion profiles.
Magnetic force microscopy (MFM) enables mapping local magnetic fields across a sample surface with nanoscale resolution. To perform MFM, an atomic force microscopy (AFM) probe whose tip has been magnetized vertically (i.e., perpendicular to the probe cantilever) is oscillated at a fixed height above the sample surface. The resultant shifts in the oscillation phase or frequency, which are proportional to the magnitude and sign of the vertical magnetic force gradient at each pixel location, are then tracked and mapped. Although the spatial resolution and sensitivity of the technique increases with decreasing lift height above the surface, this seemingly straightforward path to improved MFM images is complicated by considerations such as minimizing topographical artifacts due to shorter range van der Waals forces, increasing the oscillation amplitude to further improve sensitivity, and the presence of surface contaminants (in particular water due to humidity under ambient conditions). In addition, due to the orientation of the probe's magnetic dipole moment, MFM is intrinsically more sensitive to samples with an out-of-plane magnetization vector. Here, high-resolution topographical and magnetic phase images of single and bicomponent nanomagnet artificial spin-ice (ASI) arrays obtained in an inert (argon) atmosphere glovebox with <0.1 ppm O 2 and H 2 O are reported. Further, optimization of lift height and drive amplitude for high resolution and sensitivity while simultaneously avoiding the introduction of topographical artifacts is discussed, and detection of the stray magnetic fields emanating from either end of the nanoscale bar magnets (~250 nm long and <100 nm wide) aligned in the plane of the ASI sample surface is shown. Likewise, using the example of a Ni-Mn-Ga magnetic shape memory alloy (MSMA), MFM is demonstrated in an inert atmosphere with magnetic phase sensitivity capable of resolving a series of adjacent magnetic domains each ~200 nm wide.