Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optoelectronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Field Effect Optoelectronic Modulation of Quantum-Confined Carriers in Black Phosphorus

We report measurements of the infrared optical response of thin black phosphorus under field-effect modulation. Here, we interpret the observed spectral changes as a combination of an ambipolar Burstein-Moss (BM) shift of the absorption edge due to band-filling under gate control, and a quantum confined Franz-Keldysh (QCFK) effect, phenomena that have been proposed theoretically to occur for black phosphorus under an applied electric field. Distinct optical responses are observed depending on the flake thickness and starting carrier concentration. Transmission extinction modulation amplitudes of more than two percent are observed, suggesting the potential for use of black phosphorus as an active material in mid-infrared optoelectronic modulator applications.

36 MATERIALS SCIENCE↗

Cofacial Versus Coplanar Arrangement in Centrosymmetric Packing Dimers of Dipolar Small Molecules: Structural Effects on the Crystallization Behaviors and Optoelectronic Characteristics

Two D-π–A-A molecules ( MIDTP and TIDTP ) composed of an electron-rich ditolylamino group (D) and an electron-deficient 5-dicyanovinylenylpyrimidine (A-A) fragment bridged together with indeno[1,2- b ]thiophene (IDT) were synthesized. These molecules provide an opportunity to examine in-depth the impact of side-chain variations (methyl vs p -tolyl) on the crystallization behaviors, solid-state morphology, physical properties, and optoelectronic characteristics relevant for practical applications. X-ray analyses on single-crystal structures indicate that methyl-substituted MIDTP forms “coplanar antiparallel dimers” via C–H···S interactions and organizes into an ordered slip-staircase arrays. In contrast, p -tolyl-bearing TIDTP shows “cofacial centrosymmetric dimers” via π–π interactions and packs into a less-ordered layered structures. The X-ray diffraction analyses upon thermal treatment are consistent with a superior crystallinity of MIDTP , as compared to that of TIDTP . This difference indicates a greater propensity to organization by introduction of the smaller methyl group versus the bulkier p -tolyl group. The increased propensity for order by MIDTP facilitates the crystallization of MIDTP in both solution-processed and vacuum-deposited thin films. MIDTP forms solution-processed single-crystal arrays that deliver OFET hole mobility of 6.56 × 10 –4 cm 2 V –1 s –1 , whereas TIDTP only forms amorhpous films that gave lower hole mobility of 1.34 × 10 –5 cm 2 V –1 s –1 . MIDTP and TIDTP were utilized to serve as donors together with C 70 as acceptor in the fabrication of small-molecule organic solar cells (SMOSCs) with planar heterojunction (PHJ) or planar-mixed heterojunction (PMHJ) device architectures. OPV devices based on higher crystalline MIDTP delivered power conversion efficiencies (PCEs) of 2.5% and 4.3% for PHJ and PMHJ device, respectively, which are higher than those of TIDTP -based cells. Finally, the improved PCEs of MIDTP -based devices are attributed to better hole-transport character.

36 MATERIALS SCIENCE↗

Highly Stable Transparent Conductive Electrodes Based on Silver–Platinum Alloy-walled Hollow Nanowires for Optoelectronic Devices

In industrial manufacturing, alloying can contribute to the passivation of active metals and markedly improve their corrosion resistance. This inspires us to solve the current critical problem of Ag nanowires (Ag NWs) that have poor stability against chemical and electrochemical corrosion. These problems have seriously limited the applications of Ag NWs in optoelectronic devices where they are used for transparent conductive electrodes. Here, a kind of transparent conductive electrode based on Ag@Pt alloy-walled hollow nanowires (Ag@Pt AHNWs) is successfully fabricated by introducing 12 mol% Pt into long Ag NWs to form Ag@Pt alloy. The as-synthesized electrodes exhibit better optical transmittance (82% at the wavelengthof 550 nm) under high electrical conductivity (28.73 O/sq), high thermal stability up to 400 oC for 11 h, remarkable mechanical flexibility (remaining stable after 5000 cycles bending), as well as high resistance against chemical and electrochemical corrosion. The Ag@Pt AHNWs electrodes are further applied in primary bifunctional polyaniline electrochemical device, and the device shows promising flexibility, noticeable multicolor performances and the high specific capacitance due to the remarkable mechanical flexibility and electrochemical stability of Ag@Pt AHNWs. This work will provide an optional approach for the preparation of other metal nanomaterials electrode with high stability.

Zhou, Kailin↗

Plasma-Enhanced Atomic Layer Deposition of TiAlN: Compositional and Optoelectronic Tunability

Titanium nitride (TiN) is a unique refractory plasmonic material, the nanocomposites and alloys of which provide further opportunities to tailor its optical and photonic properties. We prepare TiAlN films of continuously variable compositions through the systematic variation of TiN versus AlN cycle ratio in plasma-enhanced atomic layer deposition (PEALD) and investigate the resulting thin-film composition, crystallinity, and optical properties. The resulting properties of TiAIN films are not simple linear combinations of the TiN and AlN films, which exhibit distinct metallic and dielectric properties, but instead are dramatically influenced by the local chemical environment of neighboring constituents. In situ spectroscopic ellipsometry further enables measurement of the varying optical properties of TiAlN films, which evolve over 10 s of nm of film thickness. The tunable optoelectronic properties of TiAlN films enable durable coatings of variable electrical resistance as well as high-temperature diffusion barriers and optical coatings with application to selective solar absorbers and emitters.

36 MATERIALS SCIENCE↗

Photocarrier Dynamics in TlGaS 2 Nanoflakes and van der Waals Heterostructures with Hexagonal Boron Nitride and WS 2 Nanoflakes: Implications for Optoelectronic Applications

We present an experimental investigation on photocarrier dynamics in a TlGaS 2 bulk crystal and its heterostructures with hexagonal BN and WS 2 . The samples were obtained by mechanical exfoliation and dry transfer techniques. The photocarrier dynamics was monitored by a transient absorption technique. We observed a direct optical transition of about 555 nm in the TlGaS 2 crystal. By utilizing transient absorption of that transition, we obtained a hot-carrier energy relaxation time of less than 1 ps and a carrier lifetime of about 300 ps in TlGaS 2 at room temperature. In the hexagonal-BN-TlGaS 2 heterostructure, the photocarrier dynamics was similar to that in TlGaS 2 , indicating the type-I band alignment of this structure with both band extremes located in TlGaS 2 . In the monolayer WS 2 -TlGaS 2 heterostructure, we observed charge transfer from TlGaS 2 to WS 2 and an extended lifetime of the transferred carriers in WS 2 . Here, these results introduce TlGaS 2 as a promising layered material for developing two-dimensional van der Waals materials that can be combined with other two-dimensional materials for various optoelectronic devices.

36 MATERIALS SCIENCE↗

Size- and Phase-Controlled Nanometer-Thick ß-Ga2O3 Films with Green Photoluminescence for Optoelectronic Applications

Realization and optimization of the tunable/enhanced optical properties is critical to further advance the field of optoelectronics, photonics, and nano-electronics. In this context, here, we demonstrate green-emission characteristics with a ~30 fold enhancement in selectively engineered nanocrystalline Ga2O3 with a control over size, phase and interface nanostructure. Pulsed-laser-deposited ß-phase Ga2O3 films with an average crystallite size of ~9 nm along with a highly dense, close-compact nano-columnar structure with lowest possible defect density facilitates the thirty-fold enhancement in the photoluminescence (PL) intensity in green-region. Enhanced PL-emission in the optimized, engineered nano-architecture sheds light in designing Ga2O3-materials for promising future optoelectronic/photocatalytic applications.

Ga2O3, Nanocrystalline Films, Pulsed-Laser Deposit↗

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗

Growth of Nanometer-Thick γ-InSe on Si(111) 7 × 7 by Molecular Beam Epitaxy for Field-Effect Transistors and Optoelectronic Devices

γ-InSe is a semiconductor that holds promising potential in high-performance field-effect transistors and optoelectronic devices. Large-scale, single-phase γ-InSe deposition has proven challenging because of the difficulty in precise control of stoichiometry and the coexistence of different indium selenide phases. In this study, we demonstrate the wafer-scale combinatorial approach to map out the growth window as functions of the Se/In ratio and growth temperature for γ-InSe on the Si(111) 7 × 7 substrate in molecular beam epitaxy. X-ray diffraction (XRD) was used to identify the indium selenide phases, while atomic force microscopy revealed four distinct surface morphologies of γ-InSe, enabling a discussion of the growth mechanisms associated with each morphology. Cross-sectional atomic resolution scanning transmission electron microscopy confirmed that the film was of high crystalline quality and had nearly single-phase γ-InSe. In conclusion, our comprehensive study elucidates the In–Se phase map for thin film growth parameters, providing invaluable landmarks for the reproducible synthesis of high-quality γ-InSe layers.

36 MATERIALS SCIENCE↗

Synthetic Tuning of Exciton–Phonon Coupling in Janus WS 2(1-x) Se 2x Monolayers Revealed by Resonant Raman Excitation Spectroscopy for Optoelectronic Applications

Janus monolayers, such as WSSe, have broken out-of-plane symmetry and an intrinsic dipole moment, impacting exciton transport, lifetime, and phonon interactions while imbuing piezoelectric, photocatalytic, and Rashba spin-splitting properties to transition metal dichalcogenides (TMDs). The new properties of this atomically thin material can be used for optoelectronic device applications. As TMDs are converted into Janus monolayers, e.g., top selenization of WS2 to WSSe, the bandgap and structure smoothly evolve, impacting not only the formation of excitons but also their complex interactions with different phonon modes. Resonant Raman excitation profiles (REPs) are uniquely well-suited to reveal both excitonic transitions and exciton–phonon coupling. Here, the resonant REPs of $A^{'}_{1}$ WS 2 and A 1 WSSe modes are measured to understand the strength of their coupling with the A, B, and C excitonic bands of a WS2 monolayer throughout its stepwise transformation into Janus WSSe by pulsed laser deposition (PLD) of energetic selenium species. In situ Raman spectroscopy during deposition is used to controllably prepare stable intermediate Janus structures, WS 2(1-x) Se 2x (0 ≤ x ≤ 0.5), for ex situ measurement of their resonant REPs. As x increases, REPs reveal not only pronounced excitonic bands that gradually shift toward lower photon energies but also strong, mode-selective exciton–phonon coupling. First-principles resonant Raman simulations independently predict this spectral behavior and are shown capable of matching the spectrally broadened, experimentally observed REP profiles in this model system, indicating their strong predictive capability for future experiments. The combination of controlled synthesis, REP characterization, and predictive theory employed here demonstrates a powerful pathway to understand and ultimately tune exciton–phonon interactions for future quantum optical devices.

Janus monolayers↗

Significantly Enhanced Emission Stability of CsPbBr 3 Nanocrystals via Chemically Induced Fusion Growth for Optoelectronic Devices

Lead–halide perovskite nanocrystals (PNCs) have attracted much attention in recent years due to their outstanding optical properties. We report here a new chemical route for triggering postsynthetic growth of CsPbBr 3 PNCs at room temperature via intentional depletion of stabilizing ligands, resulting in an immediate fusion growth of the as-synthesized PNCs. Upon fusion, the CsPbBr 3 PNCs can grow from ca. 8 nm to ca. 60 nm in lateral dimensions in 48 h, reaching about 14 nm in thickness. More importantly, it was found that the fused PNCs have significantly enhanced optical properties. They showed an exceptionally higher stability to photodegradation. They also displayed sharper emission lines and a higher quantum yield, contrary to the fact that the nanocrystals are much larger. The much-improved optical properties are attributed to the Ruddlesden–Popper (RP) planar faults formed during the fusion process and observed using atomic resolution scanning transmission electron microscopy, which are predicted to result in quantum confinement based on density-functional theory calculations. The newly grown nanocrystals with RP defects are expected to significantly improve light emission properties of the PNCs and find applications in light-emitting diodes and other optoelectronic devices.

36 MATERIALS SCIENCE↗

Technoeconomic Model Suggests Scaling-Up Perovskite Quantum Dots for Optoelectronics Warrants Improved Synthesis Yield, Solvent Recycling, and Automation

A comprehensive technoeconomic cost-analysis of perovskite quantum dot optoelectronics is reported. Using economies-of-scale considerations based on price data from prominent materials suppliers, higher QD synthesis yield, solvent recycling, and synthesis automation are shown to be critical for market-entry of this technology. Combinedly, this three-pronged approach drives quantum dot film fabrication costs down from >$50/m 2 to ~$2-3/m 2 .

14 SOLAR ENERGY↗

Lateral Integration of SnS and GeSe van der Waals Semiconductors: Interface Formation, Electronic Structure, and Nanoscale Optoelectronics

The emergence of atomically thin crystals has allowed extending materials integration to lateral heterostructures where different 2D materials are covalently connected in the plane. The concept of lateral heterostructures can be generalized to thicker layered crystals, provided that a suitably faceted seed crystal presents edges to which a compatible second van der Waals material can be attached layer by layer. Here, we examine the possibility of integrating multilayer crystals of the group IV monochalcogenides SnS and GeSe, which have the same crystal structure, small lattice mismatch, and similar bandgaps. In a two-step growth process, lateral epitaxy of GeSe on the sidewalls of multilayer SnS flakes (obtained by vapor transport of a SnS 2 precursor on graphite) yields heterostructures of laterally stitched crystalline GeSe and SnS without any detectable vertical overgrowth of the SnS seeds and with sharp lateral interfaces. Combined cathodoluminescence spectroscopy and ab initio calculations show the effects of small band offsets on carrier transport and radiative recombination near the interface. Further, the results demonstrate the possibility of forming atomically connected lateral interfaces across many van der Waals layers, which is promising for manipulating optoelectronics, photonics, and for managing charge- and thermal transport.

2D layered crystals↗

Fine-Tuning the Optoelectronic Properties of Freestanding Borophene by Strain

Two-dimensional boron (borophene) is a promising, newly synthesized monolayer metal with promising electronic and optical properties. Borophene has only been recently synthesized on silver substrates, and displays a variety of crystal structures and substrate-induced strains depending on the growth conditions and surface orientation. Here, we present an extensive first-principles study of the structural and optoelectronic properties of the two proposed structures of borophene, β 12 and δ 6 , under strain. With a density functional theory analysis, we determine that the optical absorbance and electronic band structure are continuously tunable upon application of few percent of strain. While both structures remain metallic with moderate strains of up to 6% applied, key features of the band structure, as well as the inplane anisotropy of the complex dielectric function and optical absorption, can be significantly modified.

36 MATERIALS SCIENCE↗

Optoelectronic properties and charge transfer in donor-acceptor all-conjugated diblock copolymers.

All-conjugated block copolymers, which can self-assemble into well-ordered morphologies, provide exciting opportunities to rationally design and control the nanoscale organization of electron-donor and electron-acceptor moieties in optoelectronic active layers. Here we report on the steady-state and time-resolved optical characterization of block copolymer films and solutions containing poly(3-hexylthiophene) as the donor block and poly(9,9-dioctylfluorene) with and without copolymerization with benzothiadiazole as the acceptor block. Transient absorption measurements suggest rapid charge transfer occurs in both systems, with higher efficiency observed in the latter composition. These results indicate that this class of materials has promise in preparing highly ordered bulk heterojunction all-polymer organic photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arene Trifluoromethylation: An Effective Strategy to Obtain Air-Stable n-Type Organic Semiconductors with Tunable Optoelectronic and Electron Transfer Properties

Modulation of organic semiconductor band gap, electron affinities (EA), ionization potentials (IP), and reorganization energies (λ) associated with charge transfer is critical for its applications. We report here that trifluoromethylation not only increases both IP and EA significantly as expected but also narrows the HOMO–LUMO band gaps and increases considerably the air-stability of arene-based n-type organic semiconductors. The increased air-stability results from relatively high EA energies and a change in oxidation mechanism. Calculated EAs and IPs show that trifluoromethylated arenes are excellent candidates for n-type semiconductor materials; though a moderate increase of inner-sphere reorganization energy (λ i ) associated with charge transfer is the penalty for the improved performance of the trifluoromethylated compounds. However, since λ i decreases as the π conjugation increases, a rational design to produce air-stable n-type semiconductor materials with reasonably small λ i is simply to prepare trifluoromethylated arenes with extended π conjugation. Finally, we found that structural isomerization can fine-tune the optoelectronic and electronic transfer properties of the corresponding aromatics.

Environmental Molecular Sciences Laboratory↗

Optoelectronic polymer memristors with dynamic control for power-efficient in-sensor edge computing

Abstract As the demand for edge platforms in artificial intelligence increases, including mobile devices and security applications, the surge in data influx into edge devices often triggers interference and suboptimal decision-making. There is a pressing need for solutions emphasizing low power consumption and cost-effectiveness. In-sensor computing systems employing memristors face challenges in optimizing energy efficiency and streamlining manufacturing due to the necessity for multiple physical processing components. Here, we introduce low-power organic optoelectronic memristors with synergistic optical and mV-level electrical tunable operation for a dynamic “control-on-demand” architecture. Integrating signal sensing, featuring, and processing within the same memristors enables the realization of each in-sensor analogue reservoir computing module, and minimizes circuit integration complexity. The system achieves 97.15% fingerprint recognition accuracy while maintaining a minimal reservoir size and ultra-low energy consumption. Furthermore, we leverage wafer-scale solution techniques and flexible substrates for optimal memristor fabrication. By centralizing core functionalities on the same in-sensor platform, we propose a resilient and adaptable framework for energy-efficient and economical edge computing.

Optics↗

Bismuth and antimony-based oxyhalides and chalcohalides as potential optoelectronic materials

In the last decade the ns 2 cations (e.g., Pb 2+ and Sn 2+ )-based halides have emerged as one of the most exciting new classes of optoelectronic materials, as exemplified by for instance hybrid perovskite solar absorbers. These materials not only exhibit unprecedented performance in some cases, but they also appear to break new ground with their unexpected properties, such as extreme tolerance to defects. However, because of the relatively recent emergence of this class of materials, there remain many yet to be fully explored compounds. Here, we assess a series of bismuth/antimony oxyhalides and chalcohalides using consistent first principles methods to ascertain their properties and obtain trends. Based on these calculations, we identify a subset consisting of three types of compounds that may be promising as solar absorbers, transparent conductors, and radiation detectors. Their electronic structure, connection to the crystal geometry, and impact on band-edge dispersion and carrier effective mass are discussed.

36 MATERIALS SCIENCE↗

Ultrafast vibrational control of organohalide perovskite optoelectronic devices using vibrationally promoted electronic resonance

Vibrational control (VC) of photochemistry through the optical stimulation of structural dynamics is a nascent concept only recently demonstrated for model molecules in solution. Extending VC to state-of-the-art materials may lead to new applications and improved performance for optoelectronic devices. Metal halide perovskites are promising targets for VC due to their mechanical softness and the rich array of vibrational motions of both their inorganic and organic sublattices. Here, we demonstrate the ultrafast VC of FAPbBr 3 perovskite solar cells via intramolecular vibrations of the formamidinium cation using spectroscopic techniques based on vibrationally promoted electronic resonance. The observed short (~300 fs) time window of VC highlights the fast dynamics of coupling between the cation and inorganic sublattice. First-principles modelling reveals that this coupling is mediated by hydrogen bonds that modulate both lead halide lattice and electronic states. Cation dynamics modulating this coupling may suppress non-radiative recombination in perovskites, leading to photovoltaics with reduced voltage losses.

36 MATERIALS SCIENCE↗