Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Carbon-sequestration gradient insulation composites

The massive use of carbon-sequestration building materials promises a potential global carbon sink in decarbonizing the building industry. Renewable biogenic materials from abundant agriculture waste for building practice have been around over thousands of years. However, in addition to their flammability and moisture problems, addressing their low thermal and structural performance is also becoming indispensable and urgent when it comes to environmentally sustainable and energy-efficient buildings. Here, we report a nature-inspired biogenic gradient insulation composite with an optimized silica concentration of 30 wt %, a density of 0.246 g/cm 3 , and a porosity of 86%. The gradient hybrid composite exhibits a thermal conductivity of 28.2 mW m -1 K -1 , which is the lowest achieved under optimal preparation conditions. Here, it also shows a flexural modulus of 590 MPa for the aerogel-rich layer without surface modification, and it demonstrates superior fire retardancy and superhydrophobicity after surface treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Chemocatalytic Route to Stereoregular Poly(3-hydroxyhexanoate) and Its Statistical and Tri-Block Copolymers

Poly(3-hydroxyhexanoate) (P3HHx)-based poly(3- hydroxyalkanoate)s (PHAs) are biologically produced, commercially implemented PHAs, but little is known in the open literature about the structure and property characterizations of discrete, authentic homopolymer P3HHx, and its copolymers with poly(3- hydroxybutyrate) (P3HB). Here, we introduce a chemocatalytic route to stereoregular (both isotactic and syndiotactic) P3HHx and PHA copolymers with P3HB, including statistical copolymer P3HBHx with various levels of 3HHx incorporation and discrete hard−soft−hard triblock copolymer P3HB-b-P3HHx-b-P3HB, and present extensive characterizations of their structures, thermal properties, and mechanical performance. The synthesis is efficiently achieved by one-pot polymerization of eight-membered di(n-propyl) and dimethyl (for copolymerization) diolides catalyzed by chiral molecular catalysts. Notably, P3HBHx can be rapidly produced in quantitative yield and exhibits high molar mass (M n up to 551 kg/mol) as well as both high modulus (up to 1.39 GPa) and ductility (up to 445%), while P3HB-b-P3HHx-b-P3HB further extends application temperature windows by possessing a unique combination of low T g (−18 °C) and high T m (154 °C) values. These findings highlight the stereomicrostructural and architectural versatility of chemocatalytic routes to PHAs, which, in turn, can be utilized to largely tune the PHA thermal properties and mechanical performance.

Biopolymers↗
DOE OSTI2024

Correlated Displacement of Dynamic Elastic Dipoles Produces Nonclassical Electrostriction in Zr-Doped Ceria

By combining experimental data with density functional theory-based ab initio molecular dynamics modeling, this work provides evidence that nonclassical electrostriction in isovalent Zr-doped ceria is due to the correlated anharmonic motion of dynamic elastic dipoles associated with multiple [ZrO 8 ]-local bonding units with a high Zr concentration (Zr 0.1 Ce 0.9 O 2 ). Introduction of 0.5 mol % trivalent or divalent codopants (Sc, Yb, La, or Ca) reduces the longitudinal electrostriction strain coefficient by more than a factor of 10, produces a 3-fold decrease in the relative dielectric permittivity, and increases the elastic modulus. Since these changes depend neither on the radius nor on the valency of the codopant, we conclude that the responsible species are charge-compensating oxygen vacancies (VO). For trivalent dopants (Do 0.005 Zr 0.1 Ce 0.895 O 1.9975 ), oxygen vacancies are present at a concentration ratio 1:40 with respect to Zr, giving, for random distribution, a characteristic interaction distance of ≤2.3 unit cells (1.2 nm). Oxygen vacancies participate in [ZrO 7 -V O ] local bonding units, disrupting the correlated dynamic displacements of the connected [ZrO 8 ]-local bonding units. Finally, such correlated motion of dynamic elastic dipoles may also explain the exponential increase in the longitudinal electrostriction strain coefficient with an increase in Zr concentration to <0.2 mole fraction and must be taken into account for further development of nonclassical electrostrictors based on Zr-doped ceria.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-Pressure Phase Transition of Metastable Wurtzite-Like CuInSe 2 Nanocrystals

Ternary I–III–VI 2 semiconductors, such as CuInSe 2 , exhibit diverse polymorphs with unique structural characteristics and optoelectronic properties. This study investigates the pressure-induced phase transitions of metastable wurtzite-like CuInSe 2 nanocrystals. Using a combination of synchrotron X-ray diffraction, pair distribution function analysis, and density functional theory calculations, we reveal a transition from cation-ordered wurtzite-like (Pmc2 1 ) to cation-disordered NaCl-like (Fm3̅m) structures at 7.7 GPa. The cation-disordered NaCl-like phase persists upon decompression. Bulk modulus calculations highlight size-dependent deviations from bulk material behavior. These findings deepen our understanding of phase stability in colloidal I–III–VI 2 semiconductor nanocrystals, with implications for tailoring functional materials under extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anion and Cation Size Effects on Viscoelasticity and Ion Transport of Imine Vitrimer Electrolytes

Vitrimers are a subclass of covalent adaptable networks where bond exchange occurs without breaking, thereby offering polymer materials with enhanced mechanical strength, thermal stability, and reprocessability compared to conventional electrolytes. Despite recent progress, we lack a complete understanding of the role of ions in controlling the physical and chemical properties of vitrimers. In this work, we study how different salts affect the viscoelasticity, morphology, and ionic conductivity of imine vitrimers. Our results show that addition of salt decreases relaxation times at elevated temperatures due to the catalytic effect of the cations, with smaller cations leading to faster relaxation. However, the activation energy for terminal relaxation increases with smaller cation size. This apparent discrepancy is attributed to the complex interplay among bond exchange kinetics, chain diffusion, and salt dissociation. Anions act as plasticizers by reducing the shear modulus, except lithium bromide. Ionic conductivity increases with larger anions due to smaller salt dissociation energies, whereas the cation type has a minor impact as polymer segmental dynamics dominate ionic transport. Imine-based vitrimers are reprocessable and recyclable, maintaining original mechanical properties and ionic conductivity after recovery. Mixed salt vitrimers exhibited tunable viscoelasticity and ionic conductivity intermediate to the analogous pure salt systems. Altogether, this work highlights the role of salt in the dynamic and conductive properties of imine vitrimers.

Anions↗
DOE OSTI2026

Pressure-Driven Helium Insertion for Structural Stability of CH 3 NH 3 PbBr 3 Hybrid Perovskites

Organic−inorganic metal halide perovskites (MHPs) have garnered significant attention due to their outstanding performance in optoelectronic devices, but they are prone to degradation through a variety of pathways. High-pressure studies are being used to understand the mechanical and structural stability of MHPs and investigate new methods for improving these. In this study, we map the high-pressure, low-temperature structural phase diagram of CH 3 NH 3 PbBr 3 (MAPbBr 3 ) between 15−300 K and up to 1.5 GPa. We first compare the temperature and pressure effects on the global and local structures of MAPbBr 3 using synchrotron X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS), respectively, and find evidence of PbBr 6 octahedral distortion. Our results also suggest that He inserts into the MAPbBr 3 structure. The thermodynamics of He insertion into MAPBHe x are calculated to be plausible at room temperature for x ≤ 1 and P = 1−3 GPa and shown to stabilize higher-symmetry phases. This phenomenon increases the fitted bulk modulus of MAPbBr 3 . Structural stabilization by inert atom insertion is proposed as a method to improve the mechanical robustness of MHPs and other soft hybrid materials.

Diffraction↗
DOE OSTI2025

Deciphering the Scattering of Mechanically Driven Polymers Using Deep Learning

Here, we present a deep learning approach for analyzing two-dimensional scattering data of semiflexible polymers under external forces. In our framework, scattering functions are compressed into a three-dimensional latent space using a Variational Autoencoder (VAE), and two converter networks establish a bidirectional mapping between the polymer parameters (bending modulus, stretching force, and steady shear) and the scattering functions. The training data are generated using off-lattice Monte Carlo simulations to avoid the orientational bias inherent in lattice models, ensuring robust sampling of polymer conformations. The feasibility of this bidirectional mapping is demonstrated by the organized distribution of polymer parameters in the latent space. By integrating the converter networks with the VAE, we obtain a generator that produces scattering functions from given polymer parameters and an inferrer that directly extracts polymer parameters from scattering data. While the generator can be utilized in a traditional least-squares fitting procedure, the inferrer produces comparable results in a single pass and operates 3 orders of magnitude faster. This approach offers a scalable automated tool for polymer scattering analysis and provides a promising foundation for extending the method to other scattering models, experimental validation, and the study of time-dependent scattering data.

Ding, Lijie [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2024

Medium-Range Structural Order as the Driver of Activated Dynamics and Complexity Reduction in Glass-Forming Liquids

Here, we analyze in depth the Elastically Collective Nonlinear Langevin Equation theory of activated dynamics in metastable liquids to establish that the predicted inter-relationships between the alpha relaxation time, local cage and collective elastic barriers, dynamic localization length, and shear modulus are causally related within the theory to the medium range order (MRO) static correlation length. The latter grows exponentially with density for metastable hard sphere fluids and as a nonuniversal inverse power law with temperature for supercooled liquids under isobaric conditions. The physical origin of predicted connections between the alpha time and other metrics of cage order and the thermodynamic inverse dimensionless compressibility is fully established. It is discovered that although kinetic constraints from the real space first coordination shell are important for the alpha time, they are of secondary importance compared to the consequences of the more universal MRO correlations in both the modestly and deeply metastable regimes. This understanding sheds new light on the theoretical basis for, and prior successes of, the predictive mapping of chemically complex thermal liquids to effective hard sphere fluids based on matching their dimensionless compressibilities, a scheme we call “complexity reduction”. In essence, the latter is equivalent to the physical requirement that the thermal liquid MRO correlation equals that of its effective hard sphere analog. The mapping alone is shown to provide a remarkable level of quantitative predictive power for the glass transition temperature T g of 21 molecular and polymer liquids. Predictions for the chemically specific absolute magnitude and growth with cooling of the MRO correlation length are obtained and lie in the window of 2–6 nm at T g . Dynamic heterogeneity, elastic facilitation, and beyond pair structure issues are briefly discussed. Future opportunities to theoretically analyze the equilibrated deep glass regime are outlined.

cancer↗
DOE OSTI2024

Synthesis and Properties of the Helium Clathrate and Defect Perovskite [He 2– x $^\square$ x ][CaNb]F 6

The defect double perovskite [He 2– x $^\square$ x ][CaNb]F 6 , with helium on its A-site, can be prepared by the insertion of helium into ReO 3 -type CaNbF 6 at high pressure. Upon cooling from 300 to 100 K under 0.4 GPa helium, ~60% of the A-sites become occupied. Helium uptake was quantified by both neutron powder diffraction and gas insertion and release measurements. After the conversion of gauge pressure to fugacity, the uptake of helium by CaNbF 6 can be described by a Langmuir isotherm. The enthalpy of absorption for helium in [He 2– x $^\square$ x ][CaNb]F 6 is estimated to be ~+3(1) kJ mol –1 , implying that its formation is entropically favored. Helium is able to diffuse through the material on a time scale of minutes at temperatures down to ~150 K but is trapped at 100 K and below. The insertion of helium into CaNbF 6 reduces the magnitude of its negative thermal expansion, increases the bulk modulus, and modifies its phase behavior. On compressing pristine CaNbF 6 , at 50 and 100 K, a cubic (Fm$\overline{3}$m) to rhombohedral (R$\overline{3}$) phase transition was observed at <0.20 GPa. However, a helium-containing sample remained cubic at 0.4 GPa and 50 K. CaNbF 6 , compressed in helium at room temperature, remained cubic to >3.7 GPa, the limit of our X-ray diffraction measurements, in contrast to prior reports that upon compression in a nonpenetrating medium, a phase transition is detected at ~0.4 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stabilization of Preternatural Barium Oxidation States as an Unexpected Byproduct of β-Decay: Discovery of a New Halide Semiconductor Alloy

137 Cs has a wide range of roles in the nuclear industry. The solid material, safely encapsulated in CsCl as 137 CsCl, is stored as fission product waste from nuclear power production and legacy waste from nuclear weapons production; it has also served as a radiation source in food and sewage irradiators as well as medical devices. However, because of the solubility of the chloride salt and the relatively high specific activity of 137 Cs, damaged or broken capsules can lead to severe radiological accidents. Safe capsule design and material recycling are complicated by the unclear structural evolution during β-decay, which remains ambiguous due to the differing oxidation states of Cs (1+) and Ba (2+). Here, in this study, we use first-principles calculations to investigate the evolving structure–property relationships of Cs 1–x Ba x Cl during β-decay. Despite the well-established 2+ formal oxidation state of alkali-earth metals, we find that Ba 1+ can be stabilized in the form of a mixed-valence alloy at low concentrations. Specifically, we identify three regimes for the β-decay of 137 Cs into CsCl: Ba-doped CsCl (Ba ≤ 14%), wherein Ba has the expected 2+ oxidation state; Cs–Ba–Cl alloys, where Ba has a mix of the usual Ba 2+ and highly unusual Ba 1+ oxidation state in the form of a quasi-disordered mixed-valence alloy (Ba = 25%); and phase separation into a CsCl + BaCl 2 + Ba (m) mechanical mixture, where Ba reverts to its expected 2+ oxidation state (Ba > 25%). Surprisingly, the Cs 0.75 Ba 0.25 Cl mixed-valence alloy is a narrow indirect band gap semiconductor (1.05 eV) despite the insulating nature of both CsCl and BaCl 2 . It also exhibits strongly excitonic polarized optical properties, has glass-like ultralow thermal conductivity (directional average of 0.21 W/mK at 300 K), and shows greater resistance to deformation under both tensile and volumetric strengths compared with the original CsCl structure (e.g., shear and Young’s modulus of 9.04 and 31.62 GPa, respectively). These findings imply that transmutation of 137 Cs leads to highly unusual chemical bonding that stabilizes Ba 1+ in local regions of the quasi-disordered Cs 0.25 Ba 0.75 Cl, resulting in anomalous physical properties. Moreover, this discovery provides valuable insight for safe nuclear waste capsule design, which can aid in preventing environmental or human exposure to radioactive materials.

Fuhr, Addis S. [Oak Ridge National Laboratory (ORN↗
DOE OSTI2026

Coupled Chemical and Mechanical Control of Phase Stability in Lanthanide-Substituted BiVO 4

Doping is widely used to enhance the photoelectrochemical performance of BiVO 4 , yet solubility limits and polymorphic stability constrain compositional tuning. Here, in this study, the role of trivalent cation substitution (Ln = La, Nd, Dy, Ho, Y) on pressure-induced phase transformations in Bi 1–x Ln x VO 4 (x ≤ 0.5) is described. Powder X-ray and neutron diffraction reveal that increasing Ln content stabilizes the tetragonal zircon-type polymorph under ambient conditions, while applied pressures of up to ∼5 GPa promote conversion to the monoclinic fergusonite-type polymorph. In-situ neutron diffraction on Bi 0.8 La 0.2 VO 4 shows a reversible monoclinic to tetragonal transition near 2–3 GPa with a bulk modulus of 147 GPa. The extent of conversion depends strongly on dopant identity, concentration, and synthetic route, with mixed-phase solid-state samples converting more efficiently than phase-pure coprecipitated materials. These results demonstrate pressure as a viable pathway to access metastable, doped BiVO 4 compositions beyond conventional solubility limits.

Sypkes, Kathryn I. [University of Sydney, NSW (Aus↗
DOE OSTI2026

Promotion of CaCO 3 Nucleation by Carboxyl- and Amine-Terminated Peptoid Nanotubes

The use of surfaces to promote heterogeneous nucleation of CaCO 3 has been extensively studied to better understand natural processes of biomineralization, to develop bioinspired approaches for synthesizing composite materials with diverse functionalities, and as a route toward accelerating CO 2 mineralization. Peptoids have emerged as a material of particular interest, because they offer tunable side chain chemistry while maintaining a constant long-range self-assembled architecture. Here, in this work, we investigate the ability of films of self-assembled -NH 2 and −COOH terminated peptoid nanotubes to promote the nucleation of CaCO 3 . Using a combination of atomic force, scanning electron, and optical microscopy, we find that interwoven films of nanotubes formed from peptoids with -NH 2 side chains promote the preferential formation of vaterite with the (001) plane parallel to the film and exhibit a lower interfacial energy than that reported for inorganic surfaces. In contrast, the film of −COOH-functionalized peptoid nanotubes is a much stronger promoter, giving a particle density 5 orders of magnitude larger than for the -NH 2 terminated peptoid nanotubes and enabling complete coverage of individual peptoid tubes with CaCO 3 nanoparticles that results in a composite material with a 50-fold increase in Young’s modulus. Thus, interwoven films of peptoid nanotubes provide a useful platform for investigating the impact of specific chemical groups on nucleation and offer potential application to accelerated mineralization of CO 2 for removal from the environment or modulation of mineralogy and properties of carbonate-based building materials.

carbon nanotubes↗
DOE OSTI2024

Hydroesterification of Polycyclooctene to Access Linear Ethylene Ethyl Acrylate Copolymers as a Step Toward Polyolefin Functionalization

To advance a strategy of polymer-to-polymer upcycling of waste polyolefin by dehydrogenation then functionalization, we report successful hydroesterification of polycyclooctene (PCOE), an analogue for partially unsaturated polyethylene. Here, we convert PCOE to a linear analog for poly(ethylene-co-ethyl acrylate) (EEA) across a range of ethyl acrylate incorporations (0 to 18 mol % of ethylene units). The ester incorporation was well controlled by reaction time, and the remaining C=C bonds were subsequently hydrogenated. Here, the bulky ethyl acrylate groups did not incorporate into orthorhombic PE crystals, decreasing the crystallinity, crystallite size, and melting temperature with increasing functionalization. Additionally, hydroesterification tuned the dynamic mechanical properties, decreasing both the glass transition temperature and the storage modulus in the rubbery regime with greater functionalization. The linear EEA analogs reported here achieve remarkable extensibility (strain > 4000%) and high toughness, comparable to commercial random and branched EEA. Ultimately, we demonstrate successful conversion of an analogue to dehydrogenated PE to a linear EEA with favorable mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Incorporation of Thioacetate Pendants on a Polyalkenamer Enables High Extensibility

This study focuses on functionalizing polycyclooctene (PCOE) with thioacetate groups using thiol–ene click chemistry. The ethylene thioacetate (EVSA) copolymers produced vary in thioacetate incorporation (4–25 mol %) via a controlled semibatch addition technique with AIBN dosing. Copolymers with 4–14 mol % thioacetate are semicrystalline, while those with 20–25 mol % are amorphous. Increased functionalization correlates with decreased crystallinity and increased stretchability, with the highest functionalization (25 mol %) showing a modulus of 0.045 MPa and 2000% elongation at break. Here, this behavior is due to the pseudoprecise functionalization of the thioacetate pendants and intrinsic cross-linking that occurs during melt processing. Broadband dielectric spectroscopy (BDS) indicates a low activation energy barrier (16 kJ/mol for the β process), suggesting potential self-healing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Renewable Lactam Monomer for Tunable and Processable Polyamides

Replacement of petroleum-derived monomers with renewable alternatives is an integral part of the sustainable polymer framework. Research in this area involves the search for bio-based or recycled starting materials for traditional polymers, as well as investigations into new materials accessible from renewable feedstocks. Focusing on the latter, we studied the properties of polyamides synthesized from γ-methyl-ε-caprolactam through anionic ring-opening polymerization by an activated monomer mechanism. Here, the amorphous homopolymer presents high stiffness (Young’s modulus, ≈3 GPa), strength (stress at break, ≈80 MPa) and toughness under dry (low humidity) conditions, high ductility (strain at break, ≈1100%) in humid environments, optical clarity, and excellent processability due to its non-crystallizable nature and solubility in common organic solvents. Copolymerization with ε-caprolactam allows tailoring the mechanical properties and crystallinity in the resultant copolymers and provides new opportunities for advanced manufacturing and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding Viscoelasticity of an Entangled Silicone Copolymer via Coarse-Grained Molecular Dynamics Simulations

Entangled dynamics is important for understanding rheological properties of long-chain polymers. For entangled homopolymers, the classic tube-reptation model and its refinements have been successfully applied to quantify properties like diffusion coefficient and zero-rate viscosity. However, the application of such models to copolymers has been limited despite scientific and industrial importance. Here, we study the entangled melt dynamics of poly(dimethyl-co-diphenyl)siloxane random copolymer for a range of mean-composition-ratio ϕ of the diphenyl component via long-term molecular dynamics simulation with a recently developed coarse-grained model. We found that the segmental relaxation is heterogeneous at the monomeric level because of compositional fluctuations. However, at the chain-entanglement level and higher length scales, the viscoelastic response is homogeneous with compositional dependence only through the overall diphenyl fraction ϕ. The relaxation modulus of the entangled copolymer melt conforms to the Likhtman–McLeish model, and the viscosity predicted using our current coarse-grained parameters is in good quantitative agreement with experimental data.

Copolymers↗
DOE OSTI2026

Nonlocal Effect of Percolated Particle Networks on Viscoelasticity of Polymer–Filler Nanocomposites: A Mesoscale Simulation Study

With nanoparticles (NPs) as fillers, polymer nanocomposites (PNCs) usually exhibit enhanced mechanical properties. However, a direct connection between the microscopic structural relaxation and macroscopic mechanical properties of PNCs remains to be established. To investigate the micro-to-macro connection, we develop a mesoscale model, in which the NPbridging polymer chains are represented by a dynamic bonded interaction between NPs, and the bulk polymer matrix is implicitly modeled by overdamped Langevin dynamics. Extensive equilibrium simulations are performed to quantify the microscopic dynamics of model PNCs. Systematic analyses of modified Rouse dynamics, dynamic structure factor, and relaxation modulus uncover that the microscopic relaxation dynamics of PNCs are significantly decelerated across different length scales because of nonlocal effects of percolated particle networks a phenomenon that has not been adequately captured in prior simulation studies. We find that NPvolume- fraction and NP-bonding-energy barrier are the two critical variables that affect bulk viscoelasticity the most. The proposed mesoscale model is versatile and provides a powerful framework for studying structure−property relations of different PNCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Minimization of Cathode|Solid-Electrolyte Interfacial Delamination through the Application of Interphase Layers

Next-generation lithium-ion batteries are expected to use solid electrolytes (SEs) to enable higher energy density and extreme fast-charge capabilities. One major mode of degradation at the cathode|SE interface is delamination between the cathode active materials and SEs, which leads to performance decay. Experimental observations indicate that implementation of interphase layers can minimize the cathode|SE delamination induced capacity fade. A multiscale computational methodology is developed here to investigate the applicability of boron substituted lithium carbonate (Li 2+x B x C 1–x O 3 , x = 0.5, or LBCO) to minimize the delamination at the cathode|SE interface. Atomistic simulations indicate that the fracture energies at both the cathode|LBCO and LBCO|SE interfaces are higher than those at the cathode|SE interface, which reduces the extent of delamination. Mesoscale simulations indicate that, apart from increasing the fracture energy, decreasing the evolution of strain energy by lowering the elastic modulus of the interphase layer can also minimize the extent of delamination at the cathode|SE interface. However, the adoption of an interphase layer with high ionic conductivity is necessary to minimize the ohmic losses during operation at higher current densities. This study provides guidance on selecting interphase layers with specific properties and thicknesses to minimize both interfacial delamination and impedance growth.

LBCO↗