Search NASA⌕ Search

SEARCH · Search NASA

Results for “Opacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A calculation of the Rosseland mean opacity of dust grains in primordial solar system nebulae

The Rosseland mean opacity owing to grains was calculated as a function of temperature and density for nebulae having solar elemental abundances. The values of the mean opacity were evaluated with a generalized formulation allowing for anisotropic scattering. The values of the mean opacity do not depend sensitively on the choice of the particle size distribution function, provided that there are few particles having sizes in excess of several tens of microns. The results indicate that thermal convection in primordial nebulae occurs over broader ranges of altitudes at low temperatures than at high temperatures, and for size distributions for which extensive aggregation has not yet occurred.

Pollack, J. B.↗

Protostellar formation in rotating interstellar clouds. VII - Opacity and fragmentation

This paper investigates the effect of variations in the Rosseland mean opacity of dust grains on numerical models of three-dimensional protostellar collapse and fragmentation. In particular, it is found that increasing the dust grain opacity by factors of three to four has little effect upon the gross characteristics of protostellar fragmentation. Consequently, theoretical quantities such as the estimated minimum protostellar mass for Population I star formation are insensitive to the precise value of the opacity.

Boss, Alan P.↗

The violet and ultraviolet opacity problem for carbon stars

The paper considers the longstanding problem of the 'violet opacity' in cool carbon stars by testing, through synthetic spectra, many new and previously suggested opacity sources, based on currently available model atmospheres for carbon stars and M giant stars. While several bound-free edges of neutral metals are important opacity sources, those of Na I at at 2413 A, Mg I at 2514 A, and particularly Ca I at 2940 A are especially significant. Collectively, thousands of atomic lines are important, and the enormous line of Mg I at 2852 A influences the spectrum well into the visible. The pseudocontinuum of C3 and the photoionization continuum of CH both play noticeable but secondary roles. Synthetic spectra form the carbon star models with and without polyatomic molecules fit nicely the collected observations of the well-observed carbon star TX Psc.

Johnson, Hollis R.↗

Seismic analysis of the solar interior. I - Can opacity changes improve the theoretical frequencies?

The paper describes the application of seismic inverse theory to the deduction of properties of the solar interior using presently available measured frequencies of the solar oscillations. Only the solar opacity is included in this application. This study has used the spectral expansion method of Lanczos and Jackson to derive changes to the opacity which improve agreement between the theoretical and observed frequencies of oscillation. It is found that a family of opacity changes exists which yields models that improve the frequency agreement by amounts that are indistinguishable among the family members.

Korzennik, Sylvain G.↗

Continuum opacity produced by spectral lines in supernovae and similar expansions

Within rapidly expanding objects such as supernovae, the large velocity gradient Doppler spreads the spectral lines to such an extent that even relatively weak transitions affect the propagation of radiation. It is shown that under appropriate conditions (involving the separation between lines and the velocity gradient), the effects of many lines within a small frequency interval produce a contribution to the transfer equation which acts like an ordinary continuum opacity. This expansion opacity is a surprisingly simple function of the Sobolev optical depth of the lines. The dependence of this opacity on frequency, temperature, density, velocity gradient (1/time), and heavy element abundance is evaluated.

Wagoner, Robert V.↗

Iron and molecular opacities and the evolution of Population I stars

Effects of recent opacity revisions on the evolution of Population I stars are explored over the range 1.5-60 solar masses. Opacity parameters considered include the angular momentum coupling scheme for iron, the relative iron abundance, the total metal abundance, and diatomic and triatomic molecular sources. Only the total metal abundance exerts an important control over the evolutionary tracks. Blue loops on the H-R diagram during core helium burning can be very sensitive to opacity, but only insofar as the simple formation or suppression of a blue loop is concerned. The blue loops are most robust for stellar masses around 10 solar masses. We confirm, from a comparison of stellar models with observational data, that the total metal abundance is close to solar and that convective core overshooting is likely to be very slight. The new models predict the existence of an iron convection zone in the envelope and a great widening of the main-sequence band in the H-R diagram at luminosities brighter than 100,000 solar luminosities.

Stothers, Richard B.↗

Opacity, metallicity, and Cepheid period ratios in the galaxy and Magellanic Clouds

Linear pulsation calculations are employed to reproduce the bump Cepheid resonance (P(sub 2)/P(sub 0) = 0.5 at P(sub 0) approximately equal to 10 days) and to model, individually, the P(sub 1)/P(sub 0) period ratios for the dozen known Galactic beat Cepheids. Convection is ignored. The results point to a range of metallicity among the Cepheids, perhaps as large as 0.01 approximately less than Z approximately less than 0.02, with no evidence for any star exceeding Z = 0.02. We find masses and luminosities which range from M approximately less than 4 solar mass, log(base 10) approximately less than 3.0 at P(sub 0) approximately equal to 3 days to M approximately less than 6 solar mass, log(base 10) L approximately greater than 3.5 at P(sub 0) approximately equal to 10 days. Similar parameters are indicated for the P(sub 0) approximately equal to 10 days Cepheids in the LMC and SMC, provided that the resonance for these stars occurs at a slightly longer period, P(sub 0) days, as has been suggested in the literature. Our calculations were performed mainly using OPAL opacities, but also with new opacities from the Opacity project (OP). Only small differences were found between the OPAL results and those from OP. Finally, some suggestions are made for possible future work, including evolution and pulsation calculations, and more precise observations of Cepheids in the Magellanic Clouds.

Simon, Norman R.↗

Research on Spectroscopy, Opacity, and Atmospheres

A web site has been set up to make the calculations accessible; (i.e., cfakus.harvard.edu) This data can also be accessed by FTP. It has all of the atomic and diatomic molecular data, tables of distribution function opacities, grids of model atmospheres, colors, fluxes, etc, programs that are ready for distribution, and most of recent papers developed during this grant. Atlases and computed spectra will be added as they are completed. New atomic and molecular calculations will be added as they are completed. The atomic programs that had been running on a Cray at the San Diego Supercomputer Center can now run on the Vaxes and Alpha. The work started with Ni and Co because there were new laboratory analyses that included isotopic and hyperfine splitting. Those calculations are described in the appended abstract for the 6th Atomic Spectroscopy and oscillator Strengths meeting in Victoria last summer. A surprising finding is that quadrupole transitions have been grossly in error because mixing with higher levels has not been included. All levels up through n=9 for Fe I and II, the spectra for which the most information is available, are now included. After Fe I and Fe II, all other spectra are "easy". ATLAS12, the opacity sampling program for computing models with arbitrary abundances, has been put on the web server. A new distribution function opacity program for workstations that replaces the one used on the Cray at the San Diego Supercomputer Center has been written. Each set of abundances would take 100 Cray hours costing $100,000.

Kurucz, Robert L.↗

Mars Global Surveyor Thermal Emission Spectrometer (TES) Observations of Dust Opacity During Aerobraking and Science Phasing

The Mars Global Surveyor (MGS) arrived at Mars in September 1997 near Mars southern spring equinox and has now provided monitoring of conditions in the Mars atmosphere for more than half a Mars year. The large majority of the spectra taken by the Thermal Emission Spectrometer (TES) are in a nadir geometry (downward looking mode) where Mars is observed through the atmosphere. Most of these contain the distinct spectral signature of atmospheric dust. For these nadir-geometry spectra we retrieve column-integrated infrared aerosol (dust) opacities. TES observations during the aerobraking and science-phasing portions of the MGS mission cover the seasonal range L(sub s)=184 deg - 28 deg. Excellent spatial coverage was obtained in the southern hemisphere. Northern hemisphere coverage is generally limited to narrow strips taken during the periapsis pass but is still very valuable. At the beginning of the mission the 9-(micron)meter dust opacity at midsouthern latitudes was low (0.15-0.25). As the season advanced through southern spring and into summer, TES observed several regional dust storms (including the Noachis dust storm of November 1997) where peak 9-(micron)meter dust opacities approached or exceeded unity, as well as numerous smaller local storms. Both large and small dust storms exhibited significant changes in both spatial coverage and intensity over a timescale of a day. Throughout southern spring and summer the region at the edge of the retreating southern seasonal polar ice cap was observed to be consistently more dusty than other latitudes.

Smith, Michael D.↗

Fractal Particles: Titan's Thermal Structure and IR Opacity

Titan's haze particles are the principle opacity at solar wavelengths. Most past work in modeling these particles has assumed spherical particles. However, observational evidence strongly favors fractal shapes for the haze particles. We consider the implications of fractal particles for the thermal structure and near infrared opacity of Titan's atmosphere. We find that assuming fractal particles with the optical properties based on laboratory tholin material and with a production rate that allows for a match to the geometric albedo results in warmer troposphere and surface temperatures compared to spherical particles. In the near infrared (1-3 microns) the predicted opacity of the fractal particles is up to a factor of two less than for spherical particles. This has implications for the ability of Cassini to image Titan's surface at 1 micron.

McKay, C. P.↗

An Empirical Determination of the Intergalactic Background Light Using Near-Infrared Deep Galaxy Survey Data Out to 5 Micrometers and the Gamma-Ray Opacity of the Universe

We extend our previous model-independent determination of the intergalactic background light, based purely on galaxy survey data, out to a wavelength of 5 micrometers. Our approach enables us to constrain the range of photon densities, based on the uncertainties from observationally determined luminosity densities and colors. We further determine a 68% confidence upper and lower limit on the opacity of the universe to gamma-rays up to energies of 1.6/(1 + z) terraelectron volts. A comparison of our lower limit redshift-dependent opacity curves to the opacity limits derived from the results of both ground-based air Cerenkov telescope and Fermi-LAT observations of PKS 1424+240 allows us to place a new upper limit on the redshift of this source, independent of IBL modeling.

BL Lacertae↗

Two-photon ionization in solar opacity experiments

The discrepancies between theoretical and experimental opacities reported by experiments performed at the Sandia National Laboratory Z-pinch relevant to the solar interior remain unexplained. The suggestion that two-photon ionization could help resolve the discrepancies was recently examined and found not to account for the higher than predicted measured opacities. That test, however, was limited in scope and is now extended to include excited configurations and different charge states of several elements. Comparisons of one- and two-photon ionization cross-sections show that the latter fail to resolve the aforementioned discrepancies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design and Fabrication of Opacity Targets for the National Ignition Facility

Accurate models for opacity of partially ionized atoms are important for modeling and understanding stellar interiors and other high-energy-density phenomena such as inertial confinement fusion. Lawrence Livermore National Laboratory is leading a multilaboratory effort to conduct experiments on the National Ignition Facility (NIF) to try to reproduce recent opacity tests at the Sandia National Laboratory Z-facility. Since 2015, the NIF effort has evolved several hohlraum designs that consist of multiple pieces joined together. The target also has three components attached to the main stalk over a long distance with high tolerances that have resulted in several design iterations. The target has made use of rapid prototyped features to attach a capsule and collimator under the hohlraum while avoiding interference with the beams. Here, this paper discusses the evolution of the hohlraum and overall target design and the challenges involved with fabricating and assembling these targets.

47 OTHER INSTRUMENTATION↗

Luminous Blue Variable Outbursts from the Variations of Helium Opacity

Luminous blue variables are evolved massive stars that exhibit poorly understood variability on timescales from months to years with significant mass loss rates. They typically reach an effective temperature of ≈ 9000K during outbursts. These variations and large mass loss rates are believed to be caused by the radiation force on the cooler, more opaque outer layers that can balance or even exceed the force of gravity, although the exact mechanisms for the outburst and variability are unknown and cannot be calculated in one dimension. Here we report three dimensional simulations of radiation-dominated massive stars, which show that helium opacity plays an important role for the outburst and setting the observed effective temperature ≈ 9000K. It also likely triggers the episodic mass loss at rates of 10(exp -7) – 10(exp -5)M(sub ⨀)/yr. The helium opacity peak only shows up in our three-dimensional simulations but not in one dimensional calculation because the envelope structures need to be determined self-consistently with convection. The simulations not only reproduce similar observed long time scale variabilities, but also predict that convection causes irregular envelope oscillations and 10-30% brightness variations on a typical timescale of a few days and reaches larger amplitudes for even cooler stars. These short time scale variabilities should be observed with future high cadence observations.

Helium opacities↗

Free-free opacity in dense plasmas with an average atom model

A model for the free-free opacity of dense plasmas is presented. The model uses a previously developed average atom model, together with the Kubo-Greenwood model for optical conductivity. This, in turn, is used to calculate the opacity with the Kramers-Kronig dispersion relations. Furthermore, comparisons to other methods for dense deuterium results in excellent agreement with DFT-MD simulations, and reasonable agreement with a simple Yukawa screening model corrected to satisfy the conductivity sum rule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostic development in precise opacity measurement of radiatively heated Al plasma on Shenguang II laser facility

Simultaneous measurements of the self-emission spectrum, the backlighting source spectrum, and the transmission spectrum in one shot, which reduce the experimental uncertainties from shot-to-shot fluctuation, are essential for precise opacity experiments. In order to achieve precise absorption spectrum of Al plasmas, a special half sample sandwich target was designed and short backlighter was used to provide time- and space-resolving diagnostics on the Shenguang II high power laser facility. In the measurement, a cylindrical cavity with CH foam baffles was used to provide a clean x-ray radiation environment for sample heating. The x-ray source spectrum, the transmission spectrum, and the self-emission spectrum of the soft x-ray heated Al sample were recorded in one shot with a penta-erythritol tetrakis (hydroxymethy) methane C(CH{sub 2}OH){sub 4} (PET) crystal spectrometer by using the point-projection method. Experimental results have been compared with the calculation results of a detailed level accounting opacity code.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental Investigation of Iron Plasma Opacity Models

Recent experiments extended iron opacity model tests to temperatures above 150 eV for the first time. The experiments use the Z Facility to volumetrically heat a CH-tamped Fe/Mg plasma using x-rays. The frequency dependent sample transmission is measured by viewing a backlight through the sample. The plasma conditions are inferred from the Mg K-shell absorption. The strategy for this research is to examine the underlying physics within Fe opacity models by comparisons with the measured transmission. Physics topics of interest include charge state distribution, energy level structure, and line broadening. In this talk we discuss methods to exploit the data and advance understanding for these topics. In addition, we review new experiments under way to further improve the data and to achieve higher energy density conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A requirement for diagnosis of the ionization state in opacity measurements

An accurate independent diagnosis of the temperature and the ionization state of the sample plasmas is important to get a set of well-characterized opacity data in experiment. An analysis of using x-ray scattering was presented for this purpose. Information of the ionization state of the sample plasmas could only be clearly detected when both the Compton and Rayleigh features of the scattering spectra are detectable in one laser shot. Only those plasmas with a few bounded electrons left can provide such kind of scattering spectra. The requirements for using the x-ray scattering as diagnosis are rigorous. Under a radiation field produced by laser-heated hohlraum, only limited number of sample elements can be heated to the ionization state required. Careful design is needed to achieve an x-ray scattering experiment. This work can be helpful to establish a diagnostic flattop for the opacity experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗