Search NASA⌕ Search

SEARCH · Search NASA

Results for “Outer Approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Low-energy electron holographic imaging of individual tobacco mosaic virions

Modern structural biology relies on Nuclear Magnetic Resonance (NMR), X-ray crystallography, and cryo-electron microscopy for gaining information on biomolecules at nanometer, sub-nanometer, or atomic resolution. All these methods, however, require averaging over a vast ensemble of entities, and hence knowledge on the conformational landscape of an individual particle is lost. Unfortunately, there are now strong indications that even X-ray free electron lasers will not be able to image individual molecules but will require nanocrystal samples. Here, we show that non-destructive structural biology of single particles has now become possible by means of low-energy electron holography. As an example, individual tobacco mosaic virions deposited on ultraclean freestanding graphene are imaged at 1 nm resolution revealing structural details arising from the helical arrangement of the outer protein shell of the virus. Since low-energy electron holography is a lens-less technique and since electrons with a deBroglie wavelength of approximately 1 Å do not impose radiation damage to biomolecules, the method has the potential for Angstrom resolution imaging of single biomolecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Partnership for Edge Physics Simulation

A major goal of our participation in the Edge Physics Simulation project has been to contribute to the understanding of the self-organization of tokamak turbulence fluctuations resulting in the formation of a staircase structure in the ion temperature. A second important goal is to demonstrate how small scale turbulence in plasmas self-organizes with dynamically driven quasi-stationary flow shear. These goals have been accomplished through the analyses of the statistical properties of XGC1 flux driven Gyrokinetic electrostatic ion temperature gradient (ITG) turbulence simulation data in which neutrals are included. The ITG turbulence data, and in particular fluctuation data, were obtained from a massively parallel flux-driven gyrokinetic full-f particle-in-cell simulation of a DIII-D like equilibrium. Below some the findings are summarized. It was observed that the emergence of staircase structure is related to the variations in the normalized temperature gradient length (R/LT) and the poloidal flow shear. Average turbulence intensity is found to be large in the vicinity of minima in R/LTi, where ITG growth is expected to be lower. The distributions of the occurrences of potential fluctuation are found to be Gaussian away from the staircase-step locations, but they are found to be non-Gaussian in the vicinity of staircase-step locations. The results of analytically derived expressions for the distribution of the occurrences of turbulence intensity and intensity flux were compared with the corresponding quantities computed using XGC1 simulation data and good agreement is found. The derived expressions predicts inward and outward propagation of turbulence intensity flux in an intermittent fashion. The outward propagation of turbulence intensity flux occurs at staircase-step locations and is related to the change in poloidal flow velocity shear and to the change in the ion temperature gradient. The standard deviation, skewness and kurtosis for turbulence quantities were computed and found to be large in the vicinity of the staircase-step structures. Large values of skewness and kurtosis can be explained by a temporary opening and closing of the structure which allows turbulence intensity events to propagate. The staircase patterns may reduce the ion heat transport and a manipulation of these patterns may be used to optimize heat transport in tokamaks. An additional objective of the research in support of the Edge Physics Simulation initiative has been to improve the understanding of scrape-off layer thermal transport. In planning experiments and designing future tokamaks, it is important to understand the physical effects that contribute to divertor heat-load fluxes. The research accomplished will contribute to developing new models for the scrape-off layer region. The XGC0 code was used to compute the heat fluxes and the heat-load width in the outer divertor plates of C-Mod and DIII-D tokamaks. It was observed that the width of the XGC0 neoclassical heat-load was approximately inversely proportional to the total plasma current. Anomalous transport in the H-mode pedestal region of five Alcator C-Mod discharges, representing a collisionality scan, was analyzed. The understanding of anomalous transport in the pedestal region is important for the development of a comprehensive model for the H-mode pedestal slope. It was found that the electron thermal anomalous diffusivities at the pedestal top increase with the electron collisionality. This dependence can point to the DRIBM as the modes that drive the anomalous transport in the plasma edge of highly collisional discharges. The effects of plasma shaping on the H-mode pedestal structure was also investigated. The differences in the predicted H-mode pedestal width and height for the DIII-D discharges with different elongation and triangularities were discussed. For the discharges with higher elongation, it was found that the gradients of the plasma profiles in the H-mode pedestal reach semi-steady states. In these simulations, the pedestal slowly continued to evolve to higher pedestal pressures and bootstrap currents until the peeling ballooning stability conditions were satisfied. The discharges with lower elongation do not reach the semi-steady state, and ELM crashes were triggered at earlier times. The plasma elongation was found to have a stronger stabilizing effect than the plasma triangularity. For the discharges with lower elongation and lower triangularity, the ELM frequency was large, and the H-mode pedestal evolves rapidly. It was found that the temperature of neutrals in the scrape-off-layer region can affect the dynamics of the H-mode pedestal buildup. However, the final pedestal profiles were nearly independent of the neutral temperature. The elongation and triangularity affected the pedestal widths of plasma density and electron temperature profiles differently. This study illustrated a new mechanism for controlling the pedestal bootstrap current and the pedestal stability.

97 MATHEMATICS AND COMPUTING↗

Setting up resistive wall modeling for the GA Compact Advanced Tokamak (GA FPP) (Final Report)

Resistive wall implementation for tokamaks has been achieved by both a 'thin wall' approximation in which time-varying fields are matched across a boundary for all modes; and, by meshing the region from the first wall to the outer boundary and setting certain fields to mimic a resistive wall. Both implementations were tested on existing tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of the plasma shapes on intrinsic rotation due to collisionless ion orbit loss in the tokamak edge plasmas

Distribution of the intrinsic rotation due to collisionless ion orbit loss near the tokamak edge region is studied by using an analytical model based on ion guiding center orbit approximation. A peak of the averaged ion orbit loss momentum fraction is found very near inside the separatrix region in a double null divertor configuration but is not found inside the last closed flux surface region in an outer limiter configuration. For the double null divertor configuration, the intrinsic rotation due to ion orbit loss depends on the plasma shape. With the increase in elongation and triangularity, the peak of the averaged ion orbit loss momentum fraction increases and it moves inward for the lower plasma current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Temperature Corrosion of a Pt-30 wt.% Rh Alloy in a Phosphorizing Gas

High temperature corrosion of a Pt-30 wt.% Rh alloy in a phosphorizing gas was isothermally investigated at 1285 K using a gas switching technique. Diffusion of P into the alloy created an outer layer of Pt-rich liquid and blocky (Pt, Rh) 2 P precipitates along with an inner layer of fcc and (Pt, Rh) 2 P plates in a cellular microstructure. Concentration profiles measured by SEM-WDS and EPMA across the layers at room temperature showed that there were three fcc phases: first was a 12 at.% Rh phase in the outer layer; second was a 37 at.% Rh phase in the cellular microstructure; and third was the initial 43 at.% Rh alloy. Also, the EPMA data registered approximately 0.1 at.% P in fcc of these layers. Based on the surrounding binary phase diagrams and the experimental data obtained in this study, a partial Pt-Rh-P phase diagram was constructed. A diffusion path for the corrosion microstructure was drawn on the partial phase diagram to help develop a step by step model for how the microstructure evolved. In conclusion, growth kinetics of the inner layer were used to calculate a P diffusivity of about 10 –12 m 2 /s in the Pt-Rh alloy at 1285 K, suggesting rapid diffusion by either an interstitial or interstitialcy mechanism.

36 MATERIALS SCIENCE↗

Effect of stellar encounters on comet cloud formation

We have investigated the effect of stellar encounters on the formation and disruption of the Oort cloud using the classical impulse approximation. We calculate the evolution of a planetesimal disk into a spherical Oort cloud due to the perturbation from passing stars for 10 Gyr. We obtain the empirical fits of the e-folding time for the number of Oort cloud comets using the standard exponential and Kohlrausch formulae as functions of the stellar parameters and the initial semimajor axes of planetesimals. The e-folding time and the evolution timescales of the orbital elements are also analytically derived. In some calculations, the effect of the Galactic tide is additionally considered. We also show the radial variations of the e-folding times to the Oort cloud. From these timescales, we show that if the initial planetesimal disk has the semimajor axes distribution dn/da∝a{sup −2}, which is produced by planetary scattering, the e-folding time for planetesimals in the Oort cloud is ∼10 Gyr at any heliocentric distance r. This uniform e-folding time over the Oort cloud means that the supply of comets from the inner Oort cloud to the outer Oort cloud is sufficiently effective to keep the comet distribution as dn/dr∝r{sup −2}. We also show that the final distribution of the semimajor axes in the Oort cloud is approximately proportional to a{sup −2} for any initial distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ 3‐D mapping of pore structures and hollow grains of interplanetary dust particles with phase contrast X‐ray nanotomography

Abstract Unlocking the 3‐D structure and properties of intact chondritic porous interplanetary dust particles ( IDP s) in nanoscale detail is challenging, which is also complicated by atmospheric entry heating, but is important for advancing our understanding of the formation and origins of IDP s and planetary bodies as well as dust and ice agglomeration in the outer protoplanetary disk. Here, we show that indigenous pores, pristine grains, and thermal alteration products throughout intact particles can be noninvasively visualized and distinguished morphologically and microstructurally in 3‐D detail down to ~10 nm by exploiting phase contrast X‐ray nanotomography. We have uncovered the surprisingly intricate, submicron, and nanoscale pore structures of a ~10‐μm‐long porous IDP , consisting of two types of voids that are interconnected in 3‐D space. One is morphologically primitive and mostly submicron‐sized intergranular voids that are ubiquitous; the other is morphologically advanced and well‐defined intragranular nanoholes that run through the approximate centers of ~0.3 μm or lower submicron hollow grains. The distinct hollow grains exhibit complex 3‐D morphologies but in 2‐D projections resemble typical organic hollow globules observed by transmission electron microscopy. The particle, with its outer region characterized by rough vesicular structures due to thermal alteration, has turned out to be an inherently fragile and intricately submicron‐ and nanoporous aggregate of the sub‐μm grains or grain clumps that are delicately bound together frequently with little grain‐to‐grain contact in 3‐D space.

Hu, Z. W.↗

A Measure Approximation for Distributionally Robust PDE-Constrained Optimization Problems

In numerous applications, scientists and engineers acquire varied forms of data that partially characterize the inputs to an underlying physical system. This data is then used to inform decisions such as controls and designs. Consequently, it is critical that the resulting control or design is robust to the inherent uncertainties associated with the unknown probabilistic characterization of the model inputs. Here in this work, we consider optimal control and design problems constrained by partial differential equations with uncertain inputs. We do not assume a known probabilistic model for the inputs, but rather we formulate the problem as a distributionally robust optimization problem where the outer minimization problem determines the control or design, while the inner maximization problem determines the worst-case probability measure that matches desired characteristics of the data. We analyze the inner maximization problem in the space of measures and introduce a novel measure approximation technique, based on the approximation of continuous functions, to discretize the unknown probability measure. Finally, we prove consistency of our approximated min-max problem and conclude with numerical results.

54 ENVIRONMENTAL SCIENCES↗

WHICH RADIAL VELOCITY EXOPLANETS HAVE UNDETECTED OUTER COMPANIONS?

The observed radial velocity (RV) eccentricity distribution for extrasolar planets in single-planet systems shows that a significant fraction of planets are eccentric (e > 0.1). However, an RV planet's eccentricity, which comes from the Keplerian fitting, can be biased by low signal-to-noise ratio and poor sampling. Here, we investigate the effects on eccentricity produced by undetected outer companions. We have carried out Monte Carlo simulations of mock RV data to understand this effect and predict its impact on the observed distribution. We first quantify the statistical bias of known RV planets' eccentricities produced by undetected zero-eccentricity wide-separation companions and show that this effect alone cannot explain the observed distribution. We then modify the simulations to consist of two populations, one of zero-eccentricity planets in double-planet systems and the other of single planets drawn from an eccentric distribution. Our simulations show that a good fit to the observed distribution is obtained with 45% zero-eccentricity double planets and 55% single eccentric planets. Assuming that our two simulated populations of planets are a good approximation for the true RV population, matching the observed distribution allows us to determine the probability that a known RV planet's orbital eccentricity has been biased by an undetected wide-separation companion. Averaged over eccentricity we calculate this probability to be {approx}4%, suggesting that a small fraction of systems may have a yet to be discovered outer companion. Our simulations show that moderately eccentric planets, with 0.1 < e < 0.3 and 0.1 < e < 0.2, have a {approx}13% and {approx}19% probability, respectively, of having an undetected outer companion. We encourage both high-contrast direct imaging and RV follow-up surveys of known RV planets with moderate eccentricities to test our predictions and look for previously undetected outer companions.

79 ASTRONOMY AND ASTROPHYSICS↗

KEPLER-18b, c, AND d: A SYSTEM OF THREE PLANETS CONFIRMED BY TRANSIT TIMING VARIATIONS, LIGHT CURVE VALIDATION, WARM-SPITZER PHOTOMETRY, AND RADIAL VELOCITY MEASUREMENTS

We report the detection of three transiting planets around a Sun-like star, which we designate Kepler-18. The transit signals were detected in photometric data from the Kepler satellite, and were confirmed to arise from planets using a combination of large transit-timing variations (TTVs), radial velocity variations, Warm-Spitzer observations, and statistical analysis of false-positive probabilities. The Kepler-18 star has a mass of 0.97 M{sub sun}, a radius of 1.1 R{sub sun}, an effective temperature of 5345 K, and an iron abundance of [Fe/H] = +0.19. The planets have orbital periods of approximately 3.5, 7.6, and 14.9 days. The innermost planet 'b' is a 'super-Earth' with a mass of 6.9 {+-} 3.4 M{sub +}, a radius of 2.00 {+-} 0.10 R{sub +}, and a mean density of 4.9 {+-} 2.4 g cm{sup 3}. The two outer planets 'c' and 'd' are both low-density Neptune-mass planets. Kepler-18c has a mass of 17.3 {+-} 1.9 M{sub +}, a radius of 5.49 {+-} 0.26 R{sub +}, and a mean density of 0.59 {+-} 0.07 g cm{sup 3}, while Kepler-18d has a mass of 16.4 {+-} 1.4 M{sub +}, a radius of 6.98 {+-} 0.33 R{sub +} and a mean density of 0.27 {+-} 0.03 g cm{sup 3}. Kepler-18c and Kepler-18d have orbital periods near a 2:1 mean-motion resonance, leading to large and readily detected TTVs.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTI-SCALE MODELING AND APPROXIMATION ASSISTED OPTIMIZATION OF BARE TUBE HEAT EXCHANGERS

Air-to-refrigerant heat exchangers are very common in air-conditioning, heat pump and refrigeration applications. In these heat exchangers, there is a great benefit in terms of size, weight, refrigerant charge and heat transfer coefficient, by moving from conventional channel sizes (~ 9mm) to smaller channel sizes (< 5mm). This work investigates new designs for air-to-refrigerant heat exchangers with tube outer diameter ranging from 0.5 to 2.0mm. The goal of this research is to develop and optimize the design of these heat exchangers and compare their performance with existing state of the art designs. The air-side performance of various tube bundle configurations are analyzed using a Parallel Parameterized CFD (PPCFD) technique. PPCFD allows for fast-parametric CFD analyses of various geometries with topology change. Approximation techniques drastically reduce the number of CFD evaluations required during optimization. Maximum Entropy Design method is used for sampling and Kriging method is used for metamodeling. Metamodels are developed for the air-side heat transfer coefficients and pressure drop as a function of tube-bundle dimensions and air velocity. The metamodels are then integrated with an air-to-refrigerant heat exchanger design code. This integration allows a multi-scale analysis of air-side performance heat exchangers including air-to-refrigerant heat transfer and phase change. Overall optimization is carried out using a multi-objective genetic algorithm. The optimal designs found can exhibit 50 percent size reduction, 75 percent decrease in air side pressure drop and doubled air heat transfer coefficients compared to a high performance compact micro channel heat exchanger with same capacity and flow rates.

CFD↗

Characterizing the seismic response of a molten salt nuclear reactor

Abstract One Generation IV nuclear reactor, which uses a fluoride salt as a coolant, graphite reflector blocks as a moderator, and circulating buoyant TRISO pebbles as fuel is at an advanced stage of development. To characterize the seismic behavior of components of this reactor, validate numerical models for analysis, and develop recommendations for design, a set of earthquake‐simulator experiments on a scaled model of the reactor vessel and its internals was executed on a six‐degree‐of‐freedom earthquake simulator. The model was seismically isolated at its base using two types of spherical sliding bearings. The scaled model involved representations of the prototype reactor vessel, core barrel, reflector blocks, coolant, and spherical fuel pebbles. The material and geometric properties of different test components were selected based on a dynamic similitude scaling analysis and an approximate length scale of 0.4. Four sets of three‐component earthquake motions were used as inputs for testing. Instrumentation on the test specimen recorded the dynamic responses of the outer vessel, core barrel, and reflector‐block assembly, the hydrodynamic responses (sloshing and hydrodynamic pressure) of the liquid coolant, pebble consolidation under earthquake shaking, and the behavior of the isolation systems. This paper describes the design of the experiments and presents key results from the tests. The dynamic responses of the outer vessel, core barrel, and the reflector blocks revealed that the components responded as a unit for the intense shaking used in the experiments. The sloshing response of the fluid in a thin annulus near the perimeter of the vessel was heavily damped. The change in the packing fraction of the pebble bed under repeated, intense 3D earthquake shaking was less than 3%. Seismically isolating the vessel substantially reduced demands on its internal components.

Engineering↗

Structural features of transversal barrier in central channel of nuclear pore complex

The most important entity of the selective behavior of the nuclear pore complex (NPC) is considered to be the matter called 'barrier,' 'meshwork' or 'sieve.' This part of NPC has not been well elucidated by using electron microscopy methods to date. In the present study, we demonstrated the presence of a coherent transversal barrier in the central channel of NPC, using high resolution transmission electron microscopy. It was found that the barrier is located in the middle of the central channel, i.e. at the level where the outer and inner nuclear membranes fuse. The thickness of this layer is evidently different in various NPCs and usually varies between 20 and 30 nm and its diameter is approximately 40 nm. The cytoplasmic and nuclear surfaces of the barrier are roughly parallel and plane. Moreover we suggest that the barrier may not be interrupted by any channel(s), at least not with a diameter above 10 nm. Further various appearances of the central channel with different particles were observed, presumably cargos and karyopherins captured in transit. A different type of central channel barrier with lipid bilayer membrane-like appearance is also discussed. Highlights: Black-Right-Pointing-Pointer The meshwork in the central channel of nuclear pore complex is visualized. Black-Right-Pointing-Pointer This 'barrier' shows different thickness (from 20 nm to 30 nm) in different pores. Black-Right-Pointing-Pointer Cytoplasmic and nuclear surfaces of this barrier are roughly parallel and plane. Black-Right-Pointing-Pointer The barrier is not interrupted by any visible channel(s).

60 APPLIED LIFE SCIENCES↗

Direct stellarator coil optimization for nested magnetic surfaces with precise quasi-symmetry

We present a robust optimization algorithm for the design of electromagnetic coils that generate vacuum magnetic fields with nested flux surfaces and precise quasi-symmetry. The method is based on a bilevel optimization problem, where the outer coil optimization is constrained by a set of inner least squares optimization problems whose solutions describe magnetic surfaces. The outer optimization objective targets coils that generate a field with nested magnetic surfaces and good quasi-symmetry. The inner optimization problems identify magnetic surfaces when they exist, and approximate surfaces in the presence of magnetic islands or chaos. We show that this formulation can be used to heal islands and chaos, thus producing coils that result in magnetic fields with precise quasi-symmetry. We show that the method can be initialized with coils from the traditional two-stage coil design process, as well as coils from a near-axis expansion optimization. We present a numerical example where island chains are healed and quasi-symmetry is optimized up to surfaces with aspect ratio 6. Another numerical example illustrates that the aspect ratio of nested flux surfaces with optimized quasi-symmetry can be decreased from 6 to approximately 4. In conclusion, the last example shows that our approach is robust and a cold-start using coils from a near-axis expansion optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cost estimation inputs for spent nuclear fuel geologic disposal concepts (Revision 1)

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses. Revision 1 results from review and checking of repository spacings, drift length estimates, repository plan area estimates, closure power limits, and estimates of fuel age at closure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cost Estimation Inputs for Spent Nuclear Fuel Geologic Disposal Concepts

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nucleosynthesis of an 11.8 M ⊙ Supernova with 3D Simulation of the Inner Ejecta: Overall Yields and Implications for Short-lived Radionuclides in the Early Solar System

Based on a 3D supernova simulation of an 11.8 M ⊙ progenitor model with an initial solar composition, we study the nucleosynthesis using tracers covering the innermost 0.1 M ⊙ of the ejecta. These ejecta are mostly proton-rich and contribute significant amounts of 45 Sc and 64 Zn. The production of heavier isotopes is sensitive to the electron fraction and hence the neutrino emission from the proto-neutron star. The yields of these isotopes are rather uncertain due to the approximate neutrino transport used in the simulation. In order to obtain the total yields for the whole supernova, we combine the results from the tracers with those for the outer layers from a suitable 1D model. Using the yields of short-lived radionuclides (SLRs), we explore the possibility that an 11.8 M ⊙ supernova might have triggered the formation of the solar system and provided some of the SLRs measured in meteorites. In particular, we discuss two new scenarios that can account for at least the data on 41 Ca, 53 Mn, and 60 Fe without exceeding those on the other SLRs.

Astronomy & Astrophysics↗

Structural and orientation effects on electronic energy transfer between silicon quantum dots with dopants and with silver adsorbates

Starting from the atomic structure of silicon quantum dots (QDs), and utilizing ab initio electronic structure calculations within the Förster resonance energy transfer (FRET) treatment, a model has been developed to characterize electronic excitation energy transfer between QDs. Electronic energy transfer rates, K{sub EET}, between selected identical pairs of crystalline silicon quantum dots systems, either bare, doped with Al or P, or adsorbed with Ag and Ag{sub 3}, have been calculated and analyzed to extend previous work on light absorption by QDs. The effects of their size and relative orientation on energy transfer rates for each system have also been considered. Using time-dependent density functional theory and the hybrid functional HSE06, the FRET treatment was employed to model electronic energy transfer rates within the dipole-dipole interaction approximation. Calculations with adsorbed Ag show that: (a) addition of Ag increases rates up to 100 times, (b) addition of Ag{sub 3} increases rates up to 1000 times, (c) collinear alignment of permanent dipoles increases transfer rates by an order of magnitude compared to parallel orientation, and (d) smaller QD-size increases transfer due to greater electronic orbitals overlap. Calculations with dopants show that: (a) p-type and n-type dopants enhance energy transfer up to two orders of magnitude, (b) surface-doping with P and center-doping with Al show the greatest rates, and (c) K{sub EET} is largest for collinear permanent dipoles when the dopant is on the outer surface and for parallel permanent dipoles when the dopant is inside the QD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗