Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIPROCESSORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Performance effects of irregular communications patterns on massively parallel multiprocessors

A detailed study of the performance effects of irregular communications patterns on the CM-2 was conducted. The communications capabilities of the CM-2 were characterized under a variety of controlled conditions. In the process of carrying out the performance evaluation, extensive use was made of a parameterized synthetic mesh. In addition, timings with unstructured meshes generated for aerodynamic codes and a set of sparse matrices with banded patterns on non-zeroes were performed. This benchmarking suite stresses the communications capabilities of the CM-2 in a range of different ways. Benchmark results demonstrate that it is possible to make effective use of much of the massive concurrency available in the communications network.

Saltz, Joel↗
NASA NTRS1991

Asynchronous and corrected-asynchronous numerical solutions of parabolic PDES on MIMD multiprocessors

A major problem in achieving significant speed-up on parallel machines is the overhead involved with synchronizing the concurrent process. Removing the synchronization constraint has the potential of speeding up the computation. The authors present asynchronous (AS) and corrected-asynchronous (CA) finite difference schemes for the multi-dimensional heat equation. Although the discussion concentrates on the Euler scheme for the solution of the heat equation, it has the potential for being extended to other schemes and other parabolic partial differential equations (PDEs). These schemes are analyzed and implemented on the shared memory multi-user Sequent Balance machine. Numerical results for one and two dimensional problems are presented. It is shown experimentally that the synchronization penalty can be about 50 percent of run time: in most cases, the asynchronous scheme runs twice as fast as the parallel synchronous scheme. In general, the efficiency of the parallel schemes increases with processor load, with the time level, and with the problem dimension. The efficiency of the AS may reach 90 percent and over, but it provides accurate results only for steady-state values. The CA, on the other hand, is less efficient, but provides more accurate results for intermediate (non steady-state) values.

Amitai, Dganit↗
NASA NTRS1991

Ordered fast Fourier transforms on a massively parallel hypercube multiprocessor

The present evaluation of alternative, massively parallel hypercube processor-applicable designs for ordered radix-2 decimation-in-frequency FFT algorithms gives attention to the reduction of computation time-dominating communication. A combination of the order and computational phases of the FFT is accordingly employed, in conjunction with sequence-to-processor maps which reduce communication. Two orderings, 'standard' and 'cyclic', in which the order of the transform is the same as that of the input sequence, can be implemented with ease on the Connection Machine (where orderings are determined by geometries and priorities. A parallel method for trigonometric coefficient computation is presented which does not employ trigonometric functions or interprocessor communication.

Tong, Charles↗
NASA NTRS1991

Performance effects of irregular communications patterns on massively parallel multiprocessors

A detailed study of the performance effects of irregular communications patterns on the CM-2 was conducted. The communications capabilities of the CM-2 were characterized under a variety of controlled conditions. In the process of carrying out the performance evaluation, extensive use was made of a parameterized synthetic mesh. In addition, timings with unstructured meshes generated for aerodynamic codes and a set of sparse matrices with banded patterns on non-zeroes were performed. This benchmarking suite stresses the communications capabilities of the CM-2 in a range of different ways. Benchmark results demonstrate that it is possible to make effective use of much of the massive concurrency available in the communications network.

Saltz, Joel↗
NASA NTRS1991

A contention-based bus-control scheme for multiprocessor systems

The authors study contention-based bus-control schemes for scheduling processors in using a bit-parallel shared bus. The protocol is designed under the requirements that each processor exhibit a random access behavior, that there be no centralized bus control in the system, and that access be granted in real time. The proposed scheme is based on splitting algorithms used in conventional contention-resolution schemes, and utilizes two-state information obtained from collision detection. Two versions of the bus-control scheme are studied. The static one resolves contentions of N requesting processors in an average of O(logW/2N) iterations, where W is the number of bits in the bit-parallel bus. An adaptive version resolves contentions in an average time that is independent of N.

Juang, Jie-Yong↗
NASA NTRS1991

Vienna FORTRAN: A FORTRAN language extension for distributed memory multiprocessors

Exploiting the performance potential of distributed memory machines requires a careful distribution of data across the processors. Vienna FORTRAN is a language extension of FORTRAN which provides the user with a wide range of facilities for such mapping of data structures. However, programs in Vienna FORTRAN are written using global data references. Thus, the user has the advantage of a shared memory programming paradigm while explicitly controlling the placement of data. The basic features of Vienna FORTRAN are presented along with a set of examples illustrating the use of these features.

Chapman, Barbara↗
NASA NTRS1989

Efficient ICCG on a shared memory multiprocessor

Different approaches are discussed for exploiting parallelism in the ICCG (Incomplete Cholesky Conjugate Gradient) method for solving large sparse symmetric positive definite systems of equations on a shared memory parallel computer. Techniques for efficiently solving triangular systems and computing sparse matrix-vector products are explored. Three methods for scheduling the tasks in solving triangular systems are implemented on the Sequent Balance 21000. Sample problems that are representative of a large class of problems solved using iterative methods are used. We show that a static analysis to determine data dependences in the triangular solve can greatly improve its parallel efficiency. We also show that ignoring symmetry and storing the whole matrix can reduce solution time substantially.

Hammond, Steven W.↗
NASA NTRS1992

Iterative methods for large scale static analysis of structures on a scalable multiprocessor supercomputer

A parallel Preconditioned Conjugate Gradient (PCG) iterative solver has been developed and implemented on the iPSC-860 scalable hypercube. This new implementation makes use of the Parallel Automated Runtime Toolkit at ICASE (PARTI) primitives to efficiently program irregular communications patterns that exist in general sparse matrices and in particular in the finite element sparse stiffness matrices. The iterative PCG has been used to solve the finite element equations that result from discretizing large scale aerospace structures. In particular, the static response of the High Speed Civil Transport (HSCT) finite element model is solved on the iPSC-860.

Sobh, Nahil Atef↗
NASA NTRS1991

Parallel variable-band Choleski solvers for computational structural analysis applications on vector multiprocessor supercomputers

A Choleski method used to solve linear systems of equations that arise in large scale structural analyses is described. The method uses a novel variable-band storage scheme and is structured to exploit fast local memory caches while minimizing data access delays between main memory and vector registers. Several parallel implementations of this method are described for the CRAY-2 and CRAY Y-MP computers demonstrating the use of microtasking and autotasking directives. A portable parallel language, FORCE, is also used for two different parallel implementations, demonstrating the use of CRAY macrotasking. Results are presented comparing the matrix factorization times for three representative structural analysis problems from runs made in both dedicated and multi-user modes on both the CRAY-2 and CRAY Y-MP computers. CPU and wall clock timings are given for the various parallel methods and are compared to single processor timings of the same algorithm. Computation rates over 1 GIGAFLOP (1 billion floating point operations per second) on a four processor CRAY-2 and over 2 GIGAFLOPS on an eight processor CRAY Y-MP are demonstrated as measured by wall clock time in a dedicated environment. Reduced wall clock times for the parallel methods relative to the single processor implementation of the same Choleski algorithm are also demonstrated for runs made in multi-user mode.

Poole, E. L.↗
NASA NTRS1992

A balanced submatrix merging algorithm for multiprocessor architectures

In this article, a parallel algorithm which applies Givens rotations to selectively annihilate k(k + 1)/2 nonzero elements from two k x n(k not more than n) upper trapezoidal submatrices is described. The new algorithm is suitable for implementation on either a pair of directly connected local-memory processors or two clusters of multiple tightly-coupled processors. Analyses show that in both cases the proposed algorithms achieve optimal speed-up by balancing the work load distribution and masking interprocessor or intercluster communication by computation if k is much small than n. In the context of solving large scale least squares problems, this submatrix merging step is repetitively needed during the entire computation and, furthermore, there are usually many pairs of such submatrices to be merged with each submatrix stored in the memory of a processor or a cluster of processors. The proposed algorithm can be applied to each pair of submatrices concurrently, and thus parallelizes an important step in solving the least squares problems.

Chu, Eleanor↗
NASA NTRS1993

A comparison of multiprocessor scheduling methods for iterative data flow architectures

A comparative study is made between the Algorithm to Architecture Mapping Model (ATAMM) and three other related multiprocessing models from the published literature. The primary focus of all four models is the non-preemptive scheduling of large-grain iterative data flow graphs as required in real-time systems, control applications, signal processing, and pipelined computations. Important characteristics of the models such as injection control, dynamic assignment, multiple node instantiations, static optimum unfolding, range-chart guided scheduling, and mathematical optimization are identified. The models from the literature are compared with the ATAMM for performance, scheduling methods, memory requirements, and complexity of scheduling and design procedures.

Storch, Matthew↗
NASA NTRS1993

Low latency messages on distributed memory multiprocessors

Many of the issues in developing an efficient interface for communication on distributed memory machines are described and a portable interface is proposed. Although the hardware component of message latency is less than one microsecond on many distributed memory machines, the software latency associated with sending and receiving typed messages is on the order of 50 microseconds. The reason for this imbalance is that the software interface does not match the hardware. By changing the interface to match the hardware more closely, applications with fine grained communication can be put on these machines. Based on several tests that were run on the iPSC/860, an interface that will better match current distributed memory machines is proposed. The model used in the proposed interface consists of a computation processor and a communication processor on each node. Communication between these processors and other nodes in the system is done through a buffered network. Information that is transmitted is either data or procedures to be executed on the remote processor. The dual processor system is better suited for efficiently handling asynchronous communications compared to a single processor system. The ability to send data or procedure is very flexible for minimizing message latency, based on the type of communication being performed. The test performed and the proposed interface are described.

Rosing, Matthew↗
NASA NTRS1993

Optimal cube-connected cube multiprocessors

Many CFD (computational fluid dynamics) and other scientific applications can be partitioned into subproblems. However, in general the partitioned subproblems are very large. They demand high performance computing power themselves, and the solutions of the subproblems have to be combined at each time step. The cube-connect cube (CCCube) architecture is studied. The CCCube architecture is an extended hypercube structure with each node represented as a cube. It requires fewer physical links between nodes than the hypercube, and provides the same communication support as the hypercube does on many applications. The reduced physical links can be used to enhance the bandwidth of the remaining links and, therefore, enhance the overall performance. The concept and the method to obtain optimal CCCubes, which are the CCCubes with a minimum number of links under a given total number of nodes, are proposed. The superiority of optimal CCCubes over standard hypercubes was also shown in terms of the link usage in the embedding of a binomial tree. A useful computation structure based on a semi-binomial tree for divide-and-conquer type of parallel algorithms was identified. It was shown that this structure can be implemented in optimal CCCubes without performance degradation compared with regular hypercubes. The result presented should provide a useful approach to design of scientific parallel computers.

Sun, Xian-He↗
NASA NTRS1995

Design tool for multiprocessor scheduling and evaluation of iterative dataflow algorithms

A graph-theoretic design process and software tool is defined for selecting a multiprocessing scheduling solution for a class of computational problems. The problems of interest are those that can be described with a dataflow graph and are intended to be executed repetitively on a set of identical processors. Typical applications include signal processing and control law problems. Graph-search algorithms and analysis techniques are introduced and shown to effectively determine performance bounds, scheduling constraints, and resource requirements. The software tool applies the design process to a given problem and includes performance optimization through the inclusion of additional precedence constraints among the schedulable tasks.

Jones, Robert L., III↗
NASA NTRS1995

Multiprocessor Adaptive Control Of A Dynamic System

Architecture for fully autonomous digital electronic control system developed for use in identification and adaptive control of dynamic system. Architecture modular and hierarchical. Combines relatively simple, standardized processing units into complex parallel-processing subsystems. Although architecture based on neural-network concept, processing units themselves not neural networks; processing units implemented by programming of currently available microprocessors.

Juang, Jer-Nan↗
NASA NTRS1996

Impact of Load Balancing on Unstructured Adaptive Grid Computations for Distributed-Memory Multiprocessors

The computational requirements for an adaptive solution of unsteady problems change as the simulation progresses. This causes workload imbalance among processors on a parallel machine which, in turn, requires significant data movement at runtime. We present a new dynamic load-balancing framework, called JOVE, that balances the workload across all processors with a global view. Whenever the computational mesh is adapted, JOVE is activated to eliminate the load imbalance. JOVE has been implemented on an IBM SP2 distributed-memory machine in MPI for portability. Experimental results for two model meshes demonstrate that mesh adaption with load balancing gives more than a sixfold improvement over one without load balancing. We also show that JOVE gives a 24-fold speedup on 64 processors compared to sequential execution.

Biswas, Rupak↗
NASA NTRS1996

Impact of Load Balancing on Unstructured Adaptive Grid Computations for Distributed-Memory Multiprocessors

The computational requirements for an adaptive solution of unsteady problems change as the simulation progresses. This causes workload imbalance among processors on a parallel machine which, in turn, requires significant data movement at runtime. We present a new dynamic load-balancing framework, called JOVE, that balances the workload across all processors with a global view. Whenever the computational mesh is adapted, JOVE is activated to eliminate the load imbalance. JOVE has been implemented on an IBM SP2 distributed-memory machine in MPI for portability. Experimental results for two model meshes demonstrate that mesh adaption with load balancing gives more than a sixfold improvement over one without load balancing. We also show that JOVE gives a 24-fold speedup on 64 processors compared to sequential execution.

Sohn, Andrew↗
NASA NTRS1998

Performance Modeling and Measurement of Parallelized Code for Distributed Shared Memory Multiprocessors

This paper presents a model to evaluate the performance and overhead of parallelizing sequential code using compiler directives for multiprocessing on distributed shared memory (DSM) systems. With increasing popularity of shared address space architectures, it is essential to understand their performance impact on programs that benefit from shared memory multiprocessing. We present a simple model to characterize the performance of programs that are parallelized using compiler directives for shared memory multiprocessing. We parallelized the sequential implementation of NAS benchmarks using native Fortran77 compiler directives for an Origin2000, which is a DSM system based on a cache-coherent Non Uniform Memory Access (ccNUMA) architecture. We report measurement based performance of these parallelized benchmarks from four perspectives: efficacy of parallelization process; scalability; parallelization overhead; and comparison with hand-parallelized and -optimized version of the same benchmarks. Our results indicate that sequential programs can conveniently be parallelized for DSM systems using compiler directives but realizing performance gains as predicted by the performance model depends primarily on minimizing architecture-specific data locality overhead.

Waheed, Abdul↗