Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear Reactor Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Critical Experiments in Support of Current Reactors and Advanced Reactor Deployment [Slides]

Limited, specific needs exist to support current reactor fleet and fuel cycle. Primarily, MOX experiments representative of low burnup LWR fuel are needed. LEU+ power distribution measurements may also be useful. Advanced reactors present many challenges and opportunities. New fuel forms and associated processes lack validation. Initial core criticality calculations can be validated with appropriate, highly similar experiments. Transportation of LEU+/HALEU material will be essential, and will rely on new experiments to support validation

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

A combined theoretical-experimental investigation of thermal transport in low-dose irradiated thorium dioxide

During reactor operation, nuclear fuels are subject to extreme temperature and irradiation conditions which can significantly degrade the fuel's thermal transport properties. The reduction in thermal conductivity of the fuel as a result of irradiation-induced lattice defects is arguably the most important fuel performance metric in regard to reactor efficiency and safety. Because thorium dioxide (ThO2) is suitable as a model system for more complex materials such as UO2 and its mixed oxides, we present a theoretical investigation of thermal conductivity reduction seen in defect-bearing thorium dioxide and compare directly to experimental measurements. Phonon-mediated thermal transport of the fuel is modeled by a solution to the Boltzmann transport equation (BTE) for phonons. A cluster dynamics (CD) model for lattice defect evolution during irradiation predicts defect densities which are used as input to the BTE for modeling phonon-defect scatterings. Phonon scatterings by lattice defects include those from point defects and vacancy clusters and interstitial clusters of various sizes. The CD model is benchmarked against structural defect characterization of irradiated thorium dioxide using electron microscopy. Thermal conductivity predicted by the BTE model is compared to measured values for irradiated thorium dioxide specimens below room temperature to isolate effects of phonon-defect scattering from intrinsic 3-phonon processes, which dominate at higher temperatures. The computed conductivity values are in partial agreement at temperatures close to room temperature while slight deviations are observed at the lowest measured temperatures, suggesting that implemented phonon-defect scattering cross-section expressions may not be adequate for low temperatures. The presented work provides a necessary investigation of the influence of irradiation induced defects on fuel performance and represents a first step toward a full characterization of phonon mediated thermal transport in irradiated materials with complex defect microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

MSR Safety Adequacy Demonstration US Contributions Towards a Common Goal

Molten Salt Reactors (MSRs) are currently under development worldwide. The US government has been sponsoring development of MSR safety adequacy evaluation information and tools. The US is a member of the Generation IV International Forum (GIF) MSR provisional System Steering Committee (pSSC). MSR pSSC collaboration is limited to exchange of open-fundamental information. Information employed to assess reactor safety adequacy needs to remain open to external scrutiny. US entities continue to measure fuel salt thermophysical and thermochemical properties, which have now been released into an open database. Non-US entities also continue to measure and openly publish fuel salt thermophysical and thermochemical properties. US entities continue to perform MSR accident progression experiments and simulations, the results of which are being reported in the open, scientific literature. The demonstrations have not yet been at sufficient scale to necessitate international collaboration.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Methods of forming fuel rods comprising porous fuel materials

A method of forming a fuel rod for a nuclear reactor comprises disposing a powder comprising particles of a fuel material on a substrate, exposing the powder to energy from an energy source to form a first layer of a nuclear fuel, the first layer comprising inter-granular bonds between the particles of the fuel material, disposing additional powder comprising particles of the fuel material over the first layer of the nuclear fuel, and exposing the additional powder to energy from the energy source to form a second layer of the nuclear fuel and to form the nuclear fuel to have a void fraction greater than about 0.20, the second layer comprising inter-granular bonds between the additional powder and the first layer of the nuclear fuel. Related nuclear fuels comprising a porous structure, fuel rods, nuclear reactors, and methods are disclosed.

O'Brien, Robert C.↗
DOE OSTI2023

Fuel Salt Information Needed to Support Safety Adequacy Assessment [Slides]

This presentation provides an overview of the information needed to support fuel salt safety adequacy assessment. It provides a discussion of fuel salt qualification and developing a mechanistic source term. This presentation includes discussion the use of total stored energy release as a means to bound potential accidents.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

MSR Safety, Accident Scenarios, and Fuel Qualification [Slides]

Document provides an overview of MSR safety characteristics, evaluation methods, and liquid fuel salt qualification. The presentation will be provided at at DOE-NE - CEA discussion of potential collaboration topics held in conjunction with the final SAMOSAFER meeting.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Preliminary Study of Iodine Gas Removal in Sodium Pools

Potential iodine gas release from failed fuel pins is a critical factor in the source term analysis of oxide fuel-loaded sodium fast reactors (SFRs). The accumulated iodine-containing gas mixtures inside pin plenums are expected to be ejected during pin failures and rise through sodium pool, with potential release of gaseous iodine to the cover gas region. Due to its potential radiological impacts, a proper assessment of iodine behavior is necessary for an accurate source term assessment. Throughout the bubble rise trajectory in the sodium pool, iodine gas is continuously removed or transformed at the bubble interface by diffusion, as the combining reaction between the iodine and sodium to form sodium iodide (NaI) is a chemically preferred process. As the final amount of iodine released from the facility is strongly influenced by the removal phenomenon inside the sodium pool, experiments were previously performed by PNC (Power Reactor and Nuclear Fuel Development Corporation) to provide insight into this phenomenon. To assess the accuracy of present methods for predicting iodine gas removal within sodium pools, several candidate approaches, available in source term analysis codes, have been summarized and evaluated in this study. Spherical cap bubbles and spherical bubbles are considered in accordance with the methods adopted in each approach, and different forms of correlations for major parameters have been implemented in accordance with the original adoptions. Based on the summarized results, important aspects to be considered have been derived.

Decontamination↗
DOE OSTI2022

Development and Test Results of Thermocouples Used in the TRISO-Fuel Irradiation Experiment AGR-5/6/7

High-temperature gas reactor irradiation experiments create unique challenges for thermocouple-based temperature measurements. High-temperature industrial thermocouples suffer rapid decalibration due to transmutation of the thermoelements from neutron absorption. For lower-temperature applications, Type K and Type N thermocouples are affected by neutron irradiation only to a limited extent. But until recently, the use of these nickel-based thermocouples was limited when the temperature exceeded 1050°C due to drift related to phenomena other than nuclear irradiation. Certain portions of the AGR-5/6/7 experiment experienced temperatures higher than any of the previous AGR tests, up to 1500°C. Recognizing the limitations of existing thermometry to measure such high temperatures, the sponsor of the AGR-5/6/7 test supported a development and testing program for thermocouples capable of low-drift operation at temperatures above 1100°C. This program included additional development of high-temperature irradiation-resistant thermocouples based on molybdenum/niobium thermoelements, which have been studied at Idaho National Laboratory since circa 2004. A step change in accuracy and long-term stability of this thermocouple type was achieved as part of the AGR-5/6/7 thermometry development program. Additionally, long-term testing (7000+ h) at 1250°C of Type N thermocouples utilizing a customized sheath developed at the University of Cambridge has been completed with excellent low-drift results. The results of this testing as well as testing of the improved high-temperature irradiation-resistant design are reported herein. Both the improved high-temperature irradiation-resistant and the Cambridge Type N thermocouple types were incorporated into the AGR-5/6/7 test, which began irradiation in February 2018 and was completed in July 2020. Finally, a summary of the performance of the thermocouples incorporated into the AGR-5/6/7 test is included herein.

In-pile instrumentation↗
DOE OSTI2024

Fuel Storage Requirements

2023 No fuel storage plan had been developed 2024 The shipping & receiving requirements are understood A storage location has been selected and designated The storage limitations are known and incorporated The INL coordination & approval groups have been determined

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Numerical implementation of the MOOSE subchannel module (SCM) algorithm

The subchannel module of moose (SCM), previously referred to as Pronghorn-SC, is a subchannel code designed to resolve single-phase flow fields and calculate the relevant flow variables, in nuclear reactor fuel-pin assemblies. The assemblies it models are: water-cooled, with bare fuel-pins in a square ducted, quadrilateral lattice and liquid-metal/water-cooled, with bare/wire-wrapped fuel pins in a hexagonal ducted, triangular lattice. Previous publications have presented the development, validation and verification of SCM. This work presents an comparative overview of the different solvers implemented within SCM. This includes the solver algorithm description, and a performance comparison. The two test cases chosen to demonstrate the solver performance were taken from the PSBT enthalpy mixing benchmark and the ORNL-19 pin benchmark.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Thermal diffusivity and thermal conductivity of SiC composite tubes: the effects of microstructure and irradiation

Cladding thermal conductivity is an important physical property in assessing the performance of silicon carbide (SiC)-cladded fuels for nuclear reactors. However, there is a significant lack of reliable data, particularly for irradiated materials, because the geometry complicates the measurement. This study investigates the thermal diffusivity of coupons with a curvature, machined from SiC fiber–reinforced SiC matrix composite tubes, with and without neutron irradiation under light water reactor–relevant temperature and dose conditions. The tested materials included full composite and duplex SiC composite tubes. The measurements were conducted using a modern flash diffusivity apparatus. The analyzed area on the specimen during diffusivity testing was reduced for improved measurement accuracy due to sample curvature. Post-irradiation measurements showed that the effects of neutron irradiation on thermal conductivity (e.g. thermal defect resistivity) are different between SiC composite plates versus tubes. The difference was explained by higher matrix density of the tube than the plate. This study provides reliable thermal properties of prototypic SiC composite tubes useful for fuel performance modeling of SiC-based cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Fuel Flow Modeling under Thermal Fluidics Considerations within Operational Domains of Molten Salt Reactors

Molten Salt Reactors (MSRs) offer significant versatility supported by their design flexibility and safety advantages due to high temperatures, design customization capabilities, strong negative reactivity feedback effects, and salt chemistry characteristics. Different control schedules and different mass flow rates in the MSR primary systems impact neutronics and thermal hydraulics coupling. The result is two-fold. First, it leads to adaptability in various applications when the customization of a MSR unit is desired. Second, it calls for the quantification of dynamics and safety characteristics to assess the operational domain and make sure reactor stability and inherent safety characteristics are maintained. This paper provides an in-depth transient analysis of the operational implications of MSRs having heat-generating fuel and heat-transporting salt mixed forming liquid fuel salts contained within primary systems. A coupling model was developed to simulate fuel flow in molten salt reactors. A zero-dimensional reactor kinetics model was used with a one-dimensional heat transfer model in the reactor core. The temperature reactivity feedbacks of the fuel salt resulting from the thermal-hydraulics model were used in the reactor kinetics model to complete the coupled code. The model was applied to simulate the Molten Salt Breeder Reactor (MSBR) response at steady state and transients. The developed model was shown to be a suitable tool for the dynamic analysis of molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

POLCA8 - modelling of cross section variations inside hexagonal assemblies

This paper presents the POLCA8 approach for modelling non-constant cross section distributions inside hexagonal fuel assemblies. The multigroup diffusion equation is modified to account for intranodal cross section variations. The obtained equation is solved in a node-wise manner based on the Fourier expansion method. As a result of varying cross sections, the solution includes a particular part additionally to the homogeneous one. A method for obtaining the particular solution is derived. Numerical tests on a VVER-1000 core are presented showing the impact of cross-section variations to some key parameters for reactor operation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Remote Fiber Based Velocimeter For Interface Strength Measurements

The understanding of the performance of nuclear reactor plate fuels is essential when developing new fuel systems. The condition of pre and post irradiated plate fuels must be characterized effectively and efficiently prior to irradiation and then post irradiation within a high rad environment. The post characterization work must be performed remotely and in an environment hostile to instrumentation. Laser based characterization methods provide the capability to be remote and robust within a hot-cell environment. Laser based characterization can provide high spatial resolution appropriate for scanning and imaging large areas. The INL is currently developing a laser shock system for Post Irradiation Examination (PIE) station for use in the Hot Fuel Examination Facility (HFEF) at the INL. The laser shock system is designed to characterize fuel to cladding and cladding to cladding interface strength. The laser shock-technique induces large amplitude shock waves to mechanically characterize interfaces such as the fuel-clad interface. The shock wave propagates as a compressional wave through the fuel plate to the free (unconfined) backside surface and is reflected back through the test plate as a rarefaction (tensile) wave. This rarefaction wave is the physical mechanism that produces internal delamination failure. The focus or this paper is on the accurate measurement of surface velocity to quantify the amount of energy traveling through the interfaces to the back surface of the fuel plate. The original fiber based velocimeter design was biased by parasitic back reflections. This paper will discuss the discovery of the back-reflection issue and the design changes to resolve the issue. Supporting data will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Quantification of trace iodine using laser-induced breakdown spectroscopy for real-time monitoring of nuclear off-gas streams

This study evaluated the potential of laser-induced breakdown spectroscopy (LIBS) for real-time monitoring of trace gas-phase iodine, which is an element of high significance in nuclear applications due to its long radioactive half-life (as iodine-129), volatility, and biological impact. In anticipation of iodine evolving into off-gas systems in molten salt reactor and nuclear fuel recycling applications, this research aimed to assess LIBS performance in flowing argon and helium matrices; optimize measurement parameters using a multichannel spectrometer; and perform calibrations to assess predictive capabilities and limits of detection (LODs). Experimental results successfully measured gas-phase iodine in flowing argon and helium; however, trace iodine was not detected in air. Optimal delay times were determined to be 10 µs for argon and 1 µs for helium, which are consistent with the expected shorter plasma lifetime in helium relative to argon. An emission line survey was provided with the 206.16, 804.37, 902.24, and 905.83 nm peaks, which were identified as the strongest emission peaks. Calibration models were successfully built in both helium and argon, achieving LODs down to 3 ppm in helium and 5 ppm in argon. The iodine emission at 905.83 nm emerged as the most robust for calibration and was subsequently applied to a time series dataset in argon. The predictive trace confirmed the feasibility of employing LIBS for continuous, online quantification of trace iodine in flowing gas systems.

Andrews, Hunter B. [Oak Ridge National Laboratory ↗
DOE OSTI2026

Elemental analysis of air-sensitive frozen molten salt samples using an inert transfer chamber for LIBS/LA-ICP-TOF-MS analysis

A novel inert sample transfer system was developed and employed to enable, for the first time, the analysis of air-sensitive salt samples in a two-volume ablation cell using simultaneous laser-induced breakdown spectroscopy (LIBS) and laser ablation (LA)-inductively coupled plasma (ICP)-time-of-flight (TOF)-mass spectrometry (MS) analysis. Molten salts are of growing interest as a medium for advanced nuclear reactors and nuclear fuel reprocessing technologies continue to be developed around their use. However, compositional analysis of molten salt samples can be challenging because of their air-sensitive nature and varying solubilities leading to inaccurate measurements when digested. LA-based analysis provides an alternate method to digestion and can provide rapid elemental information with little sample preparation. In this study, LIBS and LA-ICP-TOF-MS were used to analyze the Ce content in frozen salt samples taken from a series of electrochemical experiments. Calibrations were built for each technique, and the resulting limits of detection for Ce were estimated to be 107 and 58 µg g −1 for LIBS and LA-ICP-TOF-MS, respectively. Test samples from the electrochemical experiments were analyzed using these calibrations. The results matched bulk digestion-based ICP-optical emission spectroscopy values, and daily trends in Ce concentration changes were identified. Additionally, the LIBS and LA-ICP-TOF-MS analysis was demonstrated for identifying microgram per gram levels of components and detecting trace contaminants. The impurities detected by LIBS included Al, Mg, Ca, and Na. The impurities detected by LA-ICP-TOF-MS included W, Ag, Al, Fe, Ni, Mo, Nd, Sm, Th, and U.

Andrews, Hunter B. [Oak Ridge National Laboratory ↗
DOE OSTI2023

Response of ZrC to swift heavy ion irradiation

Zirconium carbide (ZrC) is commonly used for energy sector research, as well as a surrogate for the proposed advanced nuclear fuel candidate uranium carbide. Here this study investigates structural modifications to nanocrystalline and microcrystalline ZrC resulting from dense electronic excitations induced by swift heavy ion exposure. Samples were irradiated with 946 MeV Au ions to various fluences up to 6 × 10 13 ions cm –2 and characterized using synchrotron-based x-ray diffraction. The evolution of the unit-cell parameter and heterogeneous microstrain were evaluated as a function of fluence and compared with those of nanocrystalline and microcrystalline CeO 2 (a surrogate for UO 2 fuel) irradiated under identical conditions. Distinct differences were observed in the radiation responses of the carbide and oxide across both grain sizes. Most notably, microcrystalline ZrC exhibits swelling characterized by two distinct regimes, which does not result in saturation at the ion fluences achieved. This contrasts with CeO 2 , which exhibits the well-documented direct-impact defect accumulation mechanism, reaching a steady-state saturation of swelling at higher fluences. Nanocrystalline CeO 2 undergoes more pronounced swelling compared with microcrystalline CeO 2 , in contrast to nanocrystalline ZrC, which exhibits only minimal unit-cell changes. These results demonstrate that swift heavy ion-induced structural changes can be quite different in carbides and oxides, which must be considered when extrapolating fission-fragment type damage in current fuels to advanced fuels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗