Search NASA⌕ Search

SEARCH · Search NASA

Results for “PIPER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO 2

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. Interfacial mixing can readily occur at temperatures required for complete film crystallization and can significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here we show a two-step sequence involving the growth of an epitaxial LiCoO 2 cathode layer followed by the deposition of a binary transition metal oxide (WO 3 , TiO 2 , and others) in which controlled lithiation of the binary oxide occurs. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li 2 WO 4 and model anode material Li 4 Ti 5 O 12 occurs as WO 3 and TiO 2 nucleate their respective host lattices and attract Li ions from the underlying cathode. The cathode layer readily provides a tunable amount of Li ions for the controlled lithiation of the subsequent layer. We demonstrate that this approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Photonic Curing Processing Conditions on MAPbI 3 Film Properties and Solar Cell Performance

Thermal annealing is the most used postdeposition materials processing method in laboratory research, but due to its slow speed and high energy cost, it is not compatible with the upscaling and commercialization of perovskite solar cell (PSC) manufacturing. Here, we adapt photonic curing (PC), which uses millisecond light pulses to deliver energy to the sample, to replace thermal annealing for crystallization of methylammonium lead iodide (MAPbI 3 ) films and rapid fabrication of PSCs. We study how PC conditions affect the outcome of MAPbI 3 conversion from the precursor to the crystalline perovskite phase by evaluating the films’ optical, crystalline, and morphological properties, as well as PSC performance. The results are understood using simulated film temperature profiles. We show that MAPbI 3 is readily converted under a wide range of PC conditions. While previous reports all used short pulses (<3 ms), we find that longer pulses produce more dense films and higher-performing PSCs. We achieve a champion power conversion efficiency in a PC-processed MAPbI 3 PSC of 11.26% under forward scan and 10.34% under reverse scan, with the processing time for the MAPbI 3 layer reduced by 30,000-fold, from 10 min to 20 ms. Using a 6 in. lamp, spatial uniformity tests show a cross-web efficiency variation of 5%. Our results indicate that using longer pulse lengths, >10 ms, is the best PC strategy for perovskite conversion, and PC is a promising annealing method for large-area, high-throughput PSC manufacturing.

14 SOLAR ENERGY↗

Elucidating Diiodomethane-Induced Improvement in Photonically Cured MAPbI 3 Solar Cells

Diiodomethane (CH 2 I 2 ) has been reported to improve the photonically cured perovskite solar cell (PSC) device performance by reducing pinholes. Here we show that even for pinhole-free methylammonium lead iodide (MAPbI 3 ) made by photonic curing, adding CH 2 I 2 promotes significant performance improvement. We elucidate the mechanisms behind the observed improvement. In addition to current-density versus voltage measurements, we perform a wide variety of characterization to compare the crystallinity, grain structure, optical, chemical, and electrical properties of the photonically cured samples with and without CH 2 I 2 in the MAPbI 3 layer to those of thermally annealed devices. Here, the addition of CH 2 I 2 promotes grain growth in the vertical direction, increases the I/Pb ratio in the final film, and removes the I - ionic diffusion and defect signature associated with iodine interstitials. As a result, we achieve a champion efficiency of 15.04% with MAPbI 3 conversion time of 20 ms, comparable to PSCs that have MAPbI 3 layer thermally annealed for 10 min. Understanding the mechanisms behind additive-induced improvements for non-thermal annealing processes is critical to enabling high-speed PSC manufacturing.

14 SOLAR ENERGY↗

Structural Changes in a High-Energy Density VO 2 F Cathode upon Heating and Li Cycling

Structural changes in VO 2 F, which allow two-electron transfer during electrochemical Li cycling, were investigated in this work. This compound adopts a rhombohedral structure, space group $R\overline{3}c$, with O and F sharing one site, and was synthesized by high-energy ball-milling. The thermal stability of VO 2 F, which is related to the battery safety, is studied by in situ XRD upon heating and by thermal gravimetric analysis. VO 2 F is found to be stable up to 160 °C under inert atmosphere; above this temperature, it converts into vanadium oxide with fluorine loss. The structure evolution upon lithium cycling was studied by ex situ X-ray diffraction and absorption techniques. The results show that lithiation of VO 2 F goes through a solid-solution reaction, and the rhombohedral structure is preserved if no more than one lithium ion is intercalated. Upon a second Li insertion, an irreversible transition to a rock-salt structure occurs. We show using first-principles calculations that this irreversible transformation can be explained by an asymmetric energetic preference between the rhombohedral and rock-salt forms of Li x VO 2 F, which result in large thermodynamic driving forces to convert to the rock-salt structure at x > 1 and relatively small thermodynamic driving forces to convert back to the rhombohedral structure when delithiating to x < 1.

25 ENERGY STORAGE↗

Nonstoichiometry and Defects in Hydrothermally Synthesized ε-LiVOPO 4

ε-LiVOPO 4 has been synthesized through the hydrothermal method by adjusting the pH of the hydrothermal solution and the reaction temperature. This phase is formed between 180 and 220 °C, as diamond-like crystals around 10–15 μm in size. X-ray diffraction (XRD) analysis shows that hydrothermal ε-LiVOPO 4 lattice parameters a and b linearly decrease, while c linearly increases when the synthesis temperature increases. Thermogravimetric analysis with mass spectroscopy reveals 1.5 to 0.5% water loss at about 350 °C for ε-LiVOPO 4 synthesized at 180 and 220 °C, suggesting water or protons incorporation into the structure. Magnetic studies reveal ferrimagnetism in hydrothermal ε-LiVOPO 4 below 10 K, as opposed to antiferromagnetic ordering below 14 K found in samples synthesized at high temperature. In-situ XRD upon heating of the hydrothermal ε-LiVOPO 4 synthesized at 180, 200, and 220 °C reveals that the temperature dependences of their lattice parameters merge at about 500 °C; furthermore, at the same temperature the structure reversibly changes from triclinic to monoclinic. The lattice parameters and the magnetic properties of the hydrothermal samples heated to 750 °C are similar to those of solid-state synthesized ε-LiVOPO 4 . Based on structure and composition analysis, we suggest that hydrothermal samples can be described as an ε-Li 1+ x H y V 1– z OPO 4 ( x , y , z < 0.1) solid solution. The electrochemical characterization of hydrothermal ε-LiVOPO 4 reveals the first cycle capacity of about 300 mAh/g, which holds for about five cycles, gradually decreasing thereafter. The low-voltage region does not reveal voltage plateaus corresponding to Li 1.5 VOPO 4 and Li 1.75 VOPO 4 phases found in the solid-state material, further suggesting structural disorder in the low-temperature samples evidenced from the lattice parameters and the magnetic properties.

25 ENERGY STORAGE↗

Correlating Lithium Hydroxyl Accumulation with Capacity Retention in V 2 O 5 Aerogel Cathodes

V 2 O 5 aerogels are capable of reversibly intercalating more than 5 Li + /V 2 O 5 but suffer from lifetime issues due to their poor capacity retention upon cycling. We employed a range of material characterization and electrochemical techniques along with atomic pair distribution function, X-ray photoelectron spectroscopy, and density functional theory to determine the origin of the capacity fading in V 2 O 5 aerogel cathodes. In addition to the expected vanadium redox due to intercalation, we observed LiOH species that formed upon discharge and were only partially removed after charging, resulting in an accumulation of electrochemically inactive LiOH over each cycle. Our results indicate that the tightly bound water that is necessary for maintaining the aerogel structure is also inherently responsible for the capacity fade.

36 MATERIALS SCIENCE↗

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Nickel-rich layered metal oxide LiNi 1–y–z Mn y Co z O 2 (1 – y – z ≥ 0.8) materials are the most promising cathodes for next-generation lithium-ion batteries in electric vehicles. However, they lose more than 10% of their capacity on the first cycle, and interfacial/structural instability causes capacity fading. Coating and substitution are possible direct and effective solutions to solve these challenges. In this Letter, Nb coating and Nb substitution on LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is easily produced through a scalable wet chemistry method followed by sintering from 400 to 800 °C. A Li-free Nb oxide treatment is found to remove surface impurities forming a LiNbO 3 /Li 3 NbO 4 surface coating, to reduce the first capacity loss and to improve the rate performance. Furthermore, Nb substitution stabilizes the structure, as evidenced by less heat evolution on heating, thus providing better long cycling stability with a 93.2% capacity retention after 250 cycles.

36 MATERIALS SCIENCE↗

Electrochemical Performance of Nanosized Disordered LiVOPO 4

ε-LiVOPO4 is a promising multielectron cathode material for Li-ion batteries that can accommodate two electrons per vanadium, leading to higher energy densities. However, poor electronic conductivity and low lithium ion diffusivity currently result in low rate capability and poor cycle life. To enhance the electrochemical performance of ε-LiVOPO4, in this work, we optimized its solid-state synthesis route using in situ synchrotron X-ray diffraction and applied a combination of high-energy ball-milling with electronically and ionically conductive coatings aiming to improve bulk and surface Li diffusion. We show that high-energy ball-milling, while reducing the particle size also introduces structural disorder, as evidenced by 7Li and 31P NMR and X-ray absorption spectroscopy. We also show that a combination of electronically and ionically conductive coatings helps to utilize close to theoretical capacity for ε-LiVOPO4 at C/50 (1 C = 153 mA h g–1) and to enhance rate performance and capacity retention. The optimized ε-LiVOPO4/Li3VO4/acetylene black composite yields the high cycling capacity of 250 mA h g–1 at C/5 for over 70 cycles.

36 MATERIALS SCIENCE↗