Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

JWST/MIRI Coronagraphic Performances as Measured on-Sky

Context . Characterization of directly imaged exoplanets is one of the most eagerly anticipated science functions of the James Webb Space Telescope . MIRI, the mid-IR instrument, has the capability to provide unique spatially resolved photometric data points in a spectral range never before achieved for such objects. Aims . We aim to present the very first on-sky contrast measurements of the MIRI coronagraphs. In addition to a classical Lyot coronagraph at the longest wavelength, this observing mode implements the concept of the four-quadrant phase mask for the very first time in a space telescope. Methods . We observed single stars together with a series of reference stars to measure raw contrasts as they are delivered on the detector, as well as reference-subtracted contrasts. Results . The MIRI coronagraphs achieve raw contrasts better than 10 −3 at the smallest angular separations (within 1″) and about 10 −5 farther out (beyond 5 ~ 6″). Subtracting the residual diffracted light left behind the coronagraph has the potential to bring the final contrast down to the background- and detector-limited noise floor at most angular separations (a few times 10 −5 at less than 1″). Conclusions . The MIRI coronagraphs behave as expected from simulations. In particular, the raw contrasts for all four coronagraphs are fully consistent with the diffractive model. Contrasts obtained by subtracting reference stars also meet expectations and are fully demonstrated for two four-quadrant phase masks (F1065C and F1140C). The worst contrast, measured at F1550C, is very likely due to a variation in the phase aberrations at the primary mirror during the observations, and not an issue with the coronagraph itself. We did not perform reference star subtraction with the Lyot mask at F2300C, but we anticipate that it would bring the contrast down to the noise floor.

High angular resolution instrumentation↗
NASA NTRS1996

A matched filter method for ground-based sub-noise detection of terrestrial extrasolar planets in eclipsing binaries: application to CM Draconis

The photometric detection of extrasolar planets by transits in eclipsing binary systems can be significantly improved by cross-correlating the observational light curves with synthetic models of possible planetary transit features, essentially a matched filter approach. We demonstrate the utility and application of this transit detection algorithm for ground-based detections of terrestrial-sized (Earth-to-Neptune radii) extrasolar planets in the dwarf M-star eclipsing binary system CM Draconis. Preliminary photometric observational data of this system demonstrate that the observational noise is well characterized as white and Gaussian at the observational time steps required for precision photometric measurements. Depending on planet formation scenarios, terrestrial-sized planets may form quite close to this low-luminosity system. We demonstrate, for example, that planets as small as 1.4 Earth radii with periods on the order of a few months in the CM Draconis system could be detected at the 99.9% confidence level in less than a year using 1-m class telescopes from the ground. This result contradicts commonly held assumptions limiting present ground-based efforts to, at best, detections of gas giant planets after several years of observation. This method can be readily extended to a number of other larger star systems with the utilization of larger telescopes and longer observing times. Its extension to spacecraft observations should also allow the determination of the presence of terrestrial-sized planets in nearly 100 other known eclipsing binary systems.

NASA Discipline Number 52-10↗
NASA NTRS2012

Validation of Satellite-Based Objective Overshooting Cloud-Top Detection Methods Using CloudSat Cloud Profiling Radar Observations

Two satellite infrared-based overshooting convective cloud-top (OT) detection methods have recently been described in the literature: 1) the 11-mm infrared window channel texture (IRW texture) method, which uses IRW channel brightness temperature (BT) spatial gradients and thresholds, and 2) the water vapor minus IRW BT difference (WV-IRW BTD). While both methods show good performance in published case study examples, it is important to quantitatively validate these methods relative to overshooting top events across the globe. Unfortunately, no overshooting top database currently exists that could be used in such study. This study examines National Aeronautics and Space Administration CloudSat Cloud Profiling Radar data to develop an OT detection validation database that is used to evaluate the IRW-texture and WV-IRW BTD OT detection methods. CloudSat data were manually examined over a 1.5-yr period to identify cases in which the cloud top penetrates above the tropopause height defined by a numerical weather prediction model and the surrounding cirrus anvil cloud top, producing 111 confirmed overshooting top events. When applied to Moderate Resolution Imaging Spectroradiometer (MODIS)-based Geostationary Operational Environmental Satellite-R Series (GOES-R) Advanced Baseline Imager proxy data, the IRW-texture (WV-IRW BTD) method offered a 76% (96%) probability of OT detection (POD) and 16% (81%) false-alarm ratio. Case study examples show that WV-IRW BTD.0 K identifies much of the deep convective cloud top, while the IRW-texture method focuses only on regions with a spatial scale near that of commonly observed OTs. The POD decreases by 20% when IRW-texture is applied to current geostationary imager data, highlighting the importance of imager spatial resolution for observing and detecting OT regions.

Bedka, Kristopher M.↗
NASA NTRS1975

On the problem of radar effectiveness of discriminating thunderstorms and clouds

Data are presented on the effectiveness of detecting clouds (within a radius of 40 km) and thunderstorms (within a radius of 300 km) with the aid of instrumental (WR) and visual (weather station net) observations in the operational service of aviation. Data obtained on a large statistical sample confirm the very great effectiveness of the radar method of observations for thunderstorms and clouds with precipitation. The origin of certain probabilities for detecting stratiform clouds without precipitation which are small compared with the data of other authors is explained.

Allenov, P. A.↗
NASA NTRS1996

Astrometry of Single-Chord Occultations: Application to the 1993 Triton Event

This paper outlines a method for reducing astrometric data to derive the closest approach time and distance to the center of an occultation shadow for a single observer. The method applies to CCD frames, strip scans or photographic plates and uses a set of field stars of unknown positions to define a common coordinate system for all frames. The motion of the occulting body is used to establish the transformation between this common coordinate system and the celestial coordinate system of the body's ephemeris. This method is demonstrated by application to the Tr6O occultation by Triton on 1993 July 10 UT. Over an interval of four nights that included the occultation time, 80 frames of Triton and Tr6O were taken near the meridian with the U.S. Naval Observatory (USNO) 61-inch astrometric reflector. Application of the method presented here to these data yields a closest approach distance of 359 +/- 133 km (corresponding to 0.017 +/- 0.006 arcsec) for the occultation chord obtained with the Kuiper Airborne Observatory (KAO). Comparison of the astrometric closest approach time with the KAO light-curve midtime shows a difference of 2.2 +/- 4.1 s. Relative photometry of Triton and Tr6O, needed for photometric calibration of the occultation light curve, is also presented.

Olkin, Catherine B.↗
NASA NTRS2015

Time Accurate Unsteady Pressure Loads Simulated for the Space Launch System at a Wind Tunnel Condition

Using the Fully Unstructured Three-Dimensional (FUN3D) computational fluid dynamics code, an unsteady, time-accurate flow field about a Space Launch System configuration was simulated at a transonic wind tunnel condition (Mach = 0.9). Delayed detached eddy simulation combined with Reynolds Averaged Naiver-Stokes and a Spallart-Almaras turbulence model were employed for the simulation. Second order accurate time evolution scheme was used to simulate the flow field, with a minimum of 0.2 seconds of simulated time to as much as 1.4 seconds. Data was collected at 480 pressure taps at locations, 139 of which matched a 3% wind tunnel model, tested in the Transonic Dynamic Tunnel (TDT) facility at NASA Langley Research Center. Comparisons between computation and experiment showed agreement within 5% in terms of location for peak RMS levels, and 20% for frequency and magnitude of power spectral densities. Grid resolution and time step sensitivity studies were performed to identify methods for improved accuracy comparisons to wind tunnel data. With limited computational resources, accurate trends for reduced vibratory loads on the vehicle were observed. Exploratory methods such as determining minimized computed errors based on CFL number and sub-iterations, as well as evaluating frequency content of the unsteady pressures and evaluation of oscillatory shock structures were used in this study to enhance computational efficiency and solution accuracy. These techniques enabled development of a set of best practices, for the evaluation of future flight vehicle designs in terms of vibratory loads.

Alter, Stephen J.↗
NASA NTRS1973

Determining optical depth in different parts of the Fraunhofer line contour

The method of approximate determination of the optical depth tau in the profile of the Fraunhofer line is considered. In the method the observed profile and allocation of tau to the temperature in the photosphere must be known. If the source function B prime (tau) in the line seems not to be equal to the Planck function, the dependence B prime (tau) on tau is needed. The method for the determination of B prime (tau) using the center-to-limb observations of the central intensities of the line is suggested.

Gurtovenko, E. A.↗
NASA NTRS1972

Determination of Burgers vectors in close-packed metals using g.b = 2 contrast.

Reexamination of dislocation images giving double contrast in the electron microscope for g.b = 2 as a possible means for Burgers vector determinations. In fcc foils which have been cut parallel to an active slip plane, the g.b = 2 criterion provides a quick positive Burgers vector analysis which can be carried out during observation. The method is also applicable to basal dislocations in hcp. A comparison between calculated two-beam profiles and experimental images in aluminum is discussed, and several commonly observed characteristics of g.b = 2 contrast are described.

Kestenbach, H.-J.↗
NASA NTRS1973

Identification and analysis of structures in the corona from X-ray photography

This paper summarizes the results of a program of rocket observations of the solar corona with grazing incidence X-ray telescopes. A series of five flights of a Kanigen-surfaced telescope with a few arc seconds resolution, together with the first flight of a newer telescope have resulted in the identification of six classes of coronal structures observable in the X-ray photographs. These are: active regions, active region interconnections, large loop structures associated with unipolar magnetic regions, coronal holes, coronal bright points, and the structures surrounding filament cavities. Two solar flares have been observed. The methods involved in deriving coronal temperature and density information from X-ray photographs are described and the analysis of a bright active region (McMath plage 11035) observed at the west limb on November 24, 1970 is presented as an example of these techniques.

Vaiana, G. S.↗
NASA NTRS1994

Monitoring Mars with the Hubble Space Telescope: 1990-1991 observations

Images of Mars obtained using the Planetary Camera on the Hubble Space Telescope during 1990 and 1991 are described and analyzed. Multispectral images of Mars record the martian season between L(sub s) = 348 deg and 60 deg corresponding to late winter and spring in the northern hemisphere. The wavelengths of these observations varied between 230 nm in the ultraviolet and 890 nm in the near infrared. We use these images to discuss atmospheric and polar phenomena, to constrain the aerosols and ozone in the martian atmosphere, and to compare surface albedo features within this data set as well as with previous observations. Two methods are used to constrain the opacity of the martian atmosphere: comparisons of ultraviolet images with atmospheric scattering models and examination of contrast changes of surface features observed at visible wavelengths. Our observations are consistent with a Mars which was quite different from the planet when it was viewed by Viking; we estimate an upper limit of 0.1 for equatorial dust opacity near vernal equinox, compared to values of 0.4 to 0.5 measured in Chryse by Viking Lander 1. Later, at L(sub s) = 60 deg, and upper limit of 0.2 was found for dust in the southern hemisphere. Except for suggestions of local dust activity near the north polar cap in late spring, there was no visual evidence of dust storms on the planet. The Hartley band of ozone is within the F230W filter bandpass, and the 230W/336W ratio is therefore sensitive to ozone. High latitude ozone is observed at a concentration similar to that observed by Mariner 9; a seasonal dependence in ozone concentration was observed with concentration decreasing at northern arctic latitudes and increasing at southern midlatitudes as L(sub s) increases from 350 deg to 60 deg. Despite the difference in dust loading, the behavior of condensate clouds and the recession of the north polar cap are consistent with those observed during Viking years. Late winter images of the north polar region reveal an active north polar hood with a maximum (UV) opacity of about 0.25 near 50 deg latitude; the hood seems to have an annular form, with the central, polar regions having smaller opacity. Clouds observed in the northern hemisphere to the south of the hood boundary are suggestive of fronts similar to those observed during the Mariner 9 mission. A diurnal variation in the hood clouds which is (anti) correlated with the amount of water vapor in the atmosphere is noted. Images were deconvolved using the Richardson-Lucy iterative algorithm to remove the defocussing effects of the spherical aberration of the HST primary. Even when Mars subtended less than 5 arcsec, in May 1991, the images were scientifically useful and comparable to photographic images obtained at opposition. Although the data are subject to the solar pointing constraint for HST, the relatively slow movement of the allowed observation window, which is more than one half martian year, with respect to the martian seasons will permit us to address the question of major variations in the martian atmosphere.

James, Philip B.↗
NASA NTRS1999

Microstructural Development of Directionally Solidified Hg(1-x)Zn(x)Se Alloys

Hg(1-x)Zn(x)Se alloys have been studied as an alternative to Hg(1-x)Cd(x)Te for the detection of electromagnetic radiation, because the shorter ZnSe and HgSe bonds have been predicted to improve lattice stability. Several ingots with x = 0.1 were directionally solidified using a modified Bridgman-Stockbarger method; one was grown in an applied magnetic field, which greatly reduced radial compositional variations. A method was developed to reduce wetting. This, combined with the convex liquid-solid interface shape, produced boules that were single crystalline after growing about 3.5 cm. Observed surface features indicated ampoule wetting was eliminated using a graphite getter. Microstructural characteristics were greatly improved over HgCdTe alloys. In six boules, a total of only one twin was observed. A method for polishing and producing dislocation etch pits was developed for these alloys, revealing dislocation etch pit densities one to two orders of magnitude less than HgTe-based alloys. A kink in the thermal profile during processing of one boule generated more dislocations than did lattice mismatch due to compositional variations. This alloy has improved microstructural properties and resistance to dislocation formation compared with similar II-VI alloys.

Cobb, S. D.↗
NASA NTRS1983

A new calibration of the extragalactic distance scale using Cepheids and RR Lyrae stars

Visual absolute magnitudes of classical Cepheids, metal-poor RR Lyrae stars and short-period type II Cepheids have been determined with very high precision by combining a large number of old and new astrophysical data. Five independent methods (four observational and one theoretical) have been successfully used: (1) secular and statistical parallaxes; (2) moving-group parallaxes; (3) cluster main-sequence fitting; (4) the Baade-Wesselink method and its modifications; and (5) light-curve and velocity-curve fitting (the theoretical method). With these five adopted methods, the zero point of the galactic and extragalactic distance scale can be set on a relatively firm and self-consistent basis. Classical Cepheids and RR Lyrae stars now provide essentially identical distances to nearby galaxies: the distance modulus to the Large Magellanic Cloud is 18.5 and to the Small Magellanic Cloud is 18.8, both with an uncertainty of 0.1. The distance to the center of our Galaxy is 8.6 plus or minus 0.5 kiloparsecs. The major uncertainty in these values lies in the correction for interstellar extinction.

Stothers, R. B.↗
NASA NTRS1925

Astronomical Methods in Aerial Navigation

The astronomical method of determining position is universally used in marine navigation and may also be of service in aerial navigation. The practical application of the method, however, must be modified and adapted to conform to the requirements of aviation. Much of this work of adaptation has already been accomplished, but being scattered through various technical journals in a number of languages, is not readily available. This report is for the purpose of collecting under one cover such previous work as appears to be of value to the aerial navigator, comparing instruments and methods, indicating the best practice, and suggesting future developments. The various methods of determining position and their application and value are outlined, and a brief resume of the theory of the astronomical method is given. Observation instruments are described in detail. A complete discussion of the reduction of observations follows, including a rapid method of finding position from the altitudes of two stars. Maps and map cases are briefly considered. A bibliography of the subject is appended.

Beij, K Hilding↗
NASA NTRS2002

An Introduction to High-Energy Astrophysics: Detectors, Techniques and Missions

A series of lectures will be given to acquaint the amateur astronomer with historical, present and future methods of observation in high-energy astrophysics. These will begin with the basic principles of how photons of high energy are detected and their energy measured. The detectors and data distribution methods will be described. Finally, a comprehensive description of the experiments and missions in high-energy astrophysics will be reviewed.

Fishman, Gerald J.↗
NASA NTRS2005

Fracture Toughness in Advanced Monolithic Ceramics - SEPB Versus SEVENB Methods

Fracture toughness of a total of 13 advanced monolithic ceramics including silicon nitrides, silicon carbide, aluminas, and glass ceramic was determined at ambient temperature by using both single edge precracked beam (SEPB) and single edge v-notched beam (SEVNB) methods. Relatively good agreement in fracture toughness between the two methods was observed for advanced ceramics with flat R-curves; whereas, poor agreement in fracture toughness was seen for materials with rising R-curves. The discrepancy in fracture toughness between the two methods was due to stable crack growth with crack closure forces acting in the wake region of cracks even in SEVNB test specimens. The effect of discrepancy in fracture toughness was analyzed in terms of microstructural feature (grain size and shape), toughening exponent, and stable crack growth determined using back-face strain gaging.

Choi, S. R.↗
NASA NTRS2006

Assessments of Fracture Toughness of Monolithic Ceramics-SEPB Versus SEVNB Methods

Fracture toughness of a total of 13 advanced monolithic ceramics including silicon nitrides, silicon carbide, aluminas, and glass ceramic was determined at ambient temperature by using both single edge precracked beam (SEPB) and single edge v-notched beam (SEVNB) methods. Relatively good agreement in fracture toughness between the two methods was observed for advanced ceramics with flat R-curves; whereas, poor agreement in fracture toughness was seen for materials with rising R-curves. The discrepancy in fracture toughness between the two methods was due to stable crack growth with crack closure forces acting in the wake region of cracks even in SEVNB test specimens. The effect of discrepancy in fracture toughness was analyzed in terms of microstructural feature (grain size and shape), toughening exponent in R-curve, and stable crack growth determined using back-face strain gaging.

Choi, Sung R.↗
NASA NTRS2012

Model-Based Method for Sensor Validation

Fault detection, diagnosis, and prognosis are essential tasks in the operation of autonomous spacecraft, instruments, and in situ platforms. One of NASA s key mission requirements is robust state estimation. Sensing, using a wide range of sensors and sensor fusion approaches, plays a central role in robust state estimation, and there is a need to diagnose sensor failure as well as component failure. Sensor validation can be considered to be part of the larger effort of improving reliability and safety. The standard methods for solving the sensor validation problem are based on probabilistic analysis of the system, from which the method based on Bayesian networks is most popular. Therefore, these methods can only predict the most probable faulty sensors, which are subject to the initial probabilities defined for the failures. The method developed in this work is based on a model-based approach and provides the faulty sensors (if any), which can be logically inferred from the model of the system and the sensor readings (observations). The method is also more suitable for the systems when it is hard, or even impossible, to find the probability functions of the system. The method starts by a new mathematical description of the problem and develops a very efficient and systematic algorithm for its solution. The method builds on the concepts of analytical redundant relations (ARRs).

Vatan, Farrokh↗