Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCHROMATIC RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Diamond X-ray photodiode for white and monochromatic SR beams

High-purity, single-crystal CVD diamond plates are screened for quality and instrumented into a sensor assembly for quantitative characterization of flux and position sensitivity. Initial investigations have yielded encouraging results and have led to further development. Several limiting complications are observed and discussed, as well as mitigations thereof. For example, diamond quality requirements for X-ray diodes include low nitrogen impurity and crystallographic defectivity. Thin electrode windows and electronic readout performance are ultimately also critical to device performance. Promising features observed so far from prototype devices include calculable responsivity, flux linearity, position sensitivity and timing performance. Recent results from testing in high-flux and high-speed applications are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sensitizers containing donor cascade and rhodanine-3-acetic acid moieties for dye-sensitized solar cells

Three organic dyes with D-{pi}-D-{pi}-A structure based on triarylamine, dimethylarylamine, and rhodanine-3-acetic acid moieties are designed and synthesized. Incorporating thiophene moieties into the system affords sensitizers with high molar extinction coefficients. These dyes were applied into nanocrystalline TiO{sub 2} dye-sensitized solar cells through standard operations. For a typical device the maximal monochromatic incident photon-to-current conversion efficiency (IPCE) can reach 73%, with a short-circuit photocurrent density (J{sub sc}) of 7.3 mA/cm{sup 2}, an open-circuit voltage (V{sub oc}) of 636 mV, and a fill factor (ff) of 0.61, corresponding to an overall conversion efficiency ({eta}) of 2.86%. (author)

14 SOLAR ENERGY↗

Monochromatic x-ray sampling streak imager for fast-ignitor plasma observation

Ultrafast two-dimensional (2D) x-ray imaging is required to investigate the dynamics of fast-heated core plasma in inertial confinement fusion research. A novel x-ray imager, consisting of two toroidally bent Bragg crystals and an ultrafast 2D x-ray imaging camera, has been demonstrated. Sequential and 2D monochromatic x-ray images of laser-imploded core plasma were obtained with a temporal resolution of 20 ps, a spatial resolution of 31 {mu}m, and a spectral resolution of over 200, simultaneously.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Density measurement of shock compressed foam using two-dimensional x-ray radiography

We have used spherically bent quartz crystal to image a laser-generated shock in a foam medium. The foam targets had a density of 0.16 g/cm{sup 3} and thickness of 150 {mu}m, an aluminum/copper pusher drove the shock. The experiment was performed at the Titan facility at Lawrence Livermore National Laboratory using a 2 ns, 250 J laser pulse to compress the foam target, and a short pulse (10 ps, 350 J) to generate a bright Ti K{alpha} x-ray source at 4.5 keV to radiograph the shocked target. The crystal used gives a high resolution ({approx}20 {mu}m) monochromatic image of the shock compressed foam.

36 MATERIALS SCIENCE↗

Phase contrast imaging simulation and measurements using polychromatic sources with small source-object distances

Phase contrast imaging is a technique widely used in synchrotron facilities for nondestructive analysis. Such technique can also be implemented through microfocus x-ray tube systems. Recently, a relatively new type of compact, quasimonochromatic x-ray sources based on Compton backscattering has been proposed for phase contrast imaging applications. In order to plan a phase contrast imaging system setup, to evaluate the system performance and to choose the experimental parameters that optimize the image quality, it is important to have reliable software for phase contrast imaging simulation. Several software tools have been developed and tested against experimental measurements at synchrotron facilities devoted to phase contrast imaging. However, many approximations that are valid in such conditions (e.g., large source-object distance, small transverse size of the object, plane wave approximation, monochromatic beam, and Gaussian-shaped source focal spot) are not generally suitable for x-ray tubes and other compact systems. In this work we describe a general method for the simulation of phase contrast imaging using polychromatic sources based on a spherical wave description of the beam and on a double-Gaussian model of the source focal spot, we discuss the validity of some possible approximations, and we test the simulations against experimental measurements using a microfocus x-ray tube on three types of polymers (nylon, poly-ethylene-terephthalate, and poly-methyl-methacrylate) at varying source-object distance. It will be shown that, as long as all experimental conditions are described accurately in the simulations, the described method yields results that are in good agreement with experimental measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Reaction of Dissociative Recombination in a Strong Light Field

The DR theory of slow electrons with molecular ions in strong monochromatic light field is developed. The potential energy curves of the oxygen molecule O{sub 2}** dissociative states are calculated. Classification of all possible transitions and reaction mechanisms are presented.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photon-exposure-dependent photon-stimulated desorption for obtaining photolysis cross section of molecules adsorbed on surface by monochromatic soft x-ray photons

Photon-exposure-dependent positive- and negative-ion photon-stimulated desorption (PSD) was proposed to study the photoreactions and obtain the photolysis cross sections of molecules adsorbed on a single-crystal surface by monochromatic soft x-ray photons with energy near the core level of adsorbate. The changes in the F{sup +} and F{sup -} PSD ion yields were measured from CF{sub 3}Cl molecules adsorbed on Si(111)-7x7 at 30 K (CF{sub 3}Cl dose=0.3x10{sup 15} molecules/cm{sup 2}, {approx}0.75 monolayer) during irradiation of monochromatic soft x-ray photons near the F(1s) edge. The PSD ion yield data show the following characteristics: (a) The dissociation of adsorbed CF{sub 3}Cl molecules is due to a combination of direct photodissociation via excitation of F(1s) core level and substrate-mediated dissociation [dissociative attachment and dipolar dissociation induced by the photoelectrons emitting from the silicon substrate]. (b) the F{sup +} ion desorption is associated with the bond breaking of the surface CF{sub 3}Cl, CF{sub 2}Cl, CFCl, and SiF species. (c) the F{sup -} yield is mainly due to DA and DD of the adsorbed CF{sub 3}Cl molecules. (d) The surface SiF is formed by reaction of the surface Si atom with the neutral fluorine atom, F{sup +}, or F{sup -} ion produced by scission of C-F bond of CF{sub 3}Cl, CF{sub 2}Cl, or CFCl species. A kinetic model was proposed for the explanation of the photolysis of this submonolayer CF{sub 3}Cl-covered surface. Based on this model and the variation rates of the F{sup +}/F{sup -} signals during fixed-energy monochromatic photon bombardment at 690.2 and 692.6 eV[near the F(1s) edge], the photolysis cross section was deduced as a function of energy.

36 MATERIALS SCIENCE↗

Development of a Source of Quasi-Monochromatic MeV Energy Photons

We report current progress on a project to develop an all-optically-driven x-ray photon source. A laser pulse with 40-50 TW of peak power is focused on a supersonic helium nozzle to drive a relativistic plasma wave. Electron beams with energies of 320 MeV (+/-28 MeV) are accelerated by means of laser wakefield acceleration. Remarkably, the acceleration region is only 3 mm in length. This accelerator is currently being employed to demonstrate the generation of MeV-energy x-ray by means of all-optical Thomson scattering. By this mechanism, a lower power, laser pulse (from the same laser system) is focused onto the above laser-driven electron beam, 1-eV energy photons are Doppler-shifted in energy to >1 MeV.

43 PARTICLE ACCELERATORS↗

The design and application of an in-laboratory diffraction-enhanced x-ray imaging instrument

We describe the design and application of a new in-laboratory diffraction-enhanced x-ray imaging (DEXI) instrument that uses a nonsynchrotron, conventional x-ray source to image the internal structure of an object. In the work presented here, a human cadaveric thumb is used as a test-sample to demonstrate the imaging capability of our instrument. A 22 keV monochromatic x-ray beam is prepared using a mismatched, two-crystal monochromator; a silicon analyzer crystal is placed in a parallel crystal geometry with the monochromator allowing both diffraction-enhanced imaging and multiple-imaging radiography to be performed. The DEXI instrument was found to have an experimentally determined spatial resolution of 160{+-}7 {mu}m in the horizontal direction and 153{+-}7 {mu}m in the vertical direction. As applied to biomedical imaging, the DEXI instrument can detect soft tissues, such as tendons and other connective tissues, that are normally difficult or impossible to image via conventional x-ray techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Alfven wave filamentation and dispersive phase mixing

The formation of three-dimensional magnetic structures from quasi-monochromatic left-hand polarized dispersive Alfven waves, under the effect of transverse collapse and/or the lensing effect of density channels aligned with the ambient magnetic field is discussed, both in the context of the usual Hall-MHD and using a fluid model retaining linear Landau damping and finite Larmor radius corrections. It is in particular shown that in a small-{beta} plasma (that is stable relatively to the filamentation instability in the absence of inhomogeneities), a moderate density enhancement leads the wave energy to concentrate into a filament whose transverse size is prescribed by the dimension of the channel, while for a strong density perturbation, this structure later on evolves to thin helical ribbons where the strong gradients permit dissipation processes to become efficient and heat the plasma. The outcome of this 'dispersive phase mixing' that leads to small-scale formation on relatively extended regions contrasts with the more localized oblique shocks formed in the absence of dispersion. Preliminary results on the effect of weak collisions that lead to an increase of the transverse ion temperature are also briefly mentioned.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of the ''clean-up'' of the oxidized Ge(100) surface by atomic layer deposition

While the 'clean-up' effect on III-V substrates has recently been well documented interfacial reactions during atomic layer deposition (ALD) on Ge substrates are not fully explored. The 'clean-up' of Ge oxides is studied by interrupting the ALD process following individual precursor pulses for in situ monochromatic x-ray photoelectron spectroscopy analysis. Germanium oxides are found to be reduced by TMA and water, while an interfacial GeON layer is only affected by the initial TMA pulse. Oxide free germanium surfaces behave analogously to a surface with initial native oxides since they are oxidized measurably prior to the first TMA pulse due to residual oxidants in a commercial ALD chamber.

36 MATERIALS SCIENCE↗

Asymmetrically cut crystal pair as x-ray magnifier for imaging at high intensity laser facilities

The potential of an x-ray magnifier prepared from a pair of asymmetrically cut crystals is studied to explore high energy x-ray imaging capabilities at high intensity laser facilities. OMEGA-EP and NIF when irradiating mid and high Z targets can be a source of high-energy x-rays whose production mechanisms and use as backlighters are a subject of active research. This paper studies the properties and potential of existing asymmetric cut crystal pairs from the National Institute of Standards and Technology (NIST) built in a new enclosure for imaging x-ray sources. The technique of the x-ray magnifier has been described previously. This new approach is aimed to find a design that could be used at laser facilities by magnifying the x-ray source into a screen far away from the target chamber center, with fixed magnification defined by the crystals' lattice spacing and the asymmetry angles. The magnified image is monochromatic and the imaging wavelength is set by crystal asymmetry and incidence angles. First laboratory results are presented and discussed.

36 MATERIALS SCIENCE↗

Development of a short duration backlit pinhole for radiography on the National Ignition Facility

Experiments on the National Ignition Facility (NIF) will require bright, short duration, near-monochromatic x-ray backlighters for radiographic diagnosis of many high-energy density systems. This paper details a vanadium pinhole backlighter producing (1.8{+-}0.5)x10{sup 15} x-ray photons into 4{pi} sr near the vanadium He-like characteristic x-ray energy of 5.18 keV. The x-ray yield was quantified from a set of Ross filters imaged to a calibrated image plate, with the Dante diagnostic used to confirm the quasimonochromatic nature of the spectrum produced. Additionally, an x-ray film image shows a source-limited image resolution of 26 {mu}m from a 20 {mu}m diameter pinhole.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: Diagnosing femtosecond laser-solid interactions with monochromatic K{sub {alpha}} imager and x-ray pinhole camera

An x-ray pinhole camera and a monochromatic K{sub {alpha}} imager are used to measure the interactions of intense femtosecond laser pulses with Cu foil targets. The two diagnostics give different features in the spot size and the laser energy scaling, which are resulted from different physical processes. Under our experimental conditons, the K{sub {alpha}} emission is mainly excited by the fast electrons transporting inside the cold bulk target. In contrast, the x-ray pinhole signals are dominated by the broadband thermal x-ray emission from the hot plasma at the front target surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Equilibrium velocity distributions in parallel propagating low-frequency Alfvenic turbulence

The equilibrium velocity distributions in parallel propagating, circularly polarized low-frequency Alfvenic turbulence are presented. The equilibrium solutions of the monochromatic Alfven waves are extended to those of incompressible Alfvenic turbulence with the broadband spectrum in low beta plasmas. It is shown that the ''apparent temperature'' due to the nonresonant ion heating is explained on the basis of the equilibrium velocity distribution. The anisotropic equilibrium velocity distribution corresponding to Alfvenic turbulence in the Chew-Goldberger-Low system is also demonstrated. It is suggested that the distribution can be the back ground structure in the asymmetric velocity distributions observed in the solar wind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: Binding energy scale calibration of electron spectrometers for photoelectron spectroscopy using a single sample

The feasibility of calibrating the binding energy scale for photoelectron spectroscopy using a single sample without sputter cleaning was investigated. By measuring the Fermi level of a Au film with both monochromatic Al K{alpha} (h{nu}= 1486.7 eV) and He I{alpha} (h{nu}= 21.22 eV), the binding energy scale was simply and accurately calibrated. This method is found to yield binding energy values for the Cu 2p{sub 3/2}, Ag 3d{sub 5/2}, and Au 4f{sub 7/2} peaks that agree with the standard tabulated values defined in International Organization for Standardization 15472 to within {+-}0.02 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gas dynamic effects on formation of carbon dimers in laser-produced plasmas

We investigated the effect of helium and nitrogen pressures on the dynamics of molecular species formation during laser ablation of carbon. For producing plasmas, planar carbon targets were irradiated with 1064 nm, 6 ns pulses from an Nd:yttrium aluminum garnet laser. The emission from excited C{sub 2} and CN molecules was studied using space resolved optical time-of-flight emission spectroscopy and spectrally resolved fast imaging. The intensity oscillations in C{sub 2} and CN monochromatic fast imaging and their emission space-time contours suggest that recombination is the major mechanism of C{sub 2} formation within the laser ablation carbon plumes in the presence of ambient gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ observation of x-ray irradiation effect by using a multiwave x-ray diffraction phenomenon

In situ observation of the complex scattering amplitude of x-ray specular reflection (amplitude reflectivity) was performed by using a method with a multiwave x-ray diffraction phenomenon. The method can be applied to the noncrystalline layers on a single crystal and allows us to determine its amplitude reflectivity with only a 0.01 degree of crystal rotation, that is, the area irradiated by the incident x rays is almost unchanged during the measurement. We used this method to observe an irradiation effect induced by monochromatic synchrotron x-rays that occurred on a Si(001) single crystal covered with a native oxide layer. The obtained time evolution of the amplitude reflectivities exhibited counterclockwise behavior in the complex plane, indicating that the thickness of the noncrystalline layer on the crystalline substrate was increased by the irradiation.

36 MATERIALS SCIENCE↗