Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Dependence of red edge on eddy viscosity model parameters

The dependence of the red edge location on the two fundamental free parameters in the eddy viscosity treatment was extensively studied. It is found that the convective flux is rather insensitive to any reasonable or allowed value of the two free parameters of the treatment. This must be due in part to the fact that the convective flux is determined more by the properties of the hydrogen ionization region than by differences in convective structure. The changes in the effective temperature of the red edge of the RR Lyrae gap resulting from these parameter variations is quite small (approximately 150 K). This is true both because the parameter variation causes only small changes and because large changes in the convective flux are required to produce any significant change in red edge location. The possible changes found are substantially less than the approximately 600 K required to change the predicted helium abundance mass fraction from 0.3 to 0.2.

Deupree, R. G.↗
NASA NTRS1981

A study of model parameters associated with the urban climate using HCMM data

The use of infrared and visible data from the Heat Capacity Mapping Mission (HCMM) and in situ data to study the intensity of the urban heat island of Saint Louis is described. Analysis of HCMM data shows that an urban heat island exists day and night in all seasons when clear skies prevail. The lower albedo value of the urban region during the day suggests that the higher temperatures are due to more absorption of solar radiation. Preliminary analysis of in situ meteorological data was performed after merging with HCMM data, and surface roughness, the exchange coefficient, and the soil moisture were calculated.

Source record↗
NASA NTRS1982

Modeling parameter influences on MHD swirl combustion nozzle design

Attention is given to a research project which has the goal to develop a two-stage slagging gasifier-combustor in the form of a high-intensity combustor, taking into account a suitable aerodynamic design of the second stage nozzle which will prevent the separation of the boundary layer as the flow turns from axial to radial direction. The specific objectives of the present investigation are to test the effect of various second-stage nozzle geometries, flow rates, swirl number, and distribution in the first and second stages upon the corresponding flowfield in the second stage. Special emphasis is given to the avoidance of boundary layer separation as the flow turns from axial to radial direction into the MHD disk generator.

Lilley, D. G.↗
NASA NTRS1990

A simple two-system-parameter model for surface-effected warming of the planetary boundary layer

The transabsorptivity concept which specifies the heat input into the PBL resulting from surface-atmosphere interactions is discussed. This concept is examined in terms of governing equations, and transabsorptivity is defined as the product of the surface absorptivity and the transfer efficiency. It is proposed that the climatic effects of surface changes be formulated in terms of changes in the transabsorptivity. A diagram of the surface-atmosphere interactions is provided.

Otterman, J.↗
NASA NTRS1991

Two-parameter model of total solar irradiance variation over the solar cycle

Total solar irradiance measured by the SMM/ACRIM radiometer is modelled from the Photometric Sunspot Index and the Mg II core-to-wing ratio with multiple regression analysis. Considering that the formation of the Mg II line is very similar to that of the Ca II K line, the Mg II core-to-wing ratio, measured by the Nimbus-7 and NOAA9 satellites, is used as a proxy for the bright magnetic elements, including faculae and the magnetic network. It is shown that the relationship between the variations in total solar irradiance and the above solar activity indices depends upon the phase of the solar cycle. Thus, a better fit between total irradiance and its model estimates can be achieved if the irradiance models are calculated for the declining portion and minimum of solar cycle 21, and the rising portion of solar cycle 22, respectively. There is an indication that during the rising portion of solar cycle 22, similar to the maximum time of solar cycle 21, the modelled total irradiance values underestimate the measured values. This suggests that there is an asymmetry in the long-term total irradiance variability.

Pap, Judit M.↗
NASA NTRS1994

Distributed parameter modeling of repeated truss structures

A new approach to find homogeneous models for beam-like repeated flexible structures is proposed which conceptually involves two steps. The first step involves the approximation of 3-D non-homogeneous model by a 1-D periodic beam model. The structure is modeled as a 3-D non-homogeneous continuum. The displacement field is approximated by Taylor series expansion. Then, the cross sectional mass and stiffness matrices are obtained by energy equivalence using their additive properties. Due to the repeated nature of the flexible bodies, the mass, and stiffness matrices are also periodic. This procedure is systematic and requires less dynamics detail. The first step involves the homogenization from a 1-D periodic beam model to a 1-D homogeneous beam model. The periodic beam model is homogenized into an equivalent homogeneous beam model using the additive property of compliance along the generic axis. The major departure from previous approaches in literature is using compliance instead of stiffness in homogenization. An obvious justification is that the stiffness is additive at each cross section but not along the generic axis. The homogenized model preserves many properties of the original periodic model.

Wang, Han-Ching↗
NASA NTRS1995

Certification of a hybrid parameter model of the fully flexible Shuttle Remote Manipulator System

The development of high fidelity models of mechanical systems with flexible components is in flux. Many working models of these devices assume the elastic motion is small and can be superimposed on the overall rigid body motion. A drawback associated with this type of modeling technique is that it is required to regenerate the linear modal model of the device if the elastic motion is sufficiently far from the base rigid motion. An advantage to this type of modeling is that it uses NASTRAN modal data which is the NASA standard means of modal information exchange. A disadvantage to the linear modeling is that it fails to accurately represent large motion of the system, unless constant modal updates are performed. In this study, which is a continuation of a project started last year, the drawback of the currently used modal snapshot modeling technique is addressed in a rigorous fashion by novel and easily applied means.

Barhorst, Alan A.↗
NASA NTRS2008

Errors in Sounding of the Atmosphere Using Broadband Emission Radiometry (SABER) Kinetic Temperature Caused by Non-Local Thermodynamic Equilibrium Model Parameters

The vast set of near global and continuous atmospheric measurements made by the SABER instrument since 2002, including daytime and nighttime kinetic temperature (T(sub k)) from 20 to 105 km, is available to the scientific community. The temperature is retrieved from SABER measurements of the atmospheric 15 micron CO2 limb emission. This emission separates from local thermodynamic equilibrium (LTE) conditions in the rarefied mesosphere and thermosphere, making it necessary to consider the CO2 vibrational state non-LTE populations in the retrieval algorithm above 70 km. Those populations depend on kinetic parameters describing the rate at which energy exchange between atmospheric molecules take place, but some of these collisional rates are not well known. We consider current uncertainties in the rates of quenching of CO2 (v2 ) by N2 , O2 and O, and the CO2 (v2 ) vibrational-vibrational exchange to estimate their impact on SABER T(sub k) for different atmospheric conditions. The T(sub k) is more sensitive to the uncertainty in the latter two and their effects depend on altitude. The T(sub k) combined systematic error due to non-LTE kinetic parameters does not exceed +/- 1.5 K below 95 km and +/- 4-5 K at 100 km for most latitudes and seasons (except for polar summer) if the Tk profile does not have pronounced vertical structure. The error is +/- 3 K at 80 km, +/- 6 K at 84 km and +/- 18 K at 100 km under the less favourable polar summer conditions. For strong temperature inversion layers, the errors reach +/- 3 K at 82 km and +/- 8 K at 90 km. This particularly affects tide amplitude estimates, with errors of up to +/- 3 K.

Garcia-Comas, Maya↗
NASA NTRS2011

Impact of Material and Architecture Model Parameters on the Failure of Woven Ceramic Matrix Composites (CMCs) via the Multiscale Generalized Method of Cells

It is well known that failure of a material is a locally driven event. In the case of ceramic matrix composites (CMCs), significant variations in the microstructure of the composite exist and their significance on both deformation and life response need to be assessed. Examples of these variations include changes in the fiber tow shape, tow shifting/nesting and voids within and between tows. In the present work, the effects of many of these architectural parameters and material scatter of woven ceramic composite properties at the macroscale (woven RUC) will be studied to assess their sensitivity. The recently developed Multiscale Generalized Method of Cells methodology is used to determine the overall deformation response, proportional elastic limit (first matrix cracking), and failure under tensile loading conditions. The macroscale responses investigated illustrate the effect of architectural and material parameters on a single RUC representing a five harness satin weave fabric. Results shows that the most critical architectural parameter is weave void shape and content with other parameters being less in severity. Variation of the matrix material properties was also studied to illustrate the influence of the material variability on the overall features of the composite stress-strain response.

Liu, Kuang C.↗
NASA NTRS2008

Estimation of Nutation Time Constant Model Parameters for On-Axis Spinning Spacecraft

Calculating an accurate nutation time constant for a spinning spacecraft is an important step for ensuring mission success. Spacecraft nutation is caused by energy dissipation about the spin axis. Propellant slosh in the spacecraft fuel tanks is the primary source for this dissipation and can be simulated using a forced motion spin table. Mechanical analogs, such as pendulums and rotors, are typically used to simulate propellant slosh. A strong desire exists for an automated method to determine these analog parameters. The method presented accomplishes this task by using a MATLAB Simulink/SimMechanics based simulation that utilizes the Parameter Estimation Tool.

Schlee, Keith↗