Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lunar regolith simulant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Lunar powder simulator under lunarlike conditions - Dielectric properties

A powered basalt simulating lunar regolith material was subjected to temperature variations similar to those found in the lunar surface during a lunation. To obtain the dielectric response under simulated lunar conditions, all measurements were made in appropriate vacuums which, in addition, allowed for an evaluation of moisture effects in the powdered sample. It is found that during approximately seven tenths of a lunation the dielectric response of a 5- to 10-cm surface layer should be fairly constant. During the remaining three tenths, it should undergo rapid changes. Changes in the dielectric properties of the surface layer should be controlled by temperature. In the subjacent layers such changes are thought to be controlled by the increasing density of the regolith.

Alvarez, R.↗
NASA NTRSDate not supplied

Experimental Considerations for Ground-based Testing of Lunar Construction Technologies

The Moon-to-Mars Planetary Autonomous Construction Technology (MMPACT) project, under NASA’s Game Changing Division (GCD) aims to research, develop, and demonstrate lunar surface construction capabilities[1].A fundamental step in lunar infrastructure development is to quantify the geotechnical properties of lunar regolith, such as shear strength (Mohr-Coulomb cohesion and angle of internal friction), com-pression and bearing properties, and angle of re-pose. Knowledge of these geotechnical properties enables the prediction of forces and displacements associated with lunar infrastructure development processes including excavation and constructing landing pads, habitats, shelters, and roadways. Through ground-based testing of autonomous lunar systems performed using relevant hardware (e.g., robotic arms) in appropriate lunar regolith simulants, the developed hardware/technology and tool paths can be validated. Such testing also generates data to give insight into the geotechnical regolith properties on the lunar surface.

Regolith↗
NASA NTRSDate not supplied

Coarsening Up: Expanding the Particle Size Distributions of Lunar Simulants to Encompass A Comprehensive Range of Regolith Granularity

Due to a paucity of lunar regolith samples, simulated granular materials (simulants) have been developed and deployed for a variety of engineering and research purposes in an attempt to meet the requirements for lunar exploration. Broadly speaking, these manufactured materials aim to replicate the compositional (i.e., mineralogy and chemistry) and physical (e.g., particle size distribution, particle shape) profiles of lunar soil samples collected during the Apollo missions. While creating a “near-perfect” lunar simulant is prohibitive due to the unique formative processes (i.e., meteorite impacts, solar wind implantation) and conditions (anhydrous, reducing environment and exposure to radiation on the surface over billions of years) encountered on the moon, certain granular properties of the regolith can be recreated with a high level of fidelity by leveraging contemporary technologies. A fundamental physical property and descriptor, grain size can be correlated between samples and replicated through processing; however, a holistic understanding of the particle size distribution of lunar regolith must be considered when creating analog materials. This study produces particle size distributions for Apollo 16 returned samples, incorporating the sieved out >1 cm coarse-grained fraction, in order to provide a more comprehensive characterization of surficial lunar regolith grain sizes for the development of highlands-type granular analog testing materials.

R. N. Kovtun↗
NASA NTRS2010

2010 NASA Exploration Systems Mission Directorate: Lunabotics Mining Competition Systems Engineering Paper

A fast growing approach in determining the best design concept for a problem is to hold a competition in which the rules are based on requirements similar to the actual problem. By going public with such competitions, sponsoring entities receive some of the most innovative engineering solutions in a fraction of the time and cost it would have taken to develop such concepts internally. Space exploration is a large benefactor of such design competitions as seen by the results of X-Prize Foundation and NASA lunar excavation competitions [1]. The results of NASA's past lunar excavator challenges has led to the need for an effective means of collecting lunar regolith in the absence of human beings. The 2010 Exploration Systems Mission Directorate (ESMD) Lunar Excavation Challenge was created "to engage and retain students in science, technology, engineering, and mathematics, or STEM, in a competitive environment that may result in innovative ideas and solutions, which could be applied to actual lunar excavation for NASA." [2]. The ESMD Challenge calls for "teams to use telerobotics or autonomous operations to excavate at least 10kg of lunar regolith simulant in a 15 minute time limit" [2]. The Systems Engineering approach was used in accordance with Auburn University's mechanical engineering senior design course (MECH 4240-50) to develop a telerobotic lunar excavator, seen in Fig. 1, that fulfilled requirements imposed by the NASA ESMD Competition Rules. The goal of the senior design project was to have a validated lunar excavator that would be used in the NASA ESMD lunar excavation challenge.

Source record↗
NASA NTRSDate not supplied

Testbed for Lunar Extreme Environment Wear Tolerant Applications

The abrasive dust from lunar regolith poses significant long-term durability and performance challenges to materials, vehicles, mechanisms and structures that will be used for the next generation of lunar exploration. The development of advanced materials, coatings and device technologies that can withstand these abrasive particles and extreme environmental conditions is critical. However, the lack of standardized and accessible methods for evaluating such materials and devices in a facsimile of the harsh lunar environment hinders progress in dust-tolerant technologies. To address this challenge, NASA Langley Research Center is creating an extreme environment testbed. This reconfigurable testbed will allow rapid, repeatable wear testing of material and candidate mechanisms under vacuum conditions, facilitating the development of critical materials technologies for lunar exploration. Preliminary results from exposing an actuating mechanism similar to a pin joint to lunar regolith simulant under high vacuum are reported.

lunar dust↗
NASA NTRSDate not supplied

Testbed for Lunar Extreme Environment Wear Tolerant Applications

The abrasive dust from lunar regolith poses significant long-term durability and performance challenges to materials, vehicles, mechanisms and structures that will be used for the next generation of lunar exploration. The development of advanced materials, coatings and device technologies that can withstand these abrasive particles and extreme environmental conditions is critical. However, the lack of standardized and accessible methods for evaluating such materials and devices in a facsimile of the harsh lunar environment hinders progress in dust-tolerant technologies. To address this challenge, NASA Langley Research Center is creating an extreme environment testbed. This reconfigurable testbed will allow rapid, repeatable wear testing of material and candidate mechanisms under vacuum conditions, facilitating the development of critical materials technologies for lunar exploration. Preliminary results from exposing an actuating mechanism similar to a pin joint to lunar regolith simulant under high vacuum are reported.

lunar dust↗
NASA NTRSDate not supplied

Testbed for Lunar Extreme Environment Wear Tolerant Applications

The abrasive dust from lunar regolith poses significant long-term durability and performance challenges to materials, vehicles, mechanisms and structures that will be used for the next generation of lunar exploration. The development of advanced materials, coatings and device technologies that can withstand these abrasive particles and extreme environmental conditions is critical. However, the lack of standardized and accessible methods for evaluating such materials and devices in a facsimile of the harsh lunar environment hinders progress in dust-tolerant technologies. To address this challenge, NASA Langley Research Center is creating an extreme environment testbed. This reconfigurable testbed will allow rapid, repeatable wear testing of material and candidate mechanisms under vacuum conditions, facilitating the development of critical materials technologies for lunar exploration. Preliminary results from exposing an actuating mechanism similar to a pin joint to lunar regolith simulant under high vacuum are reported.

lunar dust↗
NASA NTRS2024

Lunar Soil Enrichment for Plant Production: WILD (Waste Improved Lunar Dirt)

To identify a process to generate a fertile soil for plant growth using lunar regolith and waste compost, several qualitative and quantitative investigations were performed. The primary focus of this project was to demonstrate the feasibility of microbe bioleaching to extract inorganic plant nutrients (P and K) from lunar regolith simulant. This was achieved by developing a screening test method to identify microbial candidates that would effectively bioleach P and K from JSC-1A. Quantitative bioleaching test using the downselected microbes (Pantoea Agglomerans (P. agglo) and a plant-relevant consortium) were then performed. The second focus of the project was to validate the approach of waste compost utilization to improve water retention and fertility of lunar regolith for food production. This was achieved by measuring the water retention property of the mixture of compost and regolith at different ratio and conducting microgreen growth experiments with compost/regolith mixtures. The team also discovered from this study that some native microbes associated with JSC-1A can form biofilm containing JSC-1A particles (a type of soil crust), which showed potential as an ISRU geomicrobiological dust mitigation method for Lunar or Martian applications.

Ray Pitts↗
NASA NTRS2010

Extracting Oxygen from Lunar Simulant Using a Transparent Furnace Pulsed Fluidized Bed

In the event that humans return to the moon, utilizing the local materials will be beneficial for extended stays. Rather than transporting resources, such as oxygen, from Earth, NASA is investigating methods of extracting it from lunar regolith. One promising process is hydrogen reduction. In the hydrogen reduction process, lunar regolith is heated to 1000 C in the presence of hydrogen. The iron oxide (Fe-O) bonds, found in lunar material, are broken and the hydrogen attracts the oxygen to produce water vapor [Allen et al., 1996]. FeO + H2 (right arrow) Fe +H2O. The water vapor is then captured, cleaned, and electrolyzed. The hydrogen is recycled back to the reduction process and the oxygen is stored until consumed by an end user (propulsion, life support, etc.). To obtain a good oxygen yield, the majority of lunar regolith must be exposed to the hydrogen gas and have a high rate of heat transfer from heat source to particle. This is achieved with good solids mixing via fluidization or mechanical agitation. In Generation II of the ROxygen program, the ROxygen Team at Johnson Space Center (JSC) investigated the feasibility of gas only pulsed fluidization as the only means to mix synthetic lunar regolith (simulant) at high temperatures. Fluidized beds have been used in industry to effectively process powders for decades. They consist of gas flowing upward through a bed of particles. The stirring action continuously moves the grains around to achieve uniform mixing of gas, solids, and heat [Geldart, 1986]. A transparent furnace unit was developed by Thoughventions Unlimited LLC (TvU) to aid in the qualitative observation of the fluidization behavior at high temperatures. Multipoint thermocouples and pressure sensors provided quantitative information regarding the quality of mixing. The water produced was measured using humidity sensors and captured using a NASA designed and built condenser. Once the simulant was processed, pneumatically transporting the 'hot' simulant out of the furnace was investigated.

Oryshchyn, L.↗
NASA NTRS2024

Investigation of Lunar Regolith Reduction via Hydrogen Plasma in Different Plasma Environments

The team at NASA KSC explored the use of hydrogen plasma as a reducing agent for Lunar regolith simulant in order to prove the viability of oxygen extraction from oxides. The focus of this work was to investigate the hydrogen ion production of different plasma power sources. An optimization trade study was completed by maximizing the production of the hydrogen ion and comparing the amount produced to the energy consumed. Hydrogen ion production was determined via residual gas analysis and a rough calibration using injected water. The hydrogen ions reduce the oxides present in the Lunar regolith, forming an OH molecule, which can further react with the hydrogen environment to form water vapor. This water vapor can then be measured through a residual gas analysis. Through this study, it was found that a direct current (DC) glow discharge operating at approximately 1 torr in a hydrogen environment produced the largest amount of reduced regolith when compared with a nanosecond pulsed system and alternating current (AC) source. Radiofrequency devices beyond AC were not studied in this work. Although the DC source performed the best here, limitations in design and experiment setup/scalability may lead to the selection of an alternative plasma power source in the future.

Kenneth Engeling↗
NASA NTRS2013

PowderSim: Lagrangian Discrete and Mesh-Free Continuum Simulation Code for Cohesive Soils

PowderSim is a calculation tool that combines a discrete-element method (DEM) module, including calibrated interparticle-interaction relationships, with a mesh-free, continuum, SPH (smoothed-particle hydrodynamics) based module that utilizes enhanced, calibrated, constitutive models capable of mimicking both large deformations and the flow behavior of regolith simulants and lunar regolith under conditions anticipated during in situ resource utilization (ISRU) operations. The major innovation introduced in PowderSim is to use a mesh-free method (SPH-based) with a calibrated and slightly modified critical-state soil mechanics constitutive model to extend the ability of the simulation tool to also address full-scale engineering systems in the continuum sense. The PowderSim software maintains the ability to address particle-scale problems, like size segregation, in selected regions with a traditional DEM module, which has improved contact physics and electrostatic interaction models.

Johnson, Scott↗
NASA NTRS2012

Kinetic and Potential Sputtering Enhancements of Lunar Regolith Erosion: The Contribution of the Heavy Multicharged (Minority) Solar Wind Constituents

We report preliminary results for H+, Ar+1, Ar+6 and Ar+9 ion sputtering of JSC-1A lunar regolith simulant at solar wind velocities, obtain ed at the ORNL Multicharged Ion Research Facility using quadrupole ma ss spectrometry. The multi-charged Ar ions were used as proxies for i ntermediate mass solar wind multicharged ions. Prior to the Ar beam e xposures, the sample was exposed to high fluence H+ irradiation to si mulate H-loading due to the dominant solar wind constituent. A x80 en hancement of oxygen sputtering by Ar+ over same velocity H+ was measu red and an additional x2 increase for Ar+9 over same velocity Ar+ was demonstrated, giving clear evidence of the importance of potential s puttering by multicharged ions. This enhancement was observed to pers ist to the maximum fluences investigated (approx 10(exp 16)/sq cm). As discussed in a companion abstract by N. Barghouty, such persistent s puttering enhancement has significant implications on weathering and aging of lunar regolith. In addition, XPS measurements showed strong evidence of Fe reduction for those target areas that had been exposed to high fluence Ar+ and Ar+8 beams. Preferential oxidation of the Fe -reduced beam-exposed regions during transfer to the XPS system led t o enhanced O concentrations in those regions as well. On the basis of these very promising preliminary results, a NASA-LASER project on mo re extensive measurements was recently selected for funding. The prop osal expands the collaboration with NASA-MSFC for the simulation effort, and adds a new collaboration with NASA-GSFC for lunar mission-rele vant measurements.

Meyer, F. W.↗
NASA NTRS1989

Life support systems research at the Johnson Space Center

The bioregenerative life support systems research at Johnson Space Center focuses on the use of lunar regolith as a plant growth medium. Current dissolution experiments are being conducted to ascertain the response of lunar regolith to various solvents and weathering environments. The transformation of lunar minerals into minerals such as zeolites which would be more conducive to plant growth is also investigated. A study is currently underway to examine the ability of zeolite/apatite mixtures to provide N, P, and K through dissolution and ion exchange. The development and characterization of simulated lunar regolith for preliminary experimentation are also discussed. The life support systems technology used on the Mercury, Gemini, Apollo, and Shuttle missions is reviewed and current research on regenerative life support systems technology for potential use in Space Station Freedom is discussed.

Henninger, D. L.↗
NASA NTRSDate not supplied

Design of Electrostatic Dust Lofting Suborbital Flight Experiment Examining Photoionization under Lunar Gravity

Dust on the lunar surface electrostatically charges due to the plasma environment surrounding the Moon, causing grains to become lofted and adhere to nearby surfaces including landers and astronauts. Studying the behaviors of these charged particles in the lunar environment is essential to plan around the deleterious effects of dust to future Moon missions. Models attempt to predict the amount of dust loading that can be expected in many of these scenarios, but they require experimental validation to be predictive. This physics cannot be fully studied on Earth due to the six times larger gravitational force obscuring the electrostatic interactions, so it is necessary to run experiments in a more relevant environment, including vacuum and near-lunar gravitational effects. An experiment has been designed to fly on the Lunar Gravity Acceleration (LGA) mission aboard the Blue Origin New Shepard suborbital rocket. This experiment will perform photoionization charging of lunar regolith simulant grains under the illumination of an ultraviolet (UV) source. As a result, the charged grains will then electrostatically repel one another and loft in the reduced gravity environment; their trajectories will be imaged via a high-speed camera. Preliminary laboratory results influencing the design of this experiment will be presented, including characterization of several UV sources, measurements of photoionization currents under various vacuum conditions, and examination of lunar simulant dust lofting under terrestrial gravity. Results from this flight will be compared with ground-based testing and the laboratory results outlined above to examine the dependence on gravity and will be fed into the dust charging and lofting models currently under development.

electrostatics↗
NASA NTRS2009

Performance of "Waterless Concrete"

Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in a lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and, by oxidation of the soil, iron and sulfur can be produced. Sulfur concrete specimens were cycled between liquid nitrogen (approx.]91 C) and room temperature (^21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (^21 C) and ^-101 C. Test results showed that due to temperature cycling, the compressive strength of cycled specimens was 20% of those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibres. The lunar regolith simulant was melted in a 25 cc Pt- Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to i hour. Glass fibres and small rods were pulled from the melt. The glass fibres were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Beams strengthened with glass fibres showed to exhibit an increase in the flexural strength by as much as 45%.

Toutanji, H. A.↗
NASA NTRS2024

Wear and Neutron Shielding Resilience of Titanium-Hexagonal Boron Nitride Coatings Against Extreme Lunar Radiation and Thermal Cycles

Ti6Al4V and Al6061 are aerospace alloys used in lunar structural components and rovers owing to their high specific strength. However, they deteriorate rapidly when subjected to demanding conditions of the lunar environment, such as extreme thermal cycles, solar particle radiation, and abrasive regolith. Cryo-milled powders were employed to deposit hBN-reinforced protective titanium coatings through plasma spray (atmospheric APS and vacuum-VPS) with 2 and 10 vol% of hBN on Ti6Al4V and Al6061 substrates. These coatings were evaluated for durability under extreme lunar-like conditions, including thermal cycling, electron radiation, and synergistic (electron radiation-thermal cycle) exposure. The coatings exhibited radiation-induced hardening, resulting in a substantial increase in their microhardness ~20–40% compared to virgin condition. Bright-field transmission electron microscopy (TEM) analysis reveals the presence of high dislocation densities, black dot defects, and dislocation clusters, providing evidence of the severe impact of synergistic environmental stresses. Ball-on-disk tribological tests were conducted in the presence of JSC-1 A lunar regolith simulant to evaluate the wear performance of coatings. Compared to conventional Ti6Al4V substrate, 50%, 90%, and 70% reductions in wear volume were observed in the Ti/2 vol% hBN coatings in thermal-only, radiation-only, and synergistic environments. Neutron shielding tests indicate that the synergistic coatings offer higher neutron shielding performance by up to 28% compared to virgin coatings, attributed to improved neutron capture by 10B isotopes. Upon a comprehensive assessment and ranking of multiple coatings under varying conditions, the VPS Ti/2 vol% hBN coating emerges as the top choice for protection against extreme radiation and thermal cycles for future lunar explorations.

Boron nitride↗
NASA NTRS2008

Mechanical Properties and Durability of "Waterless Concrete"

Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to exhibit an increase in the flexura strength by as much as 45%.

Toutanji, Houssam↗