Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nanoparticle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stamping Nanoparticles onto the Electrode for Rapid Electrochemical Analysis in Microfluidics

Electrochemical analysis is an efficient way to study various materials. However, nanoparticles are challenging due to the difficulty in fabricating a uniform electrode containing nanoparticles. We developed novel approaches to incorporate nanoparticles as a working electrode (WE) in a three-electrode microfluidic electrochemical cell. Specifically, conductive epoxy was used as a medium for direct application of nanoparticles onto the electrode surface. Three approaches in this work were illustrated, including sequence stamping, mix stamping, and droplet stamping. Shadow masking was used to form the conductive structure in the WE surface on a thin silicon nitride (SiN) membrane. Two types of nanomaterials, namely cerium oxide (CeO2) and graphite, were chosen as representative nanoparticles. The as-fabricated electrodes with attached particles were characterized using atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Electrochemical analysis was performed to verify the feasibility of these nanoparticles as electrodes. Nanomaterials can be quickly assessed for their electrochemical properties using these new electrode fabrication methods in a microfluidic cell, offering a passport for rapid nanomaterial electrochemical analysis in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Synthesis of Platinum Nanoparticles Supported on Fused Nanosized Carbon Spheres Derived from Sustainable Source for Application in a Hydrogen Generation Reaction

The dwindling supply of fossil fuels has prompted the search for an alternative energy source that could effectively replace them. Potential renewable energy sources such as solar, wind, tidal, and geothermal are all promising but each has its own drawbacks. Hydrogen gas on the other hand can be combusted to produce energy with only water as a byproduct and can be steadily generated via the aqueous media hydrolysis reaction of Sodium Borohydride (NaBH 4 ). This study successfully synthesized fused carbon spheres derived from sugar and decorated them with platinum nanoparticles to form a novel composite material (PtFCS) for catalyzing this reaction. The platinum nanoparticles were produced by reducing chloroplatinic acid in a solution with sodium borohydride and using sodium citrate as a capping agent for the nanoparticles. Transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) were used to characterize and determine the size and shape of the Pt nanoparticles (PtNPs) and fused carbon spheres. TEM was able to determine the average size of the fused carbon spheres to be 200 nm and the average size for the PtNPs to be 2–3 nm. The PtFCS composite was tested for its ability to catalyze the hydrolysis of NaBH 4 under various reaction conditions including various solution pH, various temperatures, and various dosages of sodium borohydride. The catalyst was found to perform the best under acidic solution conditions (pH 6), producing hydrogen at a rate of 0.0438 mL/mg cat ·min. The catalyst was determined to have an activation energy of 53.0 kJ/mol and could be used multiple times in succession with no loss in the volume of hydrogen produced. This sugar-derived composite catalyst shows promise and could be implemented as a sustainable catalyst for the generation of hydrogen fuel.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterizing the Geometry and Quantifying the Impact of Nanoscopic Electrocatalyst/Semiconductor Interfaces under Solar Water Splitting Conditions

The materials that are receiving the most attention in photoelectrochemical water splitting are metallic nanoparticle electrocatalysts (np-EC) attached to the surface of a semiconductor (SC) light absorber. In these multicomponent systems, the interface between the semiconductor and electrocatalysts critically affects performance. However, the np-EC/SC interface remains poorly understood as it is complex on atomic scales, dynamic under reaction conditions, and inaccessible to direct experimental probes. This contribution sheds light on how the electrocatalyst/semiconductor interface evolves under reaction conditions by investigating the behavior of nickel electrocatalysts (as nanoparticles and films) deposited on silicon semiconductors. Rigorous electrochemical experiments, interfacial atomistic characterization, and computational modeling are combined to demonstrate critical links between the atomistic features of the interface and the overall performance. It is shown that electrolyte-induced atomistic changes to the interface lead to (1) modulation of the charge carrier fluxes and a dramatic decrease in the electron/hole recombination rates and (2) a change in the barrier height of the interface. Additionally, the critical roles of nonidealities and electrocatalyst coverage due to interfacial geometry are explored. Each of these factors must be considered to optimize the design of metal/semiconductor interfaces which are broadly applicable to photoelectrocatalysis and photovoltaic research.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Copper(I) photosensitizer-silica nanoparticle assembly towards enhanced aqueous photoluminescence

Harnessing the luminescence potential of Cu(I) complexes in aqueous media is typically hindered by their poor photostability and altered properties. Here, we report the synthesis, engineering and morphological characterization of a hydrophobic homoleptic copper(I) complex entrapped into silica nanoparticles, Cu-I@SiO 2 (where “Cu-I” designates [Cu(2,9-diiodo-1,10-phenanthroline) 2 ] + ), as a promising stabilisation strategy towards water-compatible, Cu(I) complex-based luminescence. The polyether chain-decorated nano-objects are spherical with an average diameter of ca. 10.8 ± 1.9 nm. Upon dispersion in water, clear solution-like suspensions were obtained. Significantly, the aqueous suspensions photo-luminesce (Φ em = 5×10 -4 ) upon excitation through the Metal-to-Ligand Charge-Transfer transition (MLCT) of the embedded copper(I) complexes. In contrast, the corresponding silica-free molecular complex dissolved in an aqueous environment revealed fully quenched emission. Finally, the use of Cu-I@SiO 2 suspensions as luminescent probes is reported, first by assessing their potential use as electrochemiluminescent probes, and second by monitoring the photoluminescence from Cu-I@SiO 2 in the presence of whole blood.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(β-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigmsviamonocyte programming.

Science & Technology - Other Topics↗
DOE OSTI2022

Classifying handedness in chiral nanomaterials using label error robust deep learning

Abstract High-throughput scanning electron microscopy (SEM) coupled with classification using neural networks is an ideal method to determine the morphological handedness of large populations of chiral nanoparticles. Automated labeling removes the time-consuming manual labeling of training data, but introduces label error, and subsequently classification error in the trained neural network. Here, we evaluate methods to minimize classification error when training from automated labels of SEM datasets of chiral Tellurium nanoparticles. Using the mirror relationship between images of opposite handed particles, we artificially create populations of varying label error. We analyze the impact of label error rate and training method on the classification error of neural networks on an ideal dataset and on a practical dataset. Of the three training methods considered, we find that a pretraining approach yields the most accurate results across label error rates on ideal datasets, where size and other morphological variables are held constant, but that a co-teaching approach performs the best in practical application.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Robust hierarchical three dimensional nickel cobalt tungstate-MXene nanocomposite for high performance symmetric coin cell supercapacitors

Design of rational electrode materials with hierarchically structured pseudocapacitive materials has been identified as a successful strategy for revamping the electrochemical characteristics of supercapacitors. However, the simultaneous assurance of strong electrical conductivity and higher specific capacitance via a simple and cost-effective synthesis protocol is of concern today. In this work, Ni-CoWO 4 incorporated MXene nanocomposite has been successfully prepared by a facile hydrothermal process. The structure, morphology, stoichiometry, and chemical characterization of the prepared Ni-CoWO 4 , Ti 3 C 2 T x , and Ni-CoWO4@MXene nanocomposite were explored extensively. MXene demonstrated a layered 2D nanoscale structure whereas pure Ni-CoWO 4 was composed of spherical nanoparticles. The composite Ni-CoWO 4 @MXene revealed the morphology of spherical Ni-CoWO 4 nanoparticles decorated on MXene sheets. Furthermore, a series of electrochemical characterizations illustrated the contribution of the delightful morphology of Ni-CoWO 4 @MXene composite to excellent electrochemistry. The resultant Ni-CoWO 4 @MXene electrode exhibited high specific capacitance of 582 Fg -1 at 1 A g -1 and 93.5 % capacitance retention over the 10,000 cycles., which is higher than that of the individual counterparts Ni-CoWO 4 and MXene. The excellent electrochemical performance of Ni-CoWO 4 @MXene is attributed to the synergistic interaction between Ni-CoWO4 nanoparticles and nanolayered MXene that may create new active sites that enhanced the charge transfer, charge/discharge kinetics and the electrical conductivity. Significantly, the unique Ni-CoWO 4 @MXene supercapacitor prototype delivered a higher energy density of 85.7 Wh kg -1 and power density of 0.85 kW kg -1 establishing its superiority over other Cosingle bondW based supercapacitors. A theoretical study was also performed to correlate the improved charge storage capacity of the prepared Ni-CoWO 4 @MXene composite.

25 ENERGY STORAGE↗
DOE OSTI2025

Photothermal Properties of Nanostructured Black Titanium Dioxide for Targeted Cellular and Microbial Elimination

Heterophase black titanium dioxide (hB-TiO 2 ), characterized by broadened near-infrared (NIR) absorption, has emerged as a promising photothermally active nanomaterial. This study focused on the synthesis of nanoscale hB-TiO 2 and its evaluation as a multifunctional agent for photothermal therapy (PTT). The purity and composition of the mixed-phase nanoscale hB-TiO 2 were demonstrated by X-ray diffraction, and the morphology of nanoparticles was imaged by transmission electron microscopy. Extensive additional characterization was conducted to validate the optoelectronic properties. The material was further evaluated in biological systems using NIH 3T3-GFP fibroblasts and the fungus Candida albicans. Nanoscale hB-TiO 2 exhibited good biocompatibility in the absence of laser irradiation and effectively ablated both NIH 3T3-GFP cells and C. albicans following 20 min of laser exposure. This noninvasive treatment strategy leverages NIR-responsive materials to induce localized hyperthermia. The findings provide grounds for the use of selectively induced hyperthermia, which could be employed for the targeted destruction of cells or fungi with minimal impact on surrounding tissue if the material is functionalized with specific targeting groups and delivered to cells or fungal infections.

Irradiation↗
DOE OSTI2022

Mapping the effects of physical and chemical reduction parameters on local atomic distributions within bimetallic nanoparticles

Bimetallic nanoparticles prove advantageous over their monometallic counterparts due to the tunable, hybrid properties that result from combining different atomic species in a controlled way. The favorable optical and catalytic properties resulting from AgAu nanoparticle formation have been widely attributed to the existence of Ag–Au bonds, the maximization of which assumes the formation of a homogeneous alloy. Despite the importance of atomic scale structure in these systems, synthetic studies are typically not paired with structural characterization at the atomic scale. Herein, a comprehensive synthetic exploration of physical and chemical reduction parameters of resulting nanoparticle products is complemented with thorough X-ray characterization to probe how these parameters affect atomic scale alloy distributions within AgAu nanoparticles. Presented evidence shows Ag is substantially underincorporated into nanoparticle constructs compared with solution Ag : Au ratios regardless of precursor :reductant ratio or volume of reductant added. Both Ag and Au exhibit significant local clustering, with Ag distributed preferentially towards the nanoparticle surface. Most significantly, the results of this investigation suggest that reduction parameters alone can affect the local alloy distributions and homogeneity within bimetallic nanoparticles, even when the ratio of metallic precursors remains constant. Overall, this investigation presents the ability to control alloy distributions using kinetics and provides new considerations for optimizing synthetic methods to produce functional bimetallic nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Atomistic insights into the nucleation and growth of platinum on palladium nanocrystals

Abstract Despite the large number of reports on colloidal nanocrystals, very little is known about the mechanistic details in terms of nucleation and growth at the atomistic level. Taking bimetallic core-shell nanocrystals as an example, here we integrate in situ liquid-cell transmission electron microscopy with first-principles calculations to shed light on the atomistic details involved in the nucleation and growth of Pt on Pd cubic seeds. We elucidate the roles played by key synthesis parameters, including capping agent and precursor concentration, in controlling the nucleation site, diffusion path, and growth pattern of the Pt atoms. When the faces of a cubic seed are capped by Br − , Pt atoms preferentially nucleate from corners and then diffuse to edges and faces for the creation of a uniform shell. The diffusion does not occur until the Pt deposited at the corner has reached a threshold thickness. At a high concentration of the precursor, self-nucleation takes place and the Pt clusters then randomly attach to the surface of a seed for the formation of a non-uniform shell. These atomistic insights offer a general guideline for the rational synthesis of nanocrystals with diverse compositions, structures, shapes, and related properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Infrared Photon Pair-Production in Ligand-Sensitized Lanthanide Nanocrystals

This report details spectroscopic characterizations of rare-earth, core-shell nanoparticles decorated with the f -element chelator 3,4,3-LI(1,2-HOPO). Evidence of photon downconversion is corroborated through detailed power dependence measurements, which suggest two-photon decay paths are active in these materials, albeit only representing a minority contribution of the sum luminescence, with emission being dominated by normal, Stokes' shifted fluorescence. Specifically, ultraviolet ligand photosensitization of Nd 3+ ions in a NaGdF 4 host shell results in energy transfer to a Nd 3+ /Yb 3+ -doped NaGdF 4 nanoparticle core. The population and subsequent decay of core, Yb 3+ 2 F 5/2 states result in a spectral shift of 620 nm, manifested in a NIR emission displaying luminescence profiles diagnostic of Yb 3+ and Nd 3+ excited state decays. Emphasis is placed on the generality of this material architecture for realizing ligand-pumped, multi-photon downconversion, with the Nd 3+ /Yb 3+ system presented here functioning as a working prototype for a design principle that may be readily extended to other lanthanide pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2017

A Novel Solid State Ultracapacitor

Novel dielectric materials were researched to develop an internal barrier layer capacitor that is fully solid state. These materials included reduced nanoparticles of barium titanate that were coated with various atomic layer deposited oxides. The nanoparticle powders were then densified into pellets and characterized using a dielectric test fixture over a frequency range of 20 Hz to 2 MHz. Densification and sintering were evaluated using scanning electron microscopic techniques. Ultimately, the samples showing the most promising electrical characteristics of permittivity, dissipation factor and equivalent series resistance were chosen to manufacture devices for subsequent testing.

Cortes-Pena, A. Y.↗
DOE OSTI2022

In-Situ Liquid Cell Transmission Electron Microscopy of Nanoparticles from Spent Nuclear Fuel

Noble Metal Particles (NMP) that are present in SNF play an important role in the Fuel Matrix Degradation (FMD) Model that is being considered for predicting the release rate of radionuclides from a waste package. Previous characterization of chemically separated NMP from SNF showed that these were well-crystallized nanoparticles containing Mo, Tc, Ru, Rh, and Pd with some evidence of actinides. These same chemically separated particles were re-characterized following 10 years of storage as the separated material in water. Scanning Transmission Electron Microscopy (STEM) analysis revealed that significant alteration had occurred in this material during storage, resulting in the almost complete degradation of the NMP. We hypothesized that radiolytic damaged had occurred in the material. To support these concepts, we synthesized a mixed Ru-Pd nanoparticle and subjected it to irradiation in the electron microscope in an in-situ liquid cell. We demonstrated that intense radiation can lead to the decomposition of these metallic particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2005

Fabrication and Characterization of High Temperature Resin/Carbon Nanofiber Composites

Multifunctional composites present a route to structural weight reduction. Nanoparticles such as carbon nanofibers (CNF) provide a compromise as a lower cost nanosize reinforcement that yields a desirable combination of properties. Blends of PETI-330 and CNFs were prepared and characterized to investigate the potential of CNF composites as a high performance structural medium. Dry mixing techniques were employed and the effect of CNF loading level on melt viscosity was determined. The resulting powders were characterized for degree of mixing, thermal and rheological properties. Based on the characterization results, samples containing 30 and 40 wt% CNF were scaled up to approx.300 g and used to fabricate moldings 10.2 cm x 15.2 cm x 0.32 cm thick. The moldings were fabricated by injecting the mixtures at 260-280 C into a stainless steel tool followed by curing for 1 h at 371 C. The tool was designed to impart high shear during the process in an attempt to achieve some alignment of CNFs in the flow direction. Moldings were obtained that were subsequently characterized for thermal, mechanical and electrical properties. The degree of dispersion and alignment of CNFs were investigated using high-resolution scanning electron microscopy. The preparation and preliminary characterization of PETI-330/CNF composites are discussed. Keywords: resins, carbon nanofibers, scanning electron microscopy, electrical properties, thermal conductivity,injection

Ghose, Sayata↗
DOE OSTI2025

Promoting the oxidative coupling of methanol and dimethylamine using group 1 alkali metals on palladium-gold nanoparticles

PdAu/SiO 2 catalysts were synthesized by strong electrostatic adsorption (SEA) and characterized by TEM, DRIFTS, XRD, XAS, and O 2 -TPD. The use of group 1 alkali salt solutions to control pH during SEA syntheses led to uptake of alkali metals observed reductions in the densities of terminal silanol groups of the SiO 2 support. In the absence of alkali metals, PdAu/SiO 2 catalyzes oxidative C-N bond formation between methanol and dimethylamine (DMA), yielding dimethylformamide (DMF) with ∼95 % carbon selectivity (CO 2 ∼5 %) at temperatures below 413 K. When Na, K, and Cs were present on the catalyst, methyl formate (MF) and tetramethylurea (TMU) were observed as additional products (combined ∼30 % carbon selectivity) while only TMU was detected for the Li-promoted catalyst. Total coupling product rate increased for promoted samples in the order Li < Na < Cs < K, and the apparent kinetics over the Cs-promoted catalyst were distinct from those over the alkali-free catalyst as the apparent reaction order with respect to DMA decreased and the apparent activation energy increased. Finally, this work demonstrates the sensitivity of oxidative coupling reactions to alkali metal promoters and the opportunity to achieve alkali promotion of metal catalysts during SEA synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Excess free volume and structural properties of inert gas condensation synthesized nanoparticles based CuZr nanoglasses

Abstract Nanoglass (NG) as a new structure-tunable material has been investigated using both experiments and computational modeling. Experimentally, inert gas condensation (IGC) is commonly employed to prepare metallic glass (MG) nanoparticles that are consolidated using cold compression to generate an NG. In computational modeling, various methods have been used to generate NGs. However, due to the high computational cost involved, heretofore modeling investigations have not followed the experimental synthesis route. In this work, we use molecular dynamics simulations to generate an NG model by consolidating IGC-prepared Cu 64 Zr 36 nanoparticles following a workflow similar to that of experiments. The resulting structure is compared with those of NGs produced following two alternative procedures previously used: direct generation employing Voronoi tessellation and consolidation of spherical nanoparticles carved from an MG sample. We focus on the characterization of the excess free volume and the Voronoi polyhedral statistics in order to identify and quantify contrasting features of the glass-glass interfaces in the three NG samples prepared using distinct methods. Results indicate that glass-glass interfaces in IGC-based NGs are thicker and display higher structural contrast with their parent MG structure. Nanoparticle-based methods display excess free volume exceeding 4%, in agreement with experiments. IGC-prepared nanoparticles, which display Cu segregation to their surfaces, generate the highest glass-glass interface excess free volume levels and the largest relative interface volume with excess free volume higher than 3%. Voronoi polyhedral analysis indicates a sharp drop in the full icosahedral motif fraction in the glass-glass interfaces in nanoparticle-based NG as compared to their parent MG.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chapter 4.2 - Preparation of nanoparticles for surface analysis

A variety of methods used to prepare nano-objects for surface analysis are described along with information about when they might be best applied. Intrinsic properties of NPs that complicate their characterization and need to be considered when planning for surface or other analyses of NPs are identified, including challenges associated with reproducible synthesis and functionalization of the particles as well as their dynamic nature. Information about the sample preparation processes, along with analysis data, that need to be added to the collection of material provenance information is identified and examples of protocols that have been successfully used for preparation of nano-objects for surface analysis are included in an annex.

characterization challenges↗