Search NASA⌕ Search

SEARCH · Search NASA

Results for “PALLADIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Dynamic and reversible transformations of subnanometre-sized palladium on ceria for efficient methane removal

Reversibly adjusting the active structures of supported metal catalysts in response to dynamic working conditions has long been pursued. Here we report the reaction-environment-modulated transformations of subnanometre-sized Pd on CeO 2 for efficient methane removal, leveraging the reaction environments at different stages of automotive exhaust aftertreatment. During the cold start of vehicles, inactive Pd 1 single atoms are readily transformed into PdO $x$ subnanometre clusters by CO even at room temperature with excess O 2 , resulting in boosted low-temperature CH 4 oxidation. At elevated temperatures, dispersion of PdO $x$ cluster into Pd 1 against metal sintering renders outstanding hydrothermal stability to the catalyst, to be activated during the next vehicle start. Combined experimental and computational studies elucidate the dynamically evolved Pd speciation on CeO 2 at an atomic level. In conclusion, modulating the reversible nature of supported metals helps overcome the long-existing trade-off between low-temperature activity and high-temperature stability, also providing a new paradigm for designing intelligent catalysts that brings single-atom/cluster catalysts closer to real applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomically dispersed palladium catalyses Suzuki–Miyaura reactions under phosphine-free conditions

Single-atom catalysts have emerged as a new frontier in catalysis science. However, their applications are still limited to small molecule activations in the gas phase, the classic organic transformations catalyzed by single-atom catalysts are still rare. Here, we report the use of a single-atom Pd catalyst for the classic Suzuki–Miyaura carbon–carbon coupling reaction under phosphine-free and open-air conditions at room temperature. The single-atom Pd catalyst is prepared through anchoring Pd on bimetal oxides (Pd-ZnO-ZrO 2 ). The significant synergetic effect of ZnO and ZrO 2 is observed. The catalyst exhibits high activity and tolerance of a wide scope of substrates. Characterization demonstrates that Pd single atoms are coordinated with two oxygen atoms in Pd-ZnO-ZrO 2 catalyst. The catalyst can be fabricated on a multi-gram scale using a simple in situ co-precipitation method, which endows this catalytic system with great potential in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface softening in palladium nanoparticles: effects of a capping agent on vibrational properties

The presence of a capping agent (CTAB) on Pd nanoparticles produces a strong static disorder in the surface region. This results in a surface softening, which contributes to an overall increase in the Debye–Waller coefficient measured by X-ray powder diffraction. Here, molecular dynamics and density functional theory simulations show that the adsorption-induced surface disorder is strong enough to overcome the effects of nanoparticle size and shape.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Structural trends in the dehydrogenation selectivity of palladium alloys

Alloying is well-known to improve the dehydrogenation selectivity of pure metals, but there remains considerable debate about the structural and electronic features of alloy surfaces that give rise to this behavior. To provide molecular-level insights into these effects, a series of Pd intermetallic alloy catalysts with Zn, Ga, In, Fe and Mn promoter elements was synthesized, and the structures were determined using in situ X-ray absorption spectroscopy (XAS) and synchrotron X-ray diffraction (XRD). The alloys all showed propane dehydrogenation turnover rates 5–8 times higher than monometallic Pd and selectivity to propylene of over 90%. Moreover, among the synthesized alloys, Pd 3 M alloy structures were less olefin selective than PdM alloys which were, in turn, almost 100% selective to propylene. This selectivity improvement was interpreted by changes in the DFT-calculated binding energies and activation energies for C–C and C–H bond activation, which are ultimately influenced by perturbation of the most stable adsorption site and changes to the d-band density of states. Furthermore, transition state analysis showed that the C–C bond breaking reactions require 4-fold ensemble sites, which are suggested to be required for non-selective, alkane hydrogenolysis reactions. These sites, which are not present on alloys with PdM structures, could be formed in the Pd 3 M alloy through substitution of one M atom with Pd, and this effect is suggested to be partially responsible for their slightly lower selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High Compression in Palladium Alloy Metal Foil Pumps

Metal foil pumps (MFPs) are key components in the direct internal recycling inner fuel cycle loop for the recovery of hydrogen isotopes from deuterium-tritium fusion exhaust. Operating under vacuum conditions, they utilize superthermal hydrogen as the feed gas in a process called superpermeation. A notable feature of MFPs is their ability to pump against a pressure gradient. This study examines the compression capabilities of PdAg and PdCu MFPs at low temperatures with a constant feed pressure of 10 Pa. At 75°C, compression ratios exceeding 200 were readily achieved, with downstream pressures exceeding 4500 Pa using PdCu. For both alloys, net fluxes decreased by only ~15% at downstream pressures of 1000 Pa, which offers potential simplifications for the downstream pump train. Performance declined markedly when the temperature was elevated to 200°C. Pump curves were constructed and advocated as the most appropriate manner to assess MFP performance. Separate pressure-driven-permeation experiments at relevant conditions were conducted, providing a direct measurement of the hydrogen dissociation constant $k$ d , which was found to be in good agreement with the previous literature. Further, these measurements were used to predict pump curves and maximum compression ratios by balancing superpermeation with pressure-driven permeation, achieving excellent agreement with experiment. Last, experiments using asymmetric MFPs revealed the detrimental impact that surface impurities have on performance in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Interstitial solute segregation at triple junctions: Implications for nanomaterials and a case study of hydrogen in palladium

At very fine grain sizes, grain boundary segregation can deviate from conventional behavior due to triple junction effects. While this issue has been addressed in prior work for substitutional alloys, here we develop a framework that accounts for interstitial sites in the grains, grain boundaries, and triple junctions of model Pd(H) polycrystals. This approach allows computation of interstitial segregation spectra separately at both defect types, which permits an understanding of segregation at all grain sizes via a size-scaling spectral isotherm. Here, the size dependencies of dilute Pd(H) are found to be influenced not only by the triple junction content, but also by grain size–dependent lattice strains; the latter effect is evidenced by size dependencies of individual grain boundary and junction subspectra. The framework proposed here is applicable to interstitial alloys in general and may serve as a basis for interfacial engineering in interstitial nanocrystalline alloys. As an example, we show that using the dilute limit isotherm, hydrogen density can triple in nanocrystalline vis-à-vis microcrystalline Pd due to hydrogen adsorption at intergranular defect sites.

Alloys↗
DOE OSTI2021

Life Cycle Inventories for Palladium on Niobium Phosphate (Pd/NbOPO 4 ) and Zirconium Oxide (ZrO 2 ) Catalysts

We report the cradle-to-gate GHG emissions, fossil fuel consumption, and water consumption for Nb 2 O 5 , KNbO 3 , NbOPO 4 , Pd, Pd/NbOPO 4 , ZrSiO 4 , and ZrO 2 . Notably, the net GHG emissions impact of the Pd/NbOPO 4 catalyst is 8.5 kg CO 2 e/kg catalyst, which is comparable to other catalysts in GREET, while the net GHG emissions of the ZrO 2 catalyst is considerably lower at 1.8 kg CO 2 e/kg catalyst. We also identify the primary contributors to each catalyst’s cradle-to-gate environmental burden. For the Pd/NbOPO 4 catalyst, Pd metal is the main driver of GHG emissions and fossil fuel consumption, while Pd and NbOPO 4 contribute almost equally to water consumption. For the ZrO 2 catalyst, sodium hydroxide (NaOH) is the principal driver of GHG emissions and fossil fuel consumption, while ZrSiO 4 is the main consumer of water. The Pd/NbOPO 4 and ZrO 2 catalysts, as well as Nb 2 O 5 , KNbO 3 , NbOPO 4 , and ZrSiO 4 , are implemented in the GREET catalyst module, and Pd has been implemented in GREET2 (Kingsbury and Benavides 2021). The material and energy flows for these new materials will be useful to future LCAs, particularly those involving biofuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Molecular Dynamics Simulations of Helium Bubble Formation in Palladium Tritides [Slides]

Pd readily absorbs hydrogen and its isotopes, and can be used to purify gas mixtures involving tritium. Tritium decays to He, forming He bubbles. Bubbles causes possible PCT effects swelling, He release, all leading to failures. Radioactive decay experiments take many years. Molecular dynamics (MD) studies can be quickly done. No previous MD methods can simulate He bubble nucleation and growth.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Molecular Dynamics Simulations of Helium Bubble Formation in Palladium Tritides [Slides]

Pd readily absorbs hydrogen and its isotopes, and can be used to purify gas mixtures involving tritium. Tritium decays to He, forming He bubbles. Bubbles causes possible PCT effects swelling, He release, all leading to failures. Radioactive decay experiments take many years. Molecular dynamics (MD) studies can be quickly done. No previous MD methods can simulate He bubble nucleation and growth.

74 ATOMIC AND MOLECULAR PHYSICS↗