Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mossbauer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

The rate of pyrite decomposition on the surface of Venus

We report the results of a detailed experiment study of the kinetics and mechanism of pyrite (FeS2) chemical weathering under Venus surface conditions. Pyrite is thermodynamically unstable on the surface of Venus and will spontaneously decompose to pyrrhotite (Fe7S8) because the observed S2 partial pressure in the lower atmosphere of Venus is lower than the S2 vapor pressure over coexisting pyrite and pyrrhotite. Pyrite decomposition kinetics were studied in pure CO2 and CO2 gas mixtures along five isotherms in the temperature range 390-531 C. In all gas mixtures studied, pyrite thermally decomposes to pyrrhotite (Fe7S8), which on continued heating loses sulfur to form more Fe-rich pyrrhotites. During this process the pyrrhotites are also being oxidized to form magnetite (Fe3O4), which converts to maghemite (gamma-Fe2O3), and then to hematite (alpha-Fe2O3). The reaction rates for pyrite thermal decomposition to pyrrhotite were determined by measuring the weight loss. The thickness of the unreacted pyrite in the samples provided a second independent reaction rate measurement. Finally, Mossbauer spectra done on 42 of the 115 experimental samples provided a third set of independent reaction rate data. Pyrite decomposition follows zero-order kinetics and is independent of the amount of pyrite present. The rate of pyrite decomposition is apparently independent of the gas compositions used and of the CO2 number density over a range of a factor of 40. The derived activation energy of approximately 150 kJ/mole is the same in pure CO2, two different CO-CO2 mixtures, and a ternary CO-SO2-CO2 mixture. Based on data for a CO-CO2-SO2 gas mixture with a CO number density approximately 10 times higher than at the surface of Venus and a SO2 number density approximately equal to that at the surface of Venus, the rate of pyrite destruction on the surface of Venus varies from about 1225 +/- 238 days/cm at the top of Maxwell Montes (approximately 660 K) to about 233 +/- 133 days/cm in the plains of Venus (approximately 740 K). These lifetimes are very short on a geological time scale and show that pyrite cannot exist on the surface of Venus for any appreciable length of time.

Fegley, B., Jr.↗
NASA NTRS1993

Assumptions About the Presence of Natural Glasses on Mars

Natural glasses occur not only on Earth but also in lunar rocks and in some meteorites. On geological grounds, natural glasses could be expected on the surface of Mars and their presence would have important implications for the weathering and alteration of the near-surface layer. Ultramafic and mafic magmatism rich in iron and some volatiles appears to have been important on Mars as has been impact cratering, volcanism, and possibly hydrothennal alteration. Available data indicate that we can presume the past or present existence of volcanic basaltic glasses, impact glasses formed by thermal fusion of meteorite-impact targets, and diaplectic (mainly maskelynite) glasses. Conditions appear unsuitable for the formation of tektites on the Martian surface, and the production of measurable amounts of fulgurite or combustion glass seems improbable. Prospects for the remote and in situ identification of Martian glasses and their subsequent weathering products are discussed and include orbital reflectance and thermal emission spectroscopic measurements and Mossbauer spectroscopy from a surface lander.

Bouska, Vladimir↗
NASA NTRS1993

Assumption About the Presence of Natural Glasses on Mars

Natural glasses occur not only on Earth but also in lunar rocks and in some meteorites. On geological grounds, natural glasses could be expected on the surface of Mars and their presence would have important implications for the weathering and alteraton of the near-surface layer. Ultramafic and mafic magmatism rich in iron and some volatiles appears to have been important on Mars as has been impact cratering, volcanism, and possibly hydrothertnal alteration, Available data indicate that we can presume the past or present existence of volcanic basaltic glasses, impact glasses formed by thermal fusion of meteorite-impact targets, and diaplectic (mainly maskelynite) glasses. Conditions appear unsuitable for the formation of tektites on the Martian surface, and the production of measurable amounts of fulgurite or combustion glass seems improbable. Prospects for the remote and in situ identificaton of Martian glasses and their subsequent weathering products are discussed and include orbital reflectance and thermal emission spectroscopic measurements and Mossbauer spectroscopy from a surface lander.

Bouska, Vladimir↗
NASA NTRS1995

The Weathering of Antarctic Meteorites: Climatic Controls on Weathering Rates and Implications for Meteorite Accumulation

Weathering of meteorites includes a variety of chemical and mineralogical changes, including conversion of metal to iron oxides, or rust. Other changes include the devitrification of glass, especially in fusion crust. On a longer time scale, major minerals such as olivine, pyroxene, and feldspar are partially or wholly converted to various phyllosilicates. The degree of weathering of meteorite finds is often noted using a qualitative system based on visual inspection of hand specimens. Several quantitative weathering classification systems have been proposed or are currently under development. Wlotzka has proposed a classification system based on mineralogical changes observed in polished sections and Mossbauer properties of meteorite powders have also been used. In the current paper, we discuss induced thermoluminescence (TL) as an indicator of degree of weathering of individual meteorites. The quantitative measures of weathering, including induced TL, suffer from one major flaw, namely that their results only apply to small portions of the meteorite.

Benoit, P. H.↗
NASA NTRS1995

Hematite, pyroxene, and phyllosilicates on Mars: Implications from oxidized impact melt rocks from Manicouagan Crater, Quebec, Canada

Visible and near-IR reflectivity, Mossbauer, and X ray diffraction data were obtained on powders of impact melt rock from the Manicouagan Impact Crater located in Quebec, Canada. The iron mineralogy is dominated by pyroxene for the least oxidized samples and by hematite for the most oxidized samples. Phyllosilicate (smectite) contents up to 15 wt % were found in some heavily oxidized samples. Nanophase hematite and/or paramagnetic ferric iron is observed in all samples. No hydrous ferric oxides (e.g., goethite, lepidocrocite, and ferrihydrite) were detected, which implies the alteration occurred above 250 C. Oxidative alteration is thought to have occurred predominantly during late-stage crystallization and subsolidus cooling of the impact melt by invasion of oxidizing vapors and/or solutions while the impact melt rocks were still hot. The near-IR band minimum correlated with the extent of aleration (Fe(3+)/Fe(sub tot)) and ranged from approx. 1000 nm (high-Ca pyroxene) to approx. 850 nm (bulk, well-crystalline hematite) for least and most oxidized samples, respectively. Intermediate band positions (900-920 nm) are attributed to low-Ca pyroxene and/or a composite band from hematite-pyroxene assemblages. Manicouagan data are consistent with previous assignments of hematite and pyroxene to the 850 and 1000 nm bands observed in Martian reflectivity spectra. Manicouagan data also show that possible assignments for intermediate band positions (900-920 nm) in Martian spectra are pyroxene and/or hematite-pyroxene assemblages. By analogy with impact melt sheets and in agreement with observables for Mars, oxidative alteration of Martian impact melt sheets above 250 C and subsequent erosion could produce rocks and soils with variable proportions of hematite (both bulk and nanophase), pyroxene, and phyllosilicates as iron-bearing mineralogies. If this process is dominant, these phases on Mars were formed rapidly at relatively high temperatures on a sporadic basis throughout the history of the planet. The Manicouagan samples also show that this mineralogical diversity can be accomplished at constant chemical composition, which is also indicated for Mars from analyses of soil at the two Viking landing sites.

Morris, Richard V.↗
NASA NTRS1999

Spectroscopic Properties of Metamorphosed Mafic Rocks: Remote Sensing Applications on Mars

Reflectance spectroscopy in the visible and near-infrared wavelengths, between 420 mn to 2588 nm. was utilized on a suite of hydrothermally metamorphosed mafic rocks from the Smartville complex in the northern Sierra Nevada mountains in California. A detailed data base of 102 samples was compiled in order to distinguish differences in mineralogy, petrology, and degree of metamorphism for remote sensing applications. Study was limited to metaigneous and metasedimentary rocks in an attempt to spectrally characterize terrestrial rocks analogous to the possible surface of Mars, for a better understanding and possible detection of the geologic features on the remote surface. Diagnostic absorption bands of iron, water, and hydroxyl produced the majority of discernible features in this study. Mossbauer spectroscopy was performed in order to determine specific iron sites. The resulting spectral data base along with thin section mineral identification, metamorphic zone, rock type and location were recorded and available for future application and research. Continued exploration of Mars in the advancing years, will further advance our understanding of the geology of Mars. Spectroscopic techniques will undoubtedly be integral parts of these future missions. Work on terrestrial analogs to the Martian surface must continue, in order to produce extensive data bases and broaden our knowledge of spectral features.

Graff, Trevor G.↗
NASA NTRS1999

Measuring the Chemical Potential of the Martian Regolith to Generate and Sustain Life

A critical component for identifying chemical biosignatures is the ability to assess in-situ the potential of an aqueous geochemical environment to generate and sustain life. On Mars or other solar bodies, in-situ chemical characterization could provide evidence as to whether the chemical composition of the regolith or evaporites in suspected ancient water bodies have been biologically influenced or possess the chemical parameters within which life may have existed, or may still exist. A variety of analytical techniques have been proposed for use in detecting and identify signatures of past or present life. These techniques fall into two groups; visual observation with instruments such as cameras or optical/atomic-force microscopes; or elemental chemical analysis with such instruments as X-ray fluorescence (XRF) and diffraction (XRD), a-proton backscatter (APX), y-ray, Mossbauer, Raman, IR, UV/VIS spectroscopies, gas chromatography (GC), or mass spectrometry (MS). Direct observation of an identifiable lifeform by the first set of instruments in a single sample is highly unlikely, especially for extinct organisms or on the surface. The later instruments can provide vital data as to the elemental mineralogy and geological history of the planet, but are highly inadequate for understanding the chemistry of the planet in terms of indigenous life or interactions with human explorers. Techniques such as XRD, XRF, and APX, provide elemental composition at high limits of detection. Some of this data can be extrapolated or interpolated to provide chemical parameters such as oxidation state or composition. Gas chromatography (GC) without standards and non-specific detectors, has little chance of identifying a mixture of unknown components. Combined with GC or by itself, mass spectrometry (MS) can provide identification of compounds, but in both cases the sample must be appropriately prepared for accurate and reliable analysis. Life as we know it, and probably identify it as such, requires an aqueous environment. Deciphering die chemical speciation of this aqueous environment is the key to recognizing therein the biosignatures of any extinct or present life forms. Identifying the soluble (ionic and nonionic) components by reacting a currently dormant environment can provide a "picture" of the thermodynamics and chemical components of a possibly bioactive environment. The only devices which can provide such information are electrochemical sensors based on the potentiometric ion selective electrodes (ISEs) and on dynamic techniques such as cyclic voltammetry (CV) and stripping voltammetry (SV). Such an array of devices can provide not only the chemical composition of a water-soluble Martian soil sample, but also several other vital chemical parameters such as pH, conductivity, redox potential, and dissolved gases. To address these issues we have been investigating the possible use of an electrochemically-based ion sensor array as a new integrated approach to quantitative analytical and chemometric electrochemical measurements. The sensor array will consist of specific and semispecific ion selective and amperometric transducers, which can simultaneously and continuously identify and semiquantitatively determine over 50 organic and inorganic analytes in water-based environments. Several individual sensors, based on the same principle, have been flight-tested and have been installed as part of the MECA instrumentation on the Mars 2001 Lander for in-situ analyses. However, the microfabrication, integration and multiplexing of such a large number of these sensors on a single substrate have not been previously attempted.

Kounaves, S. P.↗
NASA NTRS1999

The Mars 2001 Athena Precursor Experiment (APEX)

The Athena Precursor Experiment (APEX) is a suite of scientific instruments for the Mars Surveyor Program 2001 (MSP'01) lander. The major elements of the APEX pay load are: (1) Pancam/Mini-TES, a combined stereo color imager and mid-infrared point spectrometer. (2) An Alpha-Proton-X-Ray Spectrometer (APXS) for in-situ elemental analysis. (3) A Mossbauer Spectrometer for in-situ determination of the mineralogy of Fe-bearing rocks and soils. (4) A Magnet Array that can separate magnetic soil particles from non-magnetic ones.

Squyres, S. W.↗
NASA NTRS1999

Mars 2001 Lander Mission: Measurement Synergy Through Coordinated Operations Planning And Implementation

The 2001 Mars Surveyor Program Mission includes an orbiter with a gamma ray spectrometer and a multispectral thermal imager, and a lander with an extensive set of instrumentation, a robotic arm, and the Marie Curie Rover. The Mars 2001 Science Operations Working Group (SOWG) is a subgroup of the Project Science Group that has been formed to provide coordinated planning and implementation of scientific observations, particularly for the landed portion of the mission. The SOWG will be responsible for delivery of a science plan and, during operations, generation and delivery of conflict-free sequences. This group will also develop an archive plan that is compliant with Planetary Data System (PDS) standards, and will oversee generation, validation, and delivery of integrated archives to the PDS. In this report we cover one element of the SOWG planning activities, the development of a plan that maximizes the scientific return from lander-based observations by treating the instrument packages as an integrated payload. Scientific objectives for the lander mission have been defined. They include observations focused on determining the bedrock geology of the site through analyses of rocks and also local materials found in the soils, and the surficial geology of the site, including windblown deposits and the nature and history of formation of indurated sediments such as duricrust. Of particular interest is the identification and quantification of processes related to early warm, wet conditions and the presence of hydrologic or hydrothermal cycles. Determining the nature and origin of duricrust and associated salts is -very important in this regard. Specifically, did these deposits form in the vadose zone as pore water evaporated from soils or did they form by other processes, such as deposition of volcanic aerosols? Basic information needed to address these questions includes the morphology, topography, and geologic context of landforms and materials exposed at the site, together with quantitative information on material mineralogy, chemistry, and physical properties (rock textures; soil grain size and shape distributions; degree and nature of soil induration; soil magnetic properties). The calibration targets provide radiometric and mineralogical control surfaces. The magnets allow observations of magnetic phases. Patch plates are imaged to determine adhesive and abrasive properties of soils. Coordinated mission planning is crucial for optimizing the measurement synergy among the packages included on the lander. This planning has already begun through generation of multi-sol detailed operations activities. One focus has been to develop a scenario to use the arm to dig a soil trench to a depth of tens of centimeters. The activity will be monitored through use of Pancam and RAC to ensure nominal operations and to acquire data to determine subsurface physical properties (e.g., angle of repose of trench walls). Pancam and Mini-TES observations would also provide constraints on mineralogy and texture for the walls and bottom of the trench during excavation. If desired, soils excavated at depth could be deposited on the surface and Mossbauer and APXS measurements could be acquired for these materials. Soil samples from various depths would be delivered to MECA for characterization of aqueous geochemistry and physical properties of soil grains, particularly size, shape, and hardness. These physical properties would be determined by optical and atomic force microscopy. When completed, detailed information of soil properties as a function of depth would be obtained. These various data sets would constrain our understanding of whether or not there are systematic variations in soil characteristics as a function of depth. These variations might be related, for example, to evaporative moisture losses and formation of salt deposits, thereby indicating water transport processes occurred fairly recently. Many other value-added measurement scenarios are being developed. For example, characterizing the nature and dynamics of dust deposition will be done using MIP/DART to provide deposition rates, Pancam and RAC imaging of lander and rover surfaces to extrapolate these measurements to other areas, and a variety of measurements to determine if the bulk loose soil has the same characteristics as dust that accumulates during the mission. Bedrock geology of the site is primarily an APEX-focus setting, mineralogy, and texture, and APXS data to be we interest will be to determine the extent to which rock hydrothermal processes, given that APEX is the precursor 4 and 2005 rover missions. Additional information is contained in the original.

Arvidson, R.↗
NASA NTRS1999

The Mars Surveyor '01 Rover and Robotic Arm

The Mars Surveyor 2001 Lander will carry with it both a Robotic Arm and Rover to support various science and technology experiments. The Marie Curie Rover, the twin sister to Sojourner Truth, is expected to explore the surface of Mars in early 2002. Scientific investigations to determine the elemental composition of surface rocks and soil using the Alpha Proton X-Ray Spectrometer (APXS) will be conducted along with several technology experiments including the Mars Experiment on Electrostatic Charging (MEEC) and the Wheel Abrasion Experiment (WAE). The Rover will follow uplinked operational sequences each day, but will be capable of autonomous reactions to the unpredictable features of the Martian environment. The Mars Surveyor 2001 Robotic Arm will perform rover deployment, and support various positioning, digging, and sample acquiring functions for MECA (Mars Environmental Compatibility Assessment) and Mossbauer Spectrometer experiments. The Robotic Arm will also collect its own sensor data for engineering data analysis. The Robotic Arm Camera (RAC) mounted on the forearm of the Robotic Arm will capture various images with a wide range of focal length adjustment during scientific experiments and rover deployment

Bonitz, Robert G.↗
NASA NTRS2000

Identification of Crystalline Minerals in Volcanic Alteration Products and Applications to the Surface of Mars

Visible, infrared and Mossbauer spectra have been measured for fine-grained alteration products of volcanic tephra and ash. Comparison of the spectral and chemical properties for different size separates and related samples provides information about the crystalline materials in these samples and how they may have formed. Hydrothermal processes can increase the alteration rates of the primary minerals and glass and provide S, Fe and/or water for formation of sulfates and hydrated minerals. Identification of crystalline alteration minerals on Mars may indicate hydrothermal alteration and sites of interesting geologic processes.

Bishop, J. L.↗
NASA NTRS2000

Mineralogical and Geochemical Analyses of Antarctic Lake Sediments: A Reflectance and Moessbauer Spectroscopy Study with Applications for Remote Sensing on Mars

Lakebottom sediments from the Dry Valleys region of Antarctica have been analyzed here in order to study the influence of water chemistry on the mineralogy and geochemistry of these sediments, as well as to evaluate techniques for remote spectral identification of potential biomarker minerals on Mars. Lakes from the Dry Valleys region of Antarctica have been investigated as possible analogs for extinct lake environments on early Mars. Sediment cores were collected in the present study from perennially ice-covered Lake Hoare in the Taylor Valley. These sediments were taken from a core in an oxic region of the lake and another core in an anoxic zone. Differences between the two cores were observed in the sediment color, Fe(II)/Fe(III) ratio, the presence of pyrite, the abundance of Fe, S and some trace elements, and the C, N and S isotope fractionation patterns. The results of visible-infrared reflectance spectroscopy (0.3-25 microns) Mossbauer spectroscopy (77 and 4 K) and X-ray diffraction are combined to determine the mineralogy and composition of these samples. The sediments are dominated by plagioclase, K-feldspar, quartz and pyroxene. Algal mats grow on the bottom of the lake and organic material has been found throughout the cores. Calcite is abundant in some layers of the aerobic core (shallow region) and pyrite is abundant in some layers of the anaerobic core (deep region). Analysis of the spectroscopic features due to organics and carbonates with respect to the abundance of organic C and carbonate contents was performed in order to select optimal spectral bands for remote identification of these components in planetary regoliths. Carbonate bands near 4 and 6.8 microns (approx.2500 and 1500/cm) were detected for carbonate abundances as low as 0.1 wt.% CO2. Organic features at 3.38, 3.42 and 3.51 microns (2960, 2925 and 2850/cm) were detected for organic C abundances as low as 0.06 wt.% C. The d13C trends show a more complex organic history for the anaerobic sediments than for the aerobic sediments. The biogenic pyrite found in the anaerobic core is associated with lighter d34S values and high organic C levels and could be used as a biomarker mineral for paleolakes on Mars.

Froeschl, Heinz↗
NASA NTRS2003

Investigating Surface Mineralogy, Alteration Processes, and Biomarkers on Mars Using Laser Raman Spectroscopy

Despite a wealth of information from past and ongoing missions to Mars, the capability to determine the mineralogy of surface materials and to connect mineralogy with lithologic characteristics that are diagnostic of the environment in which those materials formed remains inadequate. The 2003 Mars Exploration Rovers (MER) will carry a Mini-TES and a Mossbauer spectrometer, which will provide some detailed mineralogy information. For general characterization of minerals and/or biogenic phases (reduced carbon, PAHs, etc) on the surface of Mars, we have been developing a miniaturized laser Raman spectrometer for in situ analyses -- the Mars Microbeam Raman Spectrometer, MMRS. We are also developing strategies to use Raman spectroscopy as a stand-alone technique and to be used synergistically with other in situ analysis methods in future planetary missions. Through studies of Martian meteorites and terrestrial analogs, we are gaining experience of what compositional and structural information can be obtained on key mineral groups using in-situ Raman measurements. We are developing methods for determining mineral proportions in rocks or soils and identifying rock types from sets of closely spaced, rapidly acquired spectra. We are studying how weathering and alteration affect the Raman and luminescence features of minerals and rocks, and we are investigating the Raman characteristics of biogenic organisms and their remains. These studies form the scientific basis for in-situ planetary Raman spectroscopy, and they are being done in parallel with instrument development towards a flight version of the MMRS.

Alian Wang↗
NASA NTRS2003

Moessbauer Spectroscopy on the Martian Surface: Predictions

Moessbauer spectrometers will be used on the upcoming MER/Athena and Mars Express/ Beagle 2 landers to identify and quantify relative amounts of iron-bearing minerals and determine Fe3+/Fe2+ ratios, allowing more realistic modeling of Martian mineralogy and geochemistry. To properly interpret the spectra acquired by these instruments, we must understand the Mossbauer parameters of minerals that we might expect to find on Mars. We present here a summary of predicted Fe-bearing minerals that might be observed by the MER Moessbauer spectrometers, based upon previous and our own on-going work.

Schaefer, M. W.↗
NASA NTRS2003

Moessbauer Spectroscopy of Mineral Separates from SNC Meteorites

Numerous workers have recently focused attention on the issue of the oxygen fugacity (f(sub O2)) of martian samples. Estimates of fO2 based on Fe-Ti oxides and D(sub Eu)/D(sub Gd) and D(sub Eu)/D(sub Sm) ratios suggest a range of fO2 values for SNC meteorites from IW+2.5 - IW+3.5 for Shergotty to IW- 2.0 - IW+0.2 for QUE94201. Fe(3+)/Fe(2+) is also a function of f(sub O2), and synchrotron micro-XANES values for olivine, pyroxene, and feldspar Fe(3+) have been reported. However, the relationship between the reported Fe(3+) values and the other methods for estimating f(sub O2) is not clear, and further measurements of Fe(3+)/Fe(2+) by a more conventional technique have been needed. Accordingly, in this project, new Mossbauer spectroscopy data on mineral separates handpicked from 10 SNC meteorites are reported.

Dyar, M. D.↗
NASA NTRS2003

Characterization of the Effects of Precursor Mineralogy on Hematite Spectra: Application to Martian Hematite Mineralization

The Thermal Emission Spectrometer (TES) instrument aboard Mars Global Surveyor discovered several isolated deposits of gray, crystalline hematite in Sinus Meridiani, Aram Chaos, and Valles Marineris. A variety of formation mechanisms has been proposed for the martian hematite deposits, including aqueous and nonaqueous processes. Comparison of the average Sinus Meridiani hematite spectrum measured by TES to laboratory emissivity spectra for a variety of naturally occurring hematites shows small but potentially important differences. In particular, the emissivity minimum at 300 and 445/cm in the Sinus Meridiani (SM) spectrum is displaced 10-25/cm to lower frequencies compared to some natural hematite samples. In addition, these bands in the TES data are narrower than the broad bands seen in many natural hematite spectra. These differences may imply that the natural variability of hematite spectra has not been fully characterized, especially with respect to the reaction pathway (precursor mineralogy and temperature of hematite formation) and crystal morphology. Here, we describe the thermal infrared spectral characteristics of several series of synthetic hematite samples derived by direct precipitation, dehydroxylation of fine-grained goethite and the oxidation of magnetite. Several natural hematite sample spectra are also presented for comparison. Transmission electron microscopy (TEM) and Mossbauer spectral analyses of selected samples were performed in order to help determine the causes of the changes seen in the infrared spectra.

Glotch, Timothy D.↗
NASA NTRS2003

Hydrothermal Alteration on Basaltic Mauna Kea Volcano as a Template for Identification of Hydrothermal Alteration on Basaltic Mars

Certain samples of palagonitic tephra from Mauna Kea Volcano (Hawaii) are spectral analogues for bright martian surface materials at visible and near-IR wavelengths because both are characterized by a ferric absorption edge extending from about 400 to 750 nm and relatively constant reflectivity extending from about 750 nm to beyond 2000 nm. Palagonite is a yellow or orange isotropic mineraloid formed by hydration and devitrification of basaltic glass. For Mars-analogue palagonite, the pigment is nanometersized ferric oxide particles (np-Ox) dispersed throughout an allophane-like hydrated basaltic glass matrix. Crystalline phyllosilicates are not generally detected, and the hydration state of the is not known. The poorly crystalline nature of glass alteration products implies relatively low temperature formation pathways. We report here x-ray diffraction, major element, Mossbauer, and VNIR data for 9 basaltic tephras. Thermal emission spectra are reported in a separate abstract. Our multidisciplinary approach both tightly constrains mineralogical interpretations and maximizes overlap with datasets available for the martian surface available now and in the future.

Morris, R. V.↗
NASA NTRS2004

Evidence for a Wet, Reduced Martian Interior

Knowledge of the oxygen fugacity and hydrogen content of the source regions of martian meteorites is of paramount importance in constraining phase equilibria, crystallization sequences, and geodynamic processes of the martian interior, as well as models of the planet's evolution. To date, these interpretations have been hindered by the paucity in SNC meteorites of Fe-Ti oxides used in conventional oxybarometry, and by the presence of secondary alteration products that make it impossible to quantify primary hydrogen abundances in SNC minerals and melts based on whole rock samples. We present here the first transmission FTIR spectra of individual mineral grains from SNC meteorites, and interpret those results along with Mossbauer data on mineral separates from the same meteorites. Our goal is to quantify the amount of water and the oxygen fugacity present in the source regions for the rocks comprising the meteorites.

Dyar, M. D.↗