Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Space shuttle main engine controller assembly, phase C-D

System design and system analysis and simulation are slightly behind schedule, while design verification testing has improved. Input/output circuit design has improved, but digital computer unit (DCU) and mechanical design continue to lag. Part procurement was impacted by delays in printed circuit board, assembly drawing releases. These are the result of problems in generating suitable printed circuit artwork for the very complex and high density multilayer boards.

Source record↗
NASA NTRS1975

Program to design, fabricate, test, and deliver a thermal control-mixing control device, phase 1

The development of a sensor capable of detecting temperature changes as a function of viscosity changes, was completed. This type of sensor, consisting of an orifice bridge circuit, resulted in a device with a threshold above internally generated noise of 0.8C (1.5F). Data were obtained using a noise free Freon source provided by an air pressurized bladder. Tests conducted to operate the sensor from a typical Freon centrifugal pump system employing an air bubble accumulator for noise attentuation disclosed the sensor could be used only to sense temperature changes greater than 3.3C (6F) because of the excessively noisy output. This is attributed to the high frequency-pressure fluctuations in the Freon supply to the sensor.

Thurston, T. S.↗
NASA NTRS1982

Grating lobe characteristics and associated impacts upon the solar power satellite microwave system

The object of this investigation is to determine the grating lobe characteristics for the SPS (solar power satellite) microwave power beam. Using techniques of Fourier array decomposition, equations, and numerical results are given for the complete SPS microwave antenna pattern (main beam plus grating lobes). In order to ensure the grating lobe peaks are below the environmental guideline of 0.01 mW/sq cm, constraints are defined for the mechanical alignment (tilt) of the SPS antenna and the satellite attitude control system. Two conditions, phase control to the subarray level and to the power module (tube) level, are analyzed as to their effects upon grating lobes.

Kerwin, E. M.↗
NASA NTRS1986

Development of rotorcraft interior noise control concepts. Phase 2: Full scale testing, revision 1

The phase 2 effort consisted of a series of ground and flight test measurements to obtain data for validation of the Statistical Energy Analysis (SEA) model. Included in the gound tests were various transfer function measurements between vibratory and acoustic subsystems, vibration and acoustic decay rate measurements, and coherent source measurements. The bulk of these, the vibration transfer functions, were used for SEA model validation, while the others provided information for characterization of damping and reverberation time of the subsystems. The flight test program included measurements of cabin and cockpit sound pressure level, frame and panel vibration level, and vibration levels at the main transmission attachment locations. Comparisons between measured and predicted subsystem excitation levels from both ground and flight testing were evaluated. The ground test data show good correlation with predictions of vibration levels throughout the cabin overhead for all excitations. The flight test results also indicate excellent correlation of inflight sound pressure measurements to sound pressure levels predicted by the SEA model, where the average aircraft speech interference level is predicted within 0.2 dB.

Yoerkie, C. A.↗
NASA NTRS2005

Frequency and Phase-lock Control of a 3 THz Quantum Cascade Laser

We have locked the frequency of a 3 THz quantum cascade laser (QCL) to that of a far-infrared gas laser with a tunable microwave offset frequency. The locked QCL line shape is essentially Gaussian, with linewidths of 65 and 141 kHz at the -3 and -10 dB levels, respectively. The lock condition can be maintained indefinitely, without requiring temperature or bias current regulation of the QCL other than that provided by the lock error signal. The result demonstrates that a terahertz QCL can be frequency controlled with l-part-in-lO(exp 8) accuracy, which is a factor of 100 better than that needed for a local oscillator in a heterodyne receiver for atmospheric and astronomic spectroscopy.

Betz, A. L.↗
NASA NTRS2016

Thermal Stability Testing of Two-Phase Thermal Control Hardware for the Surface Water Ocean Topography Mission

The thermal architecture for the Surface Water Ocean Topography mission utilizes loop heat pipes and constant conductance heat pipes to transport waste heat (> 1000 Watts) from the instrument electronics to the radiator. The main thermal design risk is the ability to maintain a temporal stability of <0.05 Celsius per minute in a low earth orbit environment. The stringent thermal requirements are part of the overall error budget needed to meet the primary mission science objectives. A testbed was developed to simulate flight-like loads and environments in order to validate the thermal subsystem can meet the temporal stability requirements. Preliminary testing showed that the thermal control system can meet the stability requirement and that loop heat pipes are actually helping to maintain stability during transient sink temperature changes for this specific flight application and boundary conditions.

Somawardhana, Ruwan P.↗
NASA NTRS2018

Output Feedback Adaptive Control of Non-Minimum Phase Systems Using Optimal Control Modification

This paper describes output feedback adaptive control approaches for non-minimum phase SISO systems with relative degree 1 and non-strictly positive real (SPR) MIMO systems with uniform relative degree 1 using the optimal control modification method. It is well-known that the standard model-reference adaptive control (MRAC) cannot be used to control non-SPR plants to track an ideal SPR reference model. Due to the ideal property of asymptotic tracking, MRAC attempts an unstable pole-zero cancellation which results in unbounded signals for non-minimum phase SISO systems. The optimal control modification can be used to prevent the unstable pole-zero cancellation which results in a stable adaptation of non-minimum phase SISO systems. However, the tracking performance using this approach could suffer if the unstable zero is located far away from the imaginary axis. The tracking performance can be recovered by using an observer-based output feedback adaptive control approach which uses a Luenberger observer design to estimate the state information of the plant. Instead of explicitly specifying an ideal SPR reference model, the reference model is established from the linear quadratic optimal control to account for the non-minimum phase behavior of the plant. With this non-minimum phase reference model, the observer-based output feedback adaptive control can maintain stability as well as tracking performance. However, in the presence of the mismatch between the SPR reference model and the non-minimum phase plant, the standard MRAC results in unbounded signals, whereas a stable adaptation can be achieved with the optimal control modification. An application of output feedback adaptive control for a flexible wing aircraft illustrates the approaches.

Adaptive Contro↗
NASA NTRS1978

Modulation of the Jovian emission below 8 MHz

RAE-1 data on Jovian decametric emission between 1 and 8 MHz are analyzed to investigate modulation of the emission with respect to the rotation phase of the planet and Io phase as well as a possible variation with flux density of the rotation-phase and Io-phase control below 8 MHz. Attention is given to the observing interval, identification of Jovian emission, orbital-phase constraint, and calculated emission occurrence probabilities. Five frequencies are selected for the analysis (6550, 4700, 3930, 2200, and 1310 kHz), and System III coordinates are used to illustrate the rotation-phase behavior. The spectral distribution of peak flux density is examined along with the overall occurrence probability, the individual modulations, theoretical implications of invariance of active Io phases, and possible modulation by Europa. The results show that Io exerts a suprisingly high degree of control at the low frequencies, that rotation-phase control is only marginal, and that the manner in which Io control is found to vary with flux density is consistent with previous findings at higher frequencies.

Desch, M. D.↗
DOE OSTI2024

Mechanical suppression of invasive Northern Pike in Box Canyon Reservoir, Washington

Abstract Objective Northern Pike Esox lucius recently invaded Box Canyon Reservoir, Washington, expanding to over 10,000 individuals by 2011. To limit further impacts, a significant reduction in population abundance was required. Project objectives were to reduce relative abundance (catch per unit effort [CPUE]) to less than 1.7 Northern Pike/net (87% reduction) in the core area and to less than 0.5 Northern Pike/net in the northern reservoir section within 3 years and then maintain those abundance targets thereafter. Methods Using gill nets, we conducted intensive annual (2012–2018) suppression each spring, focusing on spawning aggregations in shallow (<2-m), flooded habitats. To evaluate CPUE, a standardized spring pike index netting (SPIN) survey was conducted annually in May and compared to suppression netting CPUE. Result In total, 17,464 Northern Pike were removed in 4868 net sets, with 92.9% captured in the first 3 years, limiting future recruitment. Mean SPIN CPUE in the core area declined from a presuppression (2011) high of 13.2 Northern Pike/net to less than 1.0 Northern Pike/net by 2014. Effort was reduced by up to 80% as the project transitioned from the initial suppression phase (2012–2014) to a control phase (2015–2018), which explored the minimum effort required to maintain abundance targets. A significant rebound in CPUE occurred from 2017 to 2018, indicating that over 267 net sets annually may be required for long-term control. Although the mean CPUE (±95% confidence interval) increased slightly in 2018 (0.6 ± 0.5 Northern Pike/net), the target abundance in the core area was achieved annually from 2013 to 2018. Changes in suppression CPUE reflected those observed in SPIN surveys, further validating the survey and corroborating abundance trends. Conclusion Results demonstrate that the suppression of Northern Pike in large, complex waters is feasible but requires a substantial long-term commitment. We expect the suppression of this invasive species to become standard practice outside of its native range. The methodology and equipment described here could be applied directly or modified by others to suppress Northern Pike.

Bean, Nicholas J.↗
NASA NTRS1992

Digital implementation of vibration suppression controllers for LSS

A synthesis procedure for positivity controllers is described, and both simulation and experimental results for vibration suppression control experiments at the NASA Marshall ACES and the NASA Langley MiniMAST ground test facilities are presented. Positivity-designed controllers provide general stability robustness to modeling errors, coupled with controller phase compensation which provides stability margins required for actual implementation. A multivariable scaling method of positivity-designed controllers is used for the on-line tuning of nominal digital controllers. A phase compensation method uses model information to predict system measurements and controller states for compensating the nominal controllers for unmodeled time delays in the system.

Bosse, A.↗
NASA NTRS2006

Adaptive Nulling for the Terrestrial Planet Finder Interferometer

Deep, stable starlight nulls are needed for the direct detection of Earth-like planets and require careful control of the intensity and phases of the beams that are being combined. We are testing a novel compensator based on a deformable mirror to correct the intensity and phase at each wavelength and polarization across the nulling bandwidth. We have successfully demonstrated intensity and phase control using a deformable mirror across a 100nm wide band in the near-IR, and are in the process of conducting experiments in the mid-IR wavelengths. This paper covers the current results and in the mid-IR.

amplitude and phase correction↗
NASA NTRS2004

Near IR demonstration of adaptive nuller based on deformable mirror

Deep stable nulling of starlight requires careful control of the intensity and phases of the beams that are being combined. We are in the process of demonstrating a compensator based on a deformable mirror to correct the intensity and phase at each wavelength and polarization across the nulling bandwidth. We have demonstrated intensity and phase control at a single wavelength in the near-IR, and we are preparing to demonstrate control with our deformable mirror actuator in the near-IR. In parallel, we are also preparing a demonstration in the mid-IR

Lay, Oliver P.↗
NASA NTRS1980

The microprocessor-based synthesizer controller

Implementation and performance of the microprocessor-based controllers and Dana Digiphase Synthesizer (DCO) installed in the Deep Space Network exciter in the 64-meter and 34-meter subnets to support uplink tuning required for the Voyager-Saturn Encounter is discussed. Test data in tests conducted during the production of the controllers verified the design objective for phase control accuracy of 10 to the - 12 power cycles in eight hours during ramping. Tests conducted require a phase error between a theoretical calculated value and the actual phase of no greater than + or - 1 cycle. Tests included (1) a ramp over a period of eight hours using a ramp rate which covers the synthesizer tuning range (40-51 MHz) and (2) a ramp sequence using the maximum rate (+ or kHz/s) over the tuning range.

Wick, M. R.↗