SEARCH · Search NASA

Results for “Navier-Stokes solver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1989

A multigrid and upwind viscous flow solver on 3-D embedded and overlapped grids

A numerically efficient method is presented for solving the three-dimensional governing equations of the viscous compressible flow about complex configurations with topologically different components. The physical domain is decomposed into regions for which the grid generation is relatively simple and virtually with no significant restrictions. The Navier-Stokes equations are solved by an implicit, approximately factored, upwind, finite-volume scheme. The block inversions and the diagonalized scalar inversions of the coefficient matrices are modified to allow the holes created in the computational domain by the embedded and overlapped grids. The convergence is accelerated by a multigrid algorithm despite the existence of such holes. The solution for s supersonic flow past a blunt-nose-cylinder at high angle-of-attack is obtained using a C-O grid embedded in a global Cartesian grid.

Baysal, Oktay↗

NASA NTRS1988

Flow Analysis of Space Shuttle Feed Line 17-inch Disconnect Valve

A steady incompressible three-dimensional viscous flow analysis has been conducted for the Space Shuttle External Tank/Orbiter propellant feed line disconnect flapper valves with upstream elbows. The full Navier-Stokes code, INS3D, is modified to handle interior obstacles. Grids are generated by SVTGD3D code. Two dimensional initial grids in the flow cross section with and without the flappers are improved by elliptic smoothing to provide better orthogonality, clustering and smoothness to the three dimensional grid. The flow solver is tested for stability and convergence in the presence of interior flappers. An under-relaxation scheme has been incorporated to improve the solution stability. Important flow characteristics such as secondary flows, recirculation, vortex and wake regions, and separated flows are observed. Computed values for forces, moments, and pressure drop are in satisfactory agreement with water flow test data covering a maximum tube Reynolds number of 3.5 x 10(exp 6). The results will serve as a guide to improved design and enhanced testing of the disconnect.

Kandula, Max↗

NASA NTRS1990

A finite element solver for 3-D compressible viscous flows

Computation of the flow field inside a space shuttle main engine (SSME) requires the application of state of the art computational fluid dynamic (CFD) technology. Several computer codes are under development to solve 3-D flow through the hot gas manifold. Some algorithms were designed to solve the unsteady compressible Navier-Stokes equations, either by implicit or explicit factorization methods, using several hundred or thousands of time steps to reach a steady state solution. A new iterative algorithm is being developed for the solution of the implicit finite element equations without assembling global matrices. It is an efficient iteration scheme based on a modified nonlinear Gauss-Seidel iteration with symmetric sweeps. The algorithm is analyzed for a model equation and is shown to be unconditionally stable. Results from a series of test problems are presented. The finite element code was tested for couette flow, which is flow under a pressure gradient between two parallel plates in relative motion. Another problem that was solved is viscous laminar flow over a flat plate. The general 3-D finite element code was used to compute the flow in an axisymmetric turnaround duct at low Mach numbers.

Reddy, K. C.↗

NASA NTRS1978

Semidirect calculation of steady two- and three-dimensional flows

This paper describes a semidirect method for rapidly solving steady-state viscous flows described by the complete Navier-Stokes equations. The current results are for two-dimensional incompressible flows in general channels at arbitrary Reynolds numbers, but work in progress on compressible and three-dimensional flows is also described. The basic concept of semidirect methods is to use the recently developed fast (direct, or noniterative) linear solvers to solve linearized equations, which are then iterated to solve the nonlinearity. The method used here is an extension of the Split NOS method (Roache, 1975)

Roache, P. J.↗

NASA NTRS1989

LU-SGS implicit algorithm for three-dimensional incompressible Navier-Stokes equations with source term

A numerical method is developed for solving the incompressible Navier-Stokes equations using the concept of pseudocompressibility. A lower-upper symmetric-Gauss-Seidel implicit scheme is developed for three-dimensional incompressible viscous flow computations. The present algorithm offers additional advantages when solving the flow equations with source terms. Complete vectorizability of the algorithm on oblique planes of sweep in three-dimensions is accomplished in a new flow solver, INS3D-LU code. Spatial differencing is a second-order accurate semi-discrete finite-volume method augmented by a third-order accurate numerical dissipation model which is based on spectral-radii. Comparison of numerical solutions for a curved duct with experimental data shows good agreement. The method is applied to calculate the inducer flow of the Space Shuttle Main Engine turbopump.

Yoon, Seokkwan↗

NASA NTRS1986

Viscous compressible flow direct and inverse computation and illustrations

An algorithm for laminar and turbulent viscous compressible two dimensional flows is presented. For the application of precise boundary conditions over an arbitrary body surface, a body-fitted coordinate system is used in the physical plane. A thin-layer approximation of tne Navier-Stokes equations is introduced to keep the viscous terms relatively simple. The flow field computation is performed in the transformed plane. A factorized, implicit scheme is used to facilitate the computation. Sample calculations, for Couette flow, developing pipe flow, an isolated airflow, two dimensional compressor cascade flow, and segmental compressor blade design are presented. To a certain extent, the effective use of the direct solver depends on the user's skill in setting up the gridwork, the time step size and the choice of the artificial viscosity. The design feature of the algorithm, an iterative scheme to correct geometry for a specified surface pressure distribution, works well for subsonic flows. A more elaborate correction scheme is required in treating transonic flows where local shock waves may be involved.

Yang, T. T.↗

NASA NTRS1988

A solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

A solution method based on a fractional step approach is developed for obtaining time-dependent solutions of the three-dimensional, incompressible Navier-Stokes equations in generalized coordinate systems. The governing equations are discretized conservatively by finite volumes using a staggered mesh system. The primitive variable formulation uses the volume fluxes across the faces of each computational cell as dependent variables. This procedure, combined with accurate and consistent approximations of geometric parameters, is done to satisfy the discretized mass conservation equation to machine accuracy as well as to gain favorable convergence properties of the Poisson solver. The discretized equations are second-order-accurate in time and space and no smoothing terms are added. An approximate-factorization scheme is implemented in solving the momentum equations. A novel ZEBRA scheme with four-color ordering is devised for the efficient solution of the Poisson equation. Several two and three-dimensional solutions are compared with other numerical and experimental results to validate the present method.

Rosenfeld, Moshe↗

NASA NTRS1976

Recent computation of viscous effects in transonic flow

The paper describes some improvements to a method of solving the time-dependent Reynolds-averaged Navier-Stokes equations for two-dimensional compressible flows for describing the coupling between viscous and inviscid regions in transonic flows. Mesh patching is implemented at the sublayer-boundary layer interfaces and the boundary layer-inviscid flow interface. Mesh stretching is geometric and is small in regions of large gradients and large in regions of small gradients, thus preserving second-order accuracy. Mesh lines are arranged so as to accommodate MacCormack's rapid solver for hyperbolic systems and a wider class of turbulent transport models. Results of computations of transonic flows over lifting airfoils are compared with experimental data and other solutions.

Deiwert, G. S.↗

NASA NTRS1989

Multitasking a three-dimensional Navier-Stokes algorithm on the Cray-2

A three-dimensional computational aerodynamics algorithm has been multitasked for efficient parallel execution on the Cray-2. It provides a means for examining the multitasking performance of a complete CFD application code. An embedded zonal multigrid scheme is used to solve the Reynolds-averaged Navier-Stokes equations for an internal flow model problem. The explicit nature of each component of the method allows a spatial partitioning of the computational domain to achieve a well-balanced task load for MIMD computers with vector-processing capability. Experiments have been conducted with both two- and three-dimensional multitasked cases. The best speedup attained by an individual task group was 3.54 on four processors of the Cray-2, while the entire solver yielded a speedup of 2.67 on four processors for the three-dimensional case. The multiprocessing efficiency of various types of computational tasks is examined, performance on two Cray-2s with different memory access speeds is compared, and extrapolation to larger problems is discussed.

Swisshelm, Julie M.↗

NASA NTRS1988

Three dimensional flow simulation with application to aeroelastic analysis

The three-dimensional flowfield about realistic launch vehicle configurations is simulated using the Reynolds-averaged Navier-Stokes equations. Turbulent mixing is accounted for by means of the two-layer Baldwin and Lomax (1978) algebraic eddy viscosity model. The Beam and Warming (1976) implicit approximate factorization algorithm is used for the solution of the finite difference equations. Applications include the study of the flowfield about a hemisphere-cylinder configuration both in the subsonic and supersonic flight regimes, and about two hammerhead payload configurations at transonic speeds. A method is also described which permits incorporating this flow solver into a complete algorithm to perform time-domain aeroelastic stability analyses. The vehicle is modeled as a free-free beam and modal superposition techniques are used for the structural-dynamic formulation. Aeroelastic analyses were performed for the hammerhead configurations.

Azevedo, Joao Luiz F.↗

DOE OSTI2025

A high-order computational framework for particle-resolved simulations of disperse multiphase flows

This work presents a high-order numerical approach for particle-resolved simulations of disperse multiphase flows, where the Navier-Stokes equations for fluid flow are solved using a high-order spectral element method in the Eulerian framework, and the particle phase is directly simulated with a discrete element method. The coupling between particles and fluids is explicitly handled using an adapted direct-forcing immersed boundary method. Unlike the conventional schemes, a high-order barycentric Lagrange interpolation method and a Gaussian projection kernel are used to ensure accurate momentum exchange between local boundary points and surrounding fluid nodes in the framework of high-order fluid solver. Benchmark tests of increasing complexity are conducted to demonstrate the accuracy and efficiency of our method. Here, it is found that our approach exhibits an excellent convergence performance, as the fluid element/grid is refined and the number of boundary points increases. Compared to conventional low-order methods, the proposed high-order framework enables the use of substantially larger fluid elements while maintaining high accuracy in modeling fluid-particle interactions, owing to the enhanced resolution of high-order basis functions. Moreover, since the primary unknowns are stored at element or grid nodes, the high-order approach offers improved efficiency in both CPU memory usage and total computational cost.

42 ENGINEERING↗

NASA NTRS1989

Numerical solution of unsteady incompressible viscous flows in generalized moving coordinate systems

A solution method of the time-accurate, incompressible Navier-Stokes equations in generalized curvilinear moving coordinate systems is presented in this paper. Accuracy is achieved by a conservative finite-volume discretization which satisfies the geometric conservation laws in generalized moving coordinate systems. The solution method is second-order accurate in space and first-order accurate in time. A fractional step solution method is used to efficiently solve the discrete equations. The unknowns, namely the pressure and the volume-fluxes, are chosen to facilitate the formulation of a consistent Poisson equation and to obtain a robust Poisson solver with favorable convergence properties. The method is validated by comparisons to other numerical and experimental solutions. The comparisons show good agreement.

Rosenfeld, Moshe↗

NASA NTRS1983

Shock-capturing parabolized Navier-Stokes model /SCIPVIS/ for the analysis of turbulent underexpanded jets

A new computational model, SCIPVIS, has been developed to predict the multiple-cell wave/shock structure in under or over-expanded turbulent jets. SCIPVIS solves the parabolized Navier-Stokes jet mixing equations utilizing a shock-capturing approach in supersonic regions of the jet and a pressure-split approach in subsonic regions. Turbulence processes are represented by the solution of compressibility corrected two-equation turbulence models. The formation of Mach discs in the jet and the interactive turbulent mixing process occurring behind the disc are handled in a detailed fashion. SCIPVIS presently analyzes jets exhausting into a quiescent or supersonic external stream for which a single-pass spatial marching solution can be obtained. The iterative coupling of SCIPVIS with a potential flow solver for the analysis of subsonic/transonic external streams is under development.

Dash, S. M.↗

NASA NTRS1986

Finite element solver for 3-D compressible viscous flows

The space shuttle main engine (SSME) has extremely complex internal flow structure. The geometry of the flow domain is three-dimensional with complicated topology. The flow is compressible, viscous, and turbulent with large gradients in flow quantities and regions of recirculations. The analysis of the flow field in SSME involves several tedious steps. One is the geometrical modeling of the particular zone of the SSME being studied. Accessing the geometry definition, digitalizing it, and developing surface interpolations suitable for an interior grid generator require considerable amount of manual labor. There are several types of grid generators available with some general-purpose finite element programs. An efficient and robust computational scheme for solving 3D Navier-Stokes equations has to be implemented. Post processing software has to be adapted to visualize and analyze the computed 3D flow field. The progress made in a project to develop software for the analysis of the flow is discussed. The technical approach to the development of the finite element scheme and the relaxation procedure are discussed. The three dimensional finite element code for the compressible Navier-Stokes equations is listed.

Reddy, K. C.↗

NASA NTRS1989

Numerical algorithms for steady and unsteady incompressible Navier-Stokes equations

The numerical analysis of the incompressible Navier-Stokes equations are becoming important tools in the understanding of some fluid flow problems which are encountered in research as well as in industry. With the advent of the supercomputers, more realistic problems can be studied with a wider choice of numerical algorithms. An alternative formulation is presented for viscous incompressible flows. The incompressible Navier-Stokes equations are cast in a velocity/vorticity formulation. This formulation consists of solving the Poisson equations for the velocity components and the vorticity transport equation. Two numerical algorithms for the steady two-dimensional laminar flows are presented. The first method is based on the actual partial differential equations. This uses a finite-difference approximation of the governing equations on a staggered grid. The second method uses a finite element discretization with the vorticity transport equation approximated using a Galerkin approximation and the Poisson equations are obtained using a least squares method. The equations are solved efficiently using Newton's method and a banded direct matrix solver (LINPACK). The method is extended to steady three-dimensional laminar flows and applied to a cubic driven cavity using finite difference schemes and a staggered grid arrangement on a Cartesian mesh. The equations are solved iteratively using a plane zebra relaxation scheme. Currently, a two-dimensional, unsteady algorithm is being developed using a generalized coordinate system. The equations are discretized using a finite-volume approach. This work will then be extended to three-dimensional flows.

Hafez, Mohammed↗

DOE OSTI2026

Development of MOSCATO: A CFD-Level Electrochemistry and Corrosion Simulator for Molten Salt Systems

For both coolant and fueled variants of molten salt reactors (MSRs), the corrosion of structural materials is a significant challenge. The corrosion stems from chemical and electrochemical reactions initiated by fissile material, fission products, and impurities in the salt. Lower-fidelity models rely on empirical correlations for mass transfer, simplified lumped temperature profiles, and similar assumptions. They do not capture detailed spatial variations in complex geometries, creating the need for high-fidelity modeling to bridge this gap.As we approach the demonstration and possible deployment of MSRs in this decade, the development of a high-fidelity, high-performance simulator becomes imperative. To simulate the complex electrochemical environment and corrosion within molten salt systems, we have developed the Molten Salt Chemistry And TranspOrt (MOSCATO) code. This endeavor is comprised of three essential components. First, mass transfer equations are coupled with the Navier-Stokes equations in order to account for the transport of species in the salt. Second, the diffusion of alloy constituents, such as Cr, Fe, Ni, etc. is simulated within the structural metals. Third, the alloy and salt domains are coupled to account for the heterogeneous chemical and electrochemical reactions that occur at the salt-alloy interface.MOSCATO manages all three components within the framework of the highly scalable, open-source spectral element method computational fluid dynamics code Nek5000/NekRS. This integration enables MOSCATO to harness the immense computational power of modern high-performance computing resources, ensuring both high fidelity and computational speed.In addition to code development, we have initiated a comprehensive verification and validation campaign, utilizing data from diverse sources. First, MOSCATO's electrochemical solver was verified with reference numerical data. Then validation occurred against experiments: one of a thermal galvanic cell and the other for corrosion in flowing molten salt of FLiNaK (LiF-NaF-KF). This campaign verified and validated MOSCATO as a reliable tool for simulating electrochemical environments and corrosion in molten salt systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1987

Wall jet analysis for circulation control aerodynamics. Part 1: Fundamental CFD and turbulence modeling concepts

An overview of parabolic and PNS (Parabolized Navier-Stokes) methodology developed to treat highly curved sub and supersonic wall jets is presented. The fundamental data base to which these models were applied is discussed in detail. The analysis of strong curvature effects was found to require a semi-elliptic extension of the parabolic modeling to account for turbulent contributions to the normal pressure variations, as well as an extension to the turbulence models utilized, to account for the highly enhanced mixing rates observed in situations with large convex curvature. A noniterative, pressure split procedure is shown to extend parabolic models to account for such normal pressure variations in an efficient manner, requiring minimal additional run time over a standard parabolic approach. A new PNS methodology is presented to solve this problem which extends parabolic methodology via the addition of a characteristic base wave solver. Applications of this approach to analyze the interaction of wave and turbulence processes in wall jets is presented.

Dash, S. M.↗

NASA NTRS1985

Development of a boundary-layer-type solver based on simultaneous iteration technique for axisymmetric separated flows

A boundary-layer-type solver is developed for the numerical solution of axisymmetric separated flows. A new fully implicit coupling scheme for the viscous and inviscid regions is demonstrated. This fully implicit coupling technique is similar to the work of Carter, Veldman, and an extension of an earlier work of Halim and Hafez. A comparison is made for the convergence rate using this new fully implicit coupling technique and the semiimplicit coupling of Halim and Hafez. Numerical results using the fully implicit coupling are obtained for laminar incompressible separated flows, including a boattail and a series of trough geometries. Also, the near-wake flow problem is considered using the present formulation. A clear conclusion of this investigation is that the present scheme using the fully implicit coupling method converges at a faster rate than the semiimplicit coupling and the partially parabolized Navier-Stokes (PPNS) procedures.

Halim, A. A. M.↗