Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPELLER THRUST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Development of the Astrobee F sounding rocket system.

The development of the Astrobee F sounding rocket vehicle through the first flight test at NASA-Wallops Station is described. Design and development of a 15 in. diameter, dual thrust, solid propellant motor demonstrating several new technology features provided the basis for the flight vehicle. The 'F' motor test program described demonstrated the following advanced propulsion technology: tandem dual grain configuration, low burning rate HTPB case-bonded propellant, and molded plastic nozzle. The resultant motor integrated into a flight vehicle was successfully flown with extensive diagnostic instrumentation.-

Jenkins, R. B.↗
NASA NTRS1977

Propeller Study. Part 1: Introduction and Overview

A general aerodynamic-acoustic theory was developed for determining the acoustical design of propellers used on general aviation aircraft. Data from the theoretical investigation were applied in the design of a propeller whose thrust and torque were measured during a series of YO-3A aircraft flight tests.

Ormsbee, A. I.↗
NASA NTRS1978

Scaling relationships for mercury and gaseous propellant ion thrusters

A model describing the doubly charged ion densities in argon and xenon ion thrusters is presented. Doubly charged ions are shown to be produced in significant numbers from both the neutral and singly ionized states. Doubly-to-singly charged ion density ratios calculated using this model are compared to experimental values of this ratio measured in the 15 cm multipole thruster using both propellants. Agreement between theory and experiment is shown to be good. Using this doubly charged ion model, and a similar one obtained previously for mercury, together with the constant neutral loss rate theory, Child's current density law and accelerator grid fabrication limitations, a set of scaling relationships are developed. These relationships show the propellant utilizations, thrust densities and discharge power levels that can be expected as thruster diameter and/or specific impulse are increased and doubly charged ion densities are held at acceptably low values.

Wilbur, P. J.↗
NASA NTRS1980

Upper stages utilizing electric propulsion

The payload characteristics of geocentric missions which utilize electron bombardment ion thruster systems are discussed. A baseline LEO to GEO orbit transfer mission was selected to describe the payload capabilities. The impacts on payloads of both mission parameters and electric propulsion technology options were evaluated. The characteristics of the electric propulsion thrust system and the power requirements were specified in order to predict payload mass. This was completed by utilizing a previously developed methodology which provides a detailed thrust system description after the final mass on orbit, the thrusting time, and the specific impulse are specified. The impact on payloads of total mass in LEO, thrusting time, propellant type, specific impulse, and power source characteristics was evaluated.

Byers, D. C.↗
NASA NTRS1980

Orbital refill of propulsion vehicle tankage

Techniques for orbital refueling of space based vehicles were developed and experimental programs to verify these techniques were identified. Orbital refueling operations were developed for two cryogenic orbital transfer vehicles (OTV's) and an Earth storable low thrust liquid propellant vehicle. Refueling operations were performed assuming an orbiter tanker for near term missions and an orbital depot. Analyses were conducted using liquid hydrogen and N2O4. The influence of a pressurization system and acquisition device on operations was also considered. Analyses showed that vehicle refill operations will be more difficult with a cryogen than with an earth storable. The major elements of a successful refill with cryogens include tank prechill and fill. Propellant quantities expended for tank prechill appear to to insignificant. Techniques were identified to avoid loss of liquid or excessive tank pressures during refill. It was determined that refill operations will be similar whether or not an orbiter tanker or orbital depot is available. Modeling analyses were performed for prechill and fill tests to be conducted assuming the Spacelab as a test bed, and a 1/10 scale model OTV (with LN2 as a test fluid) as an experimental package.

Merino, F.↗
NASA NTRS1984

Applications of space tethers

The dynamics of orbiting tethered bodies are reviewed and several practical aplications are examined. Two tethered masses in orbit will seek a local vertical orientation and a stable equilibrium, with energy transferred to the 'upper' object. The tether tensions are provided by accelerations as low a 0.0004 g., permitting long tethers an relatively large masses at the ends. The Shuttle can send a payload into a transfer orbit by placing it at the upper end of the tether, unreeling the tether, then releasing the tether and thereby imparting the excess energy to the satellite while the Orbiter falls to a lower perigee. A 10 ton payload could be unreeled on a 148 km tether, released to a 12 n. mi. apogee, and the Orbiter would be in full deorbit. Similarly, the Orbiter can tether down to deorbit form the Space Station, boosting the Station to a higher orbit. The station can then unreel a large satellite, release it to a higher orbit, thereby returning to the stations original orbit. Unreeling a wire 10 km from the Space station and having the wire cut the earth's magnetic field lines, then closing the contact between the upward and lower ends of the wire, can, with modifications, either provide power or thrust without propellants for the Station.

Bekey, I.↗
NASA NTRS1987

Coal-Fired Rocket Engine

Brief report describes concept for coal-burning hybrid rocket engine. Proposed engine carries larger payload, burns more cleanly, and safer to manufacture and handle than conventional solid-propellant rockets. Thrust changeable in flight, and stops and starts on demand.

Anderson, Floyd A.↗
NASA NTRS1993

Effect of ground and ceiling planes on shape of energized wakes

Energized wakes expelled by devices like thrust augmentors, propellers and rotors are studied theoretically in order to explore how their shape changes as they interact with ground and ceiling planes. It is found that when the airstream is stationary and the vehicle in hover, the presence of a ceiling plane causes an energized wake to constrict even more than when in an unbounded medium. The presence of a ground plane is found to cause the wake to constrict less than in free space. The computations also show that the vortex sheets first move inward before moving downward. Along their trajectory, the vortex sheets that separate the energized fluid from the ambient fluid have a nearly constant strength and velocity which indicates that the velocity just inside the wake is approximately constant. When a velocity is given to the wind tunnel airstream, the forward edge of the wake first rises and then descends so that it spends more time in the vicinity of the actuator disk. Implications of these results on measurements obtained in wind tunnels are discussed.

Rossow, Vernon J.↗
NASA NTRS1993

Ascent abort capability for the HL-20

The HL-20 has been designed with the capability for rescue of the crew during all phases of powered ascent from on the launch pad until orbital injection. A launch-escape system, consisting of solid rocket motors located on the adapter between the HL-20 and the launch vehicle, provides the thrust that propels the HL-20 to a safe distance from a malfunctioning launch vehicle. After these launch-escape motors have burned out, the adapter is jettisoned and the HL-20 executes one of four abort modes. In three abort modes - return-to-launch-site, transatlantic-abort-landing, and abort-to-orbit - not only is the crew rescued, but the HL-20 is recovered intact. In the ocean-landing-by-parachute abort mode, which occurs in between the return-to-launch-site and the transatlantic-abort-landing modes, the crew is rescued, but the HL-20 would likely sustain damage from the ocean landing. This paper describes the launch-escape system and the four abort modes for an ascent on a Titan III launch vehicle.

Naftel, J. C.↗
NASA NTRS1929

Force measurements on airplanes

The most essential phenomena of aircraft should be classified according to their origin and then measured. Information can thus be obtained in a quicker, cheaper, and more reliable way than otherwise would be possible.

HUB DYNAMOMETERS, ETC↗
NASA NTRS1998

Preliminary In-Flight Loads Analysis of In-Line Launch Vehicles using the VLOADS 1.4 Program

To calculate structural loads of in-line launch vehicles for preliminary design, a very useful computer program is VLOADS 1.4. This software may also be used to calculate structural loads for upper stages and planetary transfer vehicles. Launch vehicle inputs such as aerodynamic coefficients, mass properties, propellants, engine thrusts, and performance data are compiled and analyzed by VLOADS to produce distributed shear loads, bending moments, axial forces, and vehicle line loads as a function of X-station along the vehicle's length. Interface loads, if any, and translational accelerations are also computed. The major strength of the software is that it enables quick turnaround analysis of structural loads for launch vehicles during the preliminary design stage of its development. This represents a significant improvement over the alternative-the time-consuming, and expensive chore of developing finite element models. VLOADS was developed as a Visual BASIC macro in a Microsoft Excel 5.0 work book on a Macintosh. VLOADS has also been implemented on a PC computer using Microsoft Excel 7.0a for Windows 95. VLOADS was developed in 1996, and the current version was released to COSMIC, NASA's Software Technology Transfer Center, in 1997. The program is a copyrighted work with all copyright vested in NASA.

Graham, J. B.↗
NASA NTRS1943

Preliminary Investigation of the Effect of Compressibility on the Maximum Lift Coefficient, Special Report

Preliminary data are presented on the variation of the maximum lift coefficient with Mach number. The data were obtained from tests in the 8-foot high-speed tunnel of three NACA 16-series airfoils of 1-foot chord. Measurements consisted primarily of pressure-distribution measurements in order to illustrate the nature of the phenomena. It was found that the maximum lift coefficient of airfoils is markedly affected by compressibility even at Mach numbers as low as 0.2. At high Mach numbers pronounced decrease of the maximum lift coefficient was found. The magnitude of the effects of compressibility on the maximum lift coefficient and the low speeds at which these effects first appear indicate clearly that consideration of the take-off thrust for propellers will give results seriously in error if these considerations are based on the usual low-speed maximum-lift-coefficient data generally used.

Stack, John↗