Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Solar Maximum Mission - A systems overview

The Solar Maximum Mission (SMM), or the central effort of the Solar Maximum Year research endeavor is discussed. The mission's attempt to exploit the synergistic advantages of correlated data to obtain a complete picture of solar phenomena is stressed, as is the coordination provided by a world-wide network of ground-based observations. The prominent features of the SMM observatory, including the payload module and the solar-array system, are shown diagramatically and the science instruments (coronagraph/polarimeter, ultraviolet spectrometer/polarimeter, soft X-ray polychromater) are discussed. Descriptions of the spacecraft's electrical power system, attitude determination and control systems and communications systems are also included. The Experiment Operations Facility, which provides quick response to rapidly changing solar conditions and permits coordination with a multitude of ground observatories and coordinated experiments, is described.

Guha, A. K.↗

Studies of the corona with the Solar Maximum Mission coronagraph/polarimeter

The visible wavelength coronagraph/polarimeter on the Solar Maximum Mission (SMM) spacecraft is providing data on the flare processes manifested by coronal transients and on the degree of disruption of the evolutionary corona at the present epoch of the solar activity cycle. Among the first results are the discovery of frequent H-alpha emission from remnants of eruptive prominences in the outer corona and first observations of Fe XIV line emission to 3.2 solar radii. In the early stages of transients, cavities less dense than the ambient corona are occasionally found trailing the transient loops, with the loops being relatively thick and structureless. Some 22 transients have been identified in the initial survey of 52 days of observations; from this sample the preliminary conclusion is that transients during the SMM era (near solar maximum) occur over a wider range of latitude than, but with about the same range of speeds as, transients during the Skylab era (near solar minimum).

House, L. L.↗

Application of maximum-entropy spectral estimation to deconvolution of XPS data

A comparison is made between maximum-entropy spectral estimation and traditional methods of deconvolution used in electron spectroscopy. The maximum-entropy method is found to have higher resolution-enhancement capabilities and, if the broadening function is known, can be used with no adjustable parameters with a high degree of reliability. The method and its use in practice are briefly described, and a criterion is given for choosing the optimal order for the prediction filter based on the prediction-error power sequence. The method is demonstrated on a test case and applied to X-ray photoelectron spectra.

Vasquez, R. P.↗

Maximum likelihood estimation of label imperfection probabilities and its use in the identification of mislabeled patterns

Estimating label imperfections and the use of estimations in the identification of mislabeled patterns are discussed. Expressions are presented for the asymptotic variances of the probability of correct classification and proportion, and for the maximum likelihood estimates of classification errors and a priori probabilities. Models are developed for imperfections in the labels and classification errors, and expressions are derived for the probability of imperfect label identification schemes resulting in wrong decisions. The expressions are used in computing thresholds and the techniques are given practical applications. The imperfect label identification scheme in the multiclass case is found to amount to establishing a region around each decision surface, and decisions of the label correction scheme are found in close agreement with the analyst-interpreter interpretations of the imagery films. As an example, the application of the maximum likelihood estimation to the processing of Landsat MSS data is discussed.

Chittineni, C. B.↗

Monte Carlo studies of ocean wind vector measurements by SCATT: Objective criteria and maximum likelihood estimates for removal of aliases, and effects of cell size on accuracy of vector winds

The scatterometer on the National Oceanic Satellite System (NOSS) is studied by means of Monte Carlo techniques so as to determine the effect of two additional antennas for alias (or ambiguity) removal by means of an objective criteria technique and a normalized maximum likelihood estimator. Cells nominally 10 km by 10 km, 10 km by 50 km, and 50 km by 50 km are simulated for winds of 4, 8, 12 and 24 m/s and incidence angles of 29, 39, 47, and 53.5 deg for 15 deg changes in direction. The normalized maximum likelihood estimate (MLE) is correct a large part of the time, but the objective criterion technique is recommended as a reserve, and more quickly computed, procedure. Both methods for alias removal depend on the differences in the present model function at upwind and downwind. For 10 km by 10 km cells, it is found that the MLE method introduces a correlation between wind speed errors and aspect angle (wind direction) errors that can be as high as 0.8 or 0.9 and that the wind direction errors are unacceptably large, compared to those obtained for the SASS for similar assumptions.

Pierson, W. J.↗

Remote detection of the maximum altitude of equatorial ionospheric plasma bubbles

Nearly 200 post-sunset low-altitude passes of the Alouette 2 and ISIS 1 satellites near the dip equator are studied in order to find the maximum ionospheric plasma bubble altitudes, which are determined by calculating the apex altitude of the magnetic field line passing through the satellite when it is immersed in a bubble. The calculations are made only upon the observation of conjugate hemisphere ionospheric echoes, which result from ducted HF sounder signals that are guided along field-aligned irregularities within the plasma depletion. The maximum bubble altitudes corresponding to the three longitude sectors centered on zero deg, 75 deg W, and 105 deg E, are found to often exceed 1000 km, but seldom 3000 km. The electron density depletions within these field-aligned bubbles, as measured at the point of satellite encounter with the topside ionosphere, are generally less than a factor of two but may exceed a factor of ten.

Benson, R. F.↗

The use of prior probabilities in maximum likelihood classification of remotely sensed data

Possibilities for the improvement of classification accuracies by the use of prior information about the expected distribution of classes in the maximum likelihood classification of remote sensing data are examined. The modification of the maximum likelihood decision rule to take into account one or several sets of probabilities for the occurrence of classes which probabilities are based on independent knowledge of the area surveyed is demonstrated. It is then shown that the use of prior probabilities is sufficiently versatile so as to allow the prior weighting of output classes based on their anticipated sizes as well as the merging of continuously varying measurements with discrete collateral information data sets and the construction of time-sequential classification systems in which an earlier classification modifies the outcome of a latter one.

Strahler, A. H.↗

A global view of F-region electron density and temperature at solar maximum

It is pointed out that the thermal structure of the ionosphere represents a quasi-static balance between a variety of heat sources and sinks which vary spatially and temporally on a wide range of time scales. The present investigation has the objective to present selected early results from the Dynamics Explorer-2 (DE-2) Langmuir probe instrument and to make an initial evaluation of how the thermal structure of the ionosphere at solar maximum differs from that observed at solar minimum. Bowen et al. (1964) and Brace and Reddy (1965) devised early empirical models of the F region electron temperature (Te), based on satellite Langmuir probe measurements at low levels of solar activity. The global structure of Te and the electron density (Ne) obtained in the current investigation is not very different from that reported by Brace and Reddy. The primary difference at solar maximum is that Ne is everywhere much higher, but Te differs only in detail.

Brace, L. H.↗

Solar maximum mission: Ground support programs at the Harvard Radio Astronomy Station

Observations of the spectral characteristics of solar radio bursts were made with new dynamic spectrum analyzers of high sensitivity and high reliability, over the frequency range 25-580 MHz. The observations also covered the maximum period of the current solar cycle and the period of international cooperative programs designated as the Solar Maximum Year. Radio data on shock waves generated by solar flares were combined with optical data on coronal transients, taken with equipment on the SMM and other satellites, and then incorporated into computer models for the outward passage of fast-mode MHD shocks through the solar corona. The MHD models are non-linear, time-dependent and for the most recent models, quasi-three-dimensional. They examine the global response of the corona for different types of input pulses (thermal, magnetic, etc.) and for different magnetic topologies (for example, open and closed fields). Data on coronal shocks and high-velocity material ejected from solar flares have been interpreted in terms of a model consisting of three main velocity regimes.

Maxwell, A.↗

A low-power, high-throughput maximum-likelihood convolutional decoder chip for NASA's 30/20 GHz program

It is pointed out that the NASA 30/20 GHz program will place in geosynchronous orbit a technically advanced communication satellite which can process time-division multiple access (TDMA) information bursts with a data throughput in excess of 4 GBPS. To guarantee acceptable data quality during periods of signal attenuation it will be necessary to provide a significant forward error correction (FEC) capability. Convolutional decoding (utilizing the maximum-likelihood techniques) was identified as the most attractive FEC strategy. Design trade-offs regarding a maximum-likelihood convolutional decoder (MCD) in a single-chip CMOS implementation are discussed.

Mccallister, R. D.↗

Restricted maximum principles for elastic bodies

A maximum principle for the equilibrium of an elastic material body which is free of body forces is described not all of the components of the displacement vector or of the principal stresses can simultaneously have a strict maximum or minimum at any point in the body which does not be either on the surface or on a material interface.

Rose, M. E.↗

A recontoured, upper surface designed to increase the maximum lift coefficient of a modified NACA 65 (0.82) (9.9) airfoil section

A recontoured upper surface was designed to increase the maximum lift coefficient of a modified NACA 65 (0.82)(9.9) airfoil section which was tested at Mach numbers of 0.3 and 0.4 and Reynolds numbers of 2.3x10(6) and 4.3x10(6). The original 6-series section was tested for comparison with the recontoured section. The recontoured profile was found to have a higher maximum lift coefficient at all test conditions than the original airfoil. The recontoured airfoil showed less drag and nearly the same pitching moment characteristics as the original 6-series airfoil at all test conditions. The improvements found for the recontoured airfoil of the present study are similar to those found during previous investigations of recontoured 6-series airfoils with less camber.

Hicks, R. M.↗

Maximum likelihood estimation of turbulence spectrum parameters

Estimation of the integral scale and intensity of a generic turbulence record is treated as a statistical problem of parameter estimation. Properties of parameter estimators and the method of maximum likelihood are reviewed. Likelihood equations are derived for estimation of the integral scale and intensity applicable to a general class of turbulence spectra that includes the von Karman and Dryden transverse and longitudinal spectra as special cases. The method is extended to include the Bullen transverse and longitudinal spectra. Coefficients of variation are given for maximum likelihood estimates of the integral scale and intensity of the von Karman spectra. Application of the method is illustrated by estimating the integral scale and intensity of an atmospheric turbulence vertical velocity record assumed to be governed by the von Karman transverse spectrum.

Mark, W. D.↗

Application of thin-layer Navier-Stokes equations near maximum lift

The flowfield about a NACA 0012 airfoil at a Mach number of 0.3 and Reynolds number of 1 million is computed through an angle of attack range, up to 18 deg, corresponding to conditions up to and beyond the maximum lift coefficient. Results obtained using the compressible thin-layer Navier-Stokes equations are presented as well as results from the compressible Euler equations with and without a viscous coupling procedure. The applicability of each code is assessed and many thin-layer Navier-Stokes benchmark solutions are obtained which can be used for comparison with other codes intended for use at high angles of attack. Reasonable agreement of the Navier-Stokes code with experiment and the viscous-inviscid interaction code is obtained at moderate angles of attack. An unsteady solution is obtained with the thin-layer Navier-Stokes code at the highest angle of attack considered. The maximum lift coefficient is overpredicted, however, in comparison to experimental data, which is attributed to the presence of a laminar separation bubble near the leading edge not modeled in the computations. Two comparisons with experimental data are also presented at a higher Mach number.

Anderson, W. K.↗

Maximum-Likelihood Parameter-Estimation Algorithm

Efficient version of maximum-likelihood algorithm devised for calculating normal-mode frequencies and damping parameters of vibrating system from experimental data where both process noise and measurement noise present. Method applicable in vibration analysis of such complicated structures as vehicles, aircraft, and spacecraft. New algorithm simplification of existing maximum-likelihood formulation using Kalman filter that allows for both process and measurement noise.

Eldred, D. B.↗

More than you want to know about maximum likelihood estimation

The maximum likelihood estimator has been used to extract stability and control derivatives from flight data for many years. Most of the literature on aircraft estimation concentrates on new developments and applications, assuming familiarity with basic estimation concepts. Some of these basic concepts are presented. The maximum likelihood estimator is briefly discussed and the aircraft equations of motion that the estimator uses. The basic concepts of minimization and estimation are examined for a simple computed aircraft example. The cost functions that are to be minimized during estimation are defined and discussed. Graphic representations of the cost functions are given to help illustrate the minimization process. Finally, the basic concepts are generalized, and estimation from flight data is discussed. Some of the major conclusions for the computed example are also developed for the analysis of flight data.

Iliff, K. W.↗

Hydrostatic Bearing Pad Maximum Load and Overturning Conditions for the 70-meter Antenna

The reflector diameters of the 64-m antennas were increased to 70-m. In order to evaluate the minimum film thickness of the hydrostatic bearing which supports the antenna weight, it is first necessary to have a good estimation of the maximum operational load on the most heavily loaded bearing pad. The maximum hydrostatic bearing load is shown to be sufficiently small and the ratios of stabilizing to over turning moments are ample.

Mcginness, H. D.↗

Galactic cosmic ray radial gradients and the anomalous He component near maximum solar modulation and to radii beyond 34 AU from the Sun

Radial gradients for relativistic galactic cosmic rays (E 70 MeV) remained nearly constant at approx. 2.5%/AU from 1978-84, which includes the period of maximum solar modulation in 1981-82. For energies 30-70 MeV/n, gradients decreased at solar maximum to values of 1%/AU (protons) and 4%/AU (helium), and appear to be increasing again in 1983-84 toward the values found for solar minimum. The anomalous helium component has not reappeared, either at 1 AU or at Pioneer 10 at R 34 AU.

Mckibben, R. B.↗