Search NASA⌕ Search

SEARCH · Search NASA

Results for “POWER FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Thermoelectric Properties of Nanocrystalline Silicon Films Prepared by Hot-Wire and Plasma-Enhanced Chemical-Vapor Depositions

We report thermoelectric measurements over a temperature range of 80 K to 300 K of heavily boron-doped nanocrystalline silicon films prepared by hot-wire and plasma-enhanced chemical-vapor depositions. The nanocrystalline silicon films were doped by either gaseous deposition precursors or post-deposition ion implantation, resulting in boron concentrations ranging from 1 -2 x 10 20 cm -3 to 3 x 10 21 cm -3 . Reasonable values of the Seebeck coefficient and electrical conductivity were obtained at 300 K, comparable to many other research work. We also report thermal conductivity measurements on these films before doping, which we use to estimate their prospective thermoelectric efficiency. These measurements show values as low as 0.76 W/mK at 300 K which depend highly upon the grain sizes of the nc-Si films. We find that post-deposition doping by ion-implantation is more effective at enhancing the power factor than gaseous doping, and the power factor is only weakly dependent upon doping concentration for the films doped by ion implantation. We conclude that improvements of the thermoelectric efficiency of nc -Si films may depend more on a reduction of their thermal conductivity than doping optimization. The small grain sizes and the low thermal conductivity of the undoped nc -Si films accomplished in this work are therefore encouraging developments.

14 SOLAR ENERGY↗

Next-to-leading power endpoint factorization and resummation for off-diagonal “gluon” thrust

The lack of convergence of the convolution integrals appearing in next-to-leading-power (NLP) factorization theorems prevents the applications of existing methods to resum power-suppressed large logarithmic corrections in collider physics. We consider thrust distribution in the two-jet region for the flavour-nonsinglet off-diagonal contribution, where a gluon-initiated jet recoils against a quark-antiquark pair, which is power-suppressed. With the help of operatorial endpoint factorization conditions, we obtain a factorization formula, where the individual terms are free from endpoint divergences in convolutions and can be expressed in terms of renormalized hard, soft and collinear functions in four dimensions. This allows us to perform the first resummation of the endpoint-divergent SCETI observables at the leading logarithmic accuracy using exclusively renormalization-group methods. The presented approach relies on universal properties of the soft and collinear limits and may serve as a paradigm for the systematic NLP resummation for other 1 → 2 and 2 → 1 collider physics processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic and thermoelectric analysis of phases in the In 2 O 3 (ZnO) k system

The high-temperature electrical conductivity and thermopower of several compounds in the In 2 O 3 (ZnO) k system (k = 3, 5, 7, and 9) were measured, and the band structures of the k = 1, 2, and 3 structures were predicted based on first-principles calculations. These phases exhibit highly dispersed conduction bands consistent with transparent conducting oxide behavior. Jonker plots (Seebeck coefficient vs. natural logarithm of conductivity) were used to obtain the product of the density of states and mobility for these phases, which were related to the maximum achievable power factor (thermopower squared times conductivity) for each phase by Ioffe analysis (maximum power factor vs. Jonker plot intercept). With the exception of the k = 9 phase, all other phases were found to have maximum predicted power factors comparable to other thermoelectric oxides if suitably doped.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New insights on the synthesis and electronic transport in bulk polycrystalline Pr-doped SrTiO{sub 3−δ}

Recently, we have reported a significant enhancement in the electronic and thermoelectric properties of bulk polycrystalline SrTiO{sub 3} ceramics via praseodymium doping. This improvement was originated from the simultaneous enhancement in the thermoelectric power factor and reduction in thermal conductivity, which was contributed to the non-uniform distribution of Pr dopants. In order to further understand the underlying mechanism, we herein investigate the role of praseodymium doping source (Pr{sub 2}O{sub 3} versus Pr{sub 6}O{sub 11}) on the synthesis and electronic transport in Pr-doped SrTiO{sub 3} ceramics. It was observed that the high-temperature electronic transport properties are independent of the choice of praseodymium doping source for samples prepared following our synthesis strategy. Theoretical calculations were also performed in order to estimate the maximum achievable power factor and the corresponding optimal carrier concentration. The result suggests the possibility of further improvement of the power factor. This study should shed some light on the superior electronic transport in bulk polycrystalline Pr-doped SrTiO{sub 3} ceramics and provide new insight on further improvement of the thermoelectric power factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical and thermal properties of Fe substituted double-filled Ba{sub x}Yb{sub y}Fe{sub z}Co{sub 4-z}Sb{sub 12} skutterudites

Fe-substituted double-filled Ba{sub x}Yb{sub y}Fe{sub z}Co{sub 4-z}Sb{sub 12} (x=0.1, y=0.2 and z=0.0-0.4 nominal) compounds were synthesized using a melting-annealing-spark plasma sintering (SPS) method. Their thermoelectric properties were assessed by measuring the Seebeck coefficient, electrical conductivity, thermal conductivity and the Hall coefficient. The sign of the Hall coefficient indicates that electrons are the dominant carriers in all compounds except Ba{sub 0.1}Yb{sub 0.2}Fe{sub 0.4}Co{sub 3.6}Sb{sub 12}. The temperature dependence of the electrical conductivity and the carrier concentration reflect the transition from extrinsic to intrinsic behavior depending on the amount of Fe substituted for Co. Jonker and Ioffe analyses are applied to Fe-substituted double-filled Ba{sub x}Yb{sub y}Fe{sub z}Co{sub 4-z}Sb{sub 12} compounds in order to evaluate the range of minimum and maximum power factors achievable in n-type filled skutterudite compounds at room temperature (300 K). The predicted maximum room temperature power factor values in the range of 15-45 {mu}W/K{sup 2} cm are comparable to experimentally reported values of n-type skutterudite compounds. - Graphical abstract: Room temperature Jonker plot of Ba{sub x}Yb{sub y}Fe{sub z}Co{sub 4-z}Sb{sub 12} samples. Highlights: Black-Right-Pointing-Pointer The TE properties of Ba{sub x}Yb{sub y}Fe{sub z}Co{sub 4-z}Sb{sub 12} compounds were investigated. Black-Right-Pointing-Pointer Jonker and Ioffe analysis applied in order to predict the range of power factor achievable at room temperature. Black-Right-Pointing-Pointer The thermal conductivity is strongly suppressed with increasing of Fe substitution on Co site. Black-Right-Pointing-Pointer We see that small quantities of Fe on Co site is beneficial on enhancement ZT value.

36 MATERIALS SCIENCE↗

Permanent Magnet Synchronous Motors for Commercial Refrigeration (Final Report)

This report provides background information on various fractional-horsepower electric motor technologies used for evaporator fan applications in commercial refrigeration and summarizes data from a DOE-sponsored evaporator fan motor laboratory and field demonstration project. This report also extrapolates that data to project the potential economic and environmental benefits resulting from upgrading the current installed base of commercial refrigeration evaporator fan motors to permanent magnet synchronous (PMS) motors.Evaporator fan motors used in commercial refrigeration applications are fractional horsepower in size, responsible for moving air across the evaporator coil, and typically run at one speed. Historically, shaded-pole induction motors have been the most commonly used evaporator fan motors in commercial refrigeration equipment and beverage vending machines. These are the simplest and least expensive type of fractional-horsepower motor, with an efficiency of approximately 20%. Electronically commutated (EC) permanent magnet motors, also known as brushless DC motors, were initially commercialized in the late 1980s, and their use in commercial refrigeration applications has increased within the last 10 to 15 years because of economic incentives and regulatory requirements. State-of-the-art EC motors are approximately 66% efficient. Another induction motor type, the permanent split capacitor (PSC) motor, offers a mid-point between shaded-pole and EC motor price and efficiency levels. PSC motors are typically about 29% efficient.A permanent magnet synchronous (PMS) AC motor that can directly use grid-supplied AC current without the need to rectify to DC has recently been commercialized. This new motor exhibits a peak efficiency of 75% and has the potential to significantly reduce the energy consumption of evaporator fan motors in commercial refrigeration equipment. Laboratory evaluation of evaporator fan motor technologies was performed to quantify and compare the performance of shaded-pole, PSC, EC, and PMS evaporator fan motors in a controlled environment, so as to minimize the influence of external factors and anomalies. The laboratory evaluation included dynamometer testing of the fan motors and airflow testing of the motor/fan assemblies. It was found that the 6–12 W PMS motor exhibited a peak efficiency of 75% with a power factor of approximately 0.9 at a power output of 11 W. It was also found that a 38–50 W PMS motor exhibited a peak efficiency of 82% with a power factor of approximately 0.9 at a power output of 35 W.Airflow testing of shaded-pole, PSC, EC, and PMS motor/fan assemblies was performed using an airflow test chamber, which was designed in accordance with ANSI/AMCA Standard 210-16/ASHRAE Standard 51-16, to measure the performance of the subject motor/fan assembly and to determine the incumbent display case system impedance (AMCA 2016). A family of fan curves (static pressure vs airflow rate and electrical power input vs airflow rate) was generated for the 6–12 W PMS motor/fan assemblies with 8-inch fan blades pitched from 17 to 32 degrees. A similar set of curves was generated for the 38–50 W motors paired with 10 and 12-inch blades. Various incumbent motor/fan assemblies were also tested in the laboratory airflow test chamber and their fan curves were generated.Field evaluation of refrigerated display case evaporator fan motors was accomplished by performing side-by-side comparisons of 6–12 W PMS motors to 6–12 W shaded-pole and EC evaporator fan motors. It was found that, on average, a PMS motor consumes 79% less power and draws 82% less current than a shaded pole motor, and on average, 34% less power and 49% less current than an EC motor. In addition, the PMS motor exhibits an average power factor of approximately 0.82, which is on average 40% greater than that of existing evaporator fan motors.Two field test sites were selected to evaluate the performance of the larger 38 to 50 W PMS evaporator fan motors in walk-in cooler/freezer applications. At each supermarket, two walk-in units were selected for investigation: one walk-in dairy cooler and one walk-in freezer. A 61% decrease in fan motor power was measured when retrofitting existing evaporator fan motors with PMS motors in the walk-in cooler. In addition, a 48% decrease in fan motor power was measured when retrofitting existing evaporator fan motors with PMS motors in the walk-in freezer.The culmination of the field evaluation of fan motor technologies was a whole-store retrofit conducted at a supermarket. Pre- and post-retrofit measurement of evaporator fan motor power in medium- and low-temperature refrigerated display cases and walk-in coolers/freezers was performed. Overall for the whole-store retrofit, the current supplied to all monitored evaporator fan motors was reduced by 52%, the real power was reduced by 46% and the apparent power was reduced by 51% following the retrofit of the 262 evaporator fan motors that w

42 ENGINEERING↗

Thermoelectric properties optimization of Fe{sub 2}VGa by tuning electronic density of states via titanium doping

We report the correlation between thermoelectric properties and electronic band structure of thermoelectric Heusler alloy Fe{sub 2}V{sub 1-x}Ti{sub x}Ga by comparing experimental measurements with theoretical calculations. The electrical resistivity data show that the semiconducting-like behavior of pure Fe{sub 2}VGa is transformed to a more metallic-like behavior at x = 0.1. Meanwhile, an enhancement of the Seebeck coefficient was observed for all Ti doped specimens at elevated temperatures with a peak value of 57 μV/K for x = 0.05 at 300 K. The experimental results can be elucidated by the calculated band structure, i.e., a gradual shifting of the Fermi level from the middle of the pseudogap to the region of valence bands. With optimized doping, the thermoelectric power factor can be significantly enhanced to 3.95 mW m{sup −1} K{sup −2} at room temperature, which is comparable to the power factors of Bi{sub 2}Te{sub 3}-based compounds. The synergy of thermal conductivity reduction due to the alloying effect and the significant increase of the thermoelectric power factor leads to higher order zT values than that of prime Fe{sub 2}VGa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical and experimental investigations of the thermoelectric properties of Bi{sub 2}S{sub 3}

Electronic and transport properties of Bi{sub 2}S{sub 3} with various dopants are studied using density functional theory and experimental characterizations. First, principle calculations of thermoelectric properties are used to evaluate the thermoelectric potential of the orthorhombic Bi{sub 2}S{sub 3} structure. The computational screening of extrinsic defects is used to select the most favorable n-type dopants. Among all the dopants considered, hafnium and chlorine are identified as prospective dopants, whereas, e.g., germanium is found to be unfavorable. This is confirmed by experiment. Seebeck coefficient (S) and electrical conductivity (σ) measurements are performed at room temperature on pellets obtained by spark plasma sintering. An increase of power factors (S{sup 2}·σ) from around 50 up to 500 μW K{sup −2} m{sup −1} is observed for differently doped compounds. In several series of samples, we observed an optimum of power factor above 500 μW K{sup −2} m{sup −1} at room temperature for a chlorine equivalence of 0.25 mol. % BiCl{sub 3}. The obtained results are plotted on a semilogarithmic log (σ) versus S graph to demonstrate that a very strong linear trend that limits the power factor around 500 μW K{sup −2} m{sup −1} exists. Further improvement of Bi{sub 2}S{sub 3} as thermoelectric material will require finding new doping modes that will break through the observed trend. The results of stability tests demonstrate that properties of optimally doped Bi{sub 2}S{sub 3} are stable.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Integration Study of Converter-Interfaced Combined Heat and Power Plants

Combined Heat and Power (CHP) systems, as a proven technology, provide numerous benefits to the plant owner by saving electricity bill, reducing carbon dioxide emissions, and improving electricity service reliability. However, their integration into the distribution grid faces many barriers including the complexity of grid code requirements and the lack of technical expertise in commercial and small industrial plants to interface with the utility and accelerate the interconnection process. To solve these issues, this study proposes a converter-interfaced solution for CHP integration. Simulations including various fault scenarios and load flow under different grid conditions are carried out to compare technical performances of the proposed solution with directly-coupled CHP. Results show that the generator size of converter-interfaced CHP can be reduced by approximately 25% and it also provides advantageous features such as reduced stress level under fault conditions and a better dynamic stability margin. In addition, a power factor controller is designed and reactive power from CHP is dispatched in such a way that the CHP plant is compliant with power factor requirements from utilities under all operating conditions.

Converter, Combined heat and power, Distributed en↗

Effect of synthesis methods on the Ca{sub 3}Co{sub 4}O{sub 9} thermoelectric ceramic performances

Three different synthesis methods producing nanometric grain sizes, coprecipitation with ammonium carbonate, oxalic acid, and by attrition milling have been studied to produce Ca{sub 3}Co{sub 4}O{sub 9} ceramics and compared with the classical solid state route. These three processes have produced high reactive precursors and all the organic material and CaCO{sub 3}·have been decomposed in a single thermal treatment. Coprecipitation leads to pure Ca{sub 3}Co{sub 4}O{sub 9} phase, while attrition milling and classical solid state produce small amounts of Ca{sub 3}Co{sub 2}O{sub 6} secondary phase. Power factor values are similar for all three samples, being slightly lower for the ones produced by attrition milling. These values are much higher than the obtained in samples prepared by the classical solid state method, used as reference. The maximum power factor values determined at 800 °C (∼0.43 mW/K{sup 2} m) are slightly higher than the best reported values obtained in textured ones which also show much higher density values. - Graphical abstract: Impressive raise of PF in Ca{sub 3}Co{sub 4}O{sub 9} thermoelectric materials obtained from nanometric grains. - Highlights: • Ca{sub 3}Co{sub 4}O{sub 9} has been produced by four different methods. • Precursors particle sizes influences on the final performances. • Coprecipitation methods produce single Ca{sub 3}Co{sub 4}O{sub 9} phase. • Power factor reaches values comparable to high density textured materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of deposition pressure on the microstructure and thermoelectric properties of epitaxial ScN(001) thin films sputtered onto MgO(001) substrates

Four epitaxial ScN(001) thin films were successfully deposited on MgO(001) substrates by dc reactive magnetron sputtering at 2, 5, 10, and 20 mTorr in an Ar/N2 ambient atmosphere at 650 °C. The microstructure of the resultant films was analyzed by x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Electrical resistivity, electron mobility and concentration were measured using the room temperature Hall technique, and temperature dependent in-plain measurements of the thermoelectric properties of the ScN thin films were performed. The surface morphology and film crystallinity significantly degrade with increasing deposition pressure. The ScN thin film deposited at 20 mTorr exhibits the presence of <221> oriented secondary grains resulting in decreased electric properties and a low thermoelectric power factor of 0.5 W/m-K² at 800 K. ScN thin films grown at 5 and 10 mTorr are single crystalline, yielding the power factor of approximately 2.5 W/m-K² at 800 K. The deposition performed at 2 mTorr produces the highest quality ScN thin film with the electron mobility of 98 cm² V⁻¹ s⁻¹ and the power factor of 3.3 W/m-K² at 800 K.

36 MATERIALS SCIENCE↗

Enhancement of Thermoelectric Performance of n-Type PbSe by Cr Doping with Optimized Carrier Concentration

Ti, V, Cr, Nb, and Mo are found to be effective at increasing the Seebeck coefficient and power factor of n-type PbSe at temperatures below 600 K. It is found that the higher Seebeck coefficients and power factors are due to higher Hall mobility ≈1000 cm 2 V -1 s -1 at lower carrier concentration. A larger average ZT value (relevant for applications) can be obtained by an optimization of carrier concentration to ≈10 18 -10 19 cm -3 . Even though the highest room temperature power factor ≈3.3 × 10 -3 W m -1 K -2 is found in 1 at% Mo-doped PbSe, the highest ZT is achieved in Cr-doped PbSe. Combined with the lower thermal conductivity, ZT is improved to ≈0.4 at room temperature and peak ZTs of ≈1.0 are observed at ≈573 K for Pb 0.9925 Cr 0.0075 Se and ≈673 K for Pb 0.995 Cr 0.005 Se. Finally, the calculated device efficiency of Pb 0.995 Cr 0.005 Se is as high as ≈12.5% with cold side 300 K and hot side 873 K, higher than those of all the n-type PbSe materials reported in the literature.

36 MATERIALS SCIENCE↗

Impact of energy filtering and carrier localization on the thermoelectric properties of granular semiconductors

Energy filtering has been widely considered as a suitable tool to increase the thermoelectric performances of several classes of materials. In its essence, energy filtering provides a way to increase the Seebeck coefficient by introducing a strongly energy-dependent scattering mechanism. Under certain conditions, however, potential barriers may lead to carrier localization, that may also affect the thermoelectric properties of a material. A model is proposed, actually showing that randomly distributed potential barriers (as those found, e.g., in polycrystalline films) may lead to the simultaneous occurrence of energy filtering and carrier localization. Localization is shown to cause a decrease of the actual carrier density that, along with the quantum tunneling of carriers, may result in an unexpected increase of the power factor with the doping level. The model is corroborated toward experimental data gathered by several authors on degenerate polycrystalline silicon and lead telluride. - Graphical abstract: In heavily doped semiconductors potential barriers may lead to both carrier energy filtering and localization. This may lead to an enhancement of the thermoelectric properties of the material, resulting in an unexpected increase of the power factor with the doping level. Highlights: Black-Right-Pointing-Pointer Potential barriers are shown to lead to carrier localization in thermoelectric materials. Black-Right-Pointing-Pointer Evidence is put forward of the formation of a mobility edge. Black-Right-Pointing-Pointer Energy filtering and localization may explain the enhancement of power factor in degenerate semiconductors.

36 MATERIALS SCIENCE↗

Converter-Interfaced CHP Plant for Improved Grid-Integration, Flexibility and Resiliency

GE Research and its partner GE Renewables have proposed the use of an interface converter solution to increase the penetration of small to medium-sized CHP (1MWe to 20MWe) into distribution grids and improve their flexibility and grid support capability. Indeed, the proposed interface converter solution thanks to presence of the grid-ready inverter, allows to streamline the compliance to grid codes requirements, reduce the interconnection delays and costs and ultimately one of the main barriers for CHP adoption by commercial and industrial facilities. An additional benefit provided by the interface converter is the use of the grid-ready inverter for reactive power which eliminates the need of sizing the generator for that capability. These two benefits highly favor the economic feasibility of converter-interfaced CHP. Five user cases, each in one of the leading U.S states for CHP potential reported by the DOE in its estimation of the U.S Technical Potential of CHP, were selected to compare the economic performances of converter-interfaced CHP as compared with directly-coupled. They include a college campus in California, a hospital in New York, a water reclamation plant in Texas, a hotel in Minnesota, and a large office building in Pennsylvania. Results showed that, the presence of the interface converter allows to increase the return on investment (ROI) by 0.5 to 2 percentage points in most of the cases (4 of 5). Indeed, the interface converter by shortening the interconnection process allows to accelerate revenues while reducing interconnection costs. Added to the reduced cost of the required generator these savings trade favorably the capital cost of the converter. The analysis also showed that the profitability of the converter-interfaced CHP is highly sensitive to the energy price, interconnection delay, and converter cost. However, it appears that if the interface converter can shorten the interconnection process by at least 6 months, adopting this solution will be more economically viable than directly-coupled configuration in almost all the +23,000 sites of the U.S Technical Potential CHP. The evaluation of the benefits of a converter-interfaced CHP also showed that it enables higher ROI when coupled with other distributed energy resources (DER) such as battery energy systems (BESS) or solar photovoltaic (PV). Indeed, in those scenario, the grid-ready inverter included in the interface converter eliminates the need of separate inverters if DC-coupling is used. On the technical performance, it has been verified that the presence of the interface converter allows to reduce by 70% to 80% the CHP short-circuit contribution to grid faults. This not only reduces the mechanical and thermal stresses exposed to the CHP electrical components but also increases the grid hosting capacity which ultimately enables higher penetrations CHP. Another key benefit of the interface converter validated with hardware-in-the-loop simulations and testing is its superior capability for reactive power support. Indeed, using a power hardware testbed with two +700kW inverters configured in back-to-back, a microgrid controller and actual facilities loads it was demonstrated that the presence of the interface converter can help maintain a power factor near ~1 or regulate the voltage to ~1.0pu at the point of common coupling. This benefit can be highly valuable if in the future, due to higher penetration of renewable distributed energy resources (DER), utilities start billing demand charge based on kVA instead of kW as currently. It was also validated that converter-interfaced CHP can dispatch heat and power commands and seamlessly switch between the two modes while consistently controlling the power factor or voltage at PCC. Indeed, the power hardware testing showed that grid-connected converter-interfaced CHP can follow either the power or heat demand while maintaining a unity power factor at converter output. This research proved that the adoption of an interface converter as the solution for interconnection of CHP system into the distribution grid can greatly improve the economic feasibility of small to medium-sized CHP as well as the plant power quality, flexibility and resiliency. Additionally, it allows increased penetrations of CHP into the distribution grid, extends their grid support capability, and facilitates the integration of BESS and PV DER by streamlining their collocation within the same facilities. This ultimately provides an opportunity for commercial and small industrial facilities in the U.S to accelerate their energy transition thanks to the high energy efficiency of CHP systems and its reliable, flexible, and resilient microgrid operation when interconnected with an interface converter.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Variations of thermoelectric properties of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} materials with different Si/Sn ratios

Mg{sub 2}Si–Mg{sub 2}Sn solid solutions are a promising class of thermoelectric materials. Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} compounds with different Si/Sn ratios were prepared by B{sub 2}O{sub 3} “flux” method followed by hot-pressing. The effect of Si/Sn ratio on the thermoelectric properties of the Mg{sub 2}Si–Mg{sub 2}Sn solid solutions at a fixed Sb doping level were measured in the temperature range 300–760 K. With the increase of Sn content (0.3≤y≤0.7), power factors are improved and lattice thermal conductivity decreased. Band convergence induced by Si/Sn ratio leads to enhanced effective mass and the materials parameter β which qualifies a kind of thermoelectric material is improved evidently. A maximum ZT of ∼1.1 at ∼760 K was achieved for the Mg{sub 2.2}Si{sub 0.3}Sn{sub 0.7–0.013}Sb{sub 0.013} sample arising from a high power factor of ∼4×10{sup -3} W m{sup −1} K{sup −2} and a low lattice thermal conductivity of ∼1.6 W m{sup −1} K{sup −1} at ∼760 K. - Graphical abstract: (a)Temperature dependence of power factor of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. (b)Temperature dependence of lattice thermal conductivity of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. (c)Temperature dependence of dimensionless figure of merit ZT of Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.13}Sb{sub 0.013} samples. - Highlights: • Mg{sub 2.2}Si{sub 1−y}Sn{sub y−0.013}Sb{sub 0.013} was prepared by B{sub 2}O{sub 3} ''flux'' method followed by hot-pressing. • Band convergence leads to enhanced m{sup ⁎} and improved materials parameter β. • ZT{sub max} of ∼1.1 at ∼760 K was achieved for the Mg{sub 2.2}Si{sub 0.3}Sn{sub 0.7−0.013}Sb{sub 0.013} sample.

36 MATERIALS SCIENCE↗

Influence of nanoinclusions on scattering of holes and phonons and transport coefficients in Bi{sub x}Sb{sub 1-x}Te{sub 3} bulk nanostructures

One of the possible ways to increase the thermoelectric figure of merit is the use of bulk nanostructured materials fabricated by melt spinning with subsequent hot pressing or spark plasma sintering. Among a variety of nanostructure types these materials contain regions of initial solid solution with nanometer sized inclusions of different compositions. In the present work the scattering of holes and phonons on nanoinclusions in such p-Bi{sub x}Sb{sub 1-x}Te{sub 3} based materials is considered. The change of transport coefficients due to this scattering mechanism is theoretically estimated. The estimations showed that the reduction of lattice thermal conductivity (about 12-13%) for nanoinclusions of Bi{sub 2}Te{sub 3}-Sb{sub 2}Te{sub 3} solid solution with different compositions is much greater than the change in power factor. Therefore the corresponding increase of the thermoelectric figure of merit for this case is determined mainly by phonon scattering. Also it is shown that the results of estimations depend on phonon spectrum approximation, e.g. in the case of sine-shaped instead of linear phonon spectrum the estimations give two times higher thermal conductivity reduction. - Graphical abstract: Relative phonon thermal conductivity {kappa}{sub ph} change (black line) due to nanoinclusion scattering versus nanoinclusion radius a, and relative thermoelectric power factor change (red line) due to nanoinclusion scattering versus chemical potential {mu} at nanoinclusion size a=1.5 nm and U{sub 0}=-0.146 eV. Highlights: Black-Right-Pointing-Pointer p-Bi{sub x}Sb{sub 1-x}Te{sub 3} solid solutions with nanosized inclusions were considered. Black-Right-Pointing-Pointer Selective hole scattering can increase power factor at high carrier concentrations. Black-Right-Pointing-Pointer Lattice thermal conductivity estimations depend on phonon spectrum approximation. Black-Right-Pointing-Pointer Phonon scattering can reduce lattice thermal conductivity by about 12-13%. Black-Right-Pointing-Pointer The latter factor mainly determines the increase of thermoelectric efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗