Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Particle size distribution of typical ceramic raw materials by laser granulometry

The principles of the method are explained and the working of the CILAS 715 laser granulometer is described. The particle size distributions of milled glazes, quartz, feldspar and china clay were determined by this instrument and by Andreasen sedimentation. The agreement was good for isometric particles, but the china clay appears finer by sedimentation, because the platelets arrange themselves horizontally during sedimentation, while in the laser granulometer preferred orientation is prevented by circulation between the sample holder and the vibrated and stirred reservoir of the slip.

Wojnarovitsne, I. H.↗
NASA NTRS1985

On the mean particle size and water content of polar mesospheric clouds

Results from the ultraviolet spectrometer experiment (UVS) aboard the Solar Mesospheric Explorer, which measures ultraviolet sunlight scattered from air molecules in the mesosphere, are reported and discussed. The UVS experiment, its observing modes, and details of the observing sequence are described. The data are compared with predictions of Mie scattering theory, assuming the size distribution is parameterized by a mean radius and a width parameter. The water ice content, mean particle radius, and column number are calculated as a function of cloud brightness, and in terms of the unknown width parameter. It is concluded that polar mesospheric cloud particles are quite small, having average volume-effective radii less than 70 mm, and that clouds differ in their optical properties mainly as a result of their mean particle size.

Thomas, G. E.↗
NASA NTRS1990

Saturn's rings through a microscope - Particle size constraints from the Voyager PPS scan

The Voyager-2 photopolarimeter PPS experiment obtained the highest resolution of any ring observation of Saturn, profiling the variation of optical depth in radial steps of about 100 meters. A detailed treatment of the PPS statistics is presented here, and it is shown how these statistics can be related to the particle size distribution. An expression for the excess noise in the scan due to large particles is obtained, and the observed noise is used to constrain the upper end of the size distribution through the rings. It is shown that the Cassini Division and the C Ring have the smallest proportion of large particles, while the A ring has the largest proportion.

Showalter, Mark R.↗
NASA NTRS2003

Blowing in the Wind: Velocities of Chondrule-Sized Particles in a Turbulent Protoplanetary Nebula - 1

Small but macroscopic particles-chondrules, higher temperature mineral inclusions, metal grains and their like-dominate the fabric of primitive meteorites. The properties of these constituents, and their relationship to the fine dust grains which surround them, suggest that they led an extended existence in a gaseous protoplanetary nebula prior to their incorporation into their parent primitive bodies. In this paper we explore in some detail the velocities acquired by such particles in a turbulent nebula. We treat velocities in inertial space (relevant to diffusion), velocities relative to the gas entrained microscopic dust (relevant to accretion of dust rims), and velocities relative to each other (relevant to collisions). We extend previous work by presenting explicit, closed-form solutions for the magnitude and size dependence of these velocities in this important particle size regime, and we compare these expressions with new numerical calculations. The magnitude and size dependence of these velocities have immediate applications to chondrule and CAI rimming by fine dust and to their diffusion in the nebula, which we explore separately.

Cuzzi, Jeffrey N.↗
NASA NTRS2003

Blowing in the Wind: I. Velocities of Chondrule-sized Particles in a Turbulent Protoplanetary Nebula

Small but macroscopic particles - chondrules, higher temperature mineral inclusions, metal grains, and their like - dominate the fabric of primitive meteorites. The properties of these constituents, and their relationship to the fine dust grains which surround them, suggest that they led an extended existence in a gaseous protoplanetary nebula prior to their incorporation into their parent primitive bodies. In this paper we explore in some detail the velocities acquired by such particles in a turbulent nebula. We treat velocities in inertial space (relevant to diffusion), velocities relative to the gas and entrained microscopic dust (relevant to accretion of dust rims), and velocities relative to each other (relevant to collisions). We extend previous work by presenting explicit, closed-form solutions for the magnitude and size dependence of these velocities in this important particle size regime, and compare these expressions with new numerical calculations. The magnitude and size dependence of these velocities have immediate applications to chondrule and CAI rimming by fine dust, and to their diffusion in the nebula, which we explore separately.

Cuzzi, Jeffrey N.↗
NASA NTRS1976

Limitations on the use of laser velocimeter signals for particle sizing

The paper discusses the complex relationship existing between the diameter of a particle, its index of refraction, and the output signal of a fringe-type laser velocimeter, and describes a special purpose laser velocimeter for aerosol sizing that determines aerosol size distributions on the basis of Farmer's (1973) relationship between visibility and particle size. In experiments with particles of known size, this relationship is in qualitative agreement with the experimentally observed results, the main differences being that (1) the visibility does not assume a minimum value of zero, as predicted, and (2) the visibility value above which there is no ambiguity in the corresponding fringe spacing is higher than that predicted.

Orloff, K. L.↗
NASA NTRS1986

Particle size reduction of Si3N4 with Si3N4 milling hardware

The grinding of Si3N4 powder using reaction bonded Si3N4 attrition, vibratory, and ball mills with Si3N4 media was examined. The rate of particle size reduction and the change in the chemical composition of the powder were determined in order to compare the grinding efficiency and the increase in impurity content resulting from mill and media wear for each technique. Attrition and vibratory milling exhibited rates of specific surface area increase that were approximately eight times that observed in ball milling. Vibratory milling introduced the greatest impurity pickup.

Herbell, T. P.↗
NASA NTRS1979

Analytical inversions in remote sensing of particle size distributions. IV - Comparison of Fymat and Box-McKellar solutions in the anomalous diffraction approximation

It is shown that the inverse analytical solutions, provided separately by Fymat and Box-McKellar, for reconstructing particle size distributions from remote spectral transmission measurements under the anomalous diffraction approximation can be derived using a cosine and a sine transform, respectively. Sufficient conditions of validity of the two formulas are established. Their comparison shows that the former solution is preferable to the latter in that it requires less a priori information (knowledge of the particle number density is not needed) and has wider applicability. For gamma-type distributions, and either a real or a complex refractive index, explicit expressions are provided for retrieving the distribution parameters; such expressions are, interestingly, proportional to the geometric area of the polydispersion.

Fymat, A. L.↗
NASA NTRS1986

Particle-size reduction of Si3N4 powder with Si3N4 milling hardware

The grinding of Si3N4 powder using reaction bonded Si3N4 attrition, vibratory, and ball mills with Si3N4 media was examined. The rate of particle size reduction and the change in the chemical composition of the powder were determined in order to compare the grinding efficiency and the increase in impurity content resulting from mill and media wear for each technique. Attrition and vibratory milling exhibited rates of specific surface area increase that were approximately eight times that observed in ball milling. Vibratory milling introduced the greatest impurity pickup.

Herbell, T. P.↗
NASA NTRS2022

Sources, Transport and Visibility Impact of Ambient Submicrometer Particle Size Distributions in an Urban Area of Central Taiwan

This study applied positive matrix factorization (PMF) to identify the sources of size-resolved submicrometer (10–1000 nm) particles and quantify their contributions to impaired visibility based on the particle number size distributions (PNSDs), aerosol light extinction (b p ), air pollutants (PM 10 , PM 2.5 , SO 2 , O 3 , and NO), and meteorological parameters (temperature, relative humidity, wind speed, wind direction, and ultraviolet index) measured hourly over an urban basin in central Taiwan between 2017 and 2021. The transport of source-specific PNSDs was evaluated with wind and back trajectory analyses. The PMF revealed six sources to the total particle number (TPN), surface (TPS), volume (TPV), and b p . Factor 1 (F1), the key contributor to TPN (35.0 %), represented nucleation (<25 nm) particles associated with fresh traffic emission and secondary new particle formation, which were transported from the west-southwest by stronger winds (>2.2 m s -1 ). F2 represented the large Aitken (50–100 nm) particles transported regionally via northerly winds, whereas F3 represented large accumulation (300–1000 nm) particles, which showed elevated concentrations under stagnant conditions (<1.1 m s −1 ). F4 represented small Aitken (25–50 nm) particles arising from the growth and transport of the nucleation particles (F1) via west-southwesterly winds. F5 represented large Aitken particles originating from combustion-related SO 2 sources and carried by west-northwesterly winds. F6 represented small accumulation (100–300 nm) particles emitted both by local sources and by the remote SO 2 sources found for F5. Overall, large accumulation particles (F3) played the greatest role in determining the TPV (66.4 %) and TPS (34.8 %), and their contribution to bp increased markedly from 17.3 % to 40.7 % as visibility decreased, indicating that TPV and TPS are better metrics than TPN for estimating b p . Furthermore, slow-moving air masses—and therefore stagnant conditions—facilitate the build-up of accumulation mode particles (F3 + F6), resulting in the poorest visibility.

source apportionment↗
NASA NTRSDate not supplied

A Study of Precipitation Mean Particle Size with the GPM Combined Radar-Radiometer Algorithm

The Global Precipitation Measurement (GPM) mission provides quantitative estimates of the mass-weighted mean diameter, Dm, a characteristic parameter of the precipitation particle size distribution (PSD). This study investigates the three-dimensional distribution of Dm retrieved by the GPM Combined Radar-Radiometer Algorithm (CORRA) using observations from GPM’s dual-frequency precipitation radar and microwave imager. We examine Dm in individual precipitation systems in different climate regimes and investigate a six-year global climatology. The vertical structure of Dm is demonstrated with cases of deep convection, frontal rain and snow, and stratocumulus light rain. The Dm values, detectable by GPM, range from appx 0.7 mm in stratocumulus precipitation to >3.5 mm in the ice layers of intense convection. Within the constraint of the 12-dBZ detectability threshold, the smallest climatological mean Dm (~ 0.8 mm) are found in the eastern oceans, and the largest values (~ 2 mm) occur above the melting levels in convection over land in summer. The standard deviation is generally < 0.45 mm below 6 km. Climate regimes are characterized with Dm annual/seasonal variations, its convective/stratiform components, and vertical variabilities (2-10 km). The US Central Plains and Argentina are associated with the largest Dm in a deep layer. Tropical Africa has larger Dm and standard deviation than Amazon. Large convective Dm occurs at high latitudes of Eurasia and North America in summer; the southern hemisphere high latitudes have shallower systems with smaller Dm. Oceanic storm tracks in both hemispheres have relatively large Dm, particularly for convective Dm in winter.

Mei Han↗
NASA NTRS2010

Particle Size and Abundance of HC3N Ice in Titan's Lower Stratosphere at High Northern Latitudes

Up to now, there has been no corroboration from Cassini CIRS of the Voyager IRIS-discovery of cyanoacetylene (HC3N) ice in Titan's thermal infrared spectrum. We report the first compelling spectral evidence from CIRS for the v6 HC3N ice feature at 506 per centimeter at latitudes 62 deg. N and 70 deg. N, from which we derive particle sizes and column abundances in Titan's lower stratosphere. We find mean particle radii of 3.0 micrometers and 2.3 micrometers for condensed HC3N at 62 deg. N and 70 deg. N, respectively, and corresponding ice phase molecular column abundances in the range 1-10 x 10(exp 16) mol per square centimeter. Only upper limits for cloud abundances can be established at latitudes of 85 deg. N, 55 deg. N, 30 deg. N, 10 deg. N, and 15 deg. S. Under the assumption that cloud tops coincide with the uppermost levels at which HC3N vapor saturates, we infer geometric thicknesses for the clouds equivalent to 10-20 km or so, with tops at 165 km and 150 km at 70 deg. N and 62 Deg. N, respectively.

Anderson, C. M.↗
DOE OSTI2026

Particle‐Size‐Dependent Lithium‐Ion Transport in PEO/LLZO Composite Electrolytes

Lithium-metal batteries with solid electrolytes can deliver higher energy density and improved safety than conventional Li-ion batteries. Among solid electrolyte candidates, polymer/ceramic composite electrolytes are attractive because they combine polymer flexibility with the high ionic conductivity of ceramics. However, whether ceramic fillers synergistically reduce polarization losses in the polymer matrix remains unclear. A central unknown is the critical polymer/ceramic interfacial resistance (Rint,crit), below which adding ceramics lowers electrolyte overpotential. Here, we present the first macroscale model framework to quantify R int,crit for composite electrolytes based on polyethylene oxide (PEO) and Ta-doped Li 7 La 3 Zr 2 O 12 (LLZO). A 1D model for DC-polarization of tri-layer cells (PEO-LiTFSI/LLZO/PEO-LiTFSI) shows that LLZO surface functionalization reduces the PEO/LLZO interfacial resistance, consistent with electrochemical impedance measurements. Extending to a 2D composite model, we show notably that Rint,crit scales linearly with LLZO particle diameter and shifts toward experimentally accessible values (e.g., 28.8 Ωcm 2 ) as particle size increases. At fixed ceramic volume fraction, larger LLZO particles reduce the number of interfacial crossings, driving more current through the ceramic phase and lowering concentration polarization. In contrast, R int,crit is largely independent of ceramic volume fraction. These results demonstrate that ceramic filler-size engineering can enable synergistic, energy-efficient transport in polymer/ceramic composite electrolytes.

25 ENERGY STORAGE↗
NASA NTRS1991

Effect of particle size of Martian dust on the degradation of photovoltaic cell performance

Glass coverglass and SiO2 covered and uncovered silicon photovoltaic (PV) cells were subjected to conditions simulating a Mars dust storm, using the Martian Surface Wind Tunnel, to assess the effect of particle size on the performance of PV cells in the Martian environment. The dust used was an artificial mineral of the approximate elemental composition of Martian soil, which was sorted into four different size ranges. Samples were tested both initially clean and initially dusted. The samples were exposed to clear and dust laden winds, wind velocities varying from 23 to 116 m/s, and attack angles from 0 to 90 deg. It was found that transmittance through the coverglass approximates the power produced by a dusty PV cell. Occultation by the dust was found to dominate the performance degradation for wind velocities below 50 m/s, whereas abrasion dominates the degradation at wind velocities above 85 m/s. Occultation is most severe at 0 deg (parallel to the wind), is less pronounced from 22.5 to 67.5 deg, and is somewhat larger at 90 deg (perpendicular to the wind). Abrasion is negligible at 0 deg, and increases to a maximum at 90 deg. Occultation is more of a problem with small particles, whereas large particles (unless they are agglomerates) cause more abrasion.

Gaier, James R.↗
DOE OSTI2025

A Novel Optical Instrument for On-Line Measurement of Particle Size Distribution—Application to Clean Coal Technologies

A flow cell is a critical measurement interface for many optical instruments. However, the flows are often sampled under harsh conditions, such as under high pressure and/or high temperature, in the presence of particles, moisture, vapors with high dew points or corrosive gases. Therefore, obtaining a high-optical-quality flow cell that does not perturb the measurement is a significant challenge. To address this challenge, we proposed a new flow cell that employs a unique laminar coaxial flow field (for the purge and sample flows). A test system was built to conduct particle size distribution (PSD) measurements with no sampling bias using a state-of-the-art analyzer (Malvern Panalytical Insitec). The results revealed that the measurement zone is well defined solely by the sample flow, and the optical windows are well protected by the purge flow, with minimal risk of any depositions from the sample flow. Using this flow cell, the Insitec can successfully measure PSD under high pressure and temperature under moist, corrosive conditions without generating any sampling bias. Importantly, we successfully applied this flow cell for on-line PSD measurement for the flue gas of a 100 kWth pressurized oxy-coal combustor operating at 15 bara.

Cheng, Mao (ORCID:0000000213273900)↗