Search NASA⌕ Search

SEARCH · Search NASA

Results for “NonDestructive Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

ULTRASONIC MEASUREMENT MODELS FOR SURFACE WAVE AND PLATE WAVE INSPECTIONS

A complete ultrasonic measurement model for surface and plate wave inspections is obtained, where all the electrical, electromechanical, and acoustic/elastic elements are explicitly described. Reciprocity principles are used to describe the acoustic/elastic elements specifically in terms of an integral of the incident and scattered wave fields over the surface of the flaw. As with the case of bulk waves, if one assumes the incident surface waves or plate waves are locally planar at the flaw surface, the overall measurement model reduces to a very modular form where the far-field scattering amplitude of the flaw appears explicitly.

36 MATERIALS SCIENCE↗

Determination of the Al Composition of Al{sub x}Ga{sub 1-x}N Thin Films By Means Of EDX and XRD Techniques

In this paper, the determinations of Al composition x of Al{sub x}Ga{sub 1-x}N(0{<=}x{<=}1) thin films by means of the energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analyses are reported. Through these non-destructive and contactless techniques, a large probed area of the Al{sub x}Ga{sub 1-x}N samples can be selected. Consequently, the uncertainty due to the inhomogeneity of the Al composition can be avoided. For EDX measurements, the Al composition is calculated based on the weight percent of the Al and Ga elements, while that in the XRD measurements is based on lattice constant c and Vegard's law. The results from these two independent techniques are in good agreement with each other.

36 MATERIALS SCIENCE↗

Reduced ablative Rayleigh-Taylor growth measurements in indirectly driven laminated foils

Indirectly driven, ablative Rayleigh-Taylor instability growth measurements in Ge-doped plastic foils were studied using face-on and side-on x-ray radiography. Laminated samples consisting of alternating layers of Ge-doped and undoped plastic and homogeneous Ge-doped foils were considered. We show for the first time that hydrodynamics do not depend upon structuration of the samples and that stabilization occurs in the case of laminated samples. All data were found to be in good agreement with bi-dimensional hydrosimulations based on theoretical and numerical predictions published earlier [L. Masse, Phys. Rev. Lett. 98, 245001 (2007)], encouraging new designs using laminated structures for ignition capsules.

36 MATERIALS SCIENCE↗

Structured scintillator for hard x-ray grating interferometry

Grating interferometry at conventional x-ray tubes improves the quality of radiographies and tomograms by providing phase and scattering contrast data. The main challenge encountered when applying this technique at high photon energies, as required by many applications to obtain sufficient penetration depth, is to maintain a high fringe visibility. In this letter, we report on a substantial improvement in fringe visibility and according improvements in image quality achieved by replacing the absorbing analyzer grating of the interferometer with a structured scintillator grating. This development represents a significant step toward the implementation of this technique in industrial testing and medical applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A model of ultrasonic testing for cracks near a non-planar surface

Based on the methodology of the 2D models presented at QNDE 2008 and QNDE 2009, this paper presents an extension to 3D of a model of ultrasonic testing for cracks near a non-planar back surface. The elastic wave scattering in a thick-walled component by an interior rectangular crack located near a back surface of arbitrary geometry is considered. The 3D wave scattering problem is solved using a hybrid boundary integral equation method (BIEM): a displacement boundary element method (BEM) for the back surface displacements is combined with an analytical technique for the hypersingular traction integral equation for the crack-opening displacements. The action of ultrasonic transducers in transmission and reception is taken into account in the model, and a few numerical examples illustrating the influence of the back surface geometry are given.

42 ENGINEERING↗

Characterization of waviness in wind turbine blades using air coupled ultrasonics

Waviness in glass fiber reinforced composite is of great interest in composite research, since it results in the loss of stiffness. Several NDE techniques have been used previously to detect waviness. This work is concerned with waves normal to the plies in a composite. Air-coupled ultrasonics was used to detect waviness in thick composites used in the manufacturing of wind turbine blades. Composite samples with different wave aspect ratios were studied. Different wavy samples were characterized, and a three step process was developed to make sure the technique is field implementable. This gives us a better understanding of the effect of waviness in thick composites, and how it affects the life and performance of the composite.

42 ENGINEERING↗

Miniaturized hand held microwave interference scanning system for NDE of dielectric armor and armor systems

Inspection of ceramic-based armor has advanced through development of a microwave-based, portable, non-contact NDE system. Recently, this system was miniaturized and made wireless for maximum utility in field applications. The electronic components and functionality of the laboratory system are retained, with alternative means of position input for creation of scan images. Validation of the detection capability was recently demonstrated using specially fabricated surrogates and ballistic impact-damaged specimens. The microwave data results have been compared to data from laboratory-based microwave interferometry systems and digital x-ray imaging. The microwave interference scanning has been shown to reliably detect cracks, laminar features and material property variations. The authors present details of the system operation, descriptions of the test samples used and recent results obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation supported POD: Methodology and HFET validation case

Structure reliability guaranty requires prior evaluation of non destructive testing methods. The concept of Probability of Detection (POD) is generally used to quantitatively assess performances and reliability of testing operations. Such probabilistic approaches take into account the uncertainties that appear during inspections and that are responsible for the output variability. POD curve determination is based on costly and time consuming experimental campaigns. Increasing demand of NDT configurations requiring POD evaluation makes cost reduction of POD campaigns a major issue. A new trend is to apply simulation in the context of probabilistic approaches in order to replace some of the experimental data required to determine the POD with simulation results. This paper presents results of simulation based POD curves of a high frequency eddy current inspection procedure obtained with the new POD module of CIVA. The methodology used for describing uncertainties on the input simulation parameters is described and comparisons with experimental results are presented and discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Neutron Induced Beta Radiography

In the present paper we give a new methodology named, 'neutron induced beta radiography-NIBR' which makes use of neutron activated Dy or In foils as source of (3-radiation. Radiographs are obtained with an aluminium cassette containing image plate, a sample under inspection and the activated Dy or In foil kept in tight contact. The sensitivity of the technique to thickness was evaluated for different materials in the form of step wedges. Some radiographs are presented to demonstrate potential of method to inspect thin samples.

07 ISOTOPE AND RADIATION SOURCES↗

Plasma Barodiffusion in Inertial-Confinement-Fusion Implosions: Application to Observed Yield Anomalies in Thermonuclear Fuel Mixtures

The observation of large, self-generated electric fields ({>=}10{sup 9} V/m) in imploding capsules using proton radiography has been reported [C. K. Li et al., Phys. Rev. Lett. 100, 225001 (2008)]. A model of pressure gradient-driven diffusion in a plasma with self-generated electric fields is developed and applied to reported neutron yield deficits for equimolar D{sup 3}He[J. R. Rygg et al., Phys. Plasmas 13, 052702 (2006)] and (DT){sup 3}He[H. W. Herrmann et al., Phys. Plasmas 16, 056312 (2009)] fuel mixtures and Ar-doped deuterium fuels [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)]. The observed anomalies are explained as a mild loss of deuterium nuclei near capsule center arising from shock-driven diffusion in the high-field limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

APPLICATION FO FLOW FORMING FOR USE IN RADIOACTIVE MATERIAL PACKAGING DESIGNS

This paper reports on the development and testing performed to demonstrate the use of flow forming as an alternate method of manufacturing containment vessels for use in radioactive material shipping packaging designs. Additionally, ASME Boiler and Pressure Vessel Code, Section III, Subsection NB compliance along with the benefits compared to typical welding of containment vessels will be discussed. SRNL has completed fabrication development and the testing on flow formed containment vessels to demonstrate the use of flow forming as an alternate method of manufacturing a welded 6-inch diameter containment vessel currently used in the 9975 and 9977 radioactive material shipping packaging. Material testing and nondestructive evaluation of the flow formed parts demonstrate compliance to the minimum material requirements specified in applicable parts of ASME Boiler and Pressure Vessel Code, Section II. Destructive burst testing shows comparable results to that of a welded design. The benefits of flow forming as compared to typical welding of containment vessels are significant: dimensional control is improved due to no weld distortion; less final machining; weld fit-up issues associated with pipes and pipe caps are eliminated; post-weld non-destructive testing (i.e., radiography and die penetrant tests) is not necessary; and less fabrication steps are required. Results presented in this paper indicate some of the benefits in adapting flow forming to design of future radioactive material shipping packages containment vessels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantitative multi-modal NDT data analysis

A single NDT technique is often not adequate to provide assessments about the integrity of test objects with the required coverage or accuracy. In such situations, it is often resorted to multi-modal testing, where complementary and overlapping information from different NDT techniques are combined for a more comprehensive evaluation. Multi-modal material and defect characterization is an interesting task which involves several diverse fields of research, including signal and image processing, statistics and data mining. The fusion of different modalities may improve quantitative nondestructive evaluation by effectively exploiting the augmented set of multi-sensor information about the material. It is the redundant information in particular, whose quantification is expected to lead to increased reliability and robustness of the inspection results. There are different systematic approaches to data fusion, each with its specific advantages and drawbacks. In our contribution, these will be discussed in the context of nondestructive materials testing. A practical study adopting a high-level scheme for the fusion of Eddy Current, GMR and Thermography measurements on a reference metallic specimen with built-in grooves will be presented. Results show that fusion is able to outperform the best single sensor regarding detection specificity, while retaining the same level of sensitivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optoacoustic method for determination of submicron metal coating properties: Theoretical consideration

The goal of this work is theoretical consideration of the optoacoustic (OA) conversion in the system consisting of a metal film deposited on a transparent dielectric substrate and covered by a transparent liquid. This consideration implies a method for nondestructive evaluation of submicron metal coatings. The main principle of the method is the following. Irradiation of the metal film by a nanosecond laser pulse leads to transient heating and expansion of the film that in turn results in the generation of an acoustic signal. The waveform of the signal results from two contributions: the 'primary' signal from the thermal expansion of the metal film, which repeats the temporal profile of the laser pulse envelope, and the 'secondary' signal, which originates from the thermal expansion of the adjacent liquid layer. Due to low thermal conductivity of liquid compared to metal, the liquid accumulates heat that is released in metal and produces that secondary contribution into the OA conversion. This contribution is very sensitive to the properties of the film. The influence of the film thickness and its thermophysical parameters on the frequency-dependent efficiency of OA conversion and on the temporal profile of excited OA signals is discussed in detail. Based on these results, the method for nondestructive evaluation of submicron metal coatings properties is proposed.

36 MATERIALS SCIENCE↗

State-of-the-art of non-destructive testing methods and technologies for application to nuclear power plant safety-related concrete structures

The inspection of nuclear power plant concrete structures presents challenges different from conventional civil engineering structures. Wall thicknesses can be in excess of one meter and the structures often have increased steel reinforcement density with more complex detailing. The accessibility for any testing method may be limited due to the presence of liners and other components and there can be a number of penetrations or cast-in-place items present. The objective of the report is to present the state-of-the art of non-destructive testing methods and technologies for the inspection of thick, heavily-reinforced nuclear power plant concrete cross-sections with particular respect to: •locating steel reinforcement and identification of its cover depth •locating tendon ducts and identification of the condition of the grout materials •detection of cracking, voids, delamination, and honeycombing in concrete structures •detection of inclusions of different materials or voids adjacent to the concrete side of the containment liner •methods capable of identification of corrosion occurrence on the concrete side of the containment liner.

42 ENGINEERING↗

THERMAL CONDUCTIVITY MEASUREMENT FOR THERMAL BARRIER COATINGS BASED ON ONE- AND TWO-SIDED THERMAL IMAGING METHODS

The thermal conductivity of thermal barrier coatings (TBCs) is normally measured using laser flash method, which is a two-sided thermal imaging method. Because laser flash cannot be used for TBCs applied on real components, one-sided thermal imaging method is being developed for potential nondestructive inspection and monitoring of TBC conditions during service. One such method is a multilayer thermal modeling method developed at Argonne National Laboratory. In this study, these methods are reviewed and their capability for conductivity measurement for two-layer TBC material is analyzed based on theoretical analyses. In particular, it is identified that only one TBC property, the conductivity, can be determined by two-sided methods, while two TBC properties, conductivity and heat capacity, can be determined by one-sided method.

36 MATERIALS SCIENCE↗

Materials Characterization and Interrogation using Terahertz Radiation

Terahertz (THz) radiation is a powerful tool for characterizing materials and interrogating complex systems. The low-energy, non-ionizing nature of THz photons make it ideal for use as a non-destructive, non-contacting probe. Identification of materials by their unique THz response is possible through various absorption mechanisms, including vibrational (phonon) and rotational spectra. The Drude-like response of materials allows for non-contact electrical conductivity measurements as well. In the additive and advanced manufacturing realm, high sampling rates (kHz) and ability to extract electrical conductivity and composition makes in-situ THz imaging and spectroscopy a prime candidate for monitoring melt-pool dynamics in metal 3D printers. The fiberization of pulsed lasers systems enables the use of THz radiation to monitor oxide layer growth and characterize microstructure in challenging environments, whether ex-situ (e.g. post irradiation hot-cells) or in-situ (e.g. Transient Test Reactor, TREAT), through time of flight measurements and unique vibrational spectra of materials, providing crucial data on previously out of reach processes. While security imaging using THz radiation is already employed in airport body scanners, further miniaturization and ruggedization of THz systems enables materials characterization during field operations, adding a necessary and complementary tool to the arsenal of spectroscopic technologies available to the military and first responders. Cybersecurity is also a major focus for the coming decades; the use of THz interrogation methods to monitor integrated circuit operations provides a non-contacting, undetectable probe for system verification.

36 MATERIALS SCIENCE↗

Proton Radiography of a Laser-Driven Cylindrical Implosion

A recent experiment was performed at the Rutherford Appleton Laboratory (UK) to study fast electron propagation in cylindrically compressed targets, a subject of interest for fast ignition. This experiment was performed in the framework of the experimental road map of the Hiper project (the European High Power laser Energy Research facility Project). In this experiment, protons accelerated by a pecosecond laser pulse have been used to radiograph a 220 {mu}m-diameter, 20 {mu}m-wall cylinder filled with 0.1 g/cc foam, imploded with approx200 J of green laser light in 4 symmetrically incident beams of pulse length 1 ns. Point projection proton backlighting was used to measure the compression degree as well as the stagnation time. Results were compared to those from hard X-ray radiography. Finally, Monte Carlo simulations of proton propagation in the cold and in the compressed targets allowed a detailed comparison with 2D numerical hydro simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PLATE WAVE RESONANCE WITH AIR-COUPLED ULTRASONICS

Air-coupled ultrasonic transducers can excite plate waves in metals and composites. The coincidence effect, i.e., the wave vector of plate wave coincides with projection of exciting airborne sound vector, leads to a resonance which strongly amplifies the sound transmission through the plate. The resonance depends on the angle of incidence and the frequency. In the present study, the incidence angle for maximum transmission (theta{sub max}) is measured in plates of steel, aluminum, carbon fiber reinforced composites and honeycomb sandwich panels. The variations of (theta{sub max}) with plate thickness are compared with theoretical values in steel, aluminum and quasi-isotropic carbon fiber composites. The enhanced transmission of air-coupled ultrasound at oblique incidence can substantially improve the probability of flaw detection in plates and especially in honeycomb structures. Experimental air-coupled ultrasonic scan of subtle flaws in CFRP laminates showed definite improvement of signal-to-noise ratio with oblique incidence at theta{sub max}.

36 MATERIALS SCIENCE↗