SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Expedition 2 crewmembers Commander Yuriy Usachev and Flight Engineers James Voss and Susan Helms are introduced in this prelaunch press conference. They answer questions from the press about their expectations and activities for the upcoming mission on the International Space Station.
George Diller, NASA Public Affairs, introduces Jim Halsell, Director of Shuttle Launch Integration, and Mike Leinbach, Shuttle Launch Director, in this STS-104 post-launch press conference. The men give an overview of the successful launch of Atlantis and answer questions from the press.
The early work of Bob Tull who invented a photoelectric spectral scanner comprised a crucial phase in the development of astronomical instrumentation. The relationship between the academic astronomy/astrophysics community and journalists has been in flux since the early 1960s. Scientists should recognize that they rely on the press to disseminate scientific information. Public citizens and policy makers are interested in the pursuits of scientific research for which taxes and other public monies are used.
Ultraviolet (UV) radiation is of great concern because its biological effects are predominantly harmful. UV damage may be direct or indirect, the latter mediated through the photochemical production of reactive oxygen species such as hydrogen peroxide. We measured the effect of H2O2 on various microbes both in the lab and in nature. At our study site in Yellowstone National Park, there is a UV-induced diurnal fluctuation of H2O2 extending up to one micron. Levels of DNA synthesis resulting from exposure to H2O2 were measured in several algal mats. Within naturally-occurring concentrations of H2O2, DNA synthesis increased. Laboratory studies showed that similar concentrations of H2O2 induce mitosis. We hypothesize that the low levels of H2O2 encountered in nature are inducing mitotic division. At higher levels of H2O2 a second peak in DNA synthesis was found which we interpret to represent DNA damage repair. These experiments suggest that in nature, the low levels of H2O2 produced may have a mitogenic rather than damaging effect. Assuming early levels of UV radiation were substantially higher at the time protists evolved, differential mitogenic effects could have influenced protistan evolution. With H2O2 likely to be present on such bodies as Mars and Europa, the response of organisms will be concentration-dependent and not linear.
The X-ray properties of 15 nearby (v less than 3,000 km/s) galaxies that possess AGN (active galactic nuclei) and/or starbursts are discussed. Two-thirds have nuclear extended emission on scales from approx. 0.5 to approx. 1.5 kpc that is either clearly associated with a nuclear outflow or morphologically resembles an outflow. Galaxies that are AGN-dominated tend to have linear structures while starburst-dominated galaxies tend to have plume-like structures. Significant X-ray absorption is present in the starburst regions, indicating that a circumnuclear starburst is sufficient to block an AGN at optical wavelengths. Galaxies with starburst activity possess more X-ray point sources within their central kpc than non-starbursts. Many of these sources are more luminous than typical X-ray binaries. The Chandra results are discussed in terms of the starburst-AGN connection, a revised unified model for AGN, and possible evolutionary scenarios.
This article describes how ELMs (emulsion liquid membranes) can be used for extraction. The article addresses the disadvantages of ELM extraction in a stirred contactor, and the advantages of SELMs (supported emulsion liquid membranes). The introduction of the article provides background information on liquid-liquid solvent extraction and dispersion-free solvent extraction.
E-Gov is an idea that is very popular these days. Many government agencies are adopting electronic information technology to improve both their internal and external capabilities to communicate with stakeholders and customers. This is an area where the Internet offers huge improvements in responsiveness. Unfortunately, Internet outreach traditionally has not been a budget area that received strong support in most agencies. Today, almost every government agency has some Internet presence: some extensive; others minimal. However, if you really want to reach your stakeholders and customers, just putting information out is not enough to assure it is useful. The most effective outreach sites are those that have moved beyond first generation static designs and concepts to newer communications approaches that stress two-way communication and collection and analysis of customer-oriented performance metrics. This talk discusses a few basic concepts in customer/stakeholder interaction as practiced by the very successful NASA family of websites, Science@NASA. Started 7 years ago as a single website, focusing on the science output of the Space Science Lab at NASA's Marshall Space Flight Center, Science@NASA in 2002 consisted of 6 websites with 450,000 subscribers and garnered over 700 million hits (approx. 64 million visits) in 2002 plus 3 international awards in the past 3 years. Focused content, tying presentation techniques to advanced communications concepts, managing and soliciting subscribers lists, automatic collection of performance metrics, soliciting and responding to customer feedback, and subscriber surveys are among the topics to be discussed. The successful NASAKids Club and the interactivity offered to children will also be covered. The attempt to make the customer/stakeholder DO SOMETHING is critical to our success.
NASA s challenging missions provide unique opportunities for engaging and educating America s youth, the next generation of explorers. Led by Chief Education Officer Dr. Adena Williams Loston, the Agency coordinates education programs for students, faculty, and institutions in order to help inspire and motivate the scientists and engineers of the future.
The Microgravity Smoldering Combustion (MSC) experiment lifted off aboard the Space Shuttle Endeavour for its second flight in May 1996, as part of the STS-77 mission. This experiment is part of a series of studies focused on the smolder characteristics of porous combustible materials in a microgravity environment. Smoldering is a nonflaming form of combustion that takes place in the interior of combustible materials. Common examples of smoldering are nonflaming embers, charcoal briquettes, and cigarettes. The objective of this study is to provide a better understanding of the controlling mechanisms of smoldering in microgravity and normal Earth gravity (1g). As with other forms of combustion, gravity affects the availability of air and transport of heat, and therefore, the rate of combustion. The results of the microgravity experiments will be compared with identical ones carried out in 1g. In addition, they will be used to verify present theories of smolder combustion and will provide new insights into the process of smoldering combustion, enhancing our fundamental understanding of this frequently encountered combustion process and guiding improvements in fire safety practices. Two smoldering combustion tests with polyurethane foam were successfully accomplished during the STS-77 mission. The tests investigated smoldering combustion in a quiescent (no-flow) enriched oxygen environment, and in an air environment with a 2-mm/sec airflow through the fuel sample. The primary data from the tests are the ignition characteristics, spread rate, smolder reaction temperature, and products of combustion (solid and gas). On both the first mission on STS-69 and the second mission on STS-77, a smolder front propagated the length of the forced-flow samples, with the spread rate between the corresponding upward and downward 1g smolder rates. Neither of the quiescent cases propagated combustion (the first case was due in part to a problem with the experiment electronics). These results show a dramatic difference from the normal gravity results, where smolder propagation is very rapid and complete for both of these conditions. The experiment was conceived by Prof. A. Carlos Fernandez-Pello at the University of California-Berkeley. The MSC hardware was designed and built at the NASA Lewis Research Center by a team of civil servants and contractors from NYMA, Inc., and Aerospace Design & Fabrication, Inc. (ADF). The hardware consists of two sealed aluminum combustion chambers (each being a half a cylinder). The chambers hold the MSC test section, data acquisition electronics, power distribution electronics, and instrumentation. The hardware is fitted into a 5-ft(sup 3) Get-Away-Special (GAS) canister that is mounted in the shuttle cargo bay. The test section consists of a quartz cylinder that contains the polyurethane foam sample and an igniter. This igniter, which is an electrically heated wire sandwiched between two porous ceramic disks, is mounted in contact with the end of the foam sample. An array of 12 thermocouples placed axially and radially along the foam sample provide temperature histories, which are used to determine the rate of smolder propagation, and the characteristics of the reaction.
Jessica Rye from NASA Public Affairs introduces: Wayne Hale, Space Shuttle Deputy Program Manager; Mike Leinbach, NASA Launch Director; and Tim Wilson, from the NASA Engineering and Safety Center. Hale begins the discussion with a video showing the following processes: 1) Changing of gap fillers at Orbiter Processing Facility; 2) The Orbiter Boom Sensor System (OBSS) being loaded into Discovery payload bay; 3) Engine installation; 4) Spacecrew at Michoud Assembly observing the area where the PAL ramps were removed; 5) Test being performed to mitigate liquid air forming underneath foam; and 6) Roll out of ET119 from New Orleans. Hale also presents a slide of the ET debris Mitigation Activities and ET Ice/Frost Ramps. Mike Leinbach says that Kennedy Space Center is ready to receive the tank and that he is ready to get on with the mission. Tim Wilson heads the team to resolve foam loss issues which is his primary goal before this flight. A question and answer period follows.
Inside - New NASA Procedural Requirement and Technical Standard for Limiting Orbital Debris Generation - Another Collision Avoidance Maneuver Made by NASA Satellite - Two Minor Satellite Fragmentations Identified in the Third Quarter - ISS Zarya Control Module Impact Damage - Three New Satellite Impact Tests - A Preliminary Active Debris Removal Study - Abstracts from the NASA Orbital Debris Program Office - Space Missions and Orbital Box Score
Topics discussed include: new debris from a decommissioned satellite with a nuclear power source; debris from the destruction of the Fengyun-1C meteorological satellite; quantitative analysis of the European Space Agency's Automated Transfer Vehicle 'Jules Verne' reentry event; microsatellite impact tests; solar cycle 24 predictions and other long-term projections and geosynchronus (GEO) environment for the Orbital Debris Engineering Model (ORDEM2008). Abstracts from the NASA Orbital Debris Program Office, examining satellite reentry risk assessments and statistical issues for uncontrolled reentry hazards, are also included.
Topics include: debris clouds left by satellite collision; debris flyby near the International Space Station; and break-up of an ullage motor from a Russian Proton launch vehicle. Findings from the analysis of the STS-126 Shuttle Endeavour window impact damage are provided. Abstracts from the NASA Orbital Debris program office are presented and address a variety of topics including: Reflectance Spectra Comparison of Orbital Debris, Intact Spacecraft, and Intact Rocket Bodies in the GEO Regime; Shape Distribution of Fragments From Microsatellite Impact Tests; Micrometeoroid and Orbital Debris Threat Mitigation Techniques for the Space Shuttle Orbiter; Space Debris Environment Remediation Concepts; and, In Situ Measurement Activities at the NASA Orbital Debris Program Office. Additionally, a Meeting Report is provided for the 12 meeting of the NASA/DoD Orbital Debris Working Group.
Inside - Congressional Hearing Held on Orbital Debris and Space Traffic - United Nations' COPUOS Receives Update on Iridium-Cosmos Collision - MMOD Inspection of the HST WFPC2 Radiator - Reentry Survivability Analysis of GPM Spacecraft - Update on Recent Major Breakup Fragments - Upcoming Meetings - Space Missions and Orbital Box Score
Although NASA has conducted research on orbital debris since the 1960s, the NASA Orbital Debris Program Office is now considered to have been established in October 1979, following the recognition by senior NASA officials of orbital debris as a space environmental issue and the allocation by NASA Headquarters Advanced Programs Office to the Lyndon B. Johnson Space Center (JSC) of funds specifically dedicated for orbital debris investigations. In the 30 years since, the NASA Orbital Debris Program Office has pioneered the characterization of the orbital debris environment and its potential effects on current and future space systems, has developed comprehensive orbital debris mitigation measures, and has led efforts by the international aerospace community in addressing the challenges posed by orbital debris. In 1967 the Flight Analysis Branch at the Manned Spacecraft Center (renamed the Lyndon B. Johnson Space Center in 1973) evaluated the risks of collisions between an Apollo spacecraft and orbital debris. Three years later the same group calculated collision risks for the forthcoming Skylab space station, which was launched in 1973. By 1976, the nucleus of NASA s yet-to-be-formed orbital debris research efforts, including Andrew Potter, Burton Cour-Palais, and Donald Kessler, was found in JSC s Environmental Effects Office, examining the potential threat of orbital debris to large space platforms, in particular the proposed Solar Power Satellites (SPS).
This bulletin contains articles from the Orbital Debris Program office. This issue's articles are: "Orbital Debris Success Story --A Decade in the Making", "Old and New Satellite Breakups Identified," "Update on Three Major Debris Clouds," and "MMOD Inspection of the HST Bay 5 Multi-Layer Insulation Panel" about micrometeoroid and orbital debris (MMOD) inspection of the Hubble Space Telescope (HST) insulation panel. A project review is also included (i.e., "Small Debris Observations from the Iridium 33/Cosmos 2251 Collision.") There are also abstra cts of conference papers from the staff of the program office.
This issue contains articles about: (1) the Innovative Partnerships Program (IPP) and the manager of the program, Alexis Hongamen, (2) New Technology Report (NTR) on a Monte Carlo Simulation to Estimate the Likelihood of Direct Lightning Strikes, (3) Kennedy Space Center's Applied Physics Lab, (4) a virtual ruler that is used for many applications, (5) a portable device that finds low-level leaks, (6) a sun-shield, that supports in-space cryogenic propellant storage, (7) lunar dust modeling software, (8) space based monitoring of radiation damage to DNA, (9) the use of light-emitting diode (LED) arrays vegetable production system, (10) Dust Tolerant Intelligent Electrical Connection Systems, (11) Ice Detection Camera System Upgrade, (12) Repair Techniques for Composite Structures, (13) Cryogenic Orbital Testbed, and (14) copyright protection.
There is a strong focus on technology in our human exploration strategy and a focus on a wide range of technology readiness levels (TRLs) across all NASA missions - from low-TRL development of innovative technological concepts that help reposition NASA on the cutting edge, to infusion of technology to solve critical mission needs. Throughout the TRL spectrum, there is a major emphasis on partnerships with academia, industry, and other Government agencies and among NASA Centers. This edition features are: (1) Aluminum Foam Heat Exchanger for Cold Helium Production, (2) Launching a Small Business with NASA Shuttle Software, (4) Aviation Technologies and the Personal Cabin Pressurization Monitor, (5) Granular Mechanics and Regolith Laboratory, (6) The Leahy-Smith America Invents Act