Search NASA⌕ Search

SEARCH · Search NASA

Results for “Line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The structure of W49 A as deduced from molecular and recombination line observations

The molecular cloud complex W49 A has been observed in the 2.6-mm CO line, the 2-cm H2CO line, and the H76-alpha recombination line. These observations are most consistent with a picture of the complex in which a large H II region lies between two massive molecular clouds. Using a simple hydrodynamic model coupled with calculations of radiative transfer in the recombination lines, it is found that many of the spectral-line and continuum observations obtained on this region can be naturally explained, including: (1) the multiple structure observed in the molecular lines and the single structure in the recombination lines; (2) the local standard of rest (LSR) velocities of both the molecular and recombination lines; (3) the velocity gradients observed in the lines; (4) the continuum emission from the H II region; and (5) the line widths and line-to-continuum ratios of the recombination lines.

Mufson, S. L.↗

The XMM-Newton Iron Line Profile of NGC 3783

We report on observations of the iron K line in the nearby Seyfert 1 galaxy, NGC 3783, obtained in a long, 2 orbit (approx. 240 ks) XMM-Newton observation. The line profile obtained exhibits two strong narrow peaks at 6.4 keV and at 7.0 keV, with measured line equivalent widths of 120 and 35 eV respectively. The 6.4 keV emission is the K(alpha) line from near neutral Fe, whilst the 7.0 keV feature probably originates from a blend of the neutral Fe K(beta) line and the Hydrogen-like line of Fe at 6.97 keV. The relatively narrow velocity width of the K(alpha) line (approx. less than 5000 km/s), its lack of response to the continuum emission on short timescales and the detection of a neutral Compton reflection component are all consistent with a distant origin in Compton-thick matter such as the putative molecular torus. A strong absorption line from highly ionized iron (at 6.67 keV) is detected in the time-averaged iron line profile, whilst the depth of the feature appears to vary with time, being strongest when the continuum flux is higher. The iron absorption line probably arises from the highest ionization component of the known warm absorber in NGC 3783, with an ionization of log xi approx 3 and column density of N(sub H) approx. 5 x 10(exp 22)/sq cm and may originate from within 0.1 pc of the nucleus. A weak red-wing to the iron K line profile is also detected below 6.4 keV. However when the effect of the highly ionized warm absorber on the underlying continuum is taken into account, the requirement for a relativistic iron line component from the inner disk is reduced.

Reeves, J. N.↗

Pulsed Airborne Lidar Measurements of Atmospheric CO2 Column Absorption and Line Shapes from 3-13 km Altitudes

We have developed a pulsed lidar technique for measuring the tropospheric CO2 concentrations as a candidate for NASA's planned ASCENDS space mission. Our technique uses two pulsed laser transmitters allowing simultaneous measurement of a CO2 absorption line in the 1570 nm band, O2 extinction in the Oxygen A-band and surface height and backscatter. The lidar measures the energy and time of flight of the laser echoes reflected from the atmosphere and surface. The lasers are rapidly and precisely stepped in wavelength across the CO2 line and an O2 line region during the measurement. The direct detection receiver uses a telescope and photon counting detectors, and measures the background light and energies of the laser echoes from the surface along with scattering from any aerosols in the path. The gas extinction and column densities for the CO2 and O2 gases are estimated from the ratio of the on- and off- line signals via the DIAL technique. Time gating is used to isolate the laser echo signals from the surface, and to reject laser photons scattered in the atmosphere. The time of flight of the laser pulses are also used to estimate the height of the scattering surface and to identify cases of mixed cloud and ground scattering. We have developed an airborne lidar to demonstrate the CO2 measurement from the NASA Glenn Lear-25 aircraft. The airborne lidar steps the pulsed laser's wavelength across the selected CO2 line with 20 steps per scan. The line scan rate is 450 Hz, the laser pulse widths are 1 usec, and laser pulse energy is 24 uJ. The time resolved laser backscatter is collected by a 20 cm telescope, detected by a photomultiplier and is recorded by a photon counting system. We made initial airborne measurements on flights during fall 2008. Laser backscatter and absorption measurements were made over a variety of land and water surfaces and through thin clouds. The atmospheric CO2 column measurements using the 1572.33 nm CO2 lines. Two flights were made above the US Department of Energy's (DOE) SGP ARM site at altitudes from 3-8 km. These flights were coordinated with DOE investigators who flew an in-situ CO2 sensor on a Cessna aircraft under the path. The increasing CO2 line absorptions with altitudes were evident and comparison with in-situ measurements showed agreements to 6 ppm. In spring 2009 we improved the aircraft's nadir window and during July and August we made 9 additional 2 hour long flights and measured the atmospheric CO2 absorption and line shapes using the 1572.33 nm CO2 line. Measurements were made at stepped altitudes from 3-13 km over a variety of surface types in Nebraska, Illinois, the SGP ARM site, and near and over the Chesapeake Bay in North Carolina and eastern Virginia. Strong laser signals and clear CO2 line shapes were observed at all altitudes, and some measurements were made through thin clouds. The flights over the ARM site were underflown with in-situ measurements made from the DOE Cessna. Analysis shows that the average signal levels follow predicted values, the altimetry measurements had an uncertainty of about 4 m, and that the average optical line depths follow the number density calculated from in-situ sensor readings. The Oklahoma and east coast flights were coordinated with a LaRC/ITT CO2 lidar on the LaRC UC-12 aircraft, a LaRC in-situ CO2 sensor, and the Oklahoma flights also included a JPL CO2 lidar on a Twin Otter aircraft. More details of the flights, measurements, analysis and scaling to space will be described in the presentation.

Abshire, James↗

Structural Analysis of Pressurized Small Diameter Lines in a Random Vibration Environment

The pressurization and propellant feed lines for the Ares 1 Upper Stage Reaction and Roll Control Systems (ReCS and RoCS) were required to be in a high g-load random vibration flight environment. The lines connected the system components and were filled with both liquid hydrazine and gaseous helium. They are considered small and varied between one fourth to one inch in diameter. The random vibration of the lines was considered to be base excitation through the mating components and mounting hardware. It was found that reducing the amount of support structure for the lines added flexibility to the system and improved the line stresses from random vibration, but caused higher stresses from the static g-loads. The locations and number of brackets were optimized by analyzing the mode shapes of the lines causing high stresses. The use of brackets that only constrain motion in the direction of concern further reduced the stresses in the lines. Finite element analysis was used to perform the analysis. The lines were pre-stressed by temperature and internal pressure with fluid and insulation included as non-structural mass. Base excitation was added to the model using Power Spectral Density (PSD) data for the expected flight loads. The random vibration and static g-load cases were combined to obtain the total stress in the lines. This approach advances the state of the art in line analysis by using FEA to predict the stresses in the lines and to optimize the entire system based on the expected flight environment. Adding flexibility to lines has been used in piping system for temperature loads, but in flight environments flexibility has been limited for the static stresses. Adding flexibility to the system in a flight environment by reducing brackets has the benefit of reducing stresses and weight

Davis, Mark↗

Electron Stark Broadening Database for Atomic N, O, and C Lines

A database for efficiently computing the electron Stark broadening line widths for atomic N, O, and C lines is constructed. The line width is expressed in terms of the electron number density and electronatom scattering cross sections based on the Baranger impact theory. The state-to-state cross sections are computed using the semiclassical approximation, in which the atom is treated quantum mechanically whereas the motion of the free electron follows a classical trajectory. These state-to-state cross sections are calculated based on newly compiled line lists. Each atomic line list consists of a careful merger of NIST, Vanderbilt, and TOPbase line datasets from wavelength 50 nm to 50 micrometers covering the VUV to IR spectral regions. There are over 10,000 lines in each atomic line list. The widths for each line are computed at 13 electron temperatures between 1,000 K 50,000 K. A linear least squares method using a four-term fractional power series is then employed to obtain an analytical fit for each line-width variation as a function of the electron temperature. The maximum L2 error of the analytic fits for all lines in our line lists is about 5%.

Liu, Yen↗

Quantitative validation of Ames IR intensity and new line lists for (32/33/34)S(16)O2, (32)S(18)O2 and (16)O(32)S(18)O

The quality of Ames-296K SO2 Infrared (IR) line list intensities is first validated by quantitative exploration of several dipole moment surfaces (DMSs) and partition sum convergence. The DMSs are computed with several of Dunning’s correlation-consistent basis sets and their vibrational dependence are compared to the empirical model derived from Stark effect experiments reported by D. Patel, D. Margolese, and T.R. Dykea [J.Chem.Phys. 70, 2740 (1979)]. The effective dipole deviations from the DMS adopted in the Ames IR lists is 0.2-0.4% for vibrational states up to 3v3. The vibrational dependence of the dipole moment is also in good agreement, except for nv1. Partition sum convergence at 296K is confirmed by new calculations with rotational quantum number J up to 150 and upper state E’ up to 8000 cm-1. The isotopologue consistency of the Ames IR line lists is superior relative to the regular Effective Hamiltonian (EH) models and Effective Dipole Moment (EDM) models. The v1+v2 and v2+v3 intensity consistency check reveals the recently reported experimental intensities need significant improvement or re-analysis. After the accuracy, convergence, and isotopologue consistency have been confirmed, the theoretical Ames-296K intensities are combined with the experimental line positions or EH models that experimental spectroscopists published after 2009. Three high-resolution IR line sets are reported for the (32/33/34)S(16)O2, (32)S(18)O2 and (16)O(32)S(18)O isotopologues: (1) the “New Lines Sets” include experimentally measured line positions; (2) the “Expanded Line Sets” include possible transitions among new rovibrational levels assigned in experiments and ground state (GS) levels predicted by reliable EH models; (3) the “Ames + MARVEL Sets” include possible transitions among all those levels reported in a recent MARVEL analysis. [Tóbiás et al, JQSRT 208, 152 (2018)]. Compared to the limited data in High-resolution TRANsmission molecular absorption database (HITRAN), these line sets have significantly improved the data coverage up to 4000 cm-1. Some missing bands can be traced to the unpublished experimental data. The isotopologue consistency of these line sets will help identify the uncertainties and defects in the experimental EH and EDM models. These line sets are good candidates for the next HITRAN update, if line shape parameters are available. The line sets can be downloaded from supplementary files or from the Ames Molecular Spectroscopic Database at http://huang.seti.org.

Xinchuan Huang↗

A solar spectral line list between 10 and 200 A modified for application to high spectral resolution X-ray astronomy

A spectral line list for the 10-200 A range is developed from existing solar spectra for application to high spectral resolution measurements of astrophysical plasmas. The solar spectral line lists are merged into a single comprehensive list. The effect of the solar emission measure distribution is removed from the line intensities, which results in a set of emission rates for the lines that can be applied to many optically thin, low density high temperature plasmas in ionization equilibrium. In addition to the measured solar lines, 250 theoretical lines are added to this list. These lines fall in wavelength regions where the existing solar lists have few lines because of limitations in instrumental sensitivity. Also, some lines have been added because the sun has very little plasma at temperatures of about one million K, and consequently these lines are weak or absent in solar spectra. The entire list contains about 600 lines. Finally, predicted spectra of the two RS CVn stars, alpha Aur (Capella) and UX Ari, are presented at 1 and 0.25 A spectral resolution. Also, the solar spectrum is shown at 1 A resolution, and the emission rate spectrum (spectrum not modified by an emission measure distribution) is shown at very high spectral resolution. The predicted spectra for Capella and UX Ari are based on results obtained from the Einstein and International Ultraviolet Explorer (IUE) spacecraft.

Doschek, G. A.↗

Parachute having improved vent line stacking

A parachute having an improved vent line stacking wherein the parachute is provided with a canopy having a central vent opening and a vent band secured to the canopy around the periphery of the vent opening, with a plurality of vent lines each lying on a diameter of the vent opening and having its ends secured to the vent band on opposite sides of the vent opening is described. The vent lines are sewed to the vent band in an order such that the end of a first vent line is sewed to the vent band at a starting point with the end of a second vent band then being sewed to the vent band adjacent to and counterclockwise from the first band. A third vent band is sewed to the vent band adjacent to and clockwise from the first band, with a fourth vent band being sewed to the vent band adjacent to and counterclockwise from the second vent band. It can be seen that, if the vent lines are numbered in the order of being sewed to the vent band, the odd numbered vent lines will run consecutively in a clockwise direction and the even numbered lines will run consecutively in a counterclockwise direction from the starting point. With this order of assembly, each and every vent line will be separated from adjacent vent lines by no more than one vent line in the center of the vent opening where the vent lines cross.

Hengel, John E.↗

Evidence for a disk in the wind of HD 93521: UV line profiles from an axisymmetric model

Recently it has been suggested (Massa 1992; Howarth & Reid 1993), from the C IV ultraviolet resonance line profile of HD 93521, that there is a high-speed component in the polar outflow from the star as well as a low-speed component in the equatorial regions. In this paper we present theoretical calculations of the line profiles that would be produced by such a model. We find from Hubble Space Telescope (HST) Goddard High Resolution Spectrograph (GHRS) observations of HD 93521 that the observed C IV profile can be produced if the star has an inclination angle very close to 90 deg and if the star is surrounded by a thin disk, whose half-width is approximately 3 deg in latitude. The geometry of this disk is similar to what one would expect from the wind-compressed disk model of Bjorkman & Cassinelli, so this star may provide an ideal observational test of that model. In addition to the C IV resonance line, we examine both the Si IV and N V resonance lines. The Si IV line exhibits low-velocity absorption that is similar to that seen in the C IV line, but the emission is much weaker. On the other hand, the N V line has weaker absorption and much stronger emission than the C IV line. N V is a higher ionization state than C IV, so it is likely that N V is one stage above the dominant state, N IV. Apart from fitting individual line profiles, we also examine the differences between the two Hubble Space Telescope observations of HD 93521. We find evidence for a pair of narrow absorption components, seen at low velocity, as well as evidence for a discrete emission feature in the blueshifted absorption cores of the lines. This blueshifted emission at low velocity can cause what instead appears to be an interstella absorption line. Without multiple observations that can reveal the temporary emission, one must be very careful when determining interstellar column densities to stars like HD 93521.

Bjorkman, J. E.↗

Consensus Assignments for Water Vapor Lines Not Assigned on the HITRAN Database: 13,200 to 16,500/cm

There are nearly 800 water Vapor-lines in the 13,200-16,500/cm region that do not have rovibrational assignments in the HITRAN database. The positions and intensities in the database were determined by Mandin et al., but assignments could not be determined at that time. Polyansky, et al. have now assigned over 600 of the unassigned lines in the 11,200-16,500/cm region. Schwenke has also given rovibrational assignments to many of these unassigned lines throughout the visible and near-infrared. Both articles changed the assignments of some HITRAN lines. Carleer et al. extend assignments to some weaker lines measured by them on new spectra with excellent signal/noise. However, some lines measured by Mandin et al. were omitted by Carleer, et al. because of blends due to lower spectral resolution. The rovibrational assignments of Polyansky et al. completely agree with those in Schwenke's article for only about 200 lines. However, Schwenke's ab initio line list is available on his internet site (http://ccf.arc.nasa.gov/-dschwenke). A detailed comparison of the Polyansky et al.line list, the Carleer et al.line list, and Schwenke's ab initio line list shows a larger number of agreements. In many cases the disagreement is only about the vibrational and/or rotational upper level, while there is agreement on the lower state assignment and energy level, "E", which is of primary importance for atmospheric applications. We will present a line list of "consensus" assignments in the 13,200-16,500/cm region for consideration of inclusion on the HITRAN and GEISA databases. This will substantially reduce the number of unassigned lines on the databases in this spectral region.

Giver, Lawerence P.↗

Variable Iron K(alpha) Lines in Seyfert 1 Galaxies

We find that variability of the iron K alpha line is common in Seyfert 1 galaxies. Using data from the ASCA archive for objects that have been observed more than once during the mission, we study the time-averaged spectra from individual observations, thereby probing variability on timescales that range from days to years. Since the statistics of the data do not warrant searches for line variability in terms of a complex physical model, we use a simple Gaussian to model the gross shape of the line and then use the centroid energy, intensity, and equivalent width as robust indicators of changes in the line profile. We find that approximately 70% of Seyfert 1 galaxies (10 out of 15) show variability in at least one of these parameters: the centroid energy, intensity, and equivalent width vary in six, four, and eight sources, respectively. Because of the low signal-to-noise ratio, limited sampling, and time averaging, we consider these results to represent lower limits to the rate of incidence of variability. In most cases changes in the line do not appear to track changes in the continuum. In particular, we find no evidence for variability of the line intensity in NGC 4151, suggesting an origin in a region larger than the putative accretion disk, where most of the iron line has been thought to originate. Mrk 279 is investigated on short timescales. The time-averaged effective line energy (as measured by the Gaussian center energy, which is weighted by emission in the entire line profile) is 6.5 keV in the galaxy rest frame. As the continuum flux increases by 20% in a few hours, the Fe K line responds within approximately 10,000 seconds with the effective line energy increasing by 0.22 keV (approximately 10,500 kilometers per second). We also examine the ROSAT PSPC spectrum of Mrk 279 but find inconsistencies with ASCA. Problems with the ASCA and ROSAT calibration that affect simultaneous spectral fits at low energies are discussed in an appendix.

Weaver, K. A.↗

A Passive Method for Detecting Vegetation Stress from Orbit: Chlorophyll Fluorescence Spectra from Fraunhofer Lines

Solar-stimulated chlorophyll fluorescence measured with the Fraunhofer line depth method has correlated well with vegetation stress in previous studies. However, the instruments used in those studies were limited to a single solar absorption line (e.g. 656.3 nm), obviating the red/far-red ratio (R/FR) method. Optics and detector technology have reached the level whereby multiple, very narrow Fraunhofer lines are resolvable. Thirteen such lines span the visible spectrum in the red to far-red region where chlorophyll fluorescence occurs. Fluorescence intensities at the 13 Fraunhofer line wavelengths were used to model emission spectra. The source data were collected for summer and fall bean crops (Phaseolus vulgaris L.) subjected to various levels of nitrogen fertilization. The intensities were adjusted to account for Fraunhofer line depth and atmospheric transmittance. Multiple R/FR fluorescence ratios, calculated from the modeled fluorescence spectra, correlated strongly with leaf chlorophyll concentration and well with applied nitrogen. The ratio yielding the best correlation with chlorophyll utilized red fluorescence at the 694.5 nm Fraunhofer line and farred fluorescence at the 755.6 nm Fraunhofer line. Twenty R/FR ratios, each evaluated for the maximum differential between low and high (optimal) nitrogen treatments, ranked higher in some cases and lower in others, possibly related to the time of year the crops were grown and the stage of growth of the crops. Ratios with 728.9 nm and 738.9 nm in the denominator consistently ranked in the lowest and next lowest quartile, respectively. Ratios of the 656.3 nm Fraunhofer line and the 755.6 nm line consistently ranked highest for the summer crop. Ratios with 755.6 nm in the denominator ranked in the upper quartile for 10 out of 12 measurement dates. Differences in ratio ranking indicate that physiological conditions may be estimated using selected ratios of Fraunhofer lines within the context of R/FR analysis. A passive instrument designed to monitor R/FR chlorophyll fluorescence (i.e. vegetation stress) from orbit could be built today.

Theisen, Arnold F.↗

Evidence for Doppler-Shifted Iron Emission Lines in Black Hole Candidate 4U 1630-47

We report the first detection of a pair of correlated the X-ray spectrum of black hole candidate 4U 1630-47 outburst, based on Rossi X-Ray Timing Explorer (RXTE) emission lines in during its 1996 observations of the source. At the peak plateau of the outburst, the emission lines are detected, centered mostly at approx. 5.7 and approx. 7.7 keV, respectively, while the line energies exhibit random variability approx. 5%. Interestingly, the lines move in a concerted manner to keep their separation roughly constant. The lines also vary greatly in strength, but with the lower energy line always much stronger than the higher energy one. The measured equivalent width ranges from approx. 50 to approx. 270 eV for the former, and from insignificant detection to approx. 140 eV for the latter; the two are reasonably correlated. The correlation between the lines implies a causal connection; perhaps they share a common origin. Both lines may arise from a single K & alpha; line of highly ionized iron that is Doppler shifted either in a Keplerian accretion disk or in a bipolar outflow or even both. In both scenarios, a change in the line energy might simply reflect a change in the ionization state of line-emitting matter. We discuss the implication of the results and also raise some questions about such interpretations.

Cui, Wei↗

Pulsed Airborne Lidar Measurements of Atmospheric CO2 Column Absorption and Line Shapes from 3-13 km Altitudes

We have developed a lidar technique for measuring the tropospheric C02 concentrations as a candidate for NASA's planned ASCENDS mission. Our technique uses two pulsed laser transmitters allowing simultaneous measurement of a C02 absorption line in the 1570 nm band, 02 extinction in the Oxygen A-band and surface height and backscatter. The lidar measures the energy and time of flight of the laser echoes reflected from the atmosphere and surface. The lasers are stepped in wavelength across the C02 line and an 02 line region during the measurement. The receiver uses a telescope and photon counting detectors, and measures the background light and energies of the laser echoes from the surface along with scattering from any aerosols in the path. The gas extinction and column densities for the C02 and 02 gases are estimated from the ratio of the on- and off- line signals via the DIAL technique. Time gating is used to isolate the laser echo signals from the surface, and to reject laser photons scattered in the atmosphere. We have developed an airborne lidar to demonstrate the C02 measurement from the NASA Glenn Lear 25 aircraft. The airborne lidar steps the pulsed laser's wavelength across a selected C02 line with 20 steps per scan. The line scan rate is 450 Hz and laser pulse widths are I usec. The time resolved laser backscatter is collected by a 20 cm telescope, detected by a photomultiplier and is recorded by a photon counting system. We made initial airborne measurements on flights during October and December 2008. Laser backscatter and absorption measurements were made over a variety of land and water surfaces and through thin and broken clouds. Atmospheric C02 column measurements using the 1571.4, 1572.02 and 1572.33 nm C02 lines. Two flights were made above the DOE SGP ARM site at altitudes from 3-8 km. These nights were coordinated with DOE investigators who Hew an in-situ C02 sensor on a Cessna aircraft under the path. The increasing C02 line absorptions with altitudes were evident and comparison with in-situ measurements showed agreements to 6 ppm. This spring we improved the aircraft's nadir window. During July and August 2009 we made 9 additional 2 hour long flights and measured the atmospheric C02 absorption and line shapes using the 1572.33 nm C02 line. Measurements were made at stepped altitudes from 3-13 km over a variety of surface types in Nebraska, Illinois, the SGP ARM site, and near and over the Chesapeake Bay in North Carolina and Virginia. Strong laser signals and clear line shapes were observed at all altitudes, and some measurements were made through thin clouds. The flights over the ARM site were underflown with in-situ measurements made from the DOE Cessna. The Oklahoma and east coast t1ights were coordinated with a LaRC/ITT C02 lidar on the LaRC UC-12 aircraft, a LaRC in~situ C02 sensor, and the Oklahoma flights also included a JPL C02 lidar on a Twin Otter aircraft. Ed Browell and Gary Spiers led the LaRC and JPL teams. More details of the t1ights, measurements and analysis will be described in the presentation.

Abshire, J. B.↗

Discovery of iron line emission in the Hercules X-1 low-state spectrum with HEAO 1

Results are reported for HEAO 1 observations of Her X-1 which confirm the existence of the iron line-emission feature discovered with OSO 8 in the high-state spectrum and also reveal an iron emission feature in the low-state spectrum. The iron line-emission feature in the low-state spectrum was detected at a significance level greater than 5 sigmas and is characterized by a line energy of 6.4 keV, an equivalent width larger than that of the high-state line, a binary phase dependence of the line intensity, and a line width that is intrinsically narrow in contrast to the broad high-state line. The observed line energy and narrow line width are shown to be consistent with an interpretation in terms of fluorescence emission due to X-ray heating. It is suggested that HZ Her contributes no more than about 10% of the predicted line flux, that this emission is reflected from a highly ionized plasma, and that a hot coronal gas is an important source of the low-state X-rays.

Pravdo, S. H.↗

Asymmetries of the emission lines of QSOs, Seyfert galaxies, and novae

Calculations of the anisotropy of line emission from photoionized clouds, and the resulting asymmetry in the line profiles are discussed. The permitted emission-line profiles of Seyfert galaxies and QSO's often contain more light in the red than in the violet wing, and this asymmetry can arise from self-absorption of the line radiation in an expanding system of optically thick clouds. It is shown that the Balmer line optical depths are large enough to give strongly asymmetric line profiles for pure expansion, but the observed lack of strong asymmetry in the Balmer lines of most Seyfert galaxies suggests that the broad-line widths may result from random motions, or that clouds radiate isotropically. It is concluded that the frequently observed absorption of the violet wing of Lyman-alpha must occur in a surrounding region undergoing systematic outflow, or that the weakness of the Balmer line asymmetries is explained by the Balmer line emission resulting from collisional excitation from n=2.

Ferland, G. J.↗

Ultraviolet and optical spectroscopy of NGC 5548 and the nature of the broad-line region

The structure of the broad-line region in NGC 5548 is investigated by analysis of the integrated flux and profile variations observed in optical and ultraviolet emission lines. It is shown that the observations do not appear to be consistent with models which identify the variable part of the emission lines with a simple rotating disk structure. The variable continuum, and integrated emission-line fluxes are highly correlated and suggest a small broad-line region (18 light days = 5 x 10 to the 16th cm), although the size of the line-emitting region is not well-determined. At least some of the broad emission arises in a component which at times appears very prominently and distinctly in difference spectra. This emission component appears to arise in a region which is physically distinct from the rest of the broad-line region. Although the integrated fluxes in the various optical and ultraviolet emission lines seem to vary together, there clearly are differences between the profiles of various lines, which suggests that there is at least some ionization stratification within the broad-line region.

Peterson, Bradley M.↗

The intermediate line region of QSOs

Our recent statistical investigations of broad UV lines of luminous quasars (QSOs) suggest that the traditional broadline region (BLR) consists of two components-one of width approximately 2000 km/s FWHM with the peak within a few hundred kilometers per second of the systemic redshift, and another very broad component of width greater than or equal to 7000 km/s FWHM and blueshifted by greater than or equal to 1000 km/s. Differences in the relative strengths of these components account for much of the diversity of broad-line profiles, as well as relations among line strength, line width, asymmetry, and peak blueshift. We have suggested that the narrower component arises in a distinct intermediate-line region (ILR) that is an inner extension of the narrow-line region (NLR). We form spectra of the ILR and very broad line region (VBLR) in two complementary ways. First, using a small sample of high-quality spectra, we difference two composite spectra, one with FWHM (sub C IV) approximately 3000 km/s, the other with FWHM (sub C IV) approximately 7000 km/s (essentially a VBLR spectrum)-revealing a narrower line spectrum with FWHM approximately 2000 km/s. Second, we use a principal component analysis of 200 low signal-to-noise ratio spectra from the Large Bright Quasar Survey. The ILR is identified with the first principal component-that component accounting for most of the spectrum-to-spectrum variation. The VBLR spectrum is derived by subtracting this ILR from the mean spectrum. The two methods yield similar results, and the spectra of the ILR and VBLR are very different. Additional support for the existence of two component is the lack of a correlation between the equivalent widths of the ILR and VBLR. We discuss the relationships between the VBLR, the ILR, and the traditional NLR. The ILR line intensity ratios are distinctly different from those of the VBLR, with (relative to C IV lambda 1549) stronger Lyman alpha and weaker N v lambda 1240, lambda 1400 feature, He II lambda 1640, O III lambda 1663, and Al III lambda 1860. Comparison with other active galactic nuclei (AGN) emission-line regions shows that the ILR spectrum tends to be intermediate between that of the VBLR and that of gas more distant from the ionizing continuum, such as the NLR and extended Lyman alpha nebulosity. Comparison of the spectra with results from photoionization models suggests that, compared with the VBLR, the ILR is about 10 times more distant from the ionizing continuum (approximately 1 pc), 100 to 1000 times less dense (10(exp 10)/cu cm), and has a smaller covering factor (less than or approximately 3%, compared with approximately 24% for the VBLR).

Brotherton, M. S.↗