Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal Ion Complexation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

S K-edge XAS of Cu Ⅱ , Cu Ⅰ , and Zn Ⅱ oxidized Dithiolene complexes: Covalent contributions to structure and the Jahn-Teller effect

We report reduced dithiolene ligands are bound to high valent Mo centers in the active site of the oxotransferase family of enzymes. Related model complexes have been studied with great insight by Prof. Holm and his colleagues. This study focuses on the other limit of dithiolene chemistry: an investigation of the 2-electron oxidized dithiolene bound to low-valent late transition metal (TM) ions (Zn II , Cu I , and Cu II ). The bonding descriptions of the oxidized dithiolene [N,N-dimethyl piperazine 2,3-dithione (Me 2 Dt 0 )] complexes are probed using S K-edge X-ray absorption spectroscopy (XAS) and the results are correlated to density functional theory (DFT) calculations. These experimentally supported calculations are then extended to explain the different geometric structures of the three complexes. The Zn II (Me 2 Dt 0 ) 2 complex has only ligand-ligand repulsion so it is stabilized at the D 2d symmetry limit. The Cu I (Me 2 Dt 0 ) 2 complex has additional weak backbonding thus distorts somewhat from D 2d toward D 2h symmetry. The Cu II (Me 2 Dt 0 ) 2 complex has a strong σ donor bond that leads to both a large Jahn-Teller stabilization to D 2h and an additional covalent contribution to the geometry. The combined strong stabilization results in the square planar, D 2h structure. This study quantifies the competition between the ligand-ligand repulsion and the change in electronic structures in determining the final geometric structures of the oxidized dithiolene complexes, and provides quantitative insights into the Jahn-Teller stabilization energy and its origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Self-Healable Sulfide/Polymer Composite Electrolyte for Long-Life, Low-Lithium-Excess Lithium-Metal Batteries

Solid electrolyte-protected lithium-metal anodes promise energy-dense, safe cells. While sulfide solid electrolytes enable facile processability and fast ion transport, they suffer from complex chemo-mechanical issues, including Li plating-induced fracture and Li stripping-induced contact loss. To address these issues, a grafting approach is implemented to functionalize the sulfide solid electrolyte (Li 3,85 Sn 0.85 Sb 0.15 S 4 ) with a self-healing unit. This leads to a dynamic bonding between the solid electrolyte network and a mechanically robust polymer scaffold, which reversibly accommodates the volume changes of the lithium-metal anode. Thus, the approach improves the interfacial contact between the lithium-metal anode and the composite electrolyte, enabling stable cycling at a mild stack pressure (160 kPa). With a negative to positive capacity ratio equals to 1, pouch full cells with a high-nickel cathode (nickel content > 90%) and lithium-metal anode display 92% capacity retention for 140 cycles. Engineering the interface between solid electrolyte and the polymeric binder offers a promising pathway to address the chemo-mechanical issues.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Selective scandium ion capture through coordination templating in a covalent organic framework

The use of coordination complexes within covalent organic frameworks can significantly diversify the structures and properties of this class of materials. In this report we combined coordination chemistry and reticular chemistry by preparing frameworks that consist of a ditopic (p-phenylenediamine) and mixed tritopic moieties-an organic ligand and a scandium coordination complex of similar sizes and geometries, both bearing terminal phenylamine groups. Changing the ratio of organic ligand to scandium complex enabled the preparation of a series of crystalline covalent organic frameworks with tunable levels of scandium incorporation. Removal of scandium from the material with the highest metal content subsequently resulted in a 'metal-imprinted' covalent organic framework that exhibits a high affinity and capacity for Sc 3+ ions in acidic environments and in the presence of competing metal ions. In particular, the selectivity of this framework for Sc 3+ over common impurity ions such as La 3+ and Fe 3+ surpasses that of existing scandium adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Regeneration of anion-exchange resins for cyclic selenium removal from industrial wastewaters

Application of ion exchange for the removal of selenium (Se) oxyanions from industrial wastewaters is often limited by ineffective regeneration of the ion-exchange resins, particularly in complex systems containing competing ions, such as coal-ash leachate containing high-sulfate concentrations and heavy metal ions. Here, in this study, it was first demonstrated that while conventional regeneration with sodium chloride (NaCl) is effective for simulated wastewater, with ∼80% efficiency, NaCl fails to regenerate resin loaded with real industrial wastewater, achieving less than 20% efficiency. To overcome this challenge, a two-step regeneration process was investigated using a sodium carbonate (Na 2 CO 3 ) solution for elution, followed by a NaCl solution for restoration. Compared to the one-step NaCl regeneration, this integrated process restored more than 80% of the resin's capacity with real industrial wastewaters. Beyond demonstrating regeneration performance, this research emphasizes fundamental mechanistic interpretations of the observed regeneration behavior across different water matrices and experimental conditions. Particularly, accounting for pH-dependent carbonate speciation, it is proposed that the elution step exploits the resin's strong affinity for divalent carbonate ions to displace strongly bound contaminants, while the subsequent restoration step relies mainly on the mass action effects of chloride ions to regenerate the resin sites. The protocol was optimized to achieve rapid regeneration (<10 min) using moderate chemical concentrations (0.5 M) in treating real leachate. In batch cyclic experiments, Se regeneration reached nearly complete recovery after five consecutive sorption and desorption cycles, while in the fixed-bed system, the regeneration efficiency remained at approximately 80% after five cycles.

Anion-exchange resin↗
DOE OSTI2020

Electron Redistribution within the Nitrogenase Active Site FeMo-cofactor During Reductive Elimination of H2 to Achieve N=N Triple-Bond Activation

Nitrogen fixation by nitrogenase begins with accumulation of four reducing equivalents at the active-site FeMo-cofactor (FeMo-co), generating a state (denoted E4(4H)) with two [Fe-H-Fe] bridging hydrides. Recently, photolytic reductive elimination (re) of the E4(4H) hydrides showed that enzymatic re of E4(4H) hydride yields an H2-bound complex (E4(H2,2H)), in a process corresponding to a formal 2-electron reduction of the metal-ion core of FeMo-co. The resulting electron-density redistribution from Fe-H bonds to the metal ions themselves enables N2 to bind with concomitant H2 release, a process illuminated here by QM/MM molecular dynamics simulations. What is the nature of this redistribution? Although E4(H2,2H) hasn’t been trapped, cryogenic photolysis of E4(4H) provides a means to address this question. Photolysis of E4(4H) causes hydride-re with release of H2, generating doubly-reduced FeMo-co (denoted E4(2H)*), the extreme limit of the electron-density redistribution upon formation of E4(H2,2H). Here we examine the doubly-reduced FeMo-co core of the E4(2H)* limiting-state by 1H, 57Fe, and 95Mo ENDOR to illuminate the partial electron-density redistribution upon E4(H2,2H) formation during catalysis, complementing these results with corresponding DFT computations. Inferences from the E4(2H)* ENDOR results as extended by DFT computations include: (i) the Mo-site participates negligibly, and overall it is unlikely that Mo changes valency throughout the catalytic cycle; (ii) two distinctive E4(4H) 57Fe signals are suggested as associated with ‘anchors’ of one bridging hydride, two others with anchors of the second, with NBO-analysis identifying one anchor of each hydride as a major recipient of electrons released upon breaking Fe-H bonds.

Lukoyanov, Dmitriy↗
DOE OSTI2021

New experimental approach to understanding the chemical reactivity of oxide surfaces

Metal oxides have been an attractive option for a range of applications, including hydrogen sensors, microelectronics, and catalysis, due to their reactivity and tunability. The properties of metal oxides can vary greatly on their precise surface structure; however, few surface science techniques can achieve atomistic-level determinations of surface structure, and fewer yet can do so for insulator surfaces. Low energy ion beam analysis offers a potential insulator-compatible solution to characterizing the surface structure of metal oxides. As a feasibility study, we apply low energy ion beam analysis to investigate the surface structure of a magnetite single crystal, Fe 3 O 4 (100). We obtain multi-angle maps using both forward-scattering low energy ion scattering (LEIS) and backscattering impact-collision ion scattering spectroscopy (ICISS). Both sets of experimental maps have intensity patterns that reflect the symmetries of the Fe 3 O 4 (100) surface structure. However, analytical interpretation of these intensity patterns to extract details of the surface structure is significantly more complex than previous LEIS and ICISS structural studies of one-component metal crystals, which had far more symmetries to exploit. To gain further insight into the surface structure, we model our experimental measurements with ion-trajectory tracing simulations using molecular dynamics. Our simulations provide a qualitative indication that our experimental measurements agree better with a subsurface cation vacancy model than a distorted bulk model.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nondestructively Visualizing and Understanding the Mechano-Electro-chemical Origins of “Soft Short” and “Creeping” in All-Solid-State Batteries

All-solid-state Li-metal batteries (ASLMBs) represent a significant breakthrough in the quest to overcome limitations associated with traditional Li-ion batteries, particularly in energy density and safety aspects. However, widespread implementation is stymied due to a lack of profound understanding of the complex mechano-electro-chemical behavior of Li metal in the ASLMBs. Herein, operando neutron imaging and X-ray computed tomography (XCT) are leveraged to nondestructively visualize Li behaviors within ASLMBs. This approach offers real-time observations of Li evolutions, both pre- and post- occurrence of a “soft short”. The coordination of 2D neutron radiography and 3D neutron tomography enables charting of the terrain of Li metal deformation operando. Concurrently, XCT offers a 3D insight into the internal structure of the battery following a “soft short”. Despite the manifestation of a “soft short”, the persistence of Faradaic processes is observed. To study the elusive “soft short”, phase field modeling is coupled with electrochemistry and solid mechanics theory. The research unravels how external pressure curbs dendrite growth, potentially leading to dendrite fractures and thus uncovering the origins of both “soft” and “hard” shorts in ASLMBs. Furthermore, by harnessing finite element modeling, it dive deeper into the mechanical deformation and the fluidity of Li metal.

25 ENERGY STORAGE↗
DOE OSTI2023

Rational design of stable functional metal–organic frameworks

Functional porous metal–organic frameworks (MOFs) have been explored for a number of potential applications in catalysis, chemical sensing, water capture, gas storage, and separation. MOFs are among the most promising candidates to address challenges facing our society related to energy and environment, but the successful implementation of functional porous MOF materials are contingent on their stability; therefore, the rational design of stable MOFs plays an important role towards the development of functional porous MOFs. In this Focus article, we summarize progress in the rational design and synthesis of stable MOFs with controllable pores and functionalities. The implementation of reticular chemistry allows for the rational top-down design of stable porous MOFs with targeted topological networks and pore structures from the pre-selected building blocks. We highlight the reticular synthesis and applications of stable MOFs: (1) MOFs based on high valent metal ions (e.g., Al 3+ , Cr 3+ , Fe 3+ , Ti 4+ and Zr 4+ ) and carboxylate ligands; (2) MOFs based on low valent metal ions (e.g., Ni 2+ , Cu 2+ , and Zn 2+ ) and azolate linkers. We envision that the synthetic strategies, including modulated synthesis and post-synthetic modification, can potentially be extended to other more complex systems like metal-phosphonate framework materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ion Transport in Batteries with Polymer Electrolytes

We discuss polymer electrolytes for use in rechargeable lithium batteries. Polymer electrolytes have the potential to enable batteries with lithium metal anodes. These batteries have significantly higher theoretical energy densities than current lithium-ion batteries. We consider binary mixtures of polymers and salts. We also cover more complex systems such as polymer electrolytes swollen with a solvent (gel polymer electrolytes) and microphase separated polymer electrolytes. By covalently attaching the anions to the chains in a polymer solid, one obtains a single-ion conductor. We mainly focus on experiments wherein the polymer electrolyte is placed between two lithium metal electrodes. These experiments enable the determination of three transport parameters, ionic conductivity, salt diffusion coefficient, and transference number, and the thermodynamic factor. The properties of dry polymer electrolytes are contrasted with those of gel polymer electrolytes. The gel systems exhibit higher conductivity while the dry systems exhibit superior mechanical properties. We discuss interfacial impedance when lithium metal is contacted with polymer electrolytes and the importance of coulombic efficiency.

Yu, Xiaopeng↗
DOE OSTI2025

An unusual Co–S bond links B 12 chaperones in an interprotein complex

Chaperones in trafficking pathways ensure specificity of transition metal loading and protection against adventitious side reactions. In B 12 , an essential cofactor for humans, a cobalt ion is coordinated to a >1.3 kDa tetrapyrrolic scaffold, posing logistical challenges for its translocation. In this study, we report the 3.4 Å crystal structure of the human MMACHC and MMADHC B 12 chaperones, tethered via a rarely seen covalent cobalt–sulfur bond. B 12 is bound in the base-off state to MMACHC, with Cys-261 on MMADHC serving as the upper axial ligand; the lower-axial position is vacant. The propensity of thiolato-cobalamin derivatives bound to MMACHC to undergo spontaneous decomposition via general acid catalysis or reduction/oxidation chemistry is averted in the interprotein complex with MMADHC. An exposed face in the complex suggests an exit route for B 12 . No known clinical variants localize to the interprotein interface, consistent with the cobalt–sulfur bond being key to forming the high-affinity complex.

Science & Technology - Other Topics↗
DOE OSTI2025

Alkali Counterion-Dependent Crystallization of Uranium(IV)–Chloro Structural Units

The synthesis, structural characterization, and spectroscopic properties of five tetravalent uranium (U) phases including Li 6 [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ]·10H 2 O (1), [U(H 2 O) 4 Cl 4 ] (2), [U(H 2 O) 4 Cl 4 ]·KCl (3), Rb 2 UCl 6 (4), and Cs 2 UCl 6 (5) are reported. Notably, a change in the U 4+ solid-state structural unit was observed based on the identity of the alkali counterion used in the synthesis. Li 1+ yielded a tetranuclear oxo-bridged cluster, [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ] 6– , Na 1+ and K 1+ yielded two structurally distinct [U(H 2 O) 4 Cl 4 ] complexes, and Rb 1+ and Cs 1+ resulted in [UCl 6 ] 2– as the dominant phases. The spectroscopic properties of the compounds were analyzed using Raman and UV–vis–NIR absorption spectroscopy. The UV–vis–NIR spectra of compounds 1–5 exhibited transitions consistent with uranium in the +4 oxidation state. Clear differences in the absorption band splitting were observed and are likely attributed to differences in metal ion coordination, crystal field effects, and outer sphere interactions Overall, this work demonstrates the utility of noncovalent interactions in tuning the crystallization of various metal complexes from otherwise identical reaction solutions and provides further evidence that counterions impact the composition and structure of actinide complexes isolated in the solid state. In this way, this work affords important insight into directing and controlling the structure of actinide complexes and clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

M IV /Co –I (M = Zr, Hf) Bis(phosphinoamide) Complexes with η 6 - and η 4 -Arenes

Despite their relevance to catalysis, low-/subvalent cobalt complexes are difficult to synthesize and isolate. Consequently, very few “cobaltate” complexes are known and there is a lack of architectural diversity in this field. Lewis acidic d 0 group IV metals have been demonstrated to stabilize Co –I centers via metal–metal bonds. Herein, we report the synthesis of bis(phosphinoamide) heterobimetallic M IV /Co –I arene complexes (M = Zr, Hf). The driving force to maintain the aromaticity of the arenes dictates the hapticity of the Co-bound arene ligands and influences the binding arrangement of the phosphinoamide ligands. Benzene and toluene were observed to bind η 6 to the Co –I center, forcing dissociation of one of the phosphinoamide ligands, whereas η 4 -coordination of anthracene allows both phosphinoamide ligands to remain bound to the Co center. The identity of both the arene and the group IV metal ion starkly influence the lability of the arene. For instance, the Co-bound benzene ligand in the Zr IV /Co –I benzene complex rapidly exchanges with C 6 D 6 in solution, whereas toluene/C 6 D 6 exchange is much slower and appreciable C 6 H 6 /C 6 D 6 exchange is not observed for the Hf analogue. The Zr IV /Co –I benzene complex loses benzene upon repeated exposure to vacuum to form an arene-free tetrametallic dimer.

aromatic compounds↗
DOE OSTI2022

Correlation between Redox Potential and Solvation Structure in Biphasic Electrolytes for Li Metal Batteries

The activity of lithium ions in electrolytes depends on their solvation structures. However, the understanding of changes in Li + activity is still elusive in terms of interactions between lithium ions and solvent molecules. Herein, the chelating effect of lithium ion by forming [Li(15C5)] + gives rise to a decrease in Li + activity, leading to the negative potential shift of Li metal anode. Moreover, weakly solvating lithium ions in ionic liquids, such as [Li(TFSI) 2 ] - (TFSI = bis(trifluoromethanesulfonyl)imide), increase in Li + activity, resulting in the positive potential shift of LiFePO 4 cathode. This allows the development of innovative high energy density Li metal batteries, such as 3.8 V class Li | LiFePO 4 cells, along with introducing stable biphasic electrolytes. In addition, correlation between Li + activity, cell potential shift, and Li + solvation structure is investigated by comparing solvated Li + ions with carbonate solvents, chelated Li + ions with cyclic and linear ethers, and weakly solvating Li + ions in ionic liquids. These findings elucidate a broader understanding of the complex origin of Li + activity and provide an opportunity to achieve high energy density lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Hydrometallurgical Recycling of Black Mass of Spent Lithium-Ion Batteries Using Methanesulfonic Acid: Leaching, Kinetic Studies, and Potential for Total Recovery of Valuable Components

Methanesulfonic acid (MSA) exhibits several advantageous properties rendering it a promising candidate for circular hydrometallurgical processes. These properties include a high acidity (pKa = - 1.9) comparable to that of classical mineral acids as well as biodegradability, high stability, and high solubility of metal-MSA complexes in aqueous solutions. In this study, MSA was employed as a lixiviant for the leaching of metals (lithium, nickel, cobalt, and manganese) from the black mass of spent lithium-ion batteries (LIBs). The effect of various parameters, including MSA concentration, H 2 O 2 concentration, temperature, and pulp density, was systematically investigated. Under the optimized conditions (1.5 M MSA, 0.2 M H 2 O 2 , 60 °C, and 50 g/L pulp density), quantitative leaching of lithium was achieved within 30 min, while for nickel and cobalt it was after 2 h, and 4 h for manganese leaching. The leaching kinetics of Li, Ni, Co, and Mn were studies using the shrinking particle models (SPM) and the Avrami model. The results indicated that the Avrami model provided the best fit to the kinetic data, with apparent activation energies of 46.81 kJ/mol for Li, 58.61 kJ/mol for Ni, 59.69 kJ/mol for Co, and 58.86 kJ/mol for Mn, within the temperature range of 25-70 °C (except for Li, which was analyzed in the range of 25-60 °C), consistent with chemical reaction control. Subsequently, residual contaminants in the leaching residue were eliminated through pyrolysis. The quantitative leaching of metals in MSA solution (a green lixiviant), combined with the pyrolytic treatment of leaching residues, represents a circular strategy for the total recovery of valuable components from the black mass of spent LIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

New amphiphilic complexes with luminescent rare-earth ions

Organic compounds containing luminous rare-earth ions are of interest for numerous nanophotonic and plasmonic applications, including nanoscale lasers, biosensors, and optical magnetism studies. Optical studies of Eu 3+ complexes revealed that ultra-thin LB monolayers are highly luminescent even when deposited directly on plasmonic metal, which makes these materials very promising for plasmonic applications and studies, including control and enhancement of magnetic dipole emission with a plasmonic environment. In this work, we synthesize amphiphilic complexes with various rare-earth ions Nd 3+ , Yb 3+ , and DPT ligands and show that they all are suitable for monolayer or multilayer deposition with the Langmuir–Blodgett (LB) technique. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2021

Controlling Infrared Plasmon Resonances in Inverse-Spinel Cadmium Stannate Nanocrystals via Site-Selective Cation-Exchange Reactions

Doped metal oxide nanocrystals (NCs) exhibit tunable localized surface plasmon resonances (LSPRs) in the infrared spectral region. Compared to the binary oxides commonly studied, plasmonic NCs derived from ternary oxides remain far less explored primarily due to the difficulty of controlling NC phase-purity and stoichiometry. Here, we report the synthesis of inverse spinel-type cadmium stannate (Cd 2 SnO 4 ) NCs, for which cation-exchange reactions were developed to tailor their composition and LSPR properties. X-ray absorption spectroscopy studies revealed that the inequivalent tetrahedrally and octahedrally coordinated Cd 2+ can be selectively exchanged for Cu + and In 3+ ions, respectively, enabling broadband tunable LSPR and Cu-mediated cation-exchange with lanthanide ions that are otherwise difficult to incorporate. Here, our work paves the way for systematic compositional engineering to accelerate the design of complex metal oxide NCs with emerging plasmonic, electronic, and magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Gas-Phase Stability of Large Lanthanide:Ligand Clusters Evaluated Using Collision-Induced Dissociation

Introduction In the reprocessing of f-elements present in used nuclear fuels, a variety of diglycolamides (DGA’s) are used as extractants for actinide partitioning. In particular, the Actinide-Lanthanide Separation (ALSEP) process typically utilizes either the N,N,N’,N’-tetraoctyl diglycolamide (TODGA) or N,N,N',N'-tetra-2-ethylhexyl diglycolamide (T2EHDGA) extractant ligands following the partitioning of uranium and plutonium from used nuclear fuel. To better understand fundamental interactions in these processes, covalent bonding of several f-elements with diglycolamides, primarily TODGA, is investigated in the gas phase using nanospray ionization and a quadrupole time-of-flight mass spectrometer. Further, analysis of the identity and relative strength of the cluster is enabled by MS2 isolation and collision induced dissociation. Methods Metal ion cluster analysis was completed using a Bruker (Billerica, MA, USA) mircOTOF-Q II quadrupole time-of-flight mass spectrometer with a CaptiveSpray nanospray ion source. Detection was accomplished using positive ionization mode. Metal: ligand solutions were assembled as 30 µM europium nitrate, samarium nitrate, cerium nitrate, or holmium nitrate and 3 µM DGA in acetonitrile or a 50:50 mixture of acetonitrile: isopropanol. Preliminary data The samarium cluster experiments yielded clusters with a samarium:TODGA ratio of up to 1:7 able to be isolated and evidence of greater ratios present in the mass spectrum. This is surprising, as metal clusters are not expected to have a coordination space able to accommodate this many TODGA ligands, due to its size and tridenticity. Collisional activation of [Sm(TODGA)3]3+ suggested loss of a TODGA radical cation, in addition to ligand fragmentation. In contrast, activation of clusters with higher Sm:TODGA ratios resulted in loss of entire ligands, with no evidence of fragmentation. A lower collision energy was required to remove ligands as the number of bound TODGAs increased, suggesting that in larger clusters, ligands are more delicately complexed to the metal. In addition, several clusters were observed with the composition [Sm(NO3)x(TODGA)n x]+3 x. With a single nitrate ion, clusters with up to six TODGAs were able to be isolated. In a similar pattern to the samarium clusters containing only TODGA, less collision energy was required to eliminate one or more TODGAs with increasing size. Clusters with composition [Sm(NO3)(TODGA)n-1]2+ appeared in lower abundance and were more collisionally stable than [Sm(TODGA)n]3+ clusters. With two nitrate ions, only clusters with a single TODGA were able to be isolated. Analogous europium experiments resulted in similar clusters. Ratios of up to 1:7 Eu:TODGA and clusters with one nitrate and up to five TODGAs were isolated. In clusters with two nitrate ions, only one or two TODGAs were observed to be bound. Similar to samarium, MS2 experiments with the Eu clusters suggested that larger clusters required less collision energy to eliminate TODGA. Europium clusters with the composition [Eu(NO3)(TODGA)n-1]2+ were observed in greater abundance and with greater stability than the equivalent cluster with the composition [Eu(TODGA)n]3+. Novel Aspect These are the first reported Ln:TODGA clusters, allowing us to begin to investigate intrinsic complexation of lanthanides with process-relevant ligands.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Mosaic Cu I −Cu II −In III 2D Perovskites: Pressure‐Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method

Abstract The perovskite (BA) 4 [Cu II (Cu I In III ) 0.5 ]Cl 8 ( 1 BA ; BA + =butylammonium) allows us to study the high‐pressure structural, optical, and transport properties of a mixed‐valence 2D perovskite. Compressing 1 BA reduces the onset energy of Cu I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1 BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu II perovskites achieve similar conductivity at ≈50 GPa. The solution‐state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. To circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu II single perovskites and Cu I In III double perovskites.

Li, Jiayi↗