Search NASA⌕ Search

SEARCH · Search NASA

Results for “Normal Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Grid Forming Inverter With Increased Short-Circuit Contribution to Address Inverter-Based Microgrid Protection Challenges

Substantial differences in fault levels between grid-tied and islanded modes is one of the primary challenges of microgrid protection. During grid-tied mode, the bulk grid provides significant short-circuit, while during islanded operation the short-circuit magnitude is small due to inverter-based resources limiting their current output close to nominal ratings. Consequently, conventional distribution protection strategies based on overcurrent cannot reliably protect microgrids when operating in islanded mode. Fuses and circuit breakers are particularly affected because of their inverse characteristics. Presently, the absence of affordable solutions for protecting microgrids in islanded mode leads to microgrids shutting down during electrical faults. The contribution of this article is two-fold. The first innovation proposes specific hardware modifications to grid-forming inverters to increase their short-circuit current during electrical faults. The second innovation introduces a novel control strategy designed to preserve control stability margins even when the grid-filter saturates, ensuring sinusoidal output currents under normal and fault conditions. Through experimental results, the inverter with the proposed modifications can provide more than three-times its nominal current during electrical faults. For the prototype testbed, this was sufficient to enable the use of traditional legacy overcurrent protection, achieving the fuse-to-relay and relay-to-relay minimum coordination time for the line-to-ground, line-to-line to ground, and three-phase electrical faults.

42 ENGINEERING↗
DOE OSTI2024

Alternating conduction and convection drying of paper – an experimental analysis with a continuous data acquisition approach

In conventional multi-cylinder drying of paper and board, both conductive drying from steam-heated dryer cylinders and convective drying by flowing air over the paper surface in the pockets are used. Conductive drying from steam-heated drying cylinders is a critical component in providing the necessary thermal energy to paper and board as they dry. Steam temperature and internal and external resistances at the contacting surface are critical process parameters influencing the conductive drying process. An experimental setup was developed to study the alternating conductive and convective drying of paper and board. Paper sheet moisture, temperature, and temperature distribution within the heated platen and the instantaneous heat flux as the sheet was being dried were measured. The instantaneous heat flux, contact heat transfer coefficient, and drying rates were determined as drying proceeds. Experimental results, as well as comparisons to literature and commercial data, are presented. The conductive heat transfer coefficients determined were compared to traditional correlations normally used in the modeling of paper drying. Similarly, the convective heat and mass transfer coefficients are also determined and compared to literature data. In addition to the evaluation of alternating conductive and convective drying characteristics of paper and board, the potential inclusion of auxiliary energy components will also be included. Experimental results from the conduction and convection drying system are presented. Furthermore, this data will be useful in process development, intensification of manufacturing processes, and modeling and simulation of paper drying processes.

42 ENGINEERING↗
DOE OSTI2026

Opportunities for imaging light nuclei with a second interaction region at the Electron-Ion Collider

The upcoming Electron-Ion Collider (EIC) will address several outstanding puzzles in modern nuclear physics. Key questions—such as the partonic structure of nucleons and nuclei and the origin of their mass and spin—can be explored through high-energy electron-proton and electron-nucleus collisions. Here, to maximize its scientific reach, the EIC community has advocated for the addition of a second interaction region equipped with a detector complementary to the EIC general purpose collider detector, ePIC. The preconceptual design of this interaction region aims to provide a different configuration from the first interaction region, which enhances forward acceptance at very small scattering angles (𝜃 ∼0 mrad). This machine configuration would significantly benefit exclusive, tagging, and diffractive physics programs, complementing those of the ePIC experiment. In particular, accessing coherent diffractive processes on light nuclei by tagging of the full, intact nucleus is essential for mapping their spatial parton distributions. In this work, we present an exploratory study of the detection capabilities for light nuclei at a second EIC interaction region, with a detailed discussion of the accessible kinematic phase space and its implications for imaging.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Data for Roebuck et al. (2025), "Differences in dissolved organic matter composition between rivers and estuaries is conserved across freshwater and saltwater coastal regions"

Dissolved organic matter (DOM) in coastal surface waters influences local water quality and is an important component of biogeochemical cycling in coastal systems, but the processes that alter DOM composition along lower reaches of rivers and estuarine waters are poorly understood. Roebuck et al. (2025) leveraged a spatially distributed community sampling effort in coastal ecosystems across two regions to identify broad spatial drivers of surface water DOM composition and identify transferable trends between saltwater and freshwater coastal systems. Samples were collected by community members from 47 locations within the mid-Atlantic and Great Lakes coastal regions.This dataset includes:* A selection of commonly reported absorbance and fluorescence peaks normalized to dissolved organic carbon concentrations* Parallel factor output from the EC1 fluorescence datasets* A selection of commonly reported absorbance and fluorescence peaks * Spectral indices output from matlab script for absorbance and fluorescence datasets* CO2sys calculations of pH changes under varying temperatures and a constant salinity, DIC, and alkalinity concentrationAll data files are plain-text CSV (comma separated value) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Light-Promoted C(sp 3 )–C(sp 3 ) Reductive Elimination from Dialkyl NiII Complexes

Ni-catalyzed cross-coupling is a powerful strategy to forge C(sp 3 )–C(sp 3 ) bonds. Typically, to do so requires overcoming a challenging C–C bond-forming reductive elimination, often enabled by the intermediacy of highly oxidized Ni species or outer-sphere processes. While direct C(sp 3 )–C(sp 3 ) reductive elimination from the Ni II base oxidation state is normally thermally inaccessible, light-activation provides an avenue to affect such transformations. Here, we investigate the mechanism of light-induced C(sp 3 )–C(sp 3 ) bond formation from dialkyl bipyridine Ni II complexes through a variety of organometallic, spectroscopic, and computational studies. Wavelength-dependent quantum yields, ligand electronics–reactivity relationships, excited-state lifetimes, computed barriers, and product distributions from crossover studies support a photolysis/radical rebound mechanism. Furthermore, this reactivity paradigm complements existing strategies in the literature to promote reductive elimination from Ni II , such as the use of destabilizing, sterically hindered ligands and reduction of electron density at Ni through the binding of electron-deficient olefins. Hence, we envision that light-induced reductive elimination may enable the development of challenging C(sp 3 )–C(sp 3 ) couplings.

Alkyls↗
DOE OSTI2026

LandCast Mosaic: Reconstructing Global Population Distributions, 1975-2025

LandCast Mosaic (LCM) provides a global, high-resolution gridded population dataset spanning 1975–2025, representing annual, scenario-consistent estimates of daytime, nighttime, and ambient population distributions. LCM builds on the 2025 LandScan Mosaic (LSM) population data by backcasting to earlier years using historical changes in built-surface area derived from the Global Human Settlement Layer (GHSL) and authoritative population counts from international datasets. The workflow scales 2025 building-informed gridded population estimates according to observed changes in built surface, applies linear interpolation for intermediate years, and normalizes estimates to match administrative- and country-level totals. The resulting dataset offers consistent, globally gridded population estimates over fifty years, suitable for temporal analyses of population dynamics, disaster risk modeling, and urban planning applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Study of Nuclear Structure Functions at Jefferson Lab

This thesis presents a study of nuclear modification of quark distributions (the EMC effect) using inclusive electron-scattering data from Jefferson Lab Hall C, with emphasis on experiment E12-10-008 (XEM2). The analysis spans nuclei from light to heavy targets and combines measurements at multiple spectrometer settings to constrain EMC ratios over a broad range in Bjorken-x and Q2. A complete analysis framework was developed to extract charge-normalized and efficiency-corrected yields, including detector calibrations, beam-current calibration, density-loss corrections for cryogenic targets, background subtraction, radiative and Coulomb corrections, and systematic studies. Instrumental cross-checks, including HMS–SHMS comparisons and reconstruction studies, show that residual spectrometer differences are predominantly multiplicative in the kinematic region relevant to the EMC analysis. The extracted EMC ratios are broadly consistent with previous measurements while extending coverage across many nuclei. The EMC slope increases from light to heavy nuclei and shows signs of saturation at large A. After accounting for the dominant A dependence, the results are consistent with no isospin dependence, but also consistent with the predicted modification from the isovector model.

Sharda, Abhyuday [Univ. of Tennessee, Knoxville, T↗
DOE OSTI2026

Characterizing core and edge turbulence regimes with fluctuation imaging diagnostics in Wendelstein 7-X

Two density fluctuation imaging systems, phase contrast imaging (PCI) and gas puff imaging (GPI) measure spatially resolved density fluctuations with high time resolution throughout the core plasma (PCI) and in the scrape-off layer (GPI) of the Wendelstein 7-X (W7-X) stellarator. Both systems combined give a comprehensive overview of overall fluctuation levels, spectral properties such as their distribution in frequency and wavenumber space as well as their spatial distribution. These tools are used to assess changes in density turbulence in three representative discharges that transition into stable divertor detachment by different strategies (impurity seeding, density ramping and power starvation). Several general trends are identified when the radiated power fraction is systematically increased: In the plasma edge, the line emission observed by GPI shifts radially inward with a drop in electron temperature, and normalized intensity fluctuation profiles follow this inward shift. Skewness and kurtosis of these edge fluctuations are reduced, indicating a reduction of large intermittent transport events, and poloidal phase velocities decrease in magnitude. These observations are consistent with a reduced power input into the plasma edge and a general reduction of turbulent activity. Core density fluctuation levels remain nearly constant in the impurity seeding scenario, indicating that detachment does not significantly impact turbulence there. However, a strong reduction in the dominant outboard fluctuation phase velocity is observed that deviates from the previous interpretation of neoclassical radial electric field changes, showing that the core plasma is not completely unaffected. In the density ramp and power starvation scenarios, undesirable and irregular large-scale events arise clearly in both diagnostic systems as the radiative fraction is increased. Impurity seeding therefore seems to be a promising strategy on W7-X to achieve detachment without significantly altering core turbulence, especially when targeting a specific operating point in core density and heating power.

Wendelstein 7-X↗
DOE OSTI2025

High-dimensional maximum-entropy phase space tomography

Reconstructing 4D or 6D phase space distributions from 1D or 2D measurements is a challenging inverse problem encountered in particle accelerators. Entropy maximization is an established method to incorporate prior information in the reconstruction, but it is typically infeasible in high-dimensional spaces. In this paper, I review two recent approaches to high-dimensional entropy maximization. The first approach utilizes differentiable simulations and a class of generative models known as normalizing flows, whereas the second approach employs the method of Lagrange multipliers and Markov Chain Monte Carlo (MCMC) sampling. My aim is to provide a short explanation of each method using a common notation. I conclude by mentioning several unsolved problems in phase space tomography.

Hoover, Austin [ORNL] (ORCID:0000000153136962)↗
DOE OSTI2026

Mechanistic Modeling of TEG Dehydrator Emissions in Oil and Gas Industry

This work presents a mechanistic modeling approach for simulating methane emissions from triethylene glycol (TEG) dehydrators used in oil & gas (O&G) operations. The model was developed as a modular component of the Mechanistic Air Emissions Simulator (MAES) tool, incorporating species-specific absorption and emission dynamics through two-level, second-order polynomial regression (PR) models trained on ProMax simulation data: (1) species-level regression models that track the transfer rates of individual gas species within the dehydrator unit streams, and (2) outlet flow stream regression models that predict the fraction of inlet gas distributed among the outlet streams of the dehydrator unit. These behaviors were characterized over a range of glycol circulation ratios, wet gas pressures, and temperatures. The model was validated using root mean square error (RMSE) analysis. The species-level PR achieved low root mean square error (RMSE) values (<0.03) for light hydrocarbon species across all dehydrator components, ranging from 0.0009 for methane to 0.029 for normal pentane. Similarly, the outlet-level PR yielded RMSE values below 0.002 for the dry gas fraction, 0.001 for the flash tank fraction, and 0.002 for the still vent fraction, demonstrating strong agreement between predicted and reference ProMax values. When deployed at field facilities, the model significantly improved MAES-simulated dehydrator emissions, revealing that gas-assisted glycol pump emissions are the dominant contributors to both dehydrator-level and site-level methane emissions under uncontrolled conditions. Further analysis of the 154 dehydrator units reported by operators under the AMI 2024 project showed that 54 units (31%) used gas-driven glycol pumps, of which 6 units (11%) operated with uncontrolled flash tanks, and 22 units (40.7%) were identified as potentially oversized. Of the six dehydrator units with uncontrolled gas-assisted pumps, pump emissions accounted for 90.25% of total dehydrator emissions and 63.10% of total site-level emissions. These findings highlight substantial opportunities for emissions mitigation through equipment upgrades.

MAES↗
DOE OSTI2024

On the Interplay Between Distributed Bulk Plasticity and Local Fault Slip in Evolving Fault Zone Complexity

Abstract We numerically investigate the role of plastic strain accumulation on the mechanical response of a planar strike‐slip fault. Our models show that fault‐zone strength significantly impacts the ensuing sequence of earthquakes. Weaker fault zones accumulating more plastic strain promote more complexity in the seismicity pattern through aperiodic earthquake occurrences and intermittent episodes of rupture and arrest. However, if the fault zone strength is high enough, the overall earthquake sequence is characterized by periodic fault‐spanning events. We find that both the fault normal stress and the fault geometric profile evolve throughout the earthquake sequence, suggesting a self‐roughening mechanism. Despite the significant impact of plasticity on the fault response, the width of the plastically deforming region in the fault zone is small compared to the fault length. Our results suggest a rich behavior in dynamically evolving fault zones and support the need for further high‐resolution studies of the highly non‐linear near‐fault region.

Geology↗
DOE OSTI2026

Data for "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid"

This repository contains source data for key plots presented in the manuscript "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid." Experimental data that was analyzed in Igor Pro 8 are presented as the .pxp files used to generate individual sub-plots. Electronic spectral function calculations are provided as .txt files, in which consecutive rows refer to the meshgrid x coordinate, y coordinate, spectral function (and, where relevant, axis-projected local angular momentum). We additionally include the Wannier model and DFT-obtained bulk band structure on which the Wannier model was based. Files are named as the number of the figure in the manuscript to which they correspond, with additional details included where necessary. Details of file names: 2a_DOS_Lxz_Ek_KGM_40layer_xnum_800kpt_tot.txt: Density of states, xz-axis projected local orbital angular momentum, for 800 points along the K-Gamma-M path, for a 40-layer model. 2c_composite_y.pxp: ARPES (angle-resolved photoemission spectroscopy) spectra along the ky axis, including both a scan near the Fermi level and a scan at high kinetic energies. 2d_LCP_RCP_diff_Sect_20K.pxp: difference between ARPES constant energy cuts at T=20 K at E0 + 0.23 eV taken with left- and right-circularly polarized photons. The polarization-integrated intensity at the constant energy cut is also included. 2e_DOS_L45_E11pt79_m0pt25to0pt25_xnum_800kpt_tot.txt: Density of states, xz-projected local orbital angular momentum, and corresponding k-points in two dimensions from ab-initio electronic structure calculations for a constant-energy cut. 3a_[x]_[y]ps: ARPES cut under excitation at a fluence of x uJ/cm2, measured y ps after photoexcitation. Measurements were performed at 9 K. 3b_[x]: Energy distribution curves under excitation at a fluence x uJ/cm2 at selected delay times after photoexcitation. 4a_ImSigma_vs_temperature.pxp: Imaginary self energy (extracted from ARPES linewidths) at different energies above E0 for selected lattice temperatures. 4b_EELS_lowE.pxp: Electron energy loss spectrum over a low energy range 5b_diff_55m15.pxp: Difference between momentum-integrated Tr-ARPES traces at 55 uJ/cm2 and 15 uJ/cm2 photoexcitation. Time-dependent intensity at each energy level has been normalized to a maximum of 1 for each individual fluence prior to subtraction. 5d_invtau_at_EX_vs_fluence.pxp: decay rate at a specified energy EX for different excitation fluences, from single exponential fits. NOTE: Analyses based on the Wannier model presented here should cite both the associated Article and this dataset. For all other files in the repository, citing the dataset alone is sufficient.

Acharya, Rishi [University of Illinois] (ORCID:000↗
DOE OSTI2025

DISTRI: Distributed Multi-Facility HPC Simulator (DISTRI) v2.1

DISTRI is an advanced network simulator designed for multi-facility computational infrastructures with agentic behavior. It simulates HPC facilities where computational resources act as autonomous agents, making intelligent decisions about job scheduling, load balancing, and resource allocation. The simulator focuses on developing and testing decentralized algorithms that promote resilience and efficiency in multi-facility environments. Key Features: - Agentic Resource Behavior: Processors and DTNs act as autonomous agents with decision-making capabilities - Pheromone-Based Load Balancing: Decentralized load balancing inspired by ant colony optimization - Dual Topology Support: Mesh (normal operations) and Dumbell (network testing) topologies - Comprehensive TCP Simulation: Realistic TCP implementations with multiple congestion control algorithms - Failure Resilience Testing: Processor failure simulation with automatic job reassignment - Extensive Visualization: Detailed performance analysis and metrics collection - Research-Ready: Designed for algorithm development and benchmarking

Bez, Jean Luca [Lawrence Berkeley National Laborat↗
DOE OSTI2025

Gas tungsten arc welding and post weld heat treatment effects on microstructure and mechanical property of castable nanostructured alloy steel

Here, this paper details the first study of castable nanostructured alloy (CNA) steel gas tungsten arc weldability and the post-weld heat treatment (PWHT) effects. Effects of welding heat input, thermal cycles, and PWHT on microstructures, microhardness distributions, room temperature tensile properties, and fracture characteristics are discussed. Results show that CNA steel exhibits excellent weldability (i.e., no indication of welding defects and reasonable tensile properties). The welded joint exhibited heterogeneous microstructures with δ-ferrite as well as large microhardness variation and fluctuation. The welded joint yield and ultimate tensile strengths were similar to those of the base metal, but the elongations decreased by 30 %. However, with normalization and tempering PWHT, the δ-ferrite was eliminated, microstructure was modified, hardness was unified, and joint ductility was restored. The study indicated that the CNA reduced-activation ferritic-martensitic steel owns excellent weldability, and PWHT is needed for the industrial application of welded structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A small core in Vesta inferred from Dawn’s observations

Vesta’s large-scale interior structure had previously been constrained primarily using the gravity and shape data from the Dawn mission. However, these data alone still allow a wide range of possibilities for the differentiation state of the body. The moment of inertia is arguably the most diagnostic parameter related to the radial density distribution of a planetary body, making it crucial for assessing the body’s state of internal differentiation. Determining the moment of inertia requires additional measurements of the amplitudes of small rotational motions, such as precession and nutation. Here we report an updated estimate of the moment of inertia of Vesta inferred from Dawn’s Doppler tracking via the Deep Space Network and onboard imaging data. The recovered value for Vesta’s normalized polar moment of inertia is $\overline{C}$/MR 2 = 0.4208 ± 0.0047 (where M is the mass of Vesta and R is the reference radius), which is only 6.6% lower than the homogeneous value of 0.4505. This value, combined with the gravity field and global shape, suggests that Vesta’s interior has limited density stratification beneath its howardite–eucrite–diogenite-dominated crust. We propose two possible origin scenarios that are consistent with the observed constraints. In the first scenario, Vesta’s interior did not undergo full differentiation due to late accretion. In the second scenario, Vesta originated as an impact remnant of a larger differentiated body re-accreted with non-chondritic bulk composition produced from a catastrophic impact. Vesta did not experience complete differentiation in either scenario, suggesting that its current state reflects a complex interplay between its accretion timing, thermal evolution, redistribution of 26 Al bearing melt and/or impact processes.

CNEOS 2014-01-08 bolide↗
DOE OSTI2024

NPFTURBULENCE: Turbulent Parameters by airborne measurements

The original data were collected during the field campaign of “Turbulent layers promoting New Particle Formation” experiment (NPFTURBULENCE; https://www.arm.gov/research/campaigns/aaf2024npfturbulence) over the Atmospheric Radiation Measurement (ARM) user facility's Southern Great Plains (SGP) atmospheric observatory (https://www.arm.gov/capabilities/observatories/sgp ) in north-central Oklahoma. The ARM Aerial Facility ArcticShark uncrewed aerial system (UAS, https://www.arm.gov/capabilities/observatories/aaf/uas) was based at Blackwell–Tonkawa Municipal Airport (IATA: BWL, ICAO: KBKN, FAA LID: BKN, 36.74475° N, 97.34918° W, 313.9 m MSL), for the field campaign from May 5 through May 29, 2024. The ArcticShark UAS performed 11 flights, including 10 research flights over the Central Facility of the ARM SGP to measure atmospheric state, turbulence, surface IR temperature and imagery, and aerosol number concentration and size distribution. The current data set presents a comprehensive collection of turbulent parameters in the atmospheric boundary layer or lower free troposphere based on airborne measurement throughout the field campaign. The primary instruments used to create the current data set were the Aircraft Integrated Meteorological Measurement System (AIMMS-30) and the fine-wire thermocouple probe. For user convenience, the current data set includes several parameters commonly used in turbulent research for normalization and/or scaling: atmospheric boundary-layer height, surface conditions, convective scales for temperature, and velocity, etc.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Compensating slice emittance growth in high brightness photoinjectors using sacrificial charge

Achieving maximum electron beam brightness in photoinjectors requires detailed control of the 3D bunch shape and precise tuning of the beam focusing. Even in state-of-the-art designs, slice emittance growth due to nonlinear space charge forces and partial nonlaminarity often remains non-negligible. In this work, we introduce a new means to linearize the transverse slice phase space: a sacrificial portion of the bunch’s own charge distribution, formed into a wavebroken shock front by highly nonlinear space charge forces within the gun, whose downstream purpose is to dynamically linearize the desired bunch core. We show that linearization of an appropriately prepared bunch can be achieved via strongly nonlaminar focusing of the sacrificial shock front, while the inner core focuses laminarly. This leads to a natural spatial separation of the two distributions: a dense core surrounded by a diffuse halo of sacrificial charge that can be collimated. Multiobjective genetic algorithm optimizations of the ultracompact x-ray free electron laser injector employ this concept, and we interpret it with an analytic model that agrees well with the simulations. In simulation, we demonstrate a final bunch charge of 100 pC, peak current ∼ 30 A, and a sacrificial charge of 150 pC (250 pC total emitted from cathode) with normalized emittance growth of < 20 nm rad due to space charge. This implies a maximum achievable brightness approximately an order of magnitude greater than existing free electron laser injector designs. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗