Search NASA⌕ Search

SEARCH · Search NASA

Results for “Petroleum Fuels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Transcritical diffuse-interface hydrodynamics of propellants in high-pressure combustors of chemical propulsion systems

Rocket engines and high-power new generations of gas-turbine jet engines and diesel engines oftentimes involve the injection of one or more reactants at subcritical temperatures into combustor environments at high pressures, and more particularly at pressures higher than those corresponding to the critical points of the individual components of the mixture, which typically range from 13 to 50 bars for most propellants. This class of trajectories in the thermodynamic space has been traditionally referred to as transcritical. However, the fundamental understanding of fuel atomization, vaporization, mixing, and combustion processes at such high pressures remains elusive. In particular, whereas fuel sprays are relatively well characterized at normal pressures, analyses of dispersion of fuel in high-pressure combustors are hindered by the limited experimental diagnostics and theoretical formulations available. The description of the thermodynamics of hydrocarbon-fueled mixtures employed in chemical propulsion systems is complex and involves mixing-induced phenomena, including an elevation of the critical point whereby the coexistence region of the mixture extends up to pressures much larger than the critical pressures of the individual components. As a result, interfaces subject to surface-tension forces may persist in multicomponent systems despite the high pressures, and may give rise to unexpected spray-like atomization dynamics that are otherwise absent in monocomponent systems above their critical point. In this article, the current understanding of this phenomenon is reviewed within the context of propulsion systems fueled by heavy hydrocarbons. Emphasis is made on analytical descriptions at mesoscopic scales of interest for computational fluid dynamics. In particular, a set of modifications of the constitutive laws in the Navier–Stokes equations for multicomponent flows, supplemented with a high-pressure equation of state and appropriate redefinitions of the thermodynamic potentials, are introduced in this work based on an extended version of the diffuse-interface theory of van der Waals. The resulting formulation involves revisited forms of the stress tensor and transport fluxes of heat and species, and enables a description of the mesoscopic volumetric effects induced by transcritical interfaces consistently with the thermodynamic phase diagram of the mixture at high pressures. Additionally, applications of the theory are illustrated in canonical problems, including dodecane/nitrogen transcritical interfaces in non-isothermal systems. The results indicate that a transcritical interface is formed between the propellant streams that persists downstream of the injection orifice over distances of the same order as the characteristic thermal-entrance length of the fuel stream. The transcritical interface vanishes at an edge that gives rise to a fully supercritical mixing layer.

02 PETROLEUM↗

DOE Energy Frontier Research Centers Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio)

New capabilities to predict, design and control the chemistries of carbon could answer a global imperative to transition from fossil-based to sustainable transportation fuels. While the use of inexpensive hydrocarbons has been an unparalleled achievement and enabler of economic prosperity for many nations, singular dependence upon crude oil has given rise to systemic vulnerabilities in climate, energy, economic, and national security. Lignocellulosic biomass, a renewable and carbon-neutral resource, has the potential to displace an estimated annual equivalent of three billion barrels of oil in the U.S. alone (National Research Council 2009, U. S. Department of Energy, 2011). However, biomass has only one-third the energy density of crude oil (Agrawal and Singh 2009, Richard 2010) and lacks petroleum’s versatility as a feedstock for fuels and chemicals. These limitations keep biomass conversion below the efficiency level needed for strategic impact while the scientific challenge of routing carbon from one molecular context to another remains unmet. In 2009, the Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio) recognized the potential of chemical catalysis and fast pyrolysis to overcome such limitations by transforming the main components of biomass (cellulose, xylan, and lignin) from grasses and trees directly to liquid hydrocarbons and aromatic co-products. Enabled by the EFRC high-risk, high-reward approach to grand challenge science, C3Bio researchers have been key national players in disrupting the conventional paradigm of the cellulosic biorefinery into a new future of “no carbon left behind”—the full utilization of carbon from plant cell walls in energy-dense fuels (Fig. 1). We identified catalytic and fast-pyrolytic pathways that utilize cellulose, xylan and, most significantly, lignin. We developed catalytic processes that deoxygenate and transform monomers and isolated polymers into useful products and tested their use with intact biomass. We gained control of lignin synthesis within plants and initiated tailoring biomass to its end-use through the tools of plant molecular biology and genetic engineering. C3Bio breakthroughs have increased the energy density of biomass-derived substrates via catalytic and pyrolytic conversions into products such as benzoquinones, furfural and hydroxymethylfurfural, levoglucosan and levulinic acid, methoxypropylphenols and propylbenzene. Such advances in biomass conversion would not have been possible without simultaneous advances in analytical instrumentation and methodologies, and imaging technologies and applications. The legacy science developed by C3Bio enables design and control strategies for achieving a targeted product portfolio of fuel and chemical feedstocks from a diverse range of native and tailored biomass. Our research provides the knowledge base required for a bio-economy with product streams as diverse in functionality as those of the petrochemical industry. Coupling targeted computational modeling with experimentation, we achieved: (1) fundamental understanding of biopolymers and cell wall architecture assembly, (2) discovery of new chemistries that allow the development of highly selective pathways to fuels and desirable chemicals, and (3) an integrated systems-level understanding to control catalytic and pyrolytic pathways.

09 BIOMASS FUELS↗

State and Alternative Fuel Provider Fleet Program, Model Year 2023 Annual Report

The Energy Policy Act of 1992 (EPAct) was enacted in part to reduce the nation's dependence on imported petroleum. Provisions of EPAct require certain fleets to acquire alternative fuel vehicles (AFVs). The U.S. Department of Energy administers these requirements through its State and Alternative Fuel Provider Fleet Program, Federal Fleet Requirements, and Alternative Fuel Designation Authority. This report summarizes activities under the program during model year 2023.

33 ADVANCED PROPULSION SYSTEMS↗

Hydrogen Production from Polyethylene Pyrolysis

Hydrogen is anticipated to play a pivotal role in the future of clean energy and decarbonization efforts, serving as an energy storage medium, a power generation source, and a clean fuel for transportation. While most hydrogen is produced from carbonaceous fossil feedstocks like natural gas, petroleum, and coal, there is growing interest in using refuse-derived fuels such as waste plastics and municipal solid waste (MSW) as alternative feedstocks. Thermochemical processes such as pyrolysis and catalytic cracking can convert nonrecyclable plastics and organic MSW components to produce hydrogen with lower life cycle greenhouse gas emissions when coupled with CO 2 capture. Such approaches not only address waste-management challenges but also reduce methane emissions from landfills. Furthermore, waste feedstocks are low cost and can support meeting demands for hydrogen across various industries. In this work we examined production of hydrogen from high-density polyethylene (HDPE) as a model polymer using pyrolysis. Analytical studies of pyrolysis utilizing gas chromatography–mass spectrometry (GC/MS) provide insights into conversion pathways for plastic waste, potentially reducing the environmental footprint of traditional hydrogen production methods. This work generates a baseline methodology for hydrogen production from plastic pyrolysis with and without a catalyst and the necessary product distribution baseline from key single plastics. The effect of pyrolysis temperature on the conversion of HDPE was evaluated both with and without a catalyst(s), and the product distributions measured via GC/MS were identified and hydrogen formation was quantified. These results will help guide future research efforts to optimize catalysts and processes for more efficient hydrogen production and mixed plastic waste management.

Catalysts↗

Coprocessing Biomass Fast Pyrolysis and Catalytic Fast Pyrolysis Oils with Vacuum Gas Oil in Refinery Hydroprocessing

Fast pyrolysis and catalytic fast pyrolysis (CFP) have been considered to be promising approaches for converting lignocellulosic biomass into liquid bio-oils followed by upgrading to produce fuel-range hydrocarbon products. Co-processing fast pyrolysis and CFP bio-oils with petroleum feedstocks leverages the existing petroleum refining infrastructure, which reduces Capex for the overall conversion technologies for biomass to fuel and enables fast adoption of the technologies and biofuels. Here, we reported the co-processing of different woody fast pyrolysis and CFP bio-oils with petroleum vacuum gas oil (VGO) at 5-25% bio-oil blending levels over a NiMo sulfide catalyst for mild hydrocracking. The catalyst activities over ~300 hours time on stream, the product yield and properties, and the biogenic carbon content in products are provided. Co-processing of the raw fast pyrolysis bio-oil in our configuration was not successful because the instability of the bio-oil resulted in reactor plugging and bio-oil stabilization by hydrogenation enabled their stable co-processing with VGO, whereas the CFP bio-oil can be co-processed without pretreatment. Simultaneous hydrodesulfurization, hydrodeoxygenation, and hydrocracking reactions occurred during co-processing and no obvious decrease in hydrodesulfurization and hydrocracking conversion of VGO was observed, suggesting the minimal impact of co-processed bio-oils on the reaction of VGO and also the simultaneous conversion of bio-oil and VGO to produce fuel products with much-reduced S and O content. Biogenic carbon content in co-processed products calculated by yield mass balance, together with results from isotopic measurements, indicates high biogenic carbon incorporation into liquid hydrocarbon products. In conclusion, higher biogenic carbon incorporation into fuel products was observed when co-processing CFP bio-oils than the fast pyrolysis bio-oils and over 90% of carbon in CFP bio-oil was incorporated into liquid hydrocarbon products.

09 BIOMASS FUELS↗

Decarbonizing Industrial Heat and Electricity Applications Using Advanced Nuclear Energy

Idaho National Laboratory (INL) is investigating the technical pathways to assist industrial heat and electricity users to meet their decarbonization goals through integration with advanced nuclear power plants (NPPs). This project will deliver a library of process models and accompanying documents that guide specific industries in choosing potential nuclear technologies based on their needs. Considerations in providing this guidance include specific hazards from the industrial facility, heat transport requirements and associated technologies, and feasibility with site-specific demand profiles. The library of facility process models will be based on real data from industrial facilities in the United States. The industrial processes will be identified in this project based on the following: (1) operational heat characteristics that nuclear systems can provide, (2) sufficient energy requirements to merit the capital investment for nuclear plant construction, and (3) environmental benefits of replacing existing energy production with carbon-free nuclear power. Other decarbonization opportunities considered are the addition of nuclear-powered electrolysis processes or high-temperature electric heating where the thermal requirements exceed nuclear generation conditions. In addition to assessing the technical feasibility, INL is evaluating the impact of hazards introduced by the industrial facilities on the siting requirements of advanced NPPs. Site characterization of an industrial plant is essential to determine the feasibility and suitable integration methods for each industry. The assessment of siting and technical data will reveal opportunities for a single-use nuclear integration as well as integration of multiple industrial facilities with a single NPP.

02 PETROLEUM↗

Butyric Acid Production from Delignified Corn Stover Using Thermophilic Bacterial Co-Cultures

Butyric acid (BA) is a valuable platform chemical in the food and pharmaceutical industries, and it is also a potential precursor for the production of biobutanol and sustainable aviation fuels (SAFs). BA is mainly synthesized from petroleum; thus, cost-effective, and sustainable alternatives for its production are attracting the interest of several sectors. The present work proposes a solids-to-acids bioprocess to produce BA from corn stover utilizing a co-culture that consists of two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. After initial proof of concept experiments, a series of optimization studies were carried out to evaluate the process limits of this co-culture. First, the co-cultivation of both microorganisms at different inoculum sizes in deacetylated and mechanically refined corn stover (DMR) was evaluated. No significant differences were found on the solids deconstruction and carbohydrates utilization among all the treatments. In addition, BA production was similar under all conditions, ranging between 2.1 and 2.4 g/L. Next, the deconstruction, and BA production capabilities of the co-culture at increased DMR solids contents (3, 4.5, and 6% (w/v)) were tested. Although no difference was observed in the solids deconstruction and carbohydrates utilization among treatments, BA production increased concomitantly to solids loading; the maximum values observed were 2.8, 3.6, and 6.2 g/L in the 3, 4.5, and 6% treatments, respectively. In fact, BA production did not reach its absolute maximum in the 6% treatment after 160 h of fermentation. Lastly, a fed-batch experiment was performed to investigate the co-culture capabilities and possible system constraints to achieve higher BA titers. Data on substrate modifications and product formation as well as on the growth of each microorganism will be shown. Results from this work demonstrate a promising bioprocess approach for the production of BA from lignocellulosic biomass using a thermophilic bacterial co-culture.

bacteria↗

Center for direct catalytic conversion of biomass to biofuels (Final Technical Report)

Lignocellulosic biomass has only one-third the energy density of crude oil and lacks petroleum’s versatility as a feedstock for fuels and chemicals. Since 2009, the Center for direct Catalytic Conversion of Biomass to Biofuels (C3Bio) has recognized the potential of chemical catalysis and fast-pyrolysis to overcome such limitations by transforming the main components of biomass (cellulose, xylan, and lignin) from grasses and trees directly to liquid hydrocarbons and aromatic co-products. In 2014, C3Bio proposed to develop critical systems-level understanding of how biomass structural complexity at molecular, nanoscale, and mesoscale levels impacts the yields and selectivities of desired products from catalytic and pyrolytic transformations. Our long-term goal was to gain unprecedented control of effective routing of carbon: we aimed to specify both the structures within, and the reaction products from, lignocellulosic biomass. Enabled by the EFRC high-risk, high-reward approach to grand challenge science, our interdisciplinary team of plant biologists, chemists, and chemical engineers disrupted the conventional paradigm of the cellulosic biorefinery into a new future of “no carbon left behind” - the full utilization of carbon from plant cell walls in energy-dense fuels.

09 BIOMASS FUELS↗

Performance, Combustion and Emissions Evaluation of Liquid Phase Port-Injected LPG on a Single Cylinder Heavy-Duty Spark Ignited Engine

Liquefied petroleum gas (LPG), like many other alternative fuels, has witnessed increased adoption in the last decade, and its use is projected to rise as stricter emissions regulations continue to be applied. However, much of its use is limited to dual fuel applications, gaseous phase injection, light-duty passenger vehicle applications, or scenarios that require conversion from gasoline engines. Therefore, to address these limitations and discover the most efficient means of harnessing its full potential, more research is required in the development of optimized fuel injection equipment for liquid port and direct injection, along with the implementation of advanced combustion strategies that will improve its thermal efficiency to the levels of conventional fuels. This paper focuses on the development of a liquid phase port-injection system for LPG, the design of a reference piston, and the baseline evaluation of the performance, combustion, and emissions characteristics of a single cylinder research engine to establish a benchmark comparable to existing LPG engines. A sweep of start of injection (SOI) timing is performed by injecting liquid LPG at several closed and open intake valve timings, which demonstrates no significant variation in engine performance, but accounts for a 10% reduction in bsCO with the optimal SOI timing. Spark timing sweep demonstrates the 50% burn crank angle location related to maximum brake torque (MBT) point with a brake thermal efficiency (BTE) of ~34% for the tested load case. The effect of equivalence ratio is also presented with optimal SOI timing at MBT condition. The engine starts exhibiting knocking combustion at 140kPa intake manifold air pressure (IMAP) with a peak torque of 253Nm and a 5% reduction in brake specific fuel consumption compared to the naturally aspirated scenario.

Fosudo, Toluwalase↗

Parametric Vehicle Choice Modeling: ParaChoice

Assess the evolving integration potential of light-duty (LDV) and heavy-duty vehicle (HDV) technologies, fuels, and infrastructure and their contributions to lowering emissions and petroleum consumption. Leverage existing LDV and build HDV ParaChoice capability to conduct parametric analyses that explore the trade-space for key factors that influence consumer choice and technology, fuel and infrastructure development. ParaChoice provides the unique capability to examine tipping points and tradeoffs, and can help quantify the effects of and mitigate uncertainty introduced by data sources and assumptions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Recycled Paper as a Source of Renewable Jet Fuel in the United States

Converting biomass into jet fuel involves more than the core chemical process. The overall process includes the logistics of harvesting and transporting the biomass, handling and preparing the material for processing, and processing and disposal of waste. All of these activities contribute to cost. Controlling cost involves more than developing efficient process chemistry. Choice of feedstock also has a significant impact on process economics. We consider chemical conversion of paper from municipal solid waste as a feedstock for the production of jet fuel and diesel. Paper has a significantly higher cellulose content than raw lignocellulosic biomass such as corn stover, so it requires less pretreatment to convert it into hydrocarbons than lignocellulosic biomass. Our techno-economic analysis showed that the cost of converting paper waste into jet fuel is about $1.00/gal less than jet fuel produced from corn stover. Although the cost of recycling paper into jet fuel is less than producing it from corn stover, the process is not competitive with petroleum. We estimated a minimum selling price of $3.97/gal for paper-derived jet fuel. Our sensitivity studies indicated that the biggest economic obstacle is the cost of cellulose hydrolysis. Direct hydrogenation of paper to sugar alcohols combined with increased economy of scale could make recycling paper jet fuel competitive.

09 BIOMASS FUELS↗

Future Cost Benefits Analysis for Electrified Vehicles from Advances Due to U.S. Department of Energy Targets

The U.S. Department of Energy’s Vehicle Technologies Office (DOE-VTO) supports research and development (R&D), as well as deployment of efficient and sustainable transportation technologies, that will improve energy efficiency and fuel economy and enable America to use less petroleum. To accelerate the creation and adoption of new technologies, DOE-VTO has developed specific targets for a wide range of powertrain technologies (e.g., engine, battery, electric machine, lightweighting, etc.). This paper quantifies the impact of VTO R&D on vehicle energy consumption and cost compared to expected historical improvements across vehicle classes, powertrains, component technologies and timeframes. We have implemented a large scale simulation process to develop and simulate tens of thousands of vehicles on U.S. standard driving cycles using Autonomie, a vehicle simulation tool developed by Argonne National Laboratory. Results demonstrate significant additional reductions in both cost and energy consumption due to the existence of VTO R&D targets compared to predicted historical trends. It is observed that, over time, the fuel consumption of different electrified vehicles is expected to decrease by 40–50% and a reduction of 45–55% for vehicle manufacturing costs owing to significant improvements through various VTO R&D targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Development of a Genome-Scale Metabolic Model of Clostridium thermocellum and Its Applications for Integration of Multi-Omics Datasets and Computational Strain Design

Solving environmental and social challenges such as climate change requires a shift from our current non-renewable manufacturing model to a sustainable bioeconomy. To lower carbon emissions in the production of fuels and chemicals, plant biomass feedstocks can replace petroleum using microorganisms as biocatalysts. The anaerobic thermophile Clostridium thermocellum is a promising bacterium for bioconversion due to its capability to efficiently degrade lignocellulosic biomass. However, the complex metabolism of C. thermocellum is not fully understood, hindering metabolic engineering to achieve high titers, rates, and yields of targeted molecules. In this study, we developed an updated genome-scale metabolic model of C. thermocellum that accounts for recent metabolic findings, has improved prediction accuracy, and is standard-conformant to ensure easy reproducibility. We illustrated two applications of the developed model. We first formulated a multi-omics integration protocol and used it to understand redox metabolism and potential bottlenecks in biofuel (e.g., ethanol) production in C. thermocellum. Second, we used the metabolic model to design modular cells for efficient production of alcohols and esters with broad applications as flavors, fragrances, solvents, and fuels. The proposed designs not only feature intuitive push-and-pull metabolic engineering strategies, but also present novel manipulations around important central metabolic branch-points. We anticipate the developed genome-scale metabolic model will provide a useful tool for system analysis of C. thermocellum metabolism to fundamentally understand its physiology and guide metabolic engineering strategies to rapidly generate modular production strains for effective biosynthesis of biofuels and biochemicals from lignocellulosic biomass.

59 BASIC BIOLOGICAL SCIENCES↗

AFLEET: ASSESS THE IMPACTS OF CONVENTIONAL AND ALTERNATIVE FUEL VEHICLES

The Alternative Fuel Life-Cycle Environmental and Economic Transportation (AFLEET) tool, developed by researchers at Argonne National Laboratory for the U.S. Department of Energy (DOE) Clean Cities coalition network, estimates the environmental and economic costs and benefits of alternative fuel and advanced vehicles. Using simple inputs, AFLEET lets fleet managers estimate and compare petroleum use, greenhouse gas emissions (GHGs), air pollutant emissions, and cost of ownership for conventional and alternative fuel vehicles (AFVs).

Burnham, Andrew↗

Alternative Fueling Station Locations

Alternative fueling stations are located throughout the United States and Canada, and their availability continues to grow. The Alternative Fuels Data Center (AFDC) maintains a website where you can find alternative fueling stations near you or on a route, obtain counts of alternative fueling stations by state, view maps, and more. The most recent dataset available for download here provides a "snapshot" of the alternative fueling station information for compressed natural gas (CNG), ethanol (E85), propane/liquefied petroleum gas (LPG), biodiesel (B20 and above), electric vehicle charging, hydrogen, and liquefied natural gas (LNG), as of July 29, 2021.

alt fuel↗

Electric Vehicles, Biofuels, and Transitions in Transportation Energy

The decarbonization of power sources for light duty transportation is moving towards the use of renewable energies, biofuels, and electric vehicles. Currently there are three major light transportation fuels: gasoline (US gasoline is 98% E10), biofuels (E85), and electricity. Currently fuel ethanol in biofuels is obtained principally from corn in the US and sugarcane in Brazil with a small amount from cellulose. The transition to alternative fuels has been occurring since 1980, although light transportation still relies on gasoline. The rise of battery electric vehicles (BEV) is now beginning to offset internal combustion engines (ICE), while recent advances in biotechnology and integrated plant design have enhanced the economic feasibility of cellulosic biofuels. This paper explores the potential role of these fuels in reducing the carbon footprint associated with light transportation. We compare three different cases: Gasoline, E85 and full electric based on the Argonne AFLEET tool to calculate generation of greenhouse gases due to manufacturing and operation of BEV and ICE cars, respectively, in the US assuming an average useful automobile life of 200,000 miles or 12 years. We concluded that significant liquid fuel use (both renewable and non-renewable) will continue for the next 50 years. Here, renewable liquid fuels have an important role to play as the transportation sector transitions from petroleum to other energy sources.

09 BIOMASS FUELS↗

Retrospective analysis of the U.S. corn ethanol industry for 2005–2019: implications for greenhouse gas emission reductions

Since 2000, corn ethanol production in the USA has increased significantly – from 1.6 to 15 billion gallons (6.1 to 57 billion liters) – due to supportive biofuel policies. In this study, we conduct a retrospective analysis of the changes in US corn ethanol greenhouse gas emission intensity, sometimes known as carbon intensity (CI), over the 15 years from 2005 to 2019. Our analysis shows a significant decrease in CI: from 58 to 45 gCO 2 e/MJ of corn ethanol (a 23% reduction). This is due to several factors. Corn grain yield has increased continuously, reaching 168 bushels/acre (10.5 metric tons/ha, a 15% increase) while fertilizer inputs per acre have remained constant, resulting in decreased intensities of fertilizer inputs (e.g., 7% and 18% reduction in nitrogen and potash use per bushel of corn grain harvested, respectively). A 6.5% increase in ethanol yield, from 2.70 to 2.86 gal/bushel corn (0.402 to 0.427 L kg -1 corn), and a 24% reduction in ethanol plant energy use, from 32 000 to 25 000 Btu/gal ethanol (9.0 to 6.9 MJ L -1 ethanol) also helped reduce the CI. The total GHG emission reduction benefits through the reduction in the CI and increased ethanol production volume are estimated at 140 million metric tons (MMT) from 2005 to 2019 in the ethanol industry. Displacement of petroleum gasoline by corn ethanol in the transportation fuel market resulted in a total GHG emission reduction benefit of 544 MMT CO 2 e during the period 2005 to 2019.

09 BIOMASS FUELS↗