Search NASA⌕ Search

SEARCH · Search NASA

Results for “Perchlorate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Impact of Nickel Ions on the Oxygen Reduction Reaction Kinetics of Pt and on Oxygen Diffusion through Ionomer Thin Films

The effects of dissolved nickel on the oxygen reduction reaction (ORR) kinetics and oxygen transport properties of perfluorosulfonic acid (PFSA) thin films were investigated using rotating disk electrode (RDE) measurements of ORR on a PFSA-coated platinum electrode. The electrochemical characterization in 0.1 M perchloric acid (HClO 4 ) with and without added Ni 2+ quantitatively measured the impact of ionic interactions between the Ni 2+ cations and sulfonate (SO 3 - ) anions on oxygen transport through the PFSA thin film. Cyclic voltammetry (CV) curves in deaerated electrolyte showed that Ni 2+ cations diffusing through the PFSA thin film interact with the Pt surface altering the hydrogen underpotential deposition and stripping processes and decreasing ORR kinetics. The RDE limiting current results point to reduced permeability of oxygen through PFSA-Ni 2+ compared to PFSA-H + . Furthermore, the results indicate that transition metals leached from Pt alloy catalyst may be detrimental not only to the intrinsic ORR kinetics of the PEFC cathode catalyst through loss of the ORR-enhancing transition metal, but may also inhibit the diffusion of oxygen to the catalytic sites and poison the ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational and Experimental 1H-NMR Study of Hydrated Mg-Based Minerals

Magnesium oxide (MgO) can convert to different magnesium-containing compounds depending on exposure and environmental conditions. Many MgO-based phases contain hydrated species allowing 1H-nuclear magnetic resonance (NMR) spectroscopy to be used in the characterization and quantification of proton-containing phases; however, surprisingly limited examples have been reported. Here, 1H-magic angle spinning (MAS) NMR spectra of select Mg-based minerals are presented and assigned. These experimental results are combined with computational NMR density functional theory (DFT) periodic calculations to calibrate the predicted chemical shielding results. This correlation is then used to predict the NMR shielding for a series of different MgO hydroxide, magnesium chloride hydrate, magnesium perchlorate, and magnesium cement compounds to aid in the future assignment of 1H-NMR spectra for complex Mg phases.

1H-NMR↗

The chemical arc - A spectrometric study.

IR spectrometric analysis of flames of composite rocket propellants, maintaining diffusion flames between surfaces of decomposing ammonium perchlorate and fuel source

Aimen, W. R.↗

High energy density electrochemical cell

Primary cell has an anode of lithium, a cathode containing dihaloisocyanuric acid, and a nonaqueous electrolyte comprised of a solution of lithium perchlorate in methyl formate. It produces an energy density of 213 watt hrs/lb and can achieve a high current density.

Byrne, J. J.↗

Prediction of the mechanical properties of a filled elastomer in vacuum

Constant force creep measurements were made at three stress levels on samples of an ammonium perchlorate filled butadiene-acrylic acid copolymer in vacuum and in the atmosphere (air, 50% relative humidity) at a temperature of 28 C. The creep compliance of the samples decreased as much as 50% after 14 days of vacuum exposure. Shift factors were developed which, when applied to the atmospheric compliance measurements, predicted the behavior in vacuum. The experimental results led to the following conclusions: (1) shift factors can be applied to predict compliance behavior in vacuum from measurements in air, and (2) the shift factors are independent of stress but increase in magnitude with increasing vacuum exposure.

Gregory, G. L.↗

The combustion of pure and composite propellants - The expansion and application of laminar flame theory to heterogeneous solid propellants.

Development of a combustion theory based on the laminarized solutions to the energy and flow conservation equations, which is more realistic in recognizing the nature of the heating-rate problem and in obtaining a practical solution to estimating its magnitude. A new experimental approach is used for studying the combustion behavior of pure monopropellants and composite propellants which uses a laser beam to supply additional heat feedback to a burning surface. New experimental data are presented for the laser-induced combustion rate and ignition delay of pure ammonium perchlorate. The pure monopropellant theory is generalized to include such nonadiabatic effects, and the new experimental data are in good agreement with the nonadiabatic theory.-

Hertzberg, M.↗

Flame spectra of solid propellants during unstable combustion.

The spectral and temporal details of the flames of a series of ammonium perchlorate-polyurethane propellants during both unstable and stable combustion were observed experimentally. A 400-scan per second optical spectrometer operating in the middle infrared region was used. During unstable combustion at low ratios of chamber free volume to nozzle throat area, three different frequencies were observed simultaneously. These were attributable to at least two mechanisms. During stable combustion periodic fluctuations in flame temperature and composition were also observed. Some aspects of theory of bulk mode instability were confirmed, but the assumptions of constant flame temperature and constant composition were found to be inaccurate.

Eisel, J. L.↗

Some considerations in the combustion of AP/composite propellants

Theoretical studies are presented on the time-independent and oscillatory combustion of nonmetallized AP/composite propellants. Three hypotheses are introduced: (1) The extent of propellant degradation at the vaporization step has to be specified through a scientific criterion. (2) The condensed phase degradation reaction of ammonium perchlorate to a vaporizable state is the overall rate-limiting step. (3) Gas phase combustion rate is controlled by the mixing rate of fuel and oxidizer vapors. In the treatment of oscillatory combustion, the assumption of quasi-steady fluctuations in the gas phase is used to supplement these hypotheses. In comparison with experimental data, this study predicts several of the observations including a few that remain inconsistent with theoretical results.

Kumar, R. N.↗

Some environmental considerations relating to the interaction of the solid rocket motor exhaust with the atmosphere: Predicted chemical composition of exhaust species and predicted conditions for the formation of HCl aerosol

The exhaust products of a solid rocket motor using as propellant 14% binder, 16% aluminum, and 70% (wt) ammonium perchlorate consist of hydrogen chloride, water, alumina, and other compounds. The equilibrium and some frozen compositions of the chemical species upon interaction with the atmosphere were computed. The conditions under which hydrogen chloride interacts with the water vapor in humid air to form an aerosol containing hydrochloric acid were computed for various weight ratios of air/exhaust products. These computations were also performed for the case of a combined SRM and hydrogen-oxygen rocket engine. Regimes of temperature and relative humidity where this aerosol is expected were identified. Within these regimes, the concentration of HCL in the aerosol and weight fraction of aerosol to gas phase were plotted. Hydrochloric acid aerosol formation was found to be particularly likely in cool humid weather.

Rhein, R. A.↗