Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Magnetic properties versus interface density in rigid-exchange-coupled amorphous multilayers with induced uniaxial anisotropy

We demonstrate the possibility to tune the saturation magnetization, coercivity, and uniaxial in-plane anisotropy constant in amorphous bilayers and multilayers of Co 85 (Al 70 Zr 30 ) 15 and Sm 11 Co 82 Ti 7 through the interface density. From magnetometry and x-ray circular dichroism (XMCD) measurements, we conclude that the easy-axis coercivity μ 0 H c increases four times when the number of bilayer repetitions, N, increases from 1 to 10 within a constant total sample thickness of 20 nm. At the same time, the anisotropy constant K u also increases by a factor four, whereas the saturation magnetization M s decreases slightly. The Co spin and orbital moments, m s and m l , are found to be approximately constant within the sample series. The average total Co moment is only 0.8-0.9 μ B /atom, but the m l /m s ratio is strongly enhanced compared to pure Co. Magnetization curves extracted from XMCD measurements show that the Co and Sm moments are ferromagnetically coupled for all samples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

A Brillouin light scattering study of the spin-wave magnetic field dependence in a magnetic hybrid system made of an artificial spin-ice structure and a film underlayer

We present a combined Brillouin light scattering (BLS) and micromagnetic simulation investigation of the magnetic-field-dependent spin-wave spectra in a hybrid structure made of permalloy (NiFe) artificial spin-ice (ASI) systems, composed of stadium-shaped nanoislands, deposited on the top of an unpatterned permalloy film with a nonmagnetic spacer layer. The thermal spin-wave spectra were recorded by BLS as a function of the magnetic field applied along the symmetry direction of the ASI sample. Magneto-optic Kerr effect magnetometry was used to measure the hysteresis loops in the same orientation as the BLS measurements. Here, the frequency and the intensity of several spin-wave modes detected by BLS were measured as a function of the applied magnetic field. Micromagnetic simulations enabled us to identify the modes in terms of their frequency and spatial symmetry and to extract information about the existence and strength of the dynamic coupling, relevant only to a few modes of a given hybrid system. Using this approach, we suggest a way to understand if the dynamic coupling between ASI and film modes is present or not, with interesting implications for the development of future three-dimensional magnonic applications and devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Hole doping in compositionally complex correlated oxide enables tunable exchange biasing

Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO 3 perovskite oxide La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrical, optical, and magnetic properties of amorphous yttrium iron oxide thin films and consequences for non-local resistance measurements

We present magnetic characterization, charge resistivity, and optical photoluminescence measurements on amorphous yttrium iron oxide thin films ( ⁠a-Y–Fe–O), with supporting comparisons to amorphous germanium (⁠ a-Ge) films. We measured magnetic properties with both SQUID magnetometry and polarized neutron reflectometry. These results not only confirm that a-Y–Fe–O is a disordered magnetic material with strong predominantly antiferromagnetic exchange interactions and a high degree of frustration, but also that it is best understood electrically as a disordered semiconductor. As with amorphous germanium, a-Y–Fe–O obeys expectations for variable-range hopping through localized electron states over a wide range of temperature. We also clarify the consequences of charge transport through such a semiconducting medium for non-local voltage measurements intended to probe spin transport in nominally insulating magnetic materials. We further compare non-local resistance measurements made with “quasi-dc” automated current reversal to ac measurements made with a lock-in amplifier. These show that the “quasi-dc” measurement has an effective ac current excitation with frequency up to approximately 22 Hz, and that this effective ac excitation can cause artifacts in these measurements including incorrect sign of the non-local resistance. Here, this comprehensive investigation of non-local resistance measurements in a-Y–Fe–O shows no evidence of spin transport on micrometer length scales, which is contrary to our original work, and in line with more recent investigations by other groups.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Large ordered moment with strong easy-plane anisotropy and vortex-domain pattern in the kagome ferromagnet Fe 3 Sn

We report the magnetic anisotropy of kagome bilayer ferromagnet Fe 3 Sn probed by the bulk magnetometry and magnetic force microscopy (MFM) on high-quality single crystals. The dependence of magnetization on the orientation of the external magnetic field reveals strong easyplane magnetocrystalline anisotropy and anisotropy of the saturation magnetization. The leading magnetocrystalline anisotropy constant shows a monotonous increase from $\mathrm{K_1$≈ –1.0 \times 10^6 J/m^3}$ at 300 K to $\mathrm{–1.3 \times 10^6 J/m^3}$ at 2 K. Our ab initio electronic structure calculations yield the value of total magnetic moment of 7.1$μ_Β$/$f.u.$ and a magnetocrystalline anisotropy energy density of –0.57 $\mathrm{meV/}$$f.u.$ $\mathrm{(–1.62 \times 10^6J/m^3)}$ both being in reasonable agreement with the experimental values. The MFM imaging reveals micrometer-scale magnetic vortices with weakly pinned cores that vanish at the saturation field of ~3T applied perpendicular to the kagome plane. The observed vortex-domain structure is well reproduced by the micromagnetic simulations, using the experimentally determined value of the anisotropy and exchange stiffness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A practical approach to calculating magnetic Johnson noise for precision measurements

Magnetic Johnson noise is an important consideration for many applications involving precision magnetometry, and its significance will only increase in the future with improvements in measurement sensitivity. The fluctuation–dissipation theorem can be utilized to derive analytic expressions for magnetic Johnson noise in certain situations, but when used in conjunction with finite element analysis tools, the combined approach is particularly powerful as it provides a practical means to calculate the magnetic Johnson noise arising from conductors of arbitrary geometry and permeability. In this paper, we demonstrate this method to be one of the most comprehensive approaches presently available to calculate thermal magnetic noise. In particular, its applicability is shown to not be limited to cases where the noise is evaluated at a point in space but also can be expanded to include cases where the magnetic field detector has a more general shape, such as a finite-size loop, a gradiometer, or a detector that consists of a polarized atomic species trapped in a volume. Furthermore, some physics insights gained through studies made using this method are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Growth and characterization of La 0.67 Sr 0.33 MnO 3 /YBa 2 Cu 3 O 7- δ bilayers

Understanding the interplay of ferromagnets and superconductors requires high quality interfaces. To this end, we have fabricated heterostructures of the cuprate superconductor YBa2Cu3O7-δ (YBCO) with the metallic ferromagnet La0.67Sr0.33MnO3 (LSMO) via pulsed laser deposition on SrTiO3 (STO) (001) and (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) (001) substrates. By varying the YBCO thickness from 1.7-13.6 nm while keeping the LSMO thickness at 12 nm, we have studied the interplay between ferromagnetism and superconductivity in the in-plane transport and magnetic properties of the bilayers. X-ray reflectivity data indicate the presence of a 2-3 nm thick interfacial layer between the LSMO and YBCO layers in all heterostructures. In-plane transport measurements exhibit suppression of the superconducting transition temperature from bulk YBCO values. Magnetometry measurements indicate high LSMO saturation magnetization values for samples grown on STO substrates and even higher (bulk-like) magnetization for bilayers grown on LSAT substrates. Together these results indicate that the interdiffused layer is largely attributed to a modified YBCO layer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic anisotropy and spin scattering in (La 2/3 Sr 1/3 )MnO 3 /CaRuO 3 bilayers

Complex ferromagnetic oxides have been identified as possible candidate materials for sources of spin currents. Here we study bilayers of ferromagnetic (La 2/3 Sr 1/3 )MnO 3 (LSMO) and metallic CaRuO 3 (CRO) on LSAT substrates as a model system for spin pumping. Ferromagnetic resonance (FMR) measurements of these bilayers show evidence of spin pumping across the interface in the form of an increase in Gilbert damping with the addition of CRO. FMR indicates that the presence of CRO modifies the magnetic anisotropy of the LSMO. By increasing CRO thickness, we find a reduction of the out-of-plane anisotropy and simultaneous rotation of the easy axis within the plane, from the $\langle$110$\rangle$ to $\langle$100$\rangle$ axis. The evolution of magnetic anisotropy determined by FMR disagrees with that measured by bulk SQUID magnetometry and is accompanied by structural distortions in the LSMO layer as measured by x-ray diffraction, thus suggesting a change in magnetic anisotropy attributed to structural distortions imposed on LSMO by CRO. These results suggest that while LSMO and CRO remain promising candidates for efficient pure spin current generation and detection, respectively, epitaxial integration of perovskites will cause additional changes which must be accounted for in spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Emergent magnetic properties of biphase iron oxide nanorods

We report on the magnetic properties of biphase iron oxide nanorods (NRs) consisting of ferrimagnetic Fe 3 O 4 and antiferromagnetic α-Fe 2 O 3 phases. Annealing as-prepared NRs at 250 °C for 5h, significantly improved the crystallinity of the Fe 3 O 4 phase and enhanced the volume fraction of the α-Fe 2 O 3 phase. Magnetometry data consistently reveal these two magnetically distinct phases, which are not in proximity to each other but separated by a region of disordered spins giving rise to enhanced magnetization at low temperatures when the sample was cooled down from 300 K in the presence of a 1T field to 10 K. This phenomenon which is also known as the pinning effect is much more pronounced in the annealed sample, resulting from the increased volume fraction of the α-Fe 2 O 3 phase which could strengthen the interfacial spin frustration between these two phases and enhance the density of disordered spins at the interface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Proximity enhanced magnetism at NiFe 2 O 4 /Graphene interface

Here, we explore the change in effective magnetic anisotropy of the ferrimagnetic (FM) insulator nickel ferrite (NFO) thin film due to the inclusion of monolayer graphene (MLG) grown on top of the NFO layer. This was done by performing radio frequency (RF) transverse susceptibility (TS) measurements on bare NFO and NFO/MLG bilayer samples for both in-plane (IP) and out-of-plane (OOP) configurations utilizing a tunnel diode oscillator technique. Our magnetometry measurements indicated an enhancement in the overall saturation magnetization of the NFO/MLG bilayer with respect to the bare NFO film. The TS measurements reveal that the inclusion of MLG reduces the effective magnetic anisotropy for both IP and OOP configurations drastically, by up to a factor of 2 over the temperature range 40 K ≤ T ≤ 280 K. Since NFO is a magnetic substrate, it is possible that NFO could induce magnetic ordering in MLG at the NFO/MLG interface via the magnetic proximity effect. Furthermore, since NFO is insulating and MLG is a semimetal, there likely exists a large conductivity difference at the interface, making charge transfer plausible. These two effects could modify the interfacial magnetism leading to a change in the effective magnetic anisotropy. These results highlight the importance of understanding the interfacial magnetism of FM/MLG heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Assessment of minnealloy fabrication via three routes

Transformer cores exhibiting higher operating power and improved efficiency are of great interest to electrical utilities, industry, and the de-carbonization effort. Minnealloy, α″-Fe16(C,N)2, a martensite made only of iron, nitrogen, and carbon, has shown the largest saturation magnetization of any soft ferromagnet, 250 emu/g, and tunable magnetocrystalline anisotropy. Given this represents a significant increase in power transferred per cycle compared to legacy transformer core materials, we investigate three novel, industrially scalable routes for fabricating Minnealloy. The martensite phase content is investigated for each route. Vibrating sample magnetometry is used to investigate the change in saturation magnetization and coercivity with respect to the relative content of the desired phase and other iron, iron-nitride, and iron oxide phase impurities. The relationship between structure and magnetic properties of bulk α″-Fe16(C,N)2 is investigated using LDA, PBE, and PBEsol exchange-correlation functionals within the frameworks of Hubbard-corrected density functional theory (DFT+U).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Superconductivity found in meteorites

Meteorites can contain a wide range of material phases due to the extreme environments found in space and are ideal candidates to search for natural superconductivity. However, meteorites are chemically inhomogeneous, and superconducting phases in them could potentially be minute, rendering detection of these phases difficult. To alleviate this difficulty, we have studied meteorite samples with the ultrasensitive magnetic field modulated microwave spectroscopy (MFMMS) technique [J. G. Ramírez, A. C. Basaran, J. de la Venta, J. Pereiro, I. K. Schuller, Rep. Prog. Phys. 77, 093902 (2014)]. Here, we report the identification of superconducting phases in two meteorites, Mundrabilla, a group IAB iron meteorite [R. Wilson, A. Cooney, Nature 213, 274–275 (1967)] and GRA 95205, a ureilite [J. N. Grossman, Meteorit. Planet. Sci. 33, A221–A239 (1998)]. MFMMS measurements detected superconducting transitions in samples from each, above 5 K. By subdividing and remeasuring individual samples, grains containing the largest superconducting fraction were isolated. The superconducting grains were then characterized with a series of complementary techniques, including vibrating-sample magnetometry (VSM), energy-dispersive X-ray spectroscopy (EDX), and numerical methods. Finally, these measurements and analysis identified the likely phases as alloys of lead, indium, and tin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Morphogenesis of spin cycloids in a noncollinear antiferromagnet

Pattern formation in spin systems with continuous-rotational symmetry (CRS) provides a powerful platform to study emergent complex magnetic phases and topological defects in condensed-matter physics. However, its understanding and correlation with unconventional magnetic order along with high-resolution nanoscale imaging are challenging. Here, we employ scanning nitrogen vacancy (NV) magnetometry to unveil the morphogenesis of spin cycloids at both the local and global scales within a single ferroelectric domain of (111)-oriented BiFeO 3 , which is a noncollinear antiferromagnet, resulting in formation of a glassy labyrinthine pattern. We find that the domains of locally oriented cycloids are interconnected by an array of topological defects and exhibit isotropic energy landscape predicted by first-principles calculations. We propose that the CRS of spin-cycloid propagation directions within the (111) drives the formation of the labyrinthine pattern and the associated topological defects such as antiferromagnetic skyrmions. Unexpectedly, reversing the as-grown ferroelectric polarization from [$\overline{1}$ $\overline{1}$ $\overline{1}$] to [111] produces a noncycloidal NV image contrast which ¯ could be attributed to either the emergence of a uniformly magnetized state or a reversal of the cycloid polarity. These findings highlight that (111)-oriented BiFeO 3 is not only important for studying the fascinating subject of pattern formation but could also be utilized as an ideal platform for integrating novel topological defects in the field of antiferromagnetic spintronics.

magnetoelectric↗
DOE OSTI2020

The effect of Cu additions in FePt–BN–SiO 2 heat-assisted magnetic recording media

Structural and chemical order impact magnetic properties of solids, which are governed by spin–orbit coupling and exchange interaction. The ordered L1 0 phase of FePt is a key material to heat-assisted magnetic recording; to enable high storage density, a solid understanding is needed of structural and chemical disorder at small length scales, as well as associated modifications of the electronic band structure. Here, we investigate the effect of boron and copper additions (≲6 mol% Cu) on structural and magnetic properties of L1 0 FePt granular media. Two copper-driven mechanisms, although competing, can lead to improvements in both structural and magnetic properties. In particular, the Cu substitution on the Fe-site leads to a degradation of magnetic properties due to the delocalized electron orbitals originating from a larger Cu d -orbital occupancy. At the same time, Cu substitution leads to an enhanced crystallographic order and consequently magneto-crystalline anisotropy, which offsets the former effect to a large extent. Our study is based on magnetometry, x-ray absorption spectroscopy, ab-initio calculations and a phenomenological theory of disordered FePt granular media. We do not observe a sizable modification to Fe moments and electronic configuration; Cu reveals two different resonances associated with the presence and absence of Cu–B bonds that vary with total Cu concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Fermi surfaces of the topological semimetal CaSn 3 probed through de Haas van Alphen oscillations

Abstract In the search of topological superconductors, nailing down the Fermiology of the normal state is as crucial a prerequisite as unraveling the superconducting pairing symmetry. In particular, the number of time-reversal-invariant momenta (TRIM) in the Brillouin zone enclosed by Fermi surfaces is closely linked to the topological class of time-reversal-invariant systems, and can experimentally be investigated. We report here a detailed study of de Haas van Alphen quantum oscillations in single crystals of the topological semimetal CaSn 3 with torque magnetometry in high magnetic fields up to 35 T. In conjunction with density functional theory based calculations, the observed quantum oscillations frequencies indicate that the Fermi surfaces of CaSn 3 enclose an odd number of TRIM, satisfying one of the proposed criteria to realize topological superconductivity. Nonzero Berry phases extracted from the magnetic oscillations also support the nontrivial topological nature of CaSn 3 .

Physics↗
DOE OSTI2022

Emergent magnetism and exchange bias effect in iron oxide nanocubes with tunable phase and size

Abstract We report a systematic investigation of the magnetic properties including the exchange bias (EB) effect in an iron oxide nanocube system with tunable phase and average size (10, 15, 24, 34, and 43 nm). X-ray diffraction and Raman spectroscopy reveal the presence of Fe 3 O 4 , FeO, and α -Fe 2 O 3 phases in the nanocubes, in which the volume fraction of each phase varies depending upon particle size. While the Fe 3 O 4 phase is dominant in all and tends to grow with increasing particle size, the FeO phase appears to coexist with the Fe 3 O 4 phase in 10, 15, and 24 nm nanocubes but disappears in 34 and 43 nm nanocubes. The nanocubes exposed to air resulted in an α -Fe 2 O 3 oxidized surface layer whose thickness scaled with particle size resulting in a shell made of α -Fe 2 O 3 phase and a core containing Fe 3 O 4 or a mixture of both Fe 3 O 4 and FeO phases. Magnetometry indicates that the nanocubes undergo Morin (of the α -Fe 2 O 3 phase) and Verwey (of the Fe 3 O 4 phase) transitions at ∼250 K and ∼120 K, respectively. For smaller nanocubes (10, 15, and 24 nm), the EB effect is observed below 200 K, of which the 15 nm nanocubes showed the most prominent EB with optimal antiferromagnetic (AFM) FeO phase. No EB is reported for larger nanocubes (34 and 43 nm). The observed EB effect is ascribed to the strong interfacial coupling between the ferrimagnetic (FiM) Fe 3 O 4 phase and AFM FeO phase, while its absence is related to the disappearance of the FeO phase. The Fe 3 O 4 / α -Fe 2 O 3 (FiM/AFM) interfaces are found to have negligible influence on the EB. Our findings shed light on the complexity of the EB effect in mixed-phase iron oxide nanosystems and pave the way to design exchange-coupled nanomaterials with desirable magnetic properties for biomedical and spintronic applications.

Physics↗
DOE OSTI2022

Electric current paths in a Si:P delta-doped device imaged by nitrogen-vacancy diamond magnetic microscopy

The recently-developed ability to control phosphorous-doping of silicon at an atomic level using scanning tunneling microscopy, a technique known as atomic precision advanced manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and mapping of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this report, we used nitrogen-vacancy (NV) centers in diamond for wide-field magnetic imaging (with a few-mm field of view and micron-scale resolution) of magnetic fields from surface currents flowing in an APAM test device made of a P delta-doped layer on a Si substrate, a standard APAM witness material. We integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current densities, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A m -1 , corresponding to a smallest-detectable current in the 200 μm wide APAM ribbon of ~6 μA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Magnetic state switching in FeGa microstructures

This work demonstrates that magnetoelectric composite heterostructures can be designed at the length scale of 10µms that can be switched from a magnetized state to a vortex state, effectively switching the magnetization off, using electric field induced strain. This was accomplished using thin film magnetoelectric heterostructures of Fe 81.4 Ga 18.6 on a single crystal (011) [Pb(Mg 1/3 Nb 2/3 )O 3 ] 0.68 -[PbTiO 3 ] 0.32 (PMN-32PT) ferroelectric substrate. Here, the heterostructures were tripped from a multi-domain magnetized state to a flux closure vortex state using voltage induced strain in a piezoelectric substrate. FeGa heterostructures were deposited on a Si-substrate for superconducting quantum interference device magnetometry characterization of the magnetic properties. The magnetoelectric coupling of a FeGa continuous film on PMN-32PT was characterized using a magneto optical Kerr effect magnetometer with bi-axial strain gauges, and magnetic multi-domain heterostructures were imaged using x-ray magnetic circular dichroism—photoemission electron microscopy during the transition to the vortex state. The domain structures were modelled using MuMax 3 , a micromagnetics code, and compared with observations. The results provide considerable insight into designing magnetoelectric heterostructures that can be switched from an ‘on’ state to an ‘off’ state using electric field induced strain.

36 MATERIALS SCIENCE↗