SEARCH · Search NASA
Results for “Morphology control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Controlling the Structure and Morphology of Organic Nanofilaments Using External Stimuli
Not Available
Tectonic controls on rift basin morphology: Evolution of the northern Malawi (Nyasa) rift
Radiometric (K-Ar and Ar-40/Ar-39) age determinations of volcanic and volcaniclastic rocks, combined with structural, gravity, and seismic reflection data, are used to constrain the age of sedimentary strata contained within the seismically and volcanically active northern Malawi (Nyasa) rift and to characterize changes in basin and flank morphologies with time. Faulting and volcanism within the Tukuyu-Karonga basin began at approximately 8.6 Ma, when sediments were deposited in abroad, initially asymmetric lake basin bounded on its northeastern side by a border fault system with minor topographic relief. Extensions, primarily by a slip along the border fault, and subsequent regional isostatic compensation led to the development of a 5-km-deep basin bounded by broad uplifted flanks. Along the low-relief basin margin opposite border fault, younger stratigraphic sequences commonly onlap older wedge-shaped sequences, although their internal geometry is often progradational. Intrabasinal faulting, flankuplift, and basaltic and felsic volcanism from centers at the northern end of the basin became more important at about 2.5 Ma when cross-rift transfer faults developed to link the Tukuyu-Karonga basin to the Rukwa basin. Local uplift and volcanic construction at the northern end of the basin led to a southeastward shift in the basin's depocenter. Sequence boundaries are commonly erosional along this low-relief (hanging wall) margin and conformable in the deep lake basin. The geometry of stratigraphic sequences and the distribution of the erosion indicate that horizontal and vertical crustal movements both across and along the length of the rift basin led to changes in levels of the lake, irrespective of paleoclimatic fluctuations.
Control of T lymphocyte morphology by the GTPase Rho
BACKGROUND: Rho family GTPase regulation of the actin cytoskeleton governs a variety of cell responses. In this report, we have analyzed the role of the GTPase Rho in maintenance of the T lymphocyte actin cytoskeleton. RESULTS: Inactivation of the GTPase Rho in the human T lymphocytic cell line HPB-ALL does not inhibit constitutively high adhesion to the integrin beta1 substrate fibronectin. It did however result in the aberrant extension of finger-like dendritic processes on the substrates VCAM-1, Fn, and mAb specific to beta1 integrins. Time-lapse video microscopy demonstrated that C3 induced extensions were primarily the result of an altered pseudopod elongation rather than retraction. Once the stellate pseudopodia extended, none retracted, and cells became completely immobile. Filipodial structures were absent and the dendritic-like processes in C3 treated cells were rich in filamentous actin. Immunolocalization of RhoA in untreated HPB-ALL cells spreading on fibronectin demonstrated a diffuse staining pattern within the pseudopodia. In C3 treated cells, clusters of RhoA were pronounced and localized within the altered extensions. CONCLUSIONS: GTPase Rho is actively involved in the regulation of T lymphocyte morphology and motility.
Microporous carbon nanofibers
A composition can include a carbon nanofiber, wherein a precursor for the carbon nanofiber includes an alcohol and an aldehyde crosslinked by a primary amine. In certain embodiments, the carbon nanofiber can be biotemplated. Biotemplating enables precise control of morphology at the nanometer scale, while molecular templating allows control of carbon nanotexture and structure at the sub-nanometer scale.
Engineering the Microstructure and Morphology of Explosive Films via Control of Interfacial Energy
Physical vapor deposition of organic explosives enables growth of polycrystalline films with a unique microstructure and morphology compared to the bulk material. This study demonstrates the ability to control crystal orientation and porosity in pentaerythritol tetranitrate films by varying the interfacial energy between the substrate and the vapor-deposited explosive. Additionally, variation in density, porosity, surface roughness, and optical properties is achieved in the explosive film, with significant implications for initiation sensitivity and detonation performance of the explosive material. Various surface science techniques, including angle-resolved X-ray photoelectron spectroscopy and multiliquid contact angle analysis, are utilized to characterize interfacial characteristics between the substrate and explosive film. Optical microscopy and scanning electron microscopy of pentaerythritol tetranitrate surfaces and fracture cross sections illustrate the difference in morphology evolution and the microstructure achieved through surface energy modification. X-ray diffraction studies with the Tilt-A-Whirl three-dimensional pole figure rendering and texture analysis software suite reveal that high surface energy substrates result in a preferred (110) out-of-plane orientation of pentaerythritol tetranitrate crystallites and denser films. Low surface energy substrates create more randomly textured pentaerythritol tetranitrate and lead to nanoscale porosity and lower density films. This work furthers the scientific basis for interfacial engineering of polycrystalline organic explosive films through control of surface energy, enabling future study of dynamic and reactive detonative phenomena at the microscale. Results of this study also have potential applications to active pharmaceutical ingredients, stimuli-responsive polymer films, organic thin film transistors, and other areas.
Teleoperated Modular Robots for Lunar Operations
Solar system exploration is currently carried out by special purpose robots exquisitely designed for the anticipated tasks. However, all contingencies for in situ resource utilization (ISRU), human habitat preparation, and exploration will be difficult to anticipate. Furthermore, developing the necessary special purpose mechanisms for deployment and other capabilities is difficult and error prone. For example, the Galileo high gain antenna never opened, severely restricting the quantity of data returned by the spacecraft. Also, deployment hardware is used only once. To address these problems, we are developing teleoperated modular robots for lunar missions, including operations in transit from Earth. Teleoperation of lunar systems from Earth involves a three second speed-of-light delay, but experiment suggests that interactive operations are feasible.' Modular robots typically consist of many identical modules that pass power and data between them and can be reconfigured for different tasks providing great flexibility, inherent redundancy and graceful degradation as modules fail. Our design features a number of different hub, link, and joint modules to simplify the individual modules, lower structure cost, and provide specialized capabilities. Modular robots are well suited for space applications because of their extreme flexibility, inherent redundancy, high-density packing, and opportunities for mass production. Simple structural modules can be manufactured from lunar regolith in situ using molds or directed solar sintering. Software to direct and control modular robots is difficult to develop. We have used genetic algorithms to evolve both the morphology and control system for walking modular robots3 We are currently using evolvable system technology to evolve controllers for modular robots in the ISS glove box. Development of lunar modular robots will require software and physical simulators, including regolith simulation, to enable design and test of robot software and hardware, particularly automation software. Ready access to these simulators could provide opportunities for contest-driven development ala RoboCup (http://www.robocup.org/). Licensing of module designs could provide opportunities in the toy market and for spin-off applications.
Text-mined dataset of gold nanoparticle synthesis procedures, morphologies, and size entities
Abstract Gold nanoparticles are highly desired for a range of technological applications due to their tunable properties, which are dictated by the size and shape of the constituent particles. Many heuristic methods for controlling the morphological characteristics of gold nanoparticles are well known. However, the underlying mechanisms controlling their size and shape remain poorly understood, partly due to the immense range of possible combinations of synthesis parameters. Data-driven methods can offer insight to help guide understanding of these underlying mechanisms, so long as sufficient synthesis data are available. To facilitate data mining in this direction, we have constructed and made publicly available a dataset of codified gold nanoparticle synthesis protocols and outcomes extracted directly from the nanoparticle materials science literature using natural language processing and text-mining techniques. This dataset contains 5,154 data records, each representing a single gold nanoparticle synthesis article, filtered from a database of 4,973,165 publications. Each record contains codified synthesis protocols and extracted morphological information from a total of 7,608 experimental and 12,519 characterization paragraphs.
Controlling the Crystal Packing and Morphology of Metal–Organic Macrocycles through Side-Chain Modification
Supramolecular nanotubes constructed from the self-assembly of conjugated metal–organic macrocycles provide a unique collection of materials properties, including solution processability, porosity, and electrical conductivity. Here we show how small modifications to the macrocycle periphery subtly alter the noncovalent interactions governing self-assembly, leading to large changes in crystal packing, crystal morphology, and materials properties. Specifically, we synthesized five distinct copper-based macrocycles that differ in either the steric bulk, polarity, or hydrogen-bonding ability of the peripheral side chains. We show that the electrical conductivity of these macrocycles is highly sensitive to steric bulk, decreasing by 3 orders of magnitude upon introduction of peripheral neopentyl substituents. Here, we further show that the introduction of hydrogen-bonding groups leads to more ordered packing and a dramatic increase in crystallite size. Together, these results establish side-chain engineering as a rich toolkit for controlling the packing structure, particle morphology, and bulk properties of conjugated metal–organic macrocycles.
The role of amorphous ZIF in ZIF-8 crystallization kinetics and morphology
Understanding the composition and structure of amorphous precursor phases is fundamental for elucidating two-step crystallization mechanisms and designing shape- and size-controlled nanomaterials. However, that understanding is largely lacking for metal–organic framework compounds despite their growing significance as functional materials. Here, in this study, we report the crystallization of zeolite imidazolate frameworks-8 (ZIF-8, Zn(C 4 H 5 N 2 ) 2 ) via an amorphous ZIF (am-ZIF) solid precursor phase with a rough stoichiometric composition of Zn(C 4 H 5 N 2 ) 1.78 (C 4 H 6 N 2 ) 0.17 (CH 3 COO) 0.22 . The formation of am-ZIF is attributed to the incomplete deprotonation of 2-Methylimidazole (HmIm) and the involvement of the hydrogen bond between CH 3 COO– and –HN, which can further transform into the dense Dia(Zn) structure with a diamondoid crystal topology in pure water. Taking am-ZIF as a precursor, the tunable dissolution and recrystallization kinetics of am-ZIF into ZIF-8, due to the addition of EtOH and CTAB, allows the selective fabrication of dodecahedral, cubic, and hollow ZIF-8. Overall, an in-depth understanding of the differences in composition and structure of am-ZIF from ZIF-8 and the resulting crystallization kinetics suggests a novel approach to designing metal–organic frameworks with controlled crystal morphology.
Colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 magnetic nanowires with non-van der Waals 1D structures
Design of one-dimensional (1D) nanomaterials based on non-van der Waals (non-vdW) 1D chain structures is emerging as a new materials frontier, owing to their strong intrinsic anisotropy and broad compositional diversity. However, achieving ultrathin 1D morphology in such systems remains a significant challenge. In this work, we report the colloidal synthesis of ultrathin KFeS 2 and RbFeS 2 nanowires—representing the first fabrication of ultrathin 1D nanomaterials driven by non-vdW 1D crystal structures. The nanowires exhibit diameters of ∼5 nm and lengths of microns, with anisotropic growth directed by covalent [FeS 2 ] − chains. Magnetic characterization reveals significantly reduced antiferromagnetic transition temperatures and suppressed interchain ferromagnetic interactions, demonstrating pronounced size and morphology effects. Control experiments on structurally related materials indicate that direct nucleation of the 1D phase is essential for achieving the nanowire morphology. These findings establish a new synthetic pathway to an understudied family of non-vdW 1D nanomaterials, enabling exploration of their emergent quantum and magnetic properties.
Hierarchical porous metals with deterministic 3D morphology and shape via de-alloying of 3D printed alloys
The present disclosure relates to a method for forming a three dimensional, hierarchical, porous metal structure with deterministically controlled 3D multiscale pore architectures. The method may involve providing a feedstock able to be applied in an additive manufacturing process, and using an additive manufacturing process to produce a three dimensional (3D) structure using the feedstock. The method may involve further processing the 3D structure through at least a de-alloying operation to form a metallic 3D structure having an engineered, digitally controlled macropore morphology with integrated nanoporosity.
Quantitative and experimental modelling of sapping networks
Development of drainage networks by erosion by emergent groundwater (sapping) is being modelled by a combination of laboratory experiments and theoretical modelling. Miniature drainage networks formed in fine-grained sediments share many morphologic characteristics of Martian and terrestrial networks suspected to be formed by sapping processes. A larger and better instrumented sapping box was constructed to further explore the processes of sapping and the morphology of resulting networks. The experiments to be conducted in the sapping box will investigate the roles of several factors in controlling network morphology. The mechanics of sapping of fine-grained sediments were investigated in experiments in a two-dimensional sapping chamber and through development of a theoretical model. Results of extensive tests on sapping erosion of fine-grained, cohesionless sediment were analyzed with a theoretical model of the mechanics of sapping erosion and transport.
Solidification and Morphological Evolution of Al-Si Eutectics in Convector-Diffusive Conditions
The Al-Si material system is an important and has been studied for over half century with a focus on industrial applications in high strength and high conductivity alloys. A great deal of researches have been focused on controlling the morphology and hence performance through the addition of small impurities and by processing conditions. Most of the structure-property correlations are based on the post solidified micromorphology and growth conditions. This material system is unique and has been explored for heat spreader, controlling coefficient of expansion by adjusting composition of silicon and in designing composites. The Al-Si system is very interesting system for understanding the dendritic (Al-rich side) eutectic transition. Recently this system has been of great interest because of its applications in designing heat spreader, low temperature flux to grow SiC large substrates and in controlling the coefficient of expansion of Al-based alloys. We have performed extensive experiments to understand eutectic transition and to understand the morphological evolution in presence of impurities. We will discuss the results of dendritic transition into faceted long grains in convector-diffusive conditions. In this presentation we will present morphological transition in presence of carbon impurity and development of novel morphology.
Control of Host-Matrix Morphology Enables Efficient Deep-Blue Organic Light-Emitting Devices
Mixing a sterically bulky, electron-transporting host material into a conventional single host–guest emissive layer is demonstrated to suppress phase separation of the host matrix while increasing the efficiency and operational lifetime of deep-blue phosphorescent organic light-emitting diodes (PHOLEDs) with chromaticity coordinates of (0.14, 0.15). Here, the bulky host enables homogenous mixing of the molecules comprising the emissive layer while suppressing single host aggregation; a significant loss channel of nonradiative recombination. By controlling the amorphous phase of the host-matrix morphology, the mixed-host device achieves a significant reduction in nonradiative exciton decay, resulting in 120 ± 6% increase in external quantum efficiency relative to an analogous, single-host device. In contrast to single host PHOLEDs where electrons are transported by the host and holes by the dopants, both charge carriers are conducted by the mixed host, reducing the probability of exciton annihilation, thereby doubling of the deep-blue PHOLED operational lifetime. These findings demonstrate that the host matrix morphology affects almost every aspect of PHOLED performance.
Alkali cation-induced cathodic corrosion in Cu electrocatalysts
The reconstruction of Cu catalysts during electrochemical reduction of CO 2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO 2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., –0.4 V RHE when using 0.1 M KHCO 3 ). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO 2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.
The role of solar local time in polar cap magnetic variations
The role of the earth's main field in controlling the morphology of magnetic disturbance is usually accounted for by use of invariant latitude and MLT (magnetic local time) as a coordinate system. Magnetic disturbance from ionospheric currents is also controlled by ionospheric conductivity. At high latitudes, where SLT (solar local time) can be very different from MLT, the use of only MLT can give misleading results. In particular, those diurnal magnetic variations in the polar cap that change characteristics between interplanetary magnetic sectors have a tendency to peak near noon SLT rather than noon MLT at Alert, where noon MLT and noon SLT differ by more than 10 hours. Because of the sparsity of magnetic observatories it is not possible to completely separate SLT and MLT effects.
The Local Cluster Survey II: disc-dominated cluster galaxies with suppressed star formation
We investigate the role of dense environments in suppressing star formation by studying $\rm \log _{10}(M_\star /M_\odot) \gt 9.7$ star-forming galaxies in nine clusters from the Local Cluster Survey (0.0137 < z < 0.0433) and a large comparison field sample drawn from the Sloan Digital Sky Survey. We compare the star formation rate (SFR) with stellar mass relation as a function of environment and morphology. After carefully controlling for mass, we find that in all environments, the degree of SFR suppression increases with increasing bulge-to-total (B/T) ratio. In addition, the SFRs of cluster and infall galaxies at a fixed mass are more suppressed than their field counterparts at all values of B/T. These results suggest a quenching mechanism that is linked to bulge growth that operates in all environments and an additional mechanism that further reduces the SFRs of galaxies in dense environments. We limit the sample to B/T ≤ 0.3 galaxies to control for the trends with morphology and find that the excess population of cluster galaxies with suppressed SFRs persists. Here, we model the time-scale associated with the decline of SFRs in dense environments and find that the observed SFRs of the cluster core galaxies are consistent with a range of models including a mechanism that acts slowly and continuously over a long (2–5 Gyr) time-scale, and a more rapid (<1 Gyr) quenching event that occurs after a delay period of 1–6 Gyr. Quenching may therefore start immediately after galaxies enter clusters.