Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAL CRYSTAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Growth and Characterization of Arsenic-Doped CdTe 1-x Se x Single Crystals Grown by the Cd-Solvent Traveling Heater Method

The photovoltaic performance of CdTe solar cells is mainly limited by low doping and short minority carrier lifetime. Group-V element doping and Se-alloying have a significant impact on tuning these fundamental CdTe properties. In this paper, we report the growth of p-type As-doped, Cd-rich CdTe 1-x Se x single crystals using metallic Cd as the solvent in the traveling-heater method. The structural and electrical properties of CdTe1-xSex are examined for different Se concentrations. CdTe 1-x Se x single crystals (0 ≤ x ≤ 0.5) with zincblende structure indicate homogeneous composition. The 10 17 cm-3 As-doping activation efficiency can be maintained at close to 50% for x ≤ 0.2. Se alloying leads to bulk minority carrier lifetime exceeding 30 ns for samples doped near 1017 cm -3 . These results help us to overcome the current roadblocks in device performance.

14 SOLAR ENERGY↗
DOE OSTI2020

Universal mechanical exfoliation of large-area 2D crystals

Two-dimensional materials provide extraordinary opportunities for exploring phenomena arising in atomically thin crystals. Beginning with the first isolation of graphene, mechanical exfoliation has been a key to provide high-quality two-dimensional materials, but despite improvements it is still limited in yield, lateral size and contamination. Here we introduce a contamination-free, one-step and universal Au-assisted mechanical exfoliation method and demonstrate its effectiveness by isolating 40 types of single-crystalline monolayers, including elemental two-dimensional crystals, metal-dichalcogenides, magnets and superconductors. Most of them are of millimeter-size and high-quality, as shown by transfer-free measurements of electron microscopy, photo spectroscopies and electrical transport. Large suspended two-dimensional crystals and heterojunctions were also prepared with high-yield. Enhanced adhesion between the crystals and the substrates enables such efficient exfoliation, for which we identify a gold-assisted exfoliation method that underpins a universal route for producing large-area monolayers and thus supports studies of fundamental properties and potential application of two-dimensional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamical defects in a two-dimensional Wigner crystal: Self-doping and kinetic magnetism

We study the quantum dynamics of interstitials and vacancies in a two-dimensional Wigner crystal (WC) using a semi-classical instanton method that is asymptotically exact at low density, i.e., in the r s → ∞ limit. Here, the dynamics of these point defects mediates magnetism with much higher energy scales than the exchange energies of the pure WC. Via exact diagonalization of the derived effective Hamiltonians in the single-defect sectors, we find the dynamical corrections to the defect energies. The resulting expression for the interstitial (vacancy) energy extrapolates to 0 at r s = r mit ≈ 70 (r s ≈ 30), suggestive of a self-doping instability to a partially melted WC for some range of r s below r mit . We thus propose a “metallic electron crystal” phase of the two-dimensional electron gas at intermediate densities between a low density insulating WC and a high density Fermi fluid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Structure and function of aerotolerant, multiple-turnover THI4 thiazole synthases

Plant and fungal THI4 thiazole synthases produce the thiamin thiazole moiety in aerobic conditions via a single-turnover suicide reaction that uses an active-site Cys residue as sulfur donor. Multiple-turnover (i.e. catalytic) THI4s lacking an active-site Cys (non-Cys THI4s) that use sulfide as sulfur donor have been biochemically characterized -- but only from archaeal methanogens that are anaerobic, O 2 -sensitive hyperthermophiles from sulfide-rich habitats. These THI4s prefer iron as cofactor. A survey of prokaryote genomes uncovered non-Cys THI4s in aerobic mesophiles from sulfide-poor habitats, suggesting that multiple-turnover THI4 operation is possible in aerobic, mild, low-sulfide conditions. This was confirmed by testing 23 representative non-Cys THI4s for complementation of an Escherichia coli ΔthiG thiazole auxotroph in aerobic conditions. Sixteen were clearly active, and more so when intracellular sulfide level was raised by supplying Cys, demonstrating catalytic function in the presence of O 2 at mild temperatures and indicating use of sulfide or a sulfide metabolite as sulfur donor. Comparative genomic evidence linked non-Cys THI4s with proteins from families that bind, transport, or metabolize cobalt or other heavy metals. The crystal structure of the aerotolerant bacterial Thermovibrio ammonificans THI4 was determined to probe the molecular basis of aerotolerance. The structure suggested no large deviations compared with the structures of THI4s from O 2 -sensitive methanogens, but is consistent with an alternative catalytic metal. Together with complementation data, use of cobalt rather than iron was supported. We conclude that catalytic THI4s can indeed operate aerobically and that the metal cofactor inserted is a likely natural determinant of aerotolerance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Epitaxial Electrodeposition of Wide Bandgap Semiconductors for Energy Conversion and Storage

The focus of this project was to electrodeposit epitaxial films and nanostructures of inorganic materials. Although electrodeposition is normally associated with the electroplating of metals, the emphasis in this work was the deposition of compound materials such as metal oxides, semiconductors, catalysts, and magnetic materials. An electrochemical/chemical approach was used, in which an electrochemical redox reaction was followed by a chemical reaction to produce the product. The materials were deposited as epitaxial thin films or nanostructures onto a single-crystal substrate that determined their in-plane and out-of-plane orientation. Epitaxial films can have enhanced properties due to the lack of grain boundaries. They can also produce catalytic materials which have enhanced reactivity due to the exposure of the most catalytically active surface. A method was developed to produce inexpensive single-crystal-like metal foils that could be used as the substrate to deposit materials for applications such as flexible electronics. It was also demonstrated that epitaxial films of inorganic materials could be produced by a simple spin-coating technique.

36 MATERIALS SCIENCE↗
NASA NTRS1945

Table of interplanar spacings for crystal-structure determinations by X-ray diffraction with molybdenum, copper, cobalt, iron, and chromium radiations

For a simple diffraction pattern, the time required to calculate interplanar distances from measurements of the pattern is not excessive. If more than a few lines are present, however, or if several patterns are to be studied, it is very advantageous to have available a table giving interplanar spacings directly in terms of the linear measurements made on the film of the lines appearing on the diffraction pattern. The preparation of the table given here was undertaken when the expansion of research activities involving X-ray diffraction techniques indicated that such a table would greatly decrease the time required to analyze diffraction patterns. The table was prepared for use with K alpha(sub 1) radiation from the following target materials: molybdenum, copper, cobalt, iron, and chromium.

METALS - STRUCTURES↗
NASA NTRSDate not supplied

Uncertainty Reduction With Multi-Model Monte Carlo for Crystal Plasticity Simulations of Additively Manufactured Metals

In this work, multi-model Monte Carlo estimators are developed to reduce uncertainty in quantities of interest (QoIs) extracted from crystal plasticity simulations of additively manufactured (AM) metals. A significant concern in AM parts is uncertainty in mechanical properties caused in part by complex microstructures that arise from the AM process. Quantifying uncertainty in microstructure-sensitive behavior using experiments alone is costly, especially when mechanical allowables must be established. Quantitative relationships among microstructure, micromechanical metrics like slip accumulation, crack initiation, and failure are also difficult to capture with limited experiments. Crystal plasticity material models instead enable computational prediction of micromechanical stress and strain fields given a discretized microstructure. However, high-fidelity finely discretized crystal plasticity simulations are computationally expensive, while lower-fidelity models are less accurate and generally biased, making uncertainty quantification and reduction computationally difficult as well. Multi-model Monte Carlo methods leverage correlations between high- and low-fidelity models to produce unbiased estimators for QoIs with reduced uncertainty relative to standard Monte Carlo. Crystal plasticity QoIs considered in this work include yield strength and the mean and extreme values of micromechanical fields that are relevant to crack initiation. Multi-model Monte Carlo estimators are developed for each individual QoI and several groups of QoIs. The results of this work establish relationships among model correlations, sample allocation, and uncertainty reduction for different combinations of QoIs and demonstrate a trend of less uncertainty reduction as QoIs become more sensitive to local microstructure. Limitations from using pilot samples to estimate model covariances and train low-fidelity models are also addressed. The uncertainty reduction achieved by multi-model Monte Carlo is an important step toward using computational mechanics models to predict microstructure-sensitive crack initiation and failure in AM parts.

uncertainty quantification↗
DOE OSTI2023

Existence of La-site antisite defects in LaMO 3 (M = Mn, Fe, and Co) predicted with many-body diffusion quantum Monte Carlo

The properties of LaMO 3 (M: 3d transition metal) perovskite crystals are significantly dependent on point defects, whether introduced accidentally or intentionally. The most studied defects in La-based perovskites are the oxygen vacancies and doping impurities on the La and M sites. Here, we identify that intrinsic antisite defects, the replacement of La by the transition metal, M, can be formed under M-rich and O-poor growth conditions, based on results of an accurate many-body ab initio approach. Our fixed-node diffusion Monte Carlo (FNDMC) calculations of LaMO 3 (M = Mn, Fe, and Co) find that such antisite defects can have low formation energies and are magnetized. Complementary density functional theory (DFT)-based calculations show that Mn antisite defects in LaMnO 3 may cause the p-type electronic conductivity. These features could affect spintronics, redox catalysis, and other broad applications. Our bulk validation studies establish that FNDMC reproduces the antiferromagnetic state of LaMnO 3 , whereas DFT with PBE (Perdew–Burke–Ernzerhof), SCAN (strongly constrained and appropriately normed), and the LDA+U (local density approximation with Coulomb U) functionals all favor ferromagnetic states, at variance with experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Adsorbate-induced adatom formation on Au-Cu bimetallic alloys and its possible consequences for CO 2 electroreduction

The adsorbate-induced formation of sub-nanometer clusters on transition-metal single crystals observed in previous high-pressure microscopic studies hinted at the in-situ formation of unique active sites even on large nanoparticle catalysts. We propose that the adatom formation energy can be used as an energetic descriptor for the initial step toward the adsorbate-induced metal-cluster formation process. This descriptor can be efficiently computed using density functional theory (DFT) calculations and applied for screening and identification of metal catalysts where this phenomenon may play an important role in generating active sites in-situ. As a proof of concept, here, we construct an adatom formation energy database for three Au x Cu y alloys (x:y = 3:1, 1:1, or 1:3) and eighteen adsorbates (H, C, N, O, F, S, Cl, Br, I, CH x , NH x (x = 1 – 3), CO, NO, and OH) commonly involved in catalytic reactions. The energetics of adatom formation were examined in all cases where the (111) terrace, (211) step-edge, and (874) kink were the sources of the adatom. We demonstrate that the presence of an adsorbate could alter not only the energetics for adatom formation but also the elemental nature of the preferred adatom being formed. Using our database, we identified promising systems which favor adsorbate-induced adatom formation under near-ambient conditions. Specifically, CO-induced adatom formation on all three Au-Cu alloy surfaces could occur under CO 2 electroreduction (CO 2 RR) conditions. This phenomenon offers a qualitative explanation for the experimentally observed CO 2 RR activity on Au-Cu alloy catalysts. As a result, our methodology offers an easily expandable and efficient approach for large-scale catalyst screening with regards to adatom/cluster formation under reaction conditions and provides insight into the possible nature of active sites on alloy catalysts from a novel perspective.

Active site↗
NASA NTRS1987

Microgravity materials processing for commercial applications

An evaluation is made of the development status of materials processing techniques in microgravity environments; the classes of materials treated to date encompass glasses, ceramics, crystals, semiconductors, metals and their alloys, polymers, composites, and such biological substances as pharmaceuticals. Attention is given to the commercial development of composite and mixed-phase materials with substantially improved properties as a result of microgravity processing, as well as to current research into catalysts and Type II-VI semiconductor crystals such as CdTe.

Kohli, R.↗
DOE OSTI2021

Rotational Dynamics of an Amphidynamic Zirconium Metal–Organic Framework Determined by Dielectric Spectroscopy

A zirconium metal–organic framework with a difluorophenylene rotator bearing a permanent electric dipole of ~3.2 D was synthesized, and its rotational motion was analyzed by temperature- and frequency-dependent broadband dielectric spectroscopy. While solid-state NMR confirms fast rotation qualitatively, the dissipation factors measured between 113 and 153 K suggested an activation energy E a = 2.6 kcal/mol, but deviations from a single Debye relaxation suggested a dynamic process that cannot be accounted for by a well-defined potential with a single activation barrier. The dynamic heterogeneity of the dipolar rotor was confirmed by analysis in terms of a Cole–Cole relaxation, which suggested a mean barrier of ~1.9 kcal/mol, with a heterogeneity that decreases as temperature increases. Based on the single-crystal structure, we propose that the kinetic heterogeneity results from a temperature-dependent potential where rotation motion is mediated by the escape of the rotator from an energy well created by a double Ph–H···F–Ph hydrogen bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthetic Control of Water-Stable Hybrid Perovskitoid Semiconductors

Hybrid metal-halide perovskites and their derived materials have emerged as the next-generation semiconductors with a wide range of applications, including photovoltaics, light-emitting devices, and other optoelectronics. Over the past decade, numerous single-crystalline perovskite derivatives have been synthesized and developed. However, the synthetic methods for these derivatives mainly rely on acidic crystallization conditions. This approach leads to crystals comprising metal halide building blocks, which show problematic stability when directly exposed to water. In this study, a methodology is developed for synthesizing hybrid metal-halide compounds using lead iodide and the zwitterionic bifunctional molecule cysteamine (CYS), to form various perovskitoid structures under a broad pH range. Interestingly, the different pH conditions alter the coordination environment of lead halides, leading to lead-sulfide and lead-nitride covalent bond formation. This modification significantly enhances their stability when in direct contact with water, lasting for months. Photoluminescence measurements and first principal density functional theory (DFT) calculations reveal that the perovskitoids synthesized under basic and acidic pH conditions exhibit a direct bandgap nature, while those synthesized under neutral conditions display an indirect bandgap. This approach opens new avenues for manipulating synthetic methods to develop water-stable hybrid semiconductors suitable for a wide range of applications, such as solid-state light emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spectrally sharp magnetic excitations above the critical temperature in a frustrated Weyl semimetal

The rare-earth α-pyrochlore iridates are a prospective class of conducting frustrated magnets where electronic correlations, large spin-orbit coupling, and geometrical frustration interplay, leading to a rich set of magnetic and electronic phases. Despite their intriguing properties, the magnetic order and excitations in this fundamental class of topological quantum materials remain poorly understood due to challenges in growing large single crystals and insufficient microscopic information on their temperature-dependent phases. Here, by combining state-of-the-art thin-film synthesis, resonant elastic and inelastic X-ray scattering, spin wave analysis, and dynamical spin susceptibility calculations, we unequivocally reveal the presence of spectrally sharp, gapped magnetic excitations in Y 2 Ir 2 O 7 that surprisingly persist well above the Néel transition temperature, signaling the presence of a quasi-universal regime connected to fluctuations on frustrated lattices. This finding implies the existence of a highly unusual cooperative paramagnetic (CP) phase above the ordering temperature and offers an explanation for the puzzling high-temperature magnetic behavior observed across the family of metallic pyrochlore crystals. Understanding such magnetic excitations at technologically relevant temperatures opens up possibilities for novel topological spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metallic surface doping of metal halide perovskites

Abstract Intentional doping is the core of semiconductor technologies to tune electrical and optical properties of semiconductors for electronic devices, however, it has shown to be a grand challenge for halide perovskites. Here, we show that some metal ions, such as silver, strontium, cerium ions, which exist in the precursors of halide perovskites as impurities, can n-dope the surface of perovskites from being intrinsic to metallic. The low solubility of these ions in halide perovskite crystals excludes the metal impurities to perovskite surfaces, leaving the interior of perovskite crystals intrinsic. Computation shows these metal ions introduce many electronic states close to the conduction band minimum of perovskites and induce n-doping, which is in striking contrast to passivating ions such as potassium and rubidium ion. The discovery of metallic surface doping of perovskites enables new device and material designs that combine the intrinsic interior and heavily doped surface of perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

Friction and wear behavior of single-crystal silicon carbide in sliding contact with various metals

Sliding friction experiments were conducted with single-crystal silicon carbide in contact with various metals. Results indicate the coefficient of friction is related to the relative chemical activity of the metals. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to silicon carbide. The chemical activity of the metal and its shear modulus may play important roles in metal transfer, the form of the wear debris and the surface roughness of the metal wear scar. The more active the metal, and the less resistance to shear, the greater the transfer to silicon carbide and the rougher the wear scar on the surface of the metal. Hexagon shaped cracking and fracturing formed by cleavage of both prismatic and basal planes is observed on the silicon carbide surface.

Miyoshi, K.↗
NASA NTRS1978

Friction and wear behavior of single-crystal silicon carbide in sliding contact with various metals

Sliding friction experiments were conducted with single-crystal silicon carbide in contact with various metals. Results indicate the coefficient of friction is related to the relative chemical activity of the metals. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to silicon carbide. The chemical activity of the metal and its shear modulus may play important roles in metal-transfer, the form of the wear debris and the surface roughness of the metal wear scar. The more active the metal, and the less resistance to shear, the greater the transfer to silicon carbide and the rougher the wear scar on the surface of the metal. Hexagon-shaped cracking and fracturing formed by cleavage of both prismatic and basal planes is observed on the silicon carbide surface.

Miyoshi, K.↗