Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Growth and Morphology of Phase Separating Supercritical Fluids

The scientific objective is to study the relation between the morphology and the growth kinetics of domains during phase separation. We know from previous experiments performed near the critical point of pure fluids and binary liquids that there are two simple growth laws at late times. The 'fast' growth appears when the volumes of the phases are nearly equal and the droplet pattern is interconnected. In this case the size of the droplets grows linearly in time. The 'slow' growth appears when the pattern of droplets embedded in the majority phase is disconnected. In this case the size of the droplets increases in proportion to time to the power 1/3. The volume fraction of the minority phase is a good candidate to determine this change of behavior. All previous attempts to vary the volume fraction in a single experimental cell have failed because of the extreme experimental difficulties.

Hegseth, John↗
DOE OSTI2023

Engineering Redox Flow Battery Electrodes with Spatially Varying Porosity Using Non‐Solvent‐Induced Phase Separation

Redox flow batteries (RFBs) are a promising electrochemical platform for efficiently and reliably delivering electricity to the grid. Within the RFB, porous carbonaceous electrodes facilitate electrochemical reactions and distribute the flowing electrolyte. Tailoring electrode microstructure and surface area can improve RFB performance, lowering costs. Electrodes with spatially varying porosity may increase electrode utilization and provide surface area in reaction‐limited zones; however, the efficacy of such designs remains an open area of research. Herein, a non‐solvent‐induced phase‐separation (NIPS) technique that enables the reproducible synthesis of macrovoid‐free electrodes with well‐defined across‐thickness porosity gradients is described. The monotonically varying porosity profile is quantified and the physical properties and surface chemistries of porosity‐gradient electrodes are compared with macrovoid‐containing electrode, also synthesized by NIPS. Then, the electrochemical and fluid dynamic performance of the porosity‐gradient electrodes is evaluated, exploring the effect of changing the direction of the porosity gradient and benchmarking against the macrovoid‐containing electrode. Lastly, the performance is examined in a vanadium RFB, finding that the porosity‐gradient electrode outperforms the macrovoid electrode, is independent of gradient direction, and performs favorably compared to advanced electrodes in the contemporary literature. It is anticipated that the approach motivates further exploration of microstructurally tailored electrodes in electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2021

Self-Assembly and Phase Separation for Transport: A brief argument for the continued exploration of liquid crystal flows and electrodeposition in micro-gravity

Phase separation, interfacial tension gradients, and molecular self-assembly are all phenomena frequently observed when manipulating soft condensed matter systems on Earth. Depending on the system these processes can also be quite predictable. For instance, on Earth water droplets placed on hydrophobic surfaces will have contact angles > 90° with limited spread, contrary to their wetting behavior on hydrophilic surfaces. However, in an environment that is in a constant state of free-fall, where the gravitational field is reduced by 10%, such as on the International Space Station (ISS), buoyancy and its effect on fluid convection also become negligible. Fluid flow and phase behavior become less predictable. Thus, continuing the prior example, even if water droplets still remain in contact with a surface in microgravity (µg), the interface between the air and droplets will still remain significantly curved, appearing almost as if they were placed over completely nonwetting surfaces (Fig. 1a). Moreover, the negligible opposing buoyant force would also mean that if immiscible liquid droplets of a less dense character, or air bubbles even (Fig. 1b), were to be suspended within a larger water drop, these immiscible droplets or air bubbles would not migrate toward any one direction unless either artificially propelled by an external force or internal reaction inducing flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Molecular interactions underlying liquid-liquid phase separation of the FUS low-complexity domain

The low-complexity domain of the RNA-binding protein FUS (FUS LC) mediates liquid-liquid phase separation (LLPS), but the interactions between the repetitive SYGQ-rich sequence of FUS LC that stabilize the liquid phase are not known in detail. By combining NMR and Raman spectroscopy, mutagenesis, and molecular simulation, we demonstrate that heterogeneous interactions involving all residue types underlie LLPS of human FUS LC. Furthermore, we find no evidence that FUS LC adopts conformations with traditional secondary structure elements in the condensed phase; rather, it maintains conformational heterogeneity. We show that hydrogen bonding, π/sp 2 , and hydrophobic interactions all contribute to stabilizing LLPS of FUS LC. In addition to contributions from tyrosine residues, we find that glutamine residues also participate in contacts leading to LLPS of FUS LC. These results support a model in which FUS LC forms dynamic, multivalent interactions via multiple residue types and remains disordered in the densely packed liquid phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Phase separation at the dimer-superconductor transition in Ir 1-x Rh x Te 2

The detailed evolution of the local atomic structure across the (x, T) phase diagram of transition metal dichalcogenide superconductor Ir 1–x Rh x Te 2 (0≤x≤0.3, 10 K≤T≤300 K) is obtained from high quality x-ray diffraction data using the atomic pair distribution function (PDF) method. Observed hysteretic thermal structural phase transition from trigonal (P3¯m1) to triclinic (P1¯) dimer phase for low Rh content emphasizes intimate connection between the lattice and electronic properties. For superconducting samples away from the dimer/superconductor phase boundary structural transition is absent and the local structure remains trigonal down to 10 K. In the narrow range of compositions close to the boundary PDF analysis reveals structural phase separation, suggestive of weak first order character of the Rh-doping induced dimer-superconductor quantum phase transition. Samples from this narrow range show weak anomalies in electronic transport and magnetization, hallmarks of the dimer phase, as well as superconductivity albeit with incomplete diamagnetic screening. Furthermore, results suggest that the dimer and superconducting orders exist in the mutually exclusive spatial regions

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning

Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure−morphology models. Here, we introduce a data-driven highthroughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding endfunctional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary imageprocessing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.

ML-guided polymer design↗
DOE OSTI2019

Direct Visualization of Drug–Polymer Phase Separation in Ritonavir–Copovidone Amorphous Solid Dispersions Using in situ Synchrotron X-ray Fluorescence Imaging of Thin Films

Amorphous solid dispersions (ASDs) are new formulations currently being used in pharmaceutical industry. The ASDs, in which amorphous drug and polymeric excipients are intimately mixed at a molecular level, exhibit dramatically enhanced solubility and dissolution characteristics relative to their crystalline drug counterparts. In the process of achieving an ever-increasing drug loading (DL), it is noticed however, that the drug release profile deteriorates significantly beyond a certain DL. As an example, a ritonavir-copovidone ASD achieves continuous and full drug release when DL ≤ 25 wt%. The release drops at 30 wt% and when DL > 30 wt% there is virtually no drug release, behaving like a pure amorphous drug. In this communication, the dissolution behavior of ASD thin films has been investigated by in situ synchrotron X-ray fluorescence (XRF) imaging to elucidate the mechanism for the unique change in extent of drug release as a function of DL. It is found that the drug release profile correlates well with the amorphous-amorphous phase separation (AAPS) onset. At a lower drug loading (up to 20 wt%), it takes more than 12 hours for AAPS to happen while in sharp contrast, it only needs less than 10 minutes for DL > 30 wt%. During AAPS amorphous drug accumulates on the surface of the film which prevents further dissolution from the interior of the ASD. The current study provides a mechanistic understanding of the confounding drug release profile of ASDs as a function of DL, and opens the door for studying drug-excipient (e.g. polymer, surfactant) interactions via XRF imaging in the future.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1980

Vapors-liquid phase separator

The use of porous plugs, mostly with in the form of passive devices with constant area were considered as vapor-liquid phase separators for helium 2 storage vessels under reduced gravity. The incorporation of components with variable cross sectional area as a method of flow rate modification was also investigated. A particular device which uses a shutter-type system for area variation was designed and constructed. This system successfully permitted flor rate changes of up to plus or minus 60% from its mean value.

Frederking, T. H. K.↗
NASA NTRS1984

Sintered plug flow modulation of a vapor-liquid phase separator for a helium II vessel

Presented is a system for modulation of a superfluid (helium II) flow in a vapor-liquid phase separator, for use in cryogenic storage tanks in future space missions. The system consists of a semicircular mechanically operated shutter, downstream of the separator plug, rotated at 0.1 rpm to control the operational surface area of the separator. The mass flow rate was varied from 10 to 22 mg/s. Pressure gradients across the plug are also discussed.

Frederking, T. H. K.↗
NASA NTRS1982

Anomalous phase separation behavior of gel-derived soda-silica glasses

The effects of retained bound hydroxyl groups on amorphous immiscibility behavior and on the kinetics of phase separation were studied in glasses containing from 10 to 19 percent sodium oxide preparaed by the gel process. Differences in behavior as functions of preliminary thermal treatment of the gel precursor and of melting conditions were studied, employing IR spectroscopy, SAXS and WAXD to monitor the variation in glass microstructure. Both the initial gel treatment and the OH concentration in the prepared glasses were found to affect the immiscibility temperatures, and the magnitude of the maximum temperature increase was also a function of the sodium oxide concentration. It is suggested that the variation in thermodynamic behavior may be caused by the structural arrangement attained by the OH groups during the gel condensation process, which in turn affects the extent of hydrogen bonding to nonbridging oxygen ions.

Neilson, G. F.↗
NASA NTRS2017

Porous Plug Phase Separator and Superfluid Film Flow Suppression System for the Soft X-Ray Spectrometer Onboard Hitomi

When using superfluid helium in low gravity environments, porous plug phase separators are commonly used to vent boiloff gas while confining the bulk liquid to the tank. Invariably, there is a flow of superfluid film from the perimeter of the porous plug down the vent line. For the Soft X-ray Spectrometer onboard ASTRO-H (Hitomi), its approximately 30-liter helium supply has a lifetime requirement of more than 3 years. A nominal vent rate is estimated as ~ 30 ug/s, equivalent to ~ 0.7 mW heat load. It is therefore critical to suppress any film flow whose evaporation would not provide direct cooling of the remaining liquid helium. That is, the porous plug vent system must be designed to both minimize film flow and to ensure maximum extraction of latent heat from the film. The design goal for Hitomi is to reduce the film flow losses to <2 ug/s, corresponding to a loss of cooling capacity of <40 uW. The design adopts the same general design as implemented for Astro-E and E2, using a vent system composed of a porous plug, combined with an orifice, a heat exchanger, and knife-edge devices. In this paper, design, on-ground testing results and in-orbit performance are described.

Porous↗
DOE OSTI2025

Nanodiffraction imaging of ionically driven phase separation in cobaltite heterostructures

Controlling the anionic stoichiometry and distribution of perovskite cobaltites presents a powerful method for tailoring the magnetic and electronic properties for magneto-ionic applications. Nevertheless, the influence of nanoscale morphology, including phase separation and defects in cobaltite heterostructures, remains largely unexplored. We used x-ray nanodiffraction to directly image the nanoscale topotactic phase transformation in La 1−x Sr x CoO 3 (LSCO) heterostructures capped with a reactive aluminum (Al) layer (i.e., oxygen “getter”) of varying thicknesses (0.5, 3, and 7 nm). Nanodiffraction images reveal the formation of highly elongated BM filaments extending over mesoscopic lengths (>67 μm), indicating a strong tendency toward oxygen vacancy ordering in both P and BM phases in all heterostructures. Local strain and strain gradient analysis shows a strong correlation between the depletion of the P phase and strain gradients. Our measurements suggest that elongation of the BM filaments is the predominant mechanism for topotactic transformation in LSCO/Al heterostructures, preferred over coarsening, branching, and fractal growth. Our study provides a detailed nanoscale analysis of ionically driven phase transitions in LSCO/Al heterostructures, which is crucial for tailoring the functional properties of cobaltites for magneto-ionic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Phase separation and crystallization of complex borosilicate melts for glass-ceramic waste forms

Waste loadings of reprocessed spent nuclear fuel vitrified into borosilicate glass can be increased by precipitating environmentally stable phases concentrated with waste components in a chemically stable glass matrix. The principal objective of this study was to characterize the development of crystalline powellite (CaMoO 4 and related phases) and oxyapatite (Ca 2 LN 8 Si 6 O 26 ) in borosilicate glass-ceramics and to determine how the formation of those phases affected its chemical durability. Borosilicate glasses provided by PNNL were re-melted and quenched at rates from over 300°C/s to ~0.05°C/s. Isothermal heat treatment experiments were conducted by quenching melts in a molten tin bath at various temperatures, holding for periods of time, and then quenching in a water bath. Analytical electron microscopy and x-ray diffraction provided information about the kinetics of the phase separation and crystallization processes responsible for microstructural development. Powellite and oxyapatite crystals formed during slower quench rates and longer isothermal times, and time-temperature-transformation (TTT) diagrams were developed from the latter experiments. A hot thermocouple test (HTT) system was built to rapidly quench melts and hold them at set times to provide supplementary TTT information, but that system was not as sensitive to the phase transformations as other tests. Corrosion tests were performed to understand how the individual phases in the glass-ceramic affect its overall chemical durability. Product consistency tests, performed at Missouri S&T and at Savannah River National Lab, provided release rates of major elements from samples as a function of cooling rate, and atomic force microscopy and profilometry measurements of surface topology determined the relative corrosion rates of the residual glass and oxyapatite phases. Faster dissolution rates were measured from samples cooled more slowly and these were explained by the greater fractions of B 2 O 3 in the residual glass phase after the formation of oxyapatite and powellite. Oxyapatite was found to be more durable than the residual glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1999

Phase Separation Kinetics in Isopycnic Mixtures of H2O/CO2/Ethoxylated Alcohol Surfactants

Ternary mixtures of H2O and CO2 with ethoxylated alcohol (C(sub i)E(sub j)) surfactants form three coexisting liquid phases at conditions where two of the phases have equal densities (isopycnic phases). Isopycnic phase behavior has been observed for mixtures containing C8E5, C10E6, and C12E6 surfactants, but not for those mixtures containing either C4E1 or C8E3 surfactants. Pressure-temperature (PT) projections for this three-phase equilibrium were determined for H2O/CO2/C8E5 and H2O/CO2/C10E6 mixtures at temperatures from approximately 25 to 33 C and pressures between 90 and 350 bar. Measurements of the microstructure in H2O/CO2/C12E6 mixtures as a function of temperature (25-31 C), pressure (63.1-90.7 bar), and CO2 composition (0-3.9 wt%) have also been carried out to show that while micellar structure remains essentially un-changed, critical concentration fluctuations increase as the phase boundary and plait point are approached. In this report, we present our first measurements of the kinetics of isopycnic phase separation for ternary mixtures of H2O/CO2/C8E5.

Lesemann, Markus↗
NASA NTRS1989

Model system studies with a phase separated membrane bioreactor

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestial simulation.

Petersen, G. R.↗
NASA NTRS1980

Observations of homogeneous phase separation in liquid He3-He4 mixtures

The so-called miscibility gap that exists below the critical point in liquid He-3 - H-4 mixtures makes it possible to study binary phase composition, and the ensuing dispersions, in a system possessing an additional order parameter in one of the components. The physical behavior of a superfluid dispersion produced by pressure quenching an He-3 - He-4 mixture into the miscibility gap is described. The description applies both to quenches of homogeneous and phase-separated initial states in various regions of the miscibility gap.

Hoffer, J. K.↗
NASA NTRS2001

Normal Gravity Testing of a Microchannel Phase Separator for In Situ Resource Utilization

A microchannel separator, with 2.7 millimeters as the smallest dimension, was tested, and a pore throat structure captured and removed liquid from a gas-liquid stream. The microchannel device was tested over a of gas and liquid flow rates ranging from 0.0005 up to 0. 14 volume fraction of liquid. Four liquids were tested with air. The biggest factor affecting the throughput is the capacity of liquid flow through the pore throat, which is dictated by permeability, liquid viscosity, flow area, pore throat thickness, and pressure difference across the pore throat. Typically, complete separation of gas and liquid fractions was lost when the liquid flow rate reached about 40 to 60% of the pore throat capacity. However, this could occur over a range of 10 to 90% utilization of pore throat capacity. Breakthrough occurs in the microchannel phase separator at conditions similar to the annular to plug flow transition of two-phase microgravity pipe flow implying that operating in the proper flow regime is crucial. Analysis indicates that the Bond number did not affect performance, supporting the premise that hydrodynamic, interfacial, and capillary forces are more important than gravity. However, the relative importance of gravity is better discerned through testing under reduced gravity conditions.

TeGrotenhuis, Ward E.↗