Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mars Science Orbiter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A long-life bipropellant system demonstration: Viking Orbiter Propulsion System - 4 years in space and operating

On April 23, 1980, Viking Orbiter One (VO-1), operating in the blowdown mode, completed a ten second Mars orbit trim maneuver to position the spacecraft for its final science sequence in May-June 1980. This brought the number of propulsive maneuvers for VO-1 to 23. Total accumulated operating time for the rocket engine was 2896 seconds, representing a total impulse of 3.93 x 10 to the 6th N-sec. The estimated propellant remaining was sufficient to operate the rocket engine for an additional 30 seconds. VO-1 has completed more than 1700 days in space, 1400 days in orbit around Mars and more than two years of attitude control system operation with helium gas transferred from the propulsion system pressurant tank. The mass of helium remaining is expected to be sufficient for attitude control through June 1980. This paper presents the flight history of the Viking 75 Orbiter Propulsion Systems and summarizes the design and test philosophy which have contributed to their success.

Schmit, D. D.↗

Mars Reconnaissance Orbiter design approach for high-resolution surface imaging

One of the objectives of the MRO mission is to use the High-Resolution Imaging Science Experiment (HiRISE) to provide 50 cm/pixel images of future Mars landing sites. To achieve such detail, MRO must meet some very challenging target-relative pointing and pointing stability requirements. A combination of analysis, operational constraints, and spacecraft design modifications were utilized to ensure that the necessary pointing requirements will be met.

Mars↗

Demonstration of Mars Crosslink Occultation Measurements for Future Small Spacecraft Constellations

Future planetary atmospheric profiling via radio occultations (RO) benefits significantly from increased received signal-to-noise ratio as well as geometrical coverage of links between two or more spacecraft in orbit around a target planet. These can be small spacecraft, possibly dedicated to quality radio-metrics with precision clock reference. Motivated by long-term research investigating the optimum SNR for the science performance, the optimum reference clock stability, the number and combination of wavelengths driving the number of transmitters and antennas, the optimum number and orbital spacecraft configuration, and design modifications to existing radio communication systems that would allow these new science objectives on future missions, three crosslink occultation experiments have been acquired between the Mars Odyssey and Mars Reconnaissance Orbiter spacecraft to probe the Martian atmosphere. While crosslink occultations between Earth orbiting satellites have long been used to profile the Earth’s atmosphere, this represents the first demonstration of crosslink occultation measurements at another planet. These measurements leverage the proximity link telecommunication payloads on each orbiter, which were designed to provide relay communication and navigation services to Mars landers and rovers. Analysis of the observed Doppler shift on each crosslink measurement reveals a clear signature of the Martian atmosphere, primarily the ionosphere. Inversion of the observed Doppler data yields vertical profiles of the Martian refractivity and electron density. The electron density profiles show the presence of two layers with peak densities and peak heights that are consistent with empirical models.

Asmar, Sami↗

Investigation of the Glen Torridon Clay-Bearing Unit and Overlying Greenheugh Pediment by the Sample Analysis at Mars Instrument Suite

Exploring the Glen Torridon (GT) clay-bearing unit in Gale crater has long been a prime goal for the Mars Science Laboratory (MSL) because of spectral signatures of smectite identified from orbit. Smectite clay minerals can indicate habitable environments [1,2] and possibly facilitate the preservation of organic compounds [e.g., 3-7].Also, sulfate-bearing layers overlie GT and this sequence may record a large-scale change in aqueous conditions overtime [8].The Sample Analysis at Mars (SAM) instrument suitehas been essential in understanding volatile-bearing phases in Gale crater materials. SAM EGA has detected H2O, CO2, O2, H2, SO2, H2S, HCl, NO, and other trace gases, including organic fragments, evolved from many samples on heating. The identity and evolution temperature of evolved gases can support mineral detection by CheMin instrument X-ray diffraction (XRD)and place constraints on trace volatile-bearing phases, clay mineral compositions, and X-ray amorphous materials. In GT, SAM analyzed the sample Kilmarie (KM) from the Jura member, Glen Etive (GE), Mary Anning (MA) and Groken (GR)from the Knockfarril Hill member (KHm), Glasgow (GG) and Hutton (HU) from the fractured Intermediate Unit (fIU), and Edinburgh (EB) from the Stimson formation rocks of the Greenheugh Pediment (GP). The Jura, KHm and fIU are all members of the Murray formation. HU was sampled near the basal Siccar Point group (SPg) unconformity between the fIU and GP, in an area that exhibits a brighter tone and differences in geochemistry compared to Murray materials down-section [9,10]. CheMin XRD of most samples (except for HU and EB)showed large abundances of smectite clay minerals (~25-35%) and all samples showed X-ray amorphous materials and relatively low amounts of well-crystalline hematite[11]. SAM evaluated mineralogy through evolved gas analysis mass spectrometry (EGA) while detailed organic chemistry of several samples was examined by pyrolysis gas chromatography mass spectrometry and wet chemistry experiments [12,13].Here we discuss data and interpretations from SAM EGA analyses.

Mars↗

Development and Evaluation of the Habitat Demonstration Unit Medical Operations Workstation and Opportunities for Future Research

As NASA develops missions to leave Earth orbit and explore distant destinations (Mars, Moon, Asteroids) it is necessary to rethink human spaceflight paradigms in the life sciences. Standards developed for low earth orbit human spaceflight may not be fully applicable and in-space research may be required to develop new standards. Preventative and emergency medical care may require new capabilities never before used in space. Due to spacecraft volume limitations, this work area may also be shared with various animal and plant life science research. This paper explores the prototype Medical Operations Workstation within the NASA Habitat Demonstration Unit and discusses some of the lessons learned from field analogue missions involving the workstation. Keywords: Exploration, medical, health, crew, injury emergency, biology, animal, plant, science, preventative, emergency.

Howard, Robert L., Jr.↗

Spectral, Compositional, and Physical Properties of the Upper Murray Formation and Vera Rubin Ridge, Gale Crater, Mars

During 2018 and 2019, the Mars Science Laboratory Curiosity rover investigated the chemistry, morphology, and stratigraphy of Vera Rubin ridge (VRR). Using orbital data from the Compact Reconnaissance Imaging Spectrometer for Mars, scientists attributed the strong 860 nm signal associated with VRR to the presence of red crystalline hematite. However, Mastcam multispectral data and CheMin X-ray diffraction (XRD) measurements show that the depth of the 860 nm absorption is negatively correlated with the abundance of red crystalline hematite, suggesting that other mineralogical or physical parameters are also controlling the 860 nm absorption. Here, we examine Mastcam and ChemCam passive reflectance spectra from VRR and other locations to link the depth, position, and presence or absence of iron-related mineralogic absorption features to the XRD-derived rock mineralogy. Correlating CheMin mineralogy to spectral parameters showed that the ~860 nm absorption has a strong positive correlation with the abundance of ferric phyllosilicates. New laboratory reflectance measurements of powdered mineral mixtures can reproduce trends found in Gale crater. We hypothesize that variations in the 860 nm absorption feature in Mastcam and ChemCam observations of VRR materials are a result of three factors: (1) variations in ferric phyllosilicate abundance due to its ~800–1,000 nm absorption; (2) variations in clinopyroxene abundance because of its band maximum at ~860 nm; and (3) the presence of red crystalline hematite because of its absorption centered at 860 nm. We also show that relatively small changes in Ca-sulfate abundance is one potential cause of the erosional resistance and geomorphic expression of VRR.

58 GEOSCIENCES↗

Thermal Modeling of Mars Ground for Surface Missions

Thermal analysis packages are capable of including ground temperature effects for orbital and surface thermal analyses. In particular, Thermal Desktop® offers the option of specifying ground temperatures as a function of time for planetary surface modeling. While suitable for many cases, this approach is not sufficient if an object has local interactions with the ground that could significantly affect the ground temperature. Ground modeling is necessary for the Mars 2020 rover thermal design and analysis since shadowing and heat dissipation from the rover’s Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) can result in significant temperature deviations of the local ground. The Mars 2020 thermal team is explicitly modeling the Martian ground so that these local temperature effects can be captured. The upper portion of the ground is modeled, and material and optical properties of the ground are varied in order to match data collected from orbiting science instruments. Atmospheric surface temperature, sky temperatures, and solar loads from a Mars General Circulation Model (GCM) are used as boundary conditions, resulting in a ground surface temperature profile consistent with the GCM predictions. The rover model is then placed on this modeled ground so that the effects of shadowing and MMRTG dissipation on the ground temperature can be captured.

Farias, Edgardo↗

Atmospheric Modeling Using Accelerometer Data During Mars Atmosphere and Volatile Evolution (MAVEN) Flight Operations

The Mars Atmosphere and Volatile EvolutioN (MAVEN) spacecraft is a NASA orbiter designed to explore the Mars upper atmosphere, typically from 140 to 160 km altitude. In addition to the nominal science mission, MAVEN has performed several Deep Dip campaigns in which the orbit's closest point of approach, also called periapsis, was lowered to an altitude range of 115 to 135 km. MAVEN accelerometer data were used during mission operations to estimate atmospheric parameters such as density, scale height, along-track gradients, and wave structures. Density and scale height estimates were compared against those obtained from the Mars Global Reference Atmospheric Model and used to aid the MAVEN navigation team in planning maneuvers to raise and lower periapsis during Deep Dip operations. This paper describes the processes used to reconstruct atmosphere parameters from accelerometers data and presents the results of their comparison to model and navigation-derived values.

Tolson, Robert H.↗

Overview of a Preliminary Destination Mission Concept for a Human Orbital Mission to the Martial Moons

The National Aeronautics and Space Administration s Human Spaceflight Architecture Team (HAT) has been developing a preliminary Destination Mission Concept (DMC) to assess how a human orbital mission to one or both of the Martian moons, Phobos and Deimos, might be conducted as a follow-on to a human mission to a near-Earth asteroid (NEA) and as a possible preliminary step prior to a human landing on Mars. The HAT Mars-Phobos-Deimos (MPD) mission also permits the teleoperation of robotic systems by the crew while in the Mars system. The DMC development activity provides an initial effort to identify the science and exploration objectives and investigate the capabilities and operations concepts required for a human orbital mission to the Mars system. In addition, the MPD Team identified potential synergistic opportunities via prior exploration of other destinations currently under consideration.

Mazanek, D. D.↗

(abstract) Mars Global Surveyor: A Global Mapping Mission

The Mars Global Surveyor Mission will launch a single spacecraft to Mars in November 1996. After arrival at the planet in September 1997 aerobraking will be used to lower the spacecraft into a low, sun-synchronous, polar-mapping orbit over several months. Early in 1998 mapping observations will begin and continue for a Mars year (687 days). Following completion of this first Mars year of mapping the spacecraft will continue to act as a relay orbiter for an additional three Earth years. The five instruments carried involve magnetometry, surface and atmosphere imaging, atmospheric sounding, laser altimetry, gravity and thermal emission spectroscopy. In addition, the spacecraft carries a Mars relay receiver/transmitter which will operate over the entire five year orbital mission ending in January of 2003. The Mars Global Surveyor mission is intended to accomplish a portion of the scientific objectives of the Mars Observer mission which was lost in 1993 three days before entering Mars orbit. The instrumentation to be used for the magnetometers, cameras, laser altimeter, emission spectrometer and radio science are very nearly the same as those carried by Mars Observer. The spacecraft design will be new but will use spare equipment from Mars Observer and has a mass about two and one-half time smaller. All experiments will be controlled remotely from their investigators home installation. The long planned period of observation supports the mission's global and seasonal objectives.

Mars Global Surveyor Mars Observer mapping spectro↗

Mars 2020 Radiometric Data and Telemetry Processing, Attitude Estimation, and Thruster Calibration for Orbit Determination

The Mars 2020 spacecraft was spin-stabilized during cruise, just like its predecessor, the Mars Science Laboratory. This spinning motion imparts a signature in the radiometric tracking data that must be dealt with in order to properly model the motion of the spacecraft's center of mass. We discuss how the Orbit Determination team pre-processed the data for efficient computations while also providing other benefits such as high-fidelity attitude modeling and on-board clock verification. Finally, we discuss the analysis and results of the in-flight thruster calibration activity.

Seubert, Jill↗

Exploration Studies Technical Report - Volume 3: Special Reports, Studies, and Indepth Systems Assessments

The NASA Office of Exploration has been tasked with defining and recommending alternatives for an early 1990's national decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report describes the process that has been developed in a case study approach. The four case studies that were developed in FY88 include: 1. Human expedition to Phobos 2. Human expeditions to Mars 3. Lunar observatory 4. Lunar outpost to early Mars evolution The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work. Volume III is a collection of trade study results, indepth systems assessments, and workshop reports which describe aspects of FY 1988 analyses in more depth.

Interplanetary flight↗

Mars Observer Orbit Insertion Briefing

For the first part of this briefing, see NONP-NASA-VT-2000081556. Marvin Traxler continues his discussion on signal tracking from the Mars Observer. Julie Webster, Lead Engineer, Telecommunications Subsystem, is introduced. She explains how signals coming back from Mars are detected. Dr. Pasquale Esposito talks about flyby orbits and capture orbits. He says that frequencies coming from the spacecraft can determine if the spacecraft has flown by Mars, or if a capture orbit has occurred. Charles Whetsel, System Engineer Spacecraft Team, presents a computer program. He shows where the signal will appear on the computer from the Spacecraft. Suzanne Dodd presents orbit insertion geometry. Dr. Arden Albee, Project Scientist Mars Observer Project, Cal Tech tech, says that Mars is studied to get more data to confirm their hypotheses derived from previous Mars Missions such as the Viking Mars Program and the Mariner Program. Dr. Albee also describes instrumentation on the Mars Observer such as the Ultra Stable Oscillator, Mars Orbiter Laser Altimeter, and Magnetometer. The camera on the spacecraft is similar to a fax machine because it scans one line at a time as the spacecraft orbits Mars. Dr. Michael Malin, Principle Investigator Mars Observer Camera, Malin Space Science Systems, Inc., describe this process.

Source record↗

Aeroassist Technologies for Small Satellite Missions

Orbit insertion operations that require large V maneuvers using conventional propulsive technologies are mass inefficient and challenging to package within SmallSat form factors such as the popular CubeSat. Aeroassist technologies offer an alternative approach for V maneuvers and could revolutionize the use of SmallSats for exploration missions and increase the science return while reducing costs for orbital or entry missions to Mars, Venus and return to Earth. Aeroassist refers to the use of an atmosphere to accomplish a transportation system function using techniques such as aerobraking, aerocapture, aeroentry, and aerogravity assist. Aeroassist technologies are power efficient and tolerant to the radiation and thermal environment encountered in deep space, and can be integrated around or within SmallSat geometries. This presentation will discuss various Aeroassist technologies including conventional rigid aeroshells, inflatable decelerators, mechanically deployable decelerators and other drag devices and control methods that should be considered by Small Satellite mission design teams.

Cassell, Alan M.↗

MSL relay coordination and tactical planning in the era of InSight, MAVEN, and TGO

This study examines an approach for optimizing the scheduling of regular relay communications between the Mars Science Laboratory (MSL) rover and the non-sun-synchronous Mars orbiters MAVEN and TGO as well as the impacts of the approaching InSight landing on MSL relay and tactical planning. Rover operations require knowledge of recently executed activities, termed decisional data, in order to inform tactical activity planning. As a result, timely and routine data return is critical for nominal rover operations. Mars orbiters are used as relay assets to achieve such timeliness.

Thomas, Steven↗

MAVEN Transition-To-Science Maneuvers and Comet Siding Spring

After the September 2014 arrival of the Mars Atmosphere Volatile Evolution mission (MAVEN) at Mars, the spacecraft was to perform five maneuvers to reduce the orbit period from 35 to 4.5 hours, and lower the periapsis altitude into the target in-situ science density corridor. While in route, however, the potential threat — and science opportunity — from Comet C/2013 Siding Spring crystallized, and the plan had to be modified to shield the spacecraft behind Mars and support new observations. This paper describes the plan modifications, Monte Carlo analyses necessary to ensure success, and results of executing the modified plan.

Young, Brian↗

The Use of Laser Altimetry in the Orbit and Attitude Determination of Mars Global Surveyor

Altimetry from the Mars Observer Laser Altimeter (MOLA) which is carried on board Mars Global Surveyor (MGS) has been analyzed for the period of the MOS mission known as Science Phasing Orbit 1 (SPO-1). We have used these altimeter ranges to improve orbit and attitude knowledge for MGS. This has been accomplished by writing crossover constraint equations that have been derived from short passes of MOLA data. These constraint equations differ from traditional Crossover constraints and exploit the small foot print associated with laser altimetry.

Rowlands, D. D.↗