SEARCH · Search NASA

Results for “Optoelectronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Au 76 (SC 6 H 4 - p -CH 3 ) 42 Square Quantum Platelet: One-Dimensional Growth of Quantum Rods Turns 90 Degrees

The growth pattern of atomically precise nanoclusters (NCs) is of fundamental interest, and the structural effect on their photoluminescence (PL) is important owing to their PL in the second near-infrared (NIR-II) range (900–1700 nm optoelectronically or 1000–1700 nm biologically) that holds great promise for optoelectronic and biomedical applications. Because of the small energy gaps required for NIR-II emission, the PL performance of NIR-II luminophores is largely limited by nonradiative processes. In this work, we discovered a Au 76 (p-MBT) 42 (Au 76 ) (p-MBTH = p-methylbenzenethiol) nanocluster featuring a face-centered cubic (fcc) core in a square shape (edge length: 1 nm). This square quantum platelet can be viewed as a side-facet (010) growth of the Au 52 (p-MBT) 32 (Au 52 ) rod, as opposed to the (001) facet growth. We found that Au 76 exhibits bright emission centered at 970 nm with a PL quantum yield (PLQY) of 30% in solution under ambient conditions, which can be further enhanced to 40% when the solution is deaerated. X-ray crystallography analysis coupled with time-resolved spectroscopy revealed that the nearly doubled PLQY compared to Au 52 (18.3%) was resulted from shorter Au–Au bond lengths in Au 76 (average 2.835 Å) than that in Au 52 (3.04 Å). This work provides important insights into the design of highly luminescent NCs, which are promising for photovoltaics, photocatalysis, and optoelectronic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Influence of shape on crystal structure and optical properties of heterocyclic conjugated molecules

Organic optoelectronics are increasingly important due to their tunablilty, flexibility, and solution processability. Tuning optical properties of these materials as solids relies on the balance of weak non-covalent interactions that dictate crystal structure, but are difficult to predict. Our research aims to improve our understanding of how electrostatic interactions can direct and facilitate intramolecular interactions that dictate emergent properties of crystalline materials. This paper focuses on exploring how multi-fused thiophene ring systems that are popular in modern organic optoelectronic materials impact intramolecular interactions, while also investigating the role of molecular shape. In these examples, the shape of heterocyclic systems correlate with the crystal structures: while the bent heterocyclics show no discrete and discernable intramolecular interactions, those with bent shapes interact cofacially with one of the electron poor ArF pendants by twisting the arylene ethynylene backbone. Two of the control molecules, which bear non-fluorinated benzyl ester substituents, show intramolecular edge-face interactions, and several of these molecules show clear polymorphic behavior. Furthermore, these findings further our understanding of how discrete interactions can be altered not only by electrostatics, but also by shape, allowing for increasingly nuanced control over the crystal structures and optical properties of optoelectronic materials.

Guzmán, Elisa↗

DOE OSTI2025

Polytype selection in the antisolvent-free crystallization of formamidinium lead iodide using alkylammonium chlorides

This work presents a systematic study of how the size of the C 0 –C 4 alkylammonium chloride additive directs the crystallization pathway in antisolvent-free FAPbI 3 films. We find that larger cations promote the intermediate formation of hexagonal polytypes, correlating with enhanced film crystallinity. Understanding the nucleation, crystallization, and phase transition mechanisms in perovskite thin films produced without antisolvent quenching is crucial for improving phase stability and optoelectronic performance at scale. By means of in situ grazing incidence wide-angle X-ray scattering experiments, we show that the nature of alkylammonium chloride (RACl) additives significantly influences the crystallization dynamics and temperature-dependent stability of formamidinium lead iodide (FAPbI 3 ) perovskite films formed using antisolvent-free processes. The in situ experiments reveal that the effective radius of the RA + cation and the vapor pressure of the RA 0 conjugate base are critical factors affecting the crystallization pathway and film morphology. C 2 –C 3 additives with moderate chain lengths may strike a balance between promoting the early crystallization of the cubic 3C phase while suppressing unwanted phases. This balance promotes the formation of highly crystalline cubic perovskite phase with well-oriented structure and better optoelectronic properties. These findings provide guidance regarding the design of additives to crystallize more stable and efficient perovskite films for optoelectronic applications.

Marchezi, Paulo E↗

DOE OSTI2025

Multimodal hard X-ray nanoprobe techniques for operando investigations of photovoltaic devices

Compared with conventional laboratory-scale X-ray techniques, synchrotron based X-rays with higher brilliance and higher coherence allow for the investigation of various material properties with high spatial resolution. The microscopic behaviours of materials can be examined using the Hard X-ray Nanoprobe beamline (I14) at Diamond Light Source, which provides a 50 nm focused beam and has been successfully employed to identify nanoscale optoelectronic features in energy-harvesting materials such as halide perovskites that exhibit local heterogeneity. We have developed X-ray beam-induced current (XBIC) measurement capability at I14 to address the growing demand for operando analysis in energy-harvesting research. Here, we demonstrate that X-ray fluorescence (XRF)/XBIC multimodal measurements are feasible at I14 and apply these newly implemented techniques to study perovskite solar cells with various additive concentrations to understand the effect of the additive on nanoscale optoelectronic performance. This expanded operando characterization capability offers the possibility of monitoring nanometre-scale compositional variations and corresponding optoelectronic features of actual solar cell configurations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1991

Photonics

Optoelectronic materials and devices are examined. Optoelectronic devices, which generate, detect, modulate, or switch electromagnetic radiation are being developed for a variety of space applications. The program includes spatial light modulators, solid state lasers, optoelectronic integrated circuits, nonlinear optical materials and devices, fiber optics, and optical networking photovoltaic technology and optical processing.

Source record↗

NASA NTRS2007

Wafer bonded virtual substrate and method for forming the same

A method of forming a virtual substrate comprised of an optoelectronic device substrate and handle substrate comprises the steps of initiating bonding of the device substrate to the handle substrate, improving or increasing the mechanical strength of the device and handle substrates, and thinning the device substrate to leave a single-crystal film on the virtual substrate such as by exfoliation of a device film from the device substrate. The handle substrate is typically Si or other inexpensive common substrate material, while the optoelectronic device substrate is formed of more expensive and specialized electro-optic material. Using the methodology of the invention a wide variety of thin film electro-optic materials of high quality can be bonded to inexpensive substrates which serve as the mechanical support for an optoelectronic device layer fabricated in the thin film electro-optic material.

Atwater, Jr., Harry A.↗

NASA NTRS2008

Wafer bonded epitaxial templates for silicon heterostructures

A heterostructure device layer is epitaxially grown on a virtual substrate, such as an InP/InGaAs/InP double heterostructure. A device substrate and a handle substrate form the virtual substrate. The device substrate is bonded to the handle substrate and is composed of a material suitable for fabrication of optoelectronic devices. The handle substrate is composed of a material suitable for providing mechanical support. The mechanical strength of the device and handle substrates is improved and the device substrate is thinned to leave a single-crystal film on the virtual substrate such as by exfoliation of a device film from the device substrate. An upper portion of the device film exfoliated from the device substrate is removed to provide a smoother and less defect prone surface for an optoelectronic device. A heterostructure is epitaxially grown on the smoothed surface in which an optoelectronic device may be fabricated.

Atwater, Harry A., Jr.↗

DOE OSTI2024

Spatially Precise Light‐Activated Dedoping in Wafer‐Scale MoS 2 Films

2D materials, particularly transition metal dichalcogenides (TMDCs), have shown great potential for microelectronics and optoelectronics. However, a major challenge in commercializing these materials is the inability to control their doping at a wafer scale with high spatial fidelity. Interface chemistry is used with the underlying substrate oxide and concomitant exposure to visible light in ambient conditions for photo-dedoping wafer scale MoS 2 . It is hypothesized that the oxide layer traps photoexcited holes, leaving behind long-lived electrons that become available for surface reactions with ambient air at sulfur vacancies (defect sites) resulting in dedoping. Additionally, high fidelity spatial control is showcased over the dedoping process, by laser writing, and fine control achieved over the degree of doping by modulating the illumination time and power density. This localized change in MoS 2 doping density is very stable (at least 7 days) and robust to processing conditions like high temperature and vacuum. The scalability and ease of implementation of this approach can address one of the major issues preventing the “Lab to Fab” transition of 2D materials and facilitate its seamless integration for commercial applications in multi-logic devices, inverters, and other optoelectronic devices.

14 SOLAR ENERGY↗

DOE OSTI2025

Impact of Arsenic- and Indium-Terminated InGaAs Stressors on Carrier Confinement, Strain, Defects, and Transport Properties of Tensile-Strained Ge

Device-quality tensile-strained Ge (ε-Ge) grown on a large bandgap semiconductor with superior electrical and optical carrier confinement is essential for group-IV-based optoelectronics. Properties of ε-Ge active layers synthesized on In 0.24 Ga 0.76 As buffers with two different surface terminations─arsenic-rich and indium-rich─were experimentally demonstrated, highlighting the factors not considered in theoretical calculations. High-resolution X-ray diffraction and Raman spectroscopy analyses of these ε-Ge/In 0.24 Ga 0.76 As heterostructures confirmed the fully strained (1.6%) and partially relaxed (0.82%) nature of the ε-Ge bonded with arsenic-terminated (Ge As-terminated ) and indium-terminated (Ge In-terminated ) In 0.24 Ga 0.76 As stressors, respectively. High-resolution cross-sectional transmission electron microscopy showed a coherent, sharp, and fully strained ε-Ge/In 0.24 Ga 0.76 As heterointerface in the Ge As-terminated heterostructure, whereas microtwin defects were present in the Ge In-terminated heterostructure. These heterostructures were further characterized by evaluating the minority carrier lifetimes, high for Ge As-terminated (525 ns) and low for Ge In-terminated (69 ns), using the photoconductive decay technique. Moreover, band alignment was constructed using X-ray photoelectron spectroscopy, where the Ge As-terminated heterostructure revealed that both holes and electrons were confined within the ε-Ge active layer as a type-I band alignment with ΔE V, As-terminated = 0.22 eV and ΔE C,As-terminated = 0.38 eV. On the other hand, the Ge In-terminated heterostructure exhibited a type-II band alignment with ΔE V,In-terminated = – 0.02 eV and ΔE C,In-terminated = 0.53 eV. Furthermore, the magnetotransport properties revealed high mobility (321 cm 2 /(V s)) with single-electron transport in Ge As-terminated heterostructure and low mobility (3.34 cm 2 /(V s)) with multihole transport in the Ge In-terminated heterostructure. Therefore, preferring the ε-Ge on the arsenic-rich surface of In 0.24 Ga 0.76 As stressor over the indium-rich surface during material synthesis offers device-quality materials with high carrier lifetime and superior carrier confinement, which can provide an opportunity to fabricate efficient group-IV-based optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Ferroelastic Domain-Induced Electronic Modulation in Halide Perovskites

Lead halide perovskites have emerged as promising materials for optoelectronic applications due to their exceptional properties. In the all-inorganic CsPbBr 3 perovskites, ferroelastic domains formed during phase transitions enhance bulk transport and emissive efficiency. However, the microscopic mechanisms governing carrier dynamics remain poorly understood. In this study, we employ cathodoluminescence (CL) and micro-Raman spectroscopy to image and investigate the electronic properties of the ferroelastic domain walls in CsPbBr 3 single crystals. CL measurements reveal a reduced emissive yield and a slight redshift in emission at the domain walls. Further, micro-Raman studies provide spatially resolved mapping of vibrational modes, exhibiting second-order phonon modes localized at the domain boundaries. In conclusion, our findings suggest that electron–phonon coupling at the twin domain walls plays a critical role in facilitating efficient charge separation, thereby improving the optoelectronic performance of the CsPbBr 3 perovskites.

Carrier dynamics↗

DOE OSTI2025

Review of radiation-induced defects in GaAs

Radiation-resilient optoelectronic materials are highly desired in space and nuclear applications, and understanding the relevant defects and electronic processes in those materials is crucial for both current and next-generation applications. GaAs is a prototypical semiconductor that serves as a foundational system for describing and understanding optoelectronic devices. In this review, both experimental studies and molecular dynamics (MD) simulations of irradiated GaAs are reviewed, with particular emphasis on the deep-level transient spectroscopy, irradiation-induced amorphization zones, and MD predictions of damage structures. The MD results are also compared to predictions of the non-ionized energy-loss model. Recent theoretical studies, in particular, density functional theory based calculations on the simple intrinsic defects and defect clusters in GaAs, are also reviewed. These defects have an important role in dictating the evolution of GaAs in radiation damage environments, as they impact the coupled dynamics of charge carriers. Finally, possible gaps and challenges toward the general understanding of defect evolution in GaAs are discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Possible Realization of Hyperbolic Plasmons in Few-Layered Rhenium Disulfide

Hyperbolic plasmons are a highly desired property in optoelectronics and biomolecular sensing. The necessary condition to realize hyperbolic plasmons is a significant anisotropy of the principal components of the dielectric function, such that at a certain frequency range, one component is negative and the other is positive, i.e., one component is metallic, and the other one is dielectric. Here, we study the effect of anisotropy in ReS 2 , and our theory shows that ReS 2 can host hyperbolic plasmons in the ultraviolet frequency range. The operating frequency range of the hyperbolic plasmons can be tuned with the number of ReS 2 layers. However, we note that the significantly large imaginary part of the macroscopic dielectric response in all layered variants of ReS 2 can result in substantial losses for the hyperbolic plasmons, as in the case with other known hyperbolic materials, with the exception of MoOCl 2 . We also note that ReS 2 hosts ultraviolet hyperbolic plasmons while ZrSiSe, WTe 2 , and CuS nanocrystals host infrared plasmons, providing a novel platform for optoelectronics in the ultraviolet range.

36 MATERIALS SCIENCE↗

NASA NTRS2017

Compendium of Current Total Ionizing Dose and Displacement Damage Results from NASA Goddard Space Flight Center and NASA Electronic Parts and Packaging Program

Total ionizing dose and displacement damage testing was performed to characterize and determine the suitability of candidate electronics for NASA space utilization. Devices tested include optoelectronics, digital, analog, linear bipolar devices, and hybrid devices. Displacement Damage, Optoelectronics, Proton Damage, Single Event Effects, and Total Ionizing Dose.

Proton Damage↗

DOE OSTI2024

Ligand‐Mediated Quantum Yield Enhancement in 1‐D Silver Organothiolate Metal–Organic Chalcogenolates

X-ray free electron laser (XFEL) microcrystallography and synchrotron single-crystal crystallography are used to evaluate the role of organic substituent position on the optoelectronic properties of metal–organic chalcogenolates (MOChas). MOChas are crystalline 1D and 2D semiconducting hybrid materials that have varying optoelectronic properties depending on composition, topology, and structure. While MOChas have attracted much interest, small crystal sizes impede routine crystal structure determination. A series of constitutional isomers where the aryl thiol is functionalized by either methoxy or methyl ester are solved by small molecule serial femtosecond X-ray crystallography (smSFX) and single crystal rotational crystallography. While all the methoxy examples have a low quantum yield (0-1%), the methyl ester in the ortho position yields a high quantum yield of 22%. Here, the proximity of the oxygen atoms to the silver inorganic core correlates to a considerable enhancement of quantum yield. Four crystal structures are solved at a resolution range of 0.8–1.0 Å revealing a collapse of the 2D topology for functional groups in the 2- and 3- positions, resulting in needle-like crystals. Further analysis using density functional theory (DFT) and many-body perturbation theory (MBPT) enables the exploration of complex excitonic phenomena within easily prepared material systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Probing the Nanoscale Excitonic Landscape and Confinement of Excitons in Gated Monolayer Semiconductors

Engineering and probing excitonic properties at the nanoscale remains a central challenge in quantum photonics and optoelectronics. While exciton confinement via electrical control and strain engineering has been demonstrated in 2D semiconductors, substantial nanoscale heterogeneity limits the scalability of 2D quantum photonic device architectures. Here, in this work, we use cathodoluminescence spectroscopy to probe the excitonic landscape of monolayer WS 2 under electrostatic gating. Exploiting the high spatial resolution of the converged electron beam, we resolve a homojunction arising between gated and ungated regions. Moreover, we reveal an exciton confinement channel arising from an unconventional doping mechanism driven by the interplay between the electron beam and the applied gate fields. These findings offer new insights into the optoelectronic behavior of monolayer semiconductors under the combined influence of electron-beam excitation and electrostatic gating. Our approach provides a pathway for exciton manipulation at the nanoscale and opens opportunities for controlling quantum-confined exciton transport in 2D materials.

2D materials↗

DOE OSTI2024

Exciton Transport in Perovskite Materials

Halide perovskites have emerged as promising materials for a wide variety of optoelectronic applications, including solar cells, light‐emitting devices, photodetectors, and quantum information applications. In addition to their desirable optical and electronic properties, halide perovskites provide tremendous synthetic flexibility through variation of not only their chemical composition but also their structure and morphology. At the heart of their use in optoelectronic technologies is the interaction of light with electronic excitations in the form of excitons. This review discusses the properties and behavior of excitons in halide perovskite materials, with a particular emphasis on low‐dimensional perovskites and the effects of nanoscale morphology on excitonic behavior. The basic theory of excitonic energy migration in semiconductor nanomaterials is introduced, and novel observations in halide perovskite nanomaterials that have evolved our current understanding are explored. Lastly, many important questions that remain unanswered are presented and exciting emerging directions in low‐dimensional perovskite exciton physics are discussed.

2D materials↗

DOE OSTI2025

Large‐Scale 2D Perovskite Nanocrystals Photodetector Array via Ultrasonic Spray Synthesis

Abstract 2D perovskite (PVSK) single crystals have received significant attention due to their unique optical and optoelectronic properties. However, current synthesis methods face limitations, particularly in large‐area fabrication, which remain critical barriers to practical applications. In this study, the synthesis of red/green/purple‐blue‐colored 2D PVSK nanocrystals over a large area (4‐inch wafer) and the fabrication of high‐performance photodetector arrays are presented via a facile yet efficient spray‐coating approach with a liquid‐bridge transport effect. The photodetector array achieves 100% working yield, high photo‐responsivity (1.5 × 10 6 A W −1 ) and specific‐detectivity (1.1 × 10 16 Jones) with competitive photomapping characteristics. An intelligent vision system for automatic shape recognition is further demonstrated with a recognition rate exceeding 90%. This study provides significant advances in the scalable synthesis of nanoscale 2D PVSK crystals, their integration into large‐area optoelectronic devices, and their potential use in artificial‐intelligence systems.

Lee, Yoon Ho [Davidson School of Chemical Engineer↗

DOE OSTI2025

Impact of Halogen Groups on the Properties of PEA–Based 2D Pb–Sn Halide Perovskites

Tuning broad emission in 2D Pb–Sn halide perovskites (HPs) is essential for advancing optoelectronic applications, particularly for color-tunable and white-light-emitting devices. This broad emission is linked to structural factors, such as defects and phase segregation of the Pb component within the Pb–Sn system, which are strongly influenced by the molecular structure and chemical properties of spacer cations. Atomic tuning of the spacers via halogenation opens up a new way to fine-tune the molecular properties, enabling further augmentations of HP functionalities. Nevertheless, the distinct broad emission's sensitivity to spacer chemistry remains underexplored. Here, halogenation's influence is systematically investigated on 2D HP emission characteristics using a high-throughput workflow. These findings reveal that the F-containing phenethylammonium (4F-PEA) spacer narrows the broadband PL, whereas Cl broadens it. Through a correlative study, it is found that 4F-PEA reduces not only the local phase segregation but also the defect levels and microstrains in 2D HPs. This is likely attributed to the manifestation of less lattice distortion via stronger surface coordination of the dipole-augmented 4F-PEA. Furthermore, these results highlight halogenation as a key factor in modulating phase segregation and defect density in 2D Pb–Sn HPs, offering a promising pathway to tune the emission for enhanced optoelectronic performance.

2D Pb-Sn halide perovskites↗