Search NASA⌕ Search

SEARCH · Search NASA

Results for “Members”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Quantification of Saint-Venant's Principle for a General Prismatic Member

A semi-analytic finite element method for finding the decay rates of edge effects in anisotropic layered plates was extended to the treatment of prismatic members of an arbitrary cross section composed of any number of anisotropic elements. The displacement fields corresponding to the decay rates with positive real part were determined for a homogenous graphite/epoxy plate two units thick. The behavior of a rectangular beam is also considered.

Source record↗
NASA NTRS1987

Member vibration effects on LSS behavior

This paper evaluates the sensitivity of modal characteristics of large deployable lattice-type space structures to joint boundary conditions. The evaluation of joint rotational boundary conditions is accomplished by a review of modal strain energy among elements of the analytic dynamic model. This review shows that space structure designs having no bending energy in lattice members in the low frequency range are insensitive to joint rotational boundary conditions in that frequency range. Evaluation of joint translation boundary conditions is accomplished by the 'modal freeplay method' which is described in this paper. The modal freeplay method relates modal frequency to joint translational freeplay and to amplitude of applied forces.

White, Charles W.↗
NASA NTRS1989

Locating Damaged Members in a Truss Structure Using Modal Test Data: a Demonstration Experiment

On-orbit assessment of large flexible space truss structures can be accomplished, in principle, with dynamic response information, structural identification methods, and model correlation techniques which produce an adjusted mathematical model. In a previously developed approach for damage location, an optimal update of the structure model is formed using the response data, then examined to locate damaged members. An experiment designed to demonstrate and verify the performance of the on-orbit assessment approach uses a laboratory scale model truss structure which exhibits characteristics expected for large space truss structures. Vibration experiments were performed to generate response data for the damaged truss. The damage location approach, analytical work performed in support of the vibration tests, the measured response of the test article, and some preliminary results are described.

Smith, Suzanne Weaver↗
NASA NTRS1989

System identification test using active members

A modal test using active members as the excitation source has been performed on the Precision Truss. Using the step sine testing technique, the frequency response functions are obtained and the modal parameters are extracted by the curve-fitting method. Total of 10 global modes and 3 local modes are obtained. The results are compared with those obtained by the conventional external excitation test.

Chen, Jay-Chung↗
NASA NTRS1989

Locating damaged members in a truss structure using modal test data - A demonstration experiment

An experiment is designed to demonstrate and verify the performance of the on-orbit assessment approach for large flexible space truss structures. The on-orbit assessment approach can be accomplished, in principle, with dynamic response information, structural identification methods, and model correlation techniques which produce an adjusted mathematical model. An optimal update of the structure model is formed using the response data, then examined to locate damaged members. The experiment uses a laboratory scale model truss structure which exhibits characteristics expected for large space truss structures. Vibration experiments are performed to generate response data for the damaged truss. The damage location approach is described, as well as analytical work performed in support of the vibration tests, the measured response of the test article, and some preliminary results.

Smith, Suzanne Weaver↗
NASA NTRS1989

Experimental evaluation of active-member control of precision structures

The results of closed loop experiments that use piezoelectric active-members to control the flexible motion of a precision truss structure are described. These experiments are directed toward the development of high-performance structural systems as part of the Control/Structure Interaction (CSI) program at JPL. The focus of CSI activity at JPL is to develop the technology necessary to accurately control both the shape and vibration levels in the precision structures from which proposed large space-based observatories will be built. Structural error budgets for these types of structures will likely be in the sub-micron regime; optical tolerances will be even tighter. In order to achieve system level stability and local positioning at this level, it is generally expected that some form of active control will be required.

Fanson, James↗
NASA NTRS1989

Rotational velocities of newly discovered, low-mass members of the Alpha Persei cluster

About 30 new, low-mass members of the young open cluster Alpha Persei are identified via a proper-motion study and subsequent photometric and spectroscopic observations. Membership in the cluster is confirmed for a number of the fainter proper-motion candidates from Heckman, Dieckvoss, and Kox (1956). Coordinates, finding charts, BVRI photometry, and rotational velocities are provided for most of the stars. At least two of the stars show peculiar H-alpha emission profiles, with weak but very broad emission wings, and relatively narrow absorption reversals. The rotational velocity distribution for low-mass stars in the Alpha Per cluster are compared with recently derived rotational velocity distributions for T Tauri stars, placing strong constraints on the mechanisms for angular momentum loss during pre-main-sequence evolution.

Stauffer, John R.↗
NASA NTRS1990

On-orbit system identification using active members

The capability to perform accurate on-orbit system identification for both open loop (passive) and closed loop (active) structural systems will be required for future NASA missions; especially those missions which require large precision structures. The information is required to accurately establish the dynamic characteristics of the operational structure in order to adjust the structure itself using the concepts of Adaptive Structures and/or the control system. This paper presents the test results of using Active Members in an adaptive structural system to excite a free-free structure to determine both open and closed loop dynamic characteristics.

Kuo, C. P.↗
NASA NTRS1990

Analysis of elastically tailored viscoelastic damping member

For more than two decades, viscoelastic materials have been commonly used as a passive damping source in a variety of structures because of their high material loss factors. In most of the applications, viscoelastic materials are used either in series with or parallel to the structural load path. The latter is also known as the constrained-layer damping treatment. The advantage of the constrained-layer damping treatment is that it can be incorporated without loss in structural integrity, namely, stiffness and strength. However, the disadvantages are that: (1) it is not the most effective use of the viscoelastic material when compared with the series-type application, and (2) weight penalty from the stiff constraining layer requirement can be excessive. To overcome the disadvantages of the constrained-layer damping treatment, a new approach for using viscoelastic material in axial-type structural components, e.g., truss members, was studied in this investigation.

Chen, G.-S.↗
NASA NTRS1992

Vibration Testing Of Trusses By Use Of Active Members

Report describes experiments conducted to determine whether, in vibration tests of truss structure, active structural members can be used to excite test vibrations yielding accurate data on vibrational modes of structure. Results indicate accuracies equal or exceed those obtained from external-excitation tests.

Chen, Jay Chung↗
NASA NTRS1991

Crew member and instructor evaluations of line oriented flight training

Results obtained from the NASA/UT/LOFT survey of 8300 crew members from four airlines is presented. As simulator training is very expensive and excellence in training is the objective, some effort is justified in evaluating LOFT and in determining what it is about the best scenarios that creates positive effects. Attention is given to the effects of different scenarios, self reports of crew resource management behaviors, organization, fleet and crew position differences.

Wilhelm, John↗
NASA NTRS1993

Active Members Excite And Measure Vibrations In Trusses

Report describes experimental study of use of active structural members to excite and measure vibrations as small as microns in truss structure. Part of continuing effort to develop active vibration-suppressing control system adapting itself to changing and/or partly unknown dynamical characteristics of truss structure in outer space. Some aspects of control concept and potential terrestrial applications described in "Two Techniques For Suppressing Vibrations In Structures" (NPO-17889).

Kuo, Chin-Po↗
NASA NTRS1992

Troctolitic anorthosite from 77115: A magnesian member of the alkalic suite

Alkalic suite pristine nonmare rocks are distinctly enriched in plagiophile elements such as Na and K, as well as generally incompatible elements, despite modes and textures more characteristic of typical crustal cumulates (most commonly anorthosites) than of the basaltic KREEP rocks that appear to account for the bulk of the lunar crust's total complement of incompatible elements. Our studies indicate that the 77115 troctolitic clasts of Winzer et al. is actually a troctolitic anorthosite (or anorthositic troctolite), probably best classified as a member of the alkalic suite. We managed to obtain a thin section with pyroxene and olivine, and analyzed a 13.4-mg chip by instrumental neutron activation analysis (INAA). The results of this analysis are briefly discussed.

Warren, Paul H.↗
NASA NTRS1931

Comparison of weights of 17ST and steel tubular structural members used in aircraft construction

Although the strong aluminum alloys have proved themselves to be very efficient in aircraft construction there is a growing competition from the high-strength steels for certain parts, especially for tubular members. This tendency is being reflected in research work carried on at the Bureau of Standards. This study will be based largely on data given in Technical Note No. 307 of the NACA.

Hartmann, E C↗
NASA NTRS1937

Stability of structural members under axial load

The principles of the cross method of moment distribution are used to check the stability of structural members under axial load. A brief theoretical treatment of the subject, together with an illustrative problem, is included as well as a discussion of the reduced modulus at high stresses and a set of tables to aid in the solution of practical problems.

Lundquist, Eugene E↗
NASA NTRS1948

Shear Lag in a Plywood Sheet-stringer Combination Used for the Chord Member of a Box Beam

Theoretical and experimental investigations were made of the distribution of strains in a plywood sheet-stringer combination used as the chord member of a box beam acted upon by bending loads. The theoretical solution was obtained with the help of the principle of minimum potential energy and certain simplifying assumptions. Strain measurements were made on a build-up box beam by means of electrical-resistance strain gages connected with strain indicators. A very satisfactory agreement between the theoretical and experimental strains was obtained.

LOADS - BEAMS, BOX↗
NASA NTRS1925

The Influence of the Form of a Wooden Beam on Its Stiffness and Strength III : Stresses in Wood Members Subjected to Combined Column and Beam Action

The general purpose in this study was to determine the stresses in a wooden member subjected to combined beam and column action. What may be considered the specific purpose, as it relates more directly to the problem of design, was to determine the particular stress that obtains at maximum load which, for combined loading, does not occur simultaneously with maximum stress.

Newlin, J A↗
NASA NTRS1993

Search for extraterrestrial intelligence/high resolution microwave survey team member

This semiannual status report describes activities conducted by the Principal Investigator during the first half of this third year of the NASA High Resolution Microwave Survey (HRMS) Investigator Working Group (IWG). As a (HRMS) Team Member with primary interest in the Sky Survey activity, this investigator attended IWG meetings at NASA/Ames and U.C.-Santa Cruz in Apr. and Aug. 1992, and has traveled independently to NRAO/Kitt Peak, Arizona (April 1993) and Woodbury, Georgia (July 1993). During the July 1993 visit to the Georgia Tech Research Corporation/Woodbury Research Facility, an experiment was conducted to study the effects of interference from C-band (3.7 - 4.2 GHz) geostationary spacecraft on the Sky Survey operation in that band. At the first IWG meeting in April of this year, results of a SETI observation conducted at the 203 GHz positronium hyperfine resonance using the NRAO facility at Kitt Peak, AZ, were presented, as well as updates on the development of the spaceborne RFI data bases developed for the project. At the second meeting, results of the study of interference from C-band geostationary spacecraft were presented. Likewise, a presentation was made at the accompanying 1993 Bioastronomy Symposium describing the SETI observation at the positronium hyperfine resonance.

Steffes, Paul G.↗