Search NASA⌕ Search

SEARCH · Search NASA

Results for “PYRIDINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A bioinspired cobalt catalyst based on a tripodal imidazole/pyridine platform capable of water reduction and oxidation

The prototypical drug carrier [Co II (L 1 )Cl]PF 6 (1), where L 1 is a tripodal amine bound to pyridine and methyl-imidazoles, had its electrocatalytic water splitting activity studied under different pH conditions. This species contains a high-spin 3d 7 Co II metal center, and is capable of generating both H 2 from water reduction and O 2 from water oxidation. Turnover numbers reach 390 after 3 h for water reduction. Initial water oxidation activity is molecular, with TONs of 71 at pH 7 and 103 at pH 11.5. The results reveal that species 1 can undergo several redox transformations, including reduction to the 3d 8 Co I species that precedes a LS 3d 6 hydride for water reduction, as well as nominal Co IV $=$O and Co III -OOH species required for water oxidation. Finally, post-catalytic analyses confirm the molecular nature of reduction and support initial molecular activity for oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ir(III)-Naphthoquinone complex as a platform for photocatalytic activity

Inspired by the primary events that take place in Photosystem II (PSII), we designed and synthesized a heteroleptic Ir(III) complex featuring an attached naphthoquinone (NQ) as an electron transfer (ET) auxiliary reminiscent of the plastoquinone electron acceptor in PSII. In this design, NQ is covalently attached to the 2,2'-bipyridyl (bpy) ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ], (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine). Following excitation of the photocatalyst ([Ir(dF(CF 3 )ppy) 2 (bpy-NQ)][PF 6 ]), reduced NQ (NQ •– ) was observed in transient absorption spectroscopy. Here, this novel catalyst has potential applications in oxidative and reductive photocatalytic processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Machine learning-guided discovery of polymer membranes for CO 2 separation with genetic algorithm

Designing polymer membranes with high gas permeability and selectivity is a difficult multi-task constrained problem due to the trade-off between these two properties. In this work, we present a machine learning (ML) driven genetic algorithm to tackle the design problem of polymer membranes for CO 2 separation from N 2 and O 2 . Using literature data of permeability for three gases, we constructed multiple ML models with different fingerprinting featurization schemes to predict gas permeabilities. Then, we employed a genetic algorithm to design new polymers and evaluated their performance using our ML models. We were able to identify new polymer membranes that are promising for both CO 2 /N 2 and CO 2 /O 2 separations. Further, the top discovered polymers are predicted to have high glass transition temperatures. Similarly, the pyridine functionality was found in ≈20% of the predicted polymers. This framework can be used to design polymers for any application involving constrained optimization. Finally, we outlined the challenges and opportunities with using ML guided data-driven inverse design of polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis of high-surface area tungstated zirconia by atomic layer deposition on mesoporous silica

Atomic layer deposition (ALD) was used to prepare ZrO 2 films on the surface of the mesoporous silica, SBA-15, and to modify the surface of these films with WO 3 in order to form tungstated zirconia. Adsorption-desorption isotherms, pore size distributions, and transmission electron microscopy demonstrated that the ALD synthesis produced zirconia films that were conformal to the SBA-15 pores. DRIFT spectroscopy of pyridine adsorbed on the tungstated-zirconia SBA-15 samples showed adsorbed pyridinium ions, confirming the presence of Brønsted-acid sites on this material, consistent with what has been reported for bulk tungstated zirconia. Here, the ALD-synthesized, tungstated-zirconia SBA-15 was also shown to be active in the acid-catalyzed H-D exchange between toluene and D 2 O.

Brønsted acid site↗
DOE OSTI2022

Polymer infiltration synthesis of inorganic nanoporous coatings: Does polymer template affect their properties?

Synthesis of all-inorganic metal oxide architectures using polymer templates offers control over their thickness, porosity, and composition. Here, in this study, we provide insights into the synthesis of nanoporous zinc oxide films as a model system via infiltration of polymers that have different mechanisms of interaction with metal oxide precursors such as a polymer of intrinsic microporosity (PIM-1) and representative of the block-copolymers family (polystyrene-polyvinyl pyridine block copolymer). We investigated polymer infiltration process with both gas (diethyl zinc, DEZ, and water vapors) and solution (zinc acetylacetonate, Zn(acac) 2 , dissolved in ethanol) phase precursors. Using quartz crystal microbalance (QCM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses, we systematically studied the effect of polymer template and the form of the metal oxide precursors on the properties of synthesized metal oxide thin coatings. We demonstrate that the infiltration of polymer templates can be efficiently achieved using both gas phase and solution phase precursors. We show that the crystallinity of the synthesized 200 nm ZnO films is mainly affected by the state of the precursor (gas or solution phase) and does not depend on the polymer template type. In turn, the polymer type affects the surface termination of ZnO films. We demonstrate that the surface of porous ZnO coatings synthesized with BCP (here PS-P4VP) is more accessible than the surface of ZnO synthesized with PIM; however, despite the lower surface accessibility for ethanol molecules, ZnO synthesized via infiltration of PIM-1 with solution-phase precursors demonstrates the largest change in resistivity upon its exposure to ethanol vapor at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fabrication of nanoporous doped metal oxide coatings via selective infiltration of a block copolymer template: The case of Al-doped zinc oxide

Conductive nanoporous conformal coatings are important for various applications including touchscreens, displays, and electrochromic windows, though design of such coating with controlled porosity and composition remains challenging. We propose a sequential infiltration synthesis (SIS) method for the fabrication of nanoporous conductive aluminum-doped zinc oxide (AZO) films by infiltrating block copolymer (BCP) templates, specifically polystyrene-block-polyvinyl pyridine (PS-b-P4VP), with diethyl zinc and trimethyl aluminum precursors. Tunability of both porosity and electrical conductivity is achieved by precisely controlling the swelling behavior of the polymer templates and adjusting the number of SIS cycles. Further, our results reveal that porosity levels can reach up to 80 %, with resistivity as low as ~7.83 Ωcm. Using conductive atomic force microscopy (C-AFM) and Hall effect measurements, we show that lower concentrations of aluminum doping relative to zinc (around 1: 17) results in higher conductivity of the AZO films. Additionally, AZO is based on zinc oxide (ZnO) which is cost-efficient, abundant and less toxic than commonly used transparent conductive oxides such as indium tin oxide (ITO) and fluorine-doped tin oxide (FTO). Therefore, this novel approach opens new possibilities for creating highly porous, conformal, conductive AZO coatings with customizable porosity and composition, making them ideal candidates for diverse optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A comparative analysis of different van der Waals treatments for molecular adsorption on the basal plane of 2H-MoS 2

The binding energy of hydrogen sulfide, ammonia, ethane, ethylene, butadiene, benzene, toluene, pyridine, pyrrole, and thiophene on the basal plane of the semi-conducting 2H-molybdenum sulfide (MoS 2 ) was calculated with the following flavors of Density Functional Theory (DFT): GGA-PW91, PBE-D3, vdW-DF, optPBE, optB86b, optB88, vdW-TS, and BEEF-vdW. The GGA-PW91 binding energies are negligible (<0.07 eV in magnitude) in all cases. The predictions with vdW-DF and PBE-D3 are the closest (error <0.05 eV) to the isosteric heats of adsorption calculated from reported temperature programmed desorption data for thiophene and butadiene. For all dispersion flavors examined here, the magnitude of the dispersion contribution to the binding energy increases linearly with the number of heavy atoms in the adsorbate, with each atom contributing 0.05 eV (BEEF-vdW) – 0.09 eV (optB88-vdW). Further, this implies that the calculated adsorption constants of molecules larger than acridine (i.e., comprising > 14 non-heavy atoms) can vary by more than four orders of magnitude at industrial conditions depending on the chosen method of dispersion correction. Further, dispersion effects fall off rapidly (>0.03 eV/ non-hydrogen atom/Å) as the adsorbate-surface distance increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Crystal structure of vismodegib, C 19 H 14 Cl 2 N 2 O 3 S

The crystal structure of vismodegib has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional theory techniques. Vismodegib crystallizes in space group P2 1 /a (#14) with a = 16.92070(20), b = 10.20235(4), c = 12.16161(10) Å, β = 108.6802(3)°, V = 1988.873(9) Å 3 , and Z = 4. The crystal structure consists of corrugated layers of molecules parallel to the bc-plane. There is only one classical hydrogen bond in the structure, between the amide nitrogen atom and the N atom of the pyridine ring. Pairs of these hydrogen bonds link the molecules into dimers, with a graph set R2,2(14) > a > a. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Elucidating the Redox Behavior during Atomic Layer Deposition on Lithium-Ion Battery Cathode Materials

Atomic layer deposition (ALD) has emerged as a promising technology for applying ultrathin protective coatings on lithium-ion battery (LIB) cathode surfaces to improve their cycling stability. While there have been numerous reports evaluating the electrochemical performance of these surface-modified cathode materials, the chemical changes induced on the surface of the cathode materials upon ALD coating are not fully studied. This paper describes a systematic investigation to understand the interfacial changes of 12 different cathode materials upon coating with aluminum oxide (Al 2 O 3 ) using trimethyl aluminum (TMA) and H 2 O, and aluminum fluoride (AlF 3 ) using TMA and hydrogen fluoride pyridine (HFPy). Here, the surface composition of these cathode materials, which range from simple transition metal oxides (e.g. NiO and MnO) to complex multi-element cathode materials (e.g. LiNi x Mn 1-x-y Co y O 2 , NMC), was studied via X-ray photoelectron spectroscopy (XPS). The XPS measurements reveal that the transition metals in the cathode materials undergo selective oxidation/reduction depending upon the nature of the precursor, the coating, and the cathode material. The ability to chemically modify the surface of cathode materials via vapor-phase precursor adsorption will open new avenues to systematically control the interface of the cathode materials in LIBs that are not possible by conventional coating methods.

25 ENERGY STORAGE↗
DOE OSTI2026

Extraction, Characterization, and Stability Studies of Bistriazinyl-Derived Carboxylic Acids

Separation of An(III) and Ln(III) ions will benefit the recycling of used nuclear fuel (UNF). For this purpose, many ligands have been tested over the years, and several separation processes have been successfully demonstrated on the laboratory scale. Current research aims at the development of new ligands that are built only with carbon, hydrogen, oxygen, and nitrogen (CHON), as they can be incinerated completely without secondary waste production. Here, we tested a new class of water-soluble ligands, the bistriazinyl-octa-carboxylic acids. One member, in particular, 2,6-bis-[5,6-di(3,4-dicarboxyphenyl)-1,2,4- triazin-3-yl]-pyridine (BTPOA), was found to be suitable for the selective separation of Am(III) and Cm(III) ions from Ln(III) ions and may act as a CHON alternative to its sulfonated analogue (SO 3 -Ph-BTP). BTPOA exhibited good extraction results and a high selectivity for Am(III) over Eu(III) ions. This ligand’s complexation of metal ions was further studied using potentiometric spectroscopy, as well as time-resolved laser-induced spectroscopy with Cm(III) and Eu(III) in aqueous HClO 4 and HNO 3 media. Conditional stability constants of each formed species were determined. In the HClO 4 system, Cm(III) formed three species (1:1, 1:2, and 1:3) through the stepwise addition of a single BTPOA molecule. On the other hand, in HNO 3 , Cm(III) formed two 1:2 complexes and one 1:3 complex, while the stepwise formation of three species was observed for Eu(III). The stability constants are comparable to the values for SO 3 -Ph-BTP. The radiolytic behavior of BTPOA was also investigated using electron pulse irradiation measurements to determine absolute rate coefficients (k) under ambient temperature conditions for the reaction of BTPOA with typical UNF reprocessing radical radiolysis products the hydrated electron (e aq − , k = (1.60 ± 0.02) × 10 10 M −1 s −1 ), the hydrogen atom (H • , k = (2.17 ± 0.03) × 10 9 M −1 s −1 ), and hydroxyl ( • OH, k = (6.95 ± 0.06) × 10 9 M −1 s −1 ) and nitrate (NO 3 • , k = (0.37 ± 0.02) × 10 7 M −1 s−1) radicals. These rate coefficients indicate that the radiolytic longevity of BTPOA should increase with HNO 3 concentration, owing to the consumption of e aq − /H • , by nitrate anions, and the replacement of • OH by the less reactive NO 3 • .

Diaz Gomez, Laura [Forschungszentrum Juelich (Germ↗
DOE OSTI2022

Long-Lived Photoluminescence of Molecular Group 14 Compounds through Thermally Activated Delayed Fluorescence

Photoluminescent molecules exploiting the sizable spin-orbit coupling constants of main group metals and metalloids to access long-lived triplet excited states are relatively rare compared to phosphorescent transition metal complexes. Here we report the synthesis of three air- and moisture-stable group 14 compounds E( Me PDP Ph ) 2 , where E = Si, Ge, or Sn and [ Me PDP Ph] 2- is the doubly deprotonated form of 2,6-bis(5- methyl-3-phenyl-1H-pyrrol-2-yl)pyridine. In solution, all three molecules exhibit exceptionally long-lived triplet excited states with lifetimes in the millisecond range and show highly efficient photoluminescence (Φ ≤ 0.49) due to competing prompt fluorescence and thermally activated delayed fluorescence at and around room temperature. Temperature-dependent steady-state emission spectra and photoluminescent lifetime measurements provided conclusive evidence for the two distinct emission pathways. Picosecond transient absorption spectroscopy allowed further analysis of the intersystem crossing (ISC) between singlet and triplet manifolds (τ ISC = 0.25-3.1 ns) and confirmed the expected trend of increased ISC rates for the heavier elements in otherwise isostructural compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Phosphine Ligand Binding and Catalytic Activity of Group 10–14 Heterobimetallic Complexes

We report heterobimetallic complexes have attracted much interest due to their broad range of structures and reactivities as well as unique catalytic abilities. Additionally, these complexes can be utilized as single-source precursors for the synthesis of binary intermetallic compounds. An example is the family of bis(pyridine-2-thiolato)dichloro-germanium and tin complexes of group 10 metals (Pd and Pt). The reactivity of these heterobimetallic complexes is highly tunable through substitution of the group 14 element and the neutral ligand bound to the transition metal. Here, we study the binding energies of three different phosphorous-based ligands, PR 3 (R = Bu, Ph, and OPh) by density functional theory and restricted Hartree–Fock methods. The PR 3 ligand-binding energies follow the trend of PBu 3 > PPh 3 > P(OPh) 3 , in agreement with their sigma-bonding ability. These results are confirmed by ligand exchange experiments monitored with 31 P NMR spectroscopy, in which a weaker binding PR 3 ligand is replaced with a stronger one. Furthermore, we demonstrate that the heterobimetallic complexes are active catalysts in the Negishi coupling reaction, where stronger binding PR 3 ligands inhibit access to an active site at the metal center. Similar strategies could be applied to other complexes to better understand their ligand-binding energetics and predict their reactivity as both precursors and catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An Aluminum-Based Metal–Organic Cage for Cesium Capture

Metal–organic cages are a class of supramolecular structures that often require the careful selection of organic linkers and metal nodes. Of this class, few examples of metal–organic cages exist where the nodes are composed of main group metals. Herein, we have prepared an aluminum-based metal–organic cage, H 8 [Al 8 (pdc) 8 (OAc) 8 O 4 ] (Al-pdc-AA), using inexpensive and commercially available materials. The cage formation was achieved via solvothermal self-assembly of solvated aluminum and pyridine-dicarboxylic linkers in the presence of a capping agent, acetic acid. The obtained supramolecular structure was characterized by single-crystal X-ray diffraction (SCXRD), thermogravimetric analysis, and NMR spectroscopy. Based on crystal structure and computational analyses, the cage has a 3.7 Å diameter electron-rich cavity suitable for the binding of cations such as cesium (ionic radius of 1.69 Å). Here, the host–guest interactions were probed with 1 H and 133 Cs NMR spectroscopy in DMSO, where at low concentrations, Cs + binds to Al-pdc-AA in a 1:1 ratio. The binding site was identified from the crystal structure of CsH 7 [Al 8 (pdc) 8 (OAc) 8 O 4 ] (Cs + Al-pdc-AA), and a binding affinity of ~10 6 –10 7 M –1 was determined from NMR titration experiments. The Al-pdc-AA showed improved selectivity for cesium binding over alkali metal cations (Cs + > Rb + > K + >> Na + ~ Li + ). Collectively, the study reports a novel aluminum cage that can serve as a promising host for efficient and selective cesium removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Influencing Bonding Interactions of the Neptunyl (V, VI) Cations with Electron-donating and -withdrawing Groups

Neptunium makes up the largest percentage of minor actinides found in spent nuclear fuel, yet separations of this element have proven difficult due to its rich redox chemistry. Developing new reprocessing techniques should rely on understanding how to control the Np oxidation state and its interactions with different ligands. Designing new ligands for separations requires understanding how to properly tune a system toward a desired trait through functionalization. Emerging technologies for minor actinide separations focus on ligands containing carboxylate or pyridine functional groups, which are desirable due to their high degree of functionalization. So we use DFT calculations to study the interactions of carboxylate and polypyridine ligands with the neptunyl cation [Np(V/VI)O2] +/2+ . A systematic study is performed by varying the electronic properties of the carboxylate and polypyridine ligands through the inclusion of different electron-withdrawing and electron-donating R groups. We focus on how these groups can affect geometric properties, electronic structure, and bonding characterization as a function of the metal oxidation state and ligand character and discuss how these factors can play a role in neptunium ligand design principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis and Characterization of Homo- and Heteroleptic Neptunium(IV) Heteroarylalkenolate Complexes

Heteroleptic An IV (An = U, Np) chlorido-ketoenaminate complexes of the type [AnCl 2 (TFB-tBuA) 2 (THF)] (An-1 type: U-1, Np-1; TFB-tBuA = 4-(tertbutylamino)- 1,1,1-trifluorobut-3-en-2-one) and the homoleptic Np IV heteroarylalkenolate complexes [Np(PyTFP) 4 ] (Np-2, PyTFP = 1-(pyridin-2-yl)-3,3,3-trifluoroprop- 1-en-2-ol) and [Np(DMOTFP) 4 ] (Np-3, DMOTFP = 1-(4,5-dimethyloxazol- 2-yl)-3,3,3-trifluoroprop-1-en-2-ol) were synthesized and characterized (SC-XRD, NMR, Vis-NIR, MS). While their solid-state structures compare well to those of their uranium analogues, the behavior in solution showed significant differences. The binding motif of the DMOTFP ligand in complex Np-3 can change to form two different complex isomers, as seen by paramagnetic chemical shifts in NMR experiments. Furthermore, the flexibility and the influence of the steric effects at the N-side of the ligands are discussed and compared with its uranium counterpart.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Ab Initio Multiple Cloning Method for Non-Adiabatic Excited-State Molecular Dynamics in NWChem

The recently developed ab-initio multiple cloning (AIMC) approach based on the multicongurational Ehrenfest (MCE) method provides a powerful and accurate way of describing the excited-state dynamics of molecular systems. The AIMC method is a controlled approximation to non-adiabatic dynamics with a particular strength in the proper description of decoherence effects due to branching of vibrational wavepackets at a level crossing. In this work, we report a new implementation of the AIMC algorithm in the open source NWChem computational chemistry program. The framework combines linear-response time-dependent density functional theory with Ehrenfest mean-eld theory to determine the equations of motion for classical trajectories. The multi-dimensional wave function is decomposed into a superposition of Gaussian coherent states guided by Ehrenfest trajectories (i.e., MCE approach), which can clone with fully quantum mechanical amplitudes and phases. By using an efficient time-derivative based non-adiabatic coupling approach within the AIMC method, all observable are calculated on-the-y in the non-adiabatic molecular dynamics process. As a representative example, we apply our implementation to study the ultrafast photoinduced electronic and vibrational energy transfer in a pyridine molecule. The effects of the cloning procedure on electronic and vibrational coherence, relaxation and unidirectional energy transfer are discussed. This new AIMC implementation provides a high-level non-adiabatic molecular dynamics framework for simulating photoexcited dynamics in complex molecular systems and experimentally relevant ultrafast spectroscopic probes, such as nonlinear coherent optical and X-ray signals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Overset-Grid Method with Smooth Orbital Partitioning for Molecular Scattering Calculations

To solve molecular photoionization and electron scattering problems, we use an overset-grid representation of electronic continuum functions, which has an extended central spherical grid that overlaps small spherical grids (subgrids) centered on each atom of a polyatomic molecule. Here, in this work, we present an improved algorithm that smoothly partitions the total wave function between the central grid and the atomic subgrids. The smooth partitioning allows one to use approximately one-fourth the number of partial waves on the central grid compared to our previous implementation with switching functions. The resulting numerical method for treating electron scattering and photoionization of polyatomic molecules combines the accuracy and flexibility of pure numerical grid representations with the rapid convergence of hybrid combinations of atom-centered basis-set expansions and grid methods. The overset-grid representation is implemented using the complex Kohn variational principle for scattering and photoionization amplitudes. The faster convergence with respect to the number of central grid partial waves is demonstrated and accuracy is verified by comparisons with the previous implementation and with far more computationally demanding single-center numerical expansions in electron-molecule scattering and photoionization calculations on the neon dimer (Ne 2 ) system, carbon tetrafluoride (CF 4 ) molecule, and the pyridine (C 5 H 5 N) molecule in the static-exchange approximation.

Molecules↗