Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reaction Pathways and Energy Consumption in NH 3 Decomposition for H 2 Production by Low Temperature, Atmospheric Pressure Plasma

Pathways for NH 3 decomposition to N 2 and N 2 H 4 by atmospheric pressure nonthermal plasma are analyzed using a combination of molecular beam mass spectrometry measurements and zero-dimensional kinetic modeling. Experimental measurements show that NH 3 conversion and selectivity towards N 2 formation scale monotonically with the specific energy input into the plasma with ~ 100% selectivity to N 2 formation achieved at specific energy inputs above 0.12 J cm −3 (3.1 eV (molecule NH 3 ) −1 ). The kinetic model recovers these trends, although it underpredicts N 2 selectivity at low specific energy input. These discrepancies can be explained by the underestimation of reaction rate coefficients for reactions that consume N 2 H x species in collisions with H radicals and/or radial nonuniformities in power deposition, gas temperature, and species concentrations that are not represented by the plug flow approximation used in the model. The kinetic model shows that N 2 formation proceeds through N 2 H x decomposition pathways rather than NH x decomposition pathways in low temperature, atmospheric pressure plasma. Higher selectivity toward N 2 production can be achieved by operating at higher NH 3 conversion and with a higher gas temperature. Furthermore, the high energy cost of NH 3 decomposition by atmospheric pressure nonthermal plasma found in this work (25–50 eV (molecule NH 3 converted) −1 ; 17–33 eV (molecule H 2 formed) −1 ) is a result of the energy requirement for electron-impact dissociation of NH 3 and the significant re-formation of NH 3 by three-body recombination reactions between NH 2 and H.

Nonthermal plasma↗
DOE OSTI2017

Laser-Generated Ultra-High-Energy Density Plasma for Fast Neutron Pulse Production and Neutron Diagnostic Development, LAO-04-15, Year 3 of 3

Presentation describes project to impact deuterated nanowire arrays with intense femtosecond laser pulses to generate a hot, dense plasma in which deuterium nuclei fuse, resulting in a unique combination of high flux in an extremely short pulse with relatively modest hardware and power requirements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Effect of water vapor on plasma morphology, OH and H 2 O 2 production in He and Ar atmospheric pressure dielectric barrier discharges

Although atmospheric pressure dielectric barrier discharges (DBDs) have a long history, the effects of water vapor on the discharge morphology and kinetics have not been studied intensively. We report a simultaneous investigation of discharge morphology, OH and H 2 O 2 production in Ar and He DBDs operated at different water vapor concentrations and powers. The combined study allows us to assess the impact of the discharge morphology and power on the concentration dependence of the OH and H 2 O 2 production. The morphology of the discharge is investigated by ICCD images and current–voltage waveforms. These diagnostics are complemented by broadband absorption and a colorimetric method to measure the gas temperature and the OH and H 2 O 2 concentrations. The number of filaments in Ar DBD increases with increasing water concentration and power. The surface discharge part of the micro-discharge also reduces with increasing water concentration most likely due to a change in surface conductivity of the dielectric with changing water concentration. The OH density in the case of Ar is approximately double the OH density in He for similar power and water admixture. In contrast to the root square dependence of the OH density on the water concentration in He similar to diffuse RF discharges, the OH density in Ar increases for small water concentrations followed by a saturation and reduces for higher water concentrations. Furthermore, this dependence of OH density on water concentration is found to correlate with changes in discharge morphology. An analytical balance of the production and destruction mechanism of H 2 O 2 is shown to be able to reproduce the ratio of the measured OH and H 2 O 2 density for realistic values of electron densities.

42 ENGINEERING↗
DOE OSTI2020

Pulsed power accelerator surface Joule heating models

Understanding the effects of contaminant plasmas generated within the Z machine at Sandia is critical to understanding current loss mechanisms. The plasmas are generated at the accelerator electrode surfaces and include desorbed species found in the surface and substrate of the walls. These desorbed species can become ionized. The timing and location of contaminant species desorbed from the wall surface depend non-linearly on the local surface temperature. For accurate modeling, it is necessary to utilize wall heating models to estimate the amount and timing of material desorption. One of these heating mechanisms is Joule heating. In this paper, we propose several extended semi-analytic magnetic diffusion heating models for computing surface Joule heating and demonstrate their effects for several representative current histories. We quantitatively assess under what circumstances these extensions to classical formulas may provide a validatable improvement to the understanding of contaminant desorption timing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Transport physics dependence of Bohm speed in presheath–sheath transition

We report the ion exit flow speed at the sheath entrance is constrained by the Bohm criterion, which is used as a boundary condition for simulations that do not resolve the sheath region. Traditional Bohm criterion analysis invokes the equation of state and, thus, ignores transport physics in the sheath transition problem. An expression for the Bohm speed away from the asymptotic limit is derived from a set of anisotropic plasma transport equations. The thermal force, collisional temperature isotropization, and heat flux enter into the evaluation of the Bohm speed. By comparison with kinetic simulation results, this expression is shown to be accurate in the presheath–sheath transition region rather than a single point at the sheath entrance over a broad range of collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Shifting and Splitting of Resonance Lines due to Dynamical Friction in Plasmas

We report a quasilinear plasma transport theory that incorporates Fokker-Planck dynamical friction (drag) and pitch angle scattering is self-consistently derived from first principles for an isolated, marginally unstable mode resonating with an energetic minority species. It is found that drag fundamentally changes the structure of the wave-particle resonance, breaking its symmetry and leading to the shifting and splitting of resonance lines. In contrast, scattering broadens the resonance in a symmetric fashion. Comparison with fully nonlinear simulations shows that the proposed quasilinear system preserves the exact instability saturation amplitude and the corresponding particle redistribution of the fully nonlinear theory. Even in situations in which drag leads to a relatively small resonance shift, it still underpins major changes in the redistribution of resonant particles. This novel influence of drag is equally important in plasmas and gravitational systems. In fusion plasmas, the effects are especially pronounced for fast-ion-driven instabilities in tokamaks with low aspect ratio or negative triangularity, as evidenced by past observations. The same theory directly maps to the resonant dynamics of the rotating galactic bar and massive bodies in its orbit, providing new techniques for analyzing galactic dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Study of Triple Ar Gas Puff Z-Pinches on 0.9-MA, 200-ns COBRA

Ar gas puff z-pinch experiments were conducted on the 0.9 MA, 200 ns COBRA generator at Cornell University. In the experiments, a triple-nozzle gas valve was used to produce the zpinch load with concentric outer and inner gas puffs and a central gas jet. We used Planer Laser Induced Fluorescence (PLIF) to measure the initial gas profile of the load, two 4-frame 4-ns gated XUV cameras to image the imploding plasma, and filtered Photo- Conducting Diamond Detectors (PCDs) to measure the x-ray output. We have observed shock heating and/or photoionization of the dense center jet by the imploding plasma. With an outer to inner plenum pressure ratio of 1:3, de-acceleration of the imploding plasma occurred when the outer plasma shell imploded on the inner shell resulting in a stable implosion. By varying the plenum pressure for the center jet, the x-ray emission was optimized. In conclusion, an Ar K-shell x-ray (3-4 keV) yield of 77±17 J was produced at a current level of 0.87±0.2 MA and an implosion time of 200-ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

Argon/UF6 plasma experiments: UF6 regeneration and product analysis

An experimental and analytical investigation was conducted to aid in developing some of the technology necessary for designing a self-critical fissioning uranium plasma core reactors (PCR). This technology is applicable to gaseous uranium hexafluoride nuclear-pumped laser systems. The principal equipment used included 1.2 MW RF induction heater, a d.c. plasma torch, a uranium tetrafluoride feeder system, and batch-type fluorine/UF6 regeneration systems. Overall objectives were to continue to develop and test materials and handling techniques suitable for use with high-temperature, high-pressure, gaseous UF6; and to continue development of complementary diagnostic instrumentation and measurement techniques to characterize the effluent exhaust gases and residue deposited on the test chamber and exhaust system components. Specific objectives include: a development of a batch-type UF6 regeneration system employing pure high-temperature fluorine; development of a ruggedized time-of-flight mass spectrometer and associated data acquisition system capable of making on-line concentration measurements of the volatile effluent exhaust gas species in a high RF environment and corrosive environment of UF6 and related halide compounds.

Roman, W. C.↗
NASA NTRS1974

Isolated cold plasma regions: Observations and their relation to possible production mechanisms

Regions of enhanced cold plasma, isolated from the main plasmasphere along the Explorer 45 orbit on the equatorial plane, are reported using the sheath induced potentials seen by the electric field experiment. The occurrence of these regions has a strong correlation with negative enhancements of Dst, and their locations are primarily in the noon-dusk quadrant. The data support the concept that changes in large scale convection play a dominant role in the formation of these regions. Plasmatails that are predicted from enhancements of large scale convection electric fields in general define where these regions may be found. More localized processes are necessary to account for the exact configuration and structure seen in these regions and may eventually result in detachment from the main plasmasphere.

Maynard, N. C.↗
NASA NTRS1975

Isolated cold plasma regions - Observations and their relation to possible production mechanisms

Regions of enhanced cold plasma, isolated from the main plasmasphere along the Explorer 45 (53-A) orbit in the equatorial plane, have been detected by using the sheath-induced potentials seen by the electric field experiment. The occurrence of these regions has a strong correlation with negative enhancements of Dst, and their locations are primarily in the noon-dusk quadrant. The data support the concept that changes in large-scale convection play a dominant role in the formation of these regions. Plasma tails that are predicted from enhancements of large-scale convection electric fields in general define where these regions may be found. More localized processes are necessary to account for the exact configuration and structure seen in these regions and may eventually result in detachment from the main plasmasphere.

Maynard, N. C.↗
DOE OSTI2019

Opacity of shock-heated boron plasmas

Standard measures of opacity, the imaginary part of the atomic scattering factor f 2 and the x-ray mass attenuation coefficient μ/ρ, are assessed in shock-heated boron, boron carbide and boron nitride plasmas. The Hugoniot equation, relating the temperature T behind a shock wave to the compression ratio ρ/ρ 0 across the shock front, is used in connection with the plasma equation of state to determine the pressure p, effective plasma charge Z* and the K-shell occupation in terms of ρ/ρ 0 . Solutions of the Hugoniot equation (determined within the framework of the generalized Thomas–Fermi theory) show that the K-shell occupation in low-Z ions decreases rapidly from 2 to 0.1 as the temperature increases from 20 eV to 500 eV; a temperature range in which the shock compression ratio is near 4. The average-atom model (a quantum mechanical version of the generalized Thomas–Fermi theory) is used to determine K-shell and continuum wave functions and the photoionization cross section for x-rays in the energy range ω = 1 eV to 10 keV, where the opacity is dominated by the atomic photoionization process. For an uncompressed boron plasma at T = 10 eV, where the K-shell is filled, the average-atom cross section, the atomic scattering factor and the mass attenuation coefficient are all shown to agree closely with previous (cold matter) tabulations [1, 2, 3]. For shock-compressed plasmas, the dependence of μ/ρ on temperature can be approximated by scaling previously tabulated cold-matter values by the relative K-shell occupation; yet, there is a relatively small residual dependence arising from the photoionization cross section. Attenuation coefficients μ for a 9 keV x-ray are given as functions of T along the Hugoniot for B, C, B 4 C and BN plasmas.

52.25.Os: Emission↗
DOE OSTI2015

Negative ion production in the RF multiaperture surface-plasma source

The experiments on negative hydrogen ion beam production in a multi-aperture long-pulse surface-plasma source are described. H- ions are produced on the surface of a plasma grid covered by cesium and illuminated by fast plasma particles. The source uses a radio-frequency driver to generate plasma. A composite magnet system made of external permanent magnets confines and filters electrons in the plasma region, and deflects them in the extraction area. A multiaperture, multi-electrode ion optical system is used for beam formation. The electrode heating and cooling during long pulses is accomplished by circulating a heat transfer fluid through channels drilled in the electrodes bodies. H- ions extraction through a single aperture and 21 apertures was performed and studied. A stable H- beam with the current up to 0.7 A, energy up to 74 kV, and pulse duration up to 7 s was routinely obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Digitally manufactured air plasma-on-water reactor for nitrate production

The sustainable production of food to support the increasing world population is one of humanity’s most pressing challenges. Plasma activated water, produced using renewable energy, can help fulfill plants’ needs in sustainable agriculture approaches. The design, implementation, and characterization of a digitally manufactured air plasma-on-water reactor (POWR) for the synthesis of nitrate as green nitrogen fertilizer is presented. The interaction of air plasma-generated reactive oxygen and nitrogen species with water produces nitrate (NO 3 - ) and related species, which are the main nitrogen-containing nutrients for plants. The mild conditions of the operation of the POWR opens the possibility to use plastics, particularly through digital manufacturing strategies such as 3D-printing, for its fabrication. A pin-to-plate reactor configuration powered by high-voltage alternating power is chosen due to its simplicity and efficacy. A computational thermal-fluid model is used to evaluate the design and attain expected operational characteristics. The experimental characterization of the POWR encompassed design and operation parameters, namely electrode-water spacing, air flow rate, and voltage level. A machine learning approach is implemented to extract and quantify characteristic features of the plasma–water interaction, such plasma volume and plasma–water interface area. Experimental results revealed that the nitrate production rate varies linearly with dimensionless plasma volume. The design, fabrication, and characterization methods presented can be adapted to other POWRs and help enable on-demand nitrogen fertilizer production at low environmental and economic cost.

Physics↗