Search NASA⌕ Search

SEARCH · Search NASA

Results for “MnO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Rechargeable Aluminum-Ion Batteries

This chapter reports on the development of rechargeable aluminum-ion batteries. A possible concept of rechargeable aluminum/aluminum-ion battery based on low-cost, earth-abundant Al anode, ionic liquid EMImCl:AlCl3 (1-ethyl-3-methyl imidazolium chloroaluminate) electrolytes and MnO2 cathode has been proposed. Al anode has been reported to show good reversibility in acid melts. However, due to the problems in demonstrating the reversibility in cathodes, alternate battery cathodes and battery concepts have also been presented. New ionic liquid electrolytes for reversible Al dissolution and deposition are needed in the future for replacing corrosive EMImCl:AlCl3 electrolytes.

Paranthaman, Mariappan Parans↗

Stabilized birnessite cathode for high power and high energy density applications

A battery comprises a housing, an electrolyte disposed in the housing, an anode disposed in the housing, a stabilized cathode disposed in the housing and comprising a cathode material. The cathode material comprises a composition selected from birnessite or layered-polymorph of manganese dioxide (δ-MnO2), the composition being stabilized by bismuth and copper ions, a conductive carbon, and a binder. The anode can be at least 50% (m/m) lithium, magnesium, aluminum, or zinc.

Yadav, Gautam G.↗

Ultrahigh-Loading Manganese-Based Electrodes for Aqueous Batteries via Polymorph Tuning

Manganese-based aqueous batteries utilizing Mn 2+ /MnO 2 redox reactions are promising choices for grid-scale energy storage due to their high theoretical specific capacity, high power capability, low-cost, and intrinsic safety with water-based electrolytes. However, the application of such systems is hindered by the insulating nature of deposited MnO 2 , resulting in low normalized areal loading (0.005–0.05 mAh cm -2 ) during the charge/discharge cycle. Here, in this work, the electrochemical performance of various MnO 2 polymorphs in Mn 2+ /MnO 2 redox reactions is investigated, and ε-MnO 2 with low conductivity is determined to be the primary electrochemically deposited phase in normal acidic aqueous electrolyte. It is found that increasing the temperature can change the deposited phase from ε-MnO 2 with low conductivity to γ-MnO 2 with two order of magnitude increase in conductivity. It is demonstrated that the highly conductive γ-MnO 2 can be effectively exploited for ultrahigh areal loading electrode, and a normalized areal loading of 33 mAh cm -2 is achieved. At a mild temperature of 50 °C, cells are cycled with an ultrahigh areal loading of 20 mAh cm -2 (1–2 orders of magnitude higher than previous studies) for over 200 cycles with only 13% capacity loss.

25 ENERGY STORAGE↗

High-Energy and Stable Subfreezing Aqueous Zn–MnO 2 Batteries with Selective and Pseudocapacitive Zn-Ion Insertion in MnO 2

One major challenge of aqueous Zn–MnO 2 batteries for practical applications is their unacceptable performance below freezing temperatures. Here, in this study, the use of simple Zn(ClO 4 ) 2 aqueous electrolytes is described for all-weather Zn–MnO 2 batteries even down to -60 °C. The symmetric, bulky ClO 4 - anion effectively disrupts hydrogen bonds between water molecules and provides intrinsic ion diffusion even while frozen, and enables ≈260 mAh g -1 on MnO 2 cathodes at -30 °C . It is identified that subfreezing cycling shifts the reaction mechanism on the MnO 2 cathode from unstable H+ insertion to predominantly pseudocapacitive Zn 2+ insertion, which converts MnO 2 nanofibers into complicated zincated MnO x that are largely disordered and appeared as crumpled paper sheets. The Zn 2+ insertion at -30 °C is faster and much more stable than at 20 °C, and delivers ≈80% capacity retention for 1000 cycles without Mn 2+ additives. In addition, simple Zn(ClO 4 ) 2 electrolyte also enables a nearly fully reversible and dendrite-free Zn anode at -30 °C with ≈98% Coulombic efficiency. Zn–MnO 2 prototypes with an experimentally verified unit energy density of 148 Wh kg -1 at a negative-to-positive ratio of 1.5 and an electrolyte-to-capacity ratio of 2.0 are further demonstrated.

25 ENERGY STORAGE↗

Atomistic Insights of Irreversible Li + Intercalation in MnO 2 Electrode

Tunnel-structured MnO 2 represents open-framed electrode materials for reversible energy storage. Its wide application is limited by its poor cycling stability, whose structural origin is unclear. We tracked the structure evolution of β-MnO 2 upon Li + ion insertion/extraction by combining advanced in situ diagnostic tools at both electrode level (synchrotron X-ray scattering) and single-particle level (transmission electron microscopy). The instability is found to originate from a partially reversible phase transition between β-MnO 2 and orthorhombic LiMnO 2 upon lithiation, causing cycling capacity decay. Moreover, the MnO 2 /LiMnO 2 interface exhibits multiple arrow-headed disordered regions, which severely chop into the host and undermine its structural integrity. Our findings could account for the cycling instability of tunnel-structured materials, based on which future strategies should focus on tuning the charge transport kinetics toward performance enhancement.

25 ENERGY STORAGE↗

Rational optimization of substituted α–MnO 2 cathode for aqueous zinc–ion battery

Density functional theory (DFT) is utilized to explore the effects of increasing concentrations of vanadium (V) and chromium (Cr) substitution on the discharge of α-MnO 2 cathode in hydrated zinc-ion batteries (ZIBs). During H + -intercalation and Zn 2+ -intercalation, Cr-substitution proves to be more effective than V-substitution in promoting discharge behaviors. Transitioning from Mn 0.875 Cr 0.125 O 2 , Mn 0.75 Cr 0.25 O 2 to Mn 0.625 Cr 0.375 O 2 is found to consistently enhance the discharge voltage, along with improved tunnel structure retention and volume expansion suppression. In comparison, the promoting effect of increasing V-substitution is relatively small at initial discharge stages and leads to degradation at later stages, primarily due to an increased concentration of unstable Mn 2+ ion. The superior effect of Cr-substitution is attributed to the unique atomic and electronic structures of substituted Cr 4+ and reduced Cr 3+ ions during discharge. These ions serve as active electron acceptors to limit the formation of Mn 3+ and Mn 2+ ions, and as anchors to stabilize the α-MnO 2 framework and intercalated H + /Zn 2+ ions, respectively. Finally, our study highlights fine-tuning through substitution to enhance the performance of α-MnO 2 -based cathode materials in ZIBs.

25 ENERGY STORAGE↗

Stable Low-Current Electrodeposition of α-MnO 2 on Superaligned Electrospun Carbon Nanofibers for High-Performance Energy Storage

Metal oxide/carbonaceous nanomaterials are promising candidates for energy-storage applications. Yet, inhomogeneous mass and charge transfer across the electrode/electrolyte interface due to unstable metal oxide/carbonaceous nanomaterial synthesis limit their performance in supercapacitors. Here, it is shown that the above problems can be mitigated through stable low-current electrodeposition of MnO 2 on superaligned electrospun carbon nanofibers (ECNFs). The key to this method is coupling a self-designed four steel poles collector for aligned ECNFs and a constant lowcurrent (40 μA) electrodeposition technique to form a uniform Na + -induced α-MnO 2 film which proceeds by a time-dependent growth mechanism involving cluster-“kebab” structures and ending with a compact, uniform MnO 2 film for high-performance energy storage.

36 MATERIALS SCIENCE↗

1-D NiO nanorods pillared 2-D MnO 2 nanosheets as lithium-free cathode materials for charged-state lithium batteries

Theoretically monolayer MnO 2 sheets have an impressive high capacity of 616 mAh/g, but practically monolayer MnO 2 sheets have poor performances due partially to monolayer restacking. In this paper, we report the preparation of three-dimensional porous NiO nanorod pillared δ-MnO 2 nanosheets as integrated nanoarchitectures as lithium-free cathode materials. The as-synthesized NiO pillared δ-MnO 2 nanosheets have resulted in a moderately high specific capacity of 185 mA h g –1 , with more than 63% capacity retention after 200 cycles. In comparison, 2D MnO 2 nanosheets without NiO pillared structures only achieved a low initial capacity of 137 mA h g –1 , with just 17% capacity retention after 200 cycles. The dramatically improved electrochemical performances could be attributed to high surface areas with excellent porosity which provides more electrochemically active sites and thermodynamically favorable insertion pathways for the lithium ions. Furthermore, our results reveal that insertion of pillars is a promising strategy to explore in order to mitigate the restacking issues and achieve electrochemical performances close to theoretical values for monolayer MnO 2 .

25 ENERGY STORAGE↗

A comprehensive study on two types of supercapacitor composite electrodes comprising MnO 2 and activated carbon nanofibers: Self-supporting membrane and ground powder

Manganese dioxide (MnO 2 )@carbon composites have been attractively considered as electrode materials for supercapacitors (SCs) due to synergistic effects. This work systematically investigated the structure of MnO 2 @carbon nanofiber (CNF) composite electrodes with the different forms of CNFs and the corresponding electrochemical performance of SCs. In brief, novel activated carbon nanofibers were first fabricated by electrospinning the hydroxyl-containing poly(amic acid) solution, and then the preferred CNF material was decorated by MnO 2 crystals in the form of self-supporting membrane and ground powders, respectively. Additionally, the synthesis parameters were investigated and optimized based on the electrochemical performance of SCs. The results reveal that the powdered composite electrode exhibits a higher specific surface area of 501 m 2 g –1 compared to the self-supporting membrane composite electrode under the same conditions, resulting in a promising specific capacity of 214.1 mAh g –1 (770.8 Fg –1 ) in 6M KOH solution at 0.5 A g –1 . In addition, the capacitance of the symmetrical SC device assembled by G-HMC-1:3–80 reaches 179.8 Fg –1 , coupled with an energy density of 24.86 Whkg –1 at 230 Wkg –1 power density. This work provides valuable hints for designing SC composite electrode materials with outstanding performance.

25 ENERGY STORAGE↗

Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO 2 Loading

Retaining sound electrochemical performance of electrodes at high mass loading holds critical importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO 2 ) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. However, this is only achievable with very small mass loading of active material typically less than 1 mg cm -2 . Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. In this work, we demonstrate a 3D printed graphene aerogel electrode with MnO 2 loading of 182.2 mg cm -2 , which achieves a record-high areal capacitance of 44.13 F cm -2 . Most importantly, this 3D printed graphene aerogel/MnO 2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.

36 MATERIALS SCIENCE↗

Calorimetry can detect the early onset of hydrolysis in hybrid supercapacitors with aqueous electrolytes

This study investigates the effect of cation species on the onset of electrolyte hydrolysis in hybrid supercapacitors with aqueous electrolytes using isothermal operando calorimetry. The cells consisted of a positive α-MnO 2 cryptomelane electrode and a negative activated carbon (AC) electrode with either 0.5 M K 2 SO 4 or 0.5 M Cs 2 SO 4 aqueous electrolytes. They were characterized using cyclic voltammetry and galvanostatic cycling. In addition, the instantaneous heat generation rate at each electrode was measured using a custom isothermal operando calorimeter. Heat generation associated with resistive losses (Joule heating) and reversible ion adsorption/desorption was clearly identified. For larger potential windows, an endothermic dip, attributed to the onset of hydrolysis, was observed at the positive α-MnO 2 electrode where K + and Cs + ions engaged in fast surface redox reactions. Interestingly, this endothermic dip appeared at 1.8 V and 2.0 V for K 2 SO 4 and Cs 2 SO 4 aqueous electrolytes, respectively. The difference in the stable operating potential window was attributed to thinner solvation shell around Cs + cation than for K + thus reducing the amount of water present near the electrodes as ions partially shed their solvation shells during adsorption. The early onset of hydrolysis could be observed by isothermal operando calorimetry before it could be observed with conventional electrochemical methods.

42 ENGINEERING↗

The effects of vanadium substitution on one-dimensional tunnel structures of cryptomelane: Combined TEM and DFT study

Rational design of energy storage materials requires mechanistic understanding which relies on atomic scale characterization of structure and defects. In this paper we utilize vanadium (V)-substituted one-dimensional cryptomelane as a model material to study structural features critical to electrochemical reversibility of the cathode in lithium-ion batteries. We found the substitution of manganese (Mn) atoms in the tunnel wall with V enhances structural uniformity in the parent KMn 8 O 16 material by inhibiting formation of irregular (2 × 3 and 2 × 1) manganese oxide tunnel structures. Upon lithiation, both transmission electron microscopy (TEM) and density functional theory (DFT) reveal significant structural evolution, eventually resulting in phase separation and formation of highly reduced manganese oxide. During this process, Mn 4+ accepts electrons donated by intercalated Li, while the V 4+ substituent is not electrochemically reduced but acts to stabilize the tunnel framework structure. As a result, the V substituted material shows higher operating voltage and improved electrochemical reversibility. Our results highlight the benefits of V-substitution in cryptomelane, and the significance of integrating characterization with simulation for understanding and developing design principles for lithium ion battery materials.

25 ENERGY STORAGE↗

Mn(III)-mediated bisphenol a degradation: Mechanisms and products

Bisphenol A (BPA) is a high production volume chemical with potential estrogenic effects susceptible to abiotic degradation by MnO 2 . BPA transformation products and reaction mechanisms with MnO 2 have been investigated, but detailed process understanding of Mn(III)-mediated degradation has not been attained. Rapid consumption of BPA occurred in batch reaction vessels with 1 mM Mn(III) and 63.9 ± 0.7% of 1.76 ± 0.02 μmol BPA was degraded in 1 hour at circumneutral pH. BPA was consumed at 1.86 ± 0.09-fold higher rates in vessels with synthetic MnO 2 comprising approximately 13 mol% surface-associated Mn(III) versus surface-Mn(III)-free MnO 2 , and 10–35% of BPA transformation could be attributed to Mn(III) during the initial 10-min reaction phase. High-resolution tandem mass spectrometry (HRMS/MS) analysis detected eight transformation intermediates in reactions with Mn(III), and quantum calculations proposed 14 BPA degradation products, nine of which had not been observed during MnO 2 -mediated BPA degradation, suggesting mechanistic differences between Mn(III)- versus MnO 2 -mediated BPA degradation. Finally, the findings demonstrate that both Mn(III) and Mn(IV) can effectively degrade BPA and indicate that surface-associated Mn(III) increases the reactivity of synthetic MnO 2 , offering opportunities for engineering more reactive oxidized Mn species for BPA removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Charge Storage Mechanism of a Pseudocapacitive MnO 2 Electrode Using in Operando Raman Spectroscopy

Although manganese oxide (MnO 2 ) has been extensively studied as an electrode material for pseudocapacitors, a clear understanding of its charge storage mechanism is still lacking. Here we report our findings in probing the structural changes of a thin-film model MnO 2 electrode during cycling using in operando Raman spectroscopy. The spectral features (e.g., band position, intensity, and width) are correlated quantitatively with the size (Li + , Na + , and K + ) of cations in different electrolytes and with the degree of discharge to gain better understanding of the cation-incorporation mechanism into the interlayers of pseudocapacitive MnO 2 . Also, theoretical calculations of phonon energy associated with the models of interlayer cation-incorporated MnO 2 agree with the experimental observations of cation-size effect on the positions of Raman bands. Additionally, the cation-size effects on spectral features at different potentials of MnO 2 electrode are correlated quantitatively with the amount of charge stored in the MnO 2 electrode. The understanding of the structural changes associated with charge storage gained from Raman spectroscopy provides valuable insights into the cation-size effects on the electrochemical performances of the MnO 2 electrode.

36 MATERIALS SCIENCE↗

Degradation of Adsorbed Bisphenol A by Soluble Mn(III)

Bisphenol A (BPA), a high production volume chemical and potential endocrine disruptor, is found to be associated with sediments and soils due to its hydrophobicity (log K OW of 3.42). Here, we used superfine powdered activated carbon (SPAC) with a particle size of 1.38 ± 0.03 μm as a BPA sorbent and assessed degradation of BPA by oxidized manganese (Mn) species. SPAC strongly sorbed BPA, and desorption required organic solvents. No degradation of adsorbed BPA (278.7 ± 0.6 mg BPA g –1 SPAC) was observed with synthetic, solid α-MnO 2 with a particle size of 15.41 ± 1.35 μm; however, 89% mass reduction occurred following the addition of 0.5 mM soluble Mn(III). Small-angle neutron scattering data suggested that both adsorption and degradation of BPA occurred in SPAC pores. The findings demonstrate that Mn(III) mediates oxidative transformation of dissolved and adsorbed BPA, the latter observation challenging the paradigm that contaminant desorption and diffusion out of pore structures are required steps for degradation. Soluble Mn(III) is abundant near oxic-anoxic interfaces, and the observation that adsorbed BPA is susceptible to degradation has implications for predicting, and possibly managing, the fate and longevity of BPA in environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discharging Behavior of Hollandite α-MnO 2 in a Hydrated Zinc-Ion Battery

Hollandite, α-MnO 2 , is of interest as a prospective cathode material for hydrated zinc ion batteries (ZIBs); however, the mechanistic understanding of the discharge process remains limited. Herein, a systematic study on the initial discharge of α-MnO 2 cathode under hydrated environment was reported using density functional theory (DFT) in combination with complementary experiments, where the DFT predictions well described the experimental measurements on discharge voltages and manganese oxidation states. According to the DFT calculations, both protons (H + ) and zinc ions (Zn 2+ ) contribute to the discharging potentials of α-MnO 2 observed experimentally, where the presence of water plays an essential role during the process. This study provides valuable insights into the mechanistic understanding of the discharge of α-MnO 2 in hydrated ZIBs, emphasizing the crucial interplay among the H 2 O molecules, the intercalated Zn 2+ or H + ions, and the Mn 4+ ions on the tunnel wall to enhance the stability of discharged states and, thus, the electrochemical performances in hydrated ZIBs.

25 ENERGY STORAGE↗

Electrolyte Effect on the Electrochemical Performance of Mild Aqueous Zinc-Electrolytic Manganese Dioxide Batteries

Recently, mild aqueous rechargeable Zn-MnO 2 batteries have attracted increasing interest for energy storage due to the appealing attributes of low cost of Zn and Mn resource and high safety and environmental benignity. Despite extensive types of MnO 2 have been proposed for cathodes, the different reported performance, complex synthesis methods and lacking a thorough understanding of reactions in MnO 2 cathodes greatly hinder their practical applications for long life energy storage. Here we demonstrate the low cost and commercially available electrolytic manganese dioxide (EMD) as a promising and reversible cathode for mild aqueous rechargeable Zn-MnO 2 batteries through a rational manipulation of redox reactions in EMD cathode. In optimal Zn(TFSI)2-based electrolyte, the EMD cathode exhibits a mixed diffusion controlled conversation relation between EMD and H + and diffusion-free pseudocapacitance-like reactions without phase change. This mechanism enables EMD cathode with excellent cycling stability over 5000 cycles with a capacity retention of 94%. This study provides new opportunity to develop mild aqueous Zn-MnO 2 batteries with low cost and high-performance cathode materials by a rational control of the reaction mechanisms.

25 ENERGY STORAGE↗