SEARCH · Search NASA

Results for “Phoenix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Detection of Evolved Carbon Dioxide in the Rocknest Eolian Bedform by the Sample Analysis at Mars(SAM) Instrument at the Mars Curiosity Landing Site

The Sample Analysis at Mars (SAM) instrument detected four releases of carbon dioxide (CO2) that ranged from 100 to 700 C from the Rocknest eolian bedform material (Fig. 1). Candidate sources of CO2 include adsorbed CO2, carbonate(s), combusted organics that are either derived from terrestrial contamination and/or of martian origin, occluded or trapped CO2, and other sources that have yet to be determined. The Phoenix Lander s Thermal Evolved Gas Analyzer (TEGA) detected two CO2 releases (400-600, 700-840 C) [1,2]. The low temperature release was attributed to Fe- and/or Mg carbonates [1,2], per-chlorate interactions with carbonates [3], nanophase carbonates [4] and/or combusted organics [1]. The high temperature CO2 release was attributed to a calcium bearing carbonate [1,2]. No evidence of a high temperature CO2 release similar to the Phoenix material was detected in the Rocknest materials by SAM. The objectives of this work are to evaluate the temperature and total contribution of each Rocknest CO2 release and their possible sources. Four CO2 releases from the Rocknest material were detected by SAM. Potential sources of CO2 are adsorbed CO2, (peak 1) and Fe/Mg carbonates (peak 4). Only a fraction of peaks 2 and 3 (0.01 C wt.%) may be partially attributed to combustion of organic contamination. Meteoritic organics mixed in the Rocknest bedform could be present, but the peak 2 and 3 C concentration (approx.0.21 C wt. %) is likely too high to be attributed solely to meteoritic organic C. Other inorganic sources of C such as interactions of perchlorates and carbonates and sources yet to be identified will be evaluated to account for CO2 released from the thermal decomposition of Rocknest material.

Sutter, B.↗

NASA NTRS2014

Nanophase Carbonates on Mars: Implications for Carbonate Formation and Habitability

Despite having an atmosphere composed primarily of CO2 and evidence for abundant water in the past, carbonate minerals have only been discovered in small amounts in martian dust [1], in outcrops of very limited extent [2, 3], in soils in the Northern Plains (the landing site of the 2007 Phoenix Mars Scout Mission) [4] and may have recently been detected in aeolian material and drilled and powdered sedimentary rock in Gale Crater (the Mars Science Laboratory [MSL] landing site) [5]. Thermal analysis of martian soils by instruments on Phoenix and MSL has demonstrated a release of CO2 at temperatures as low as 250-300 degC, much lower than the traditional decomposition temperatures of calcium or magnesium carbonates. Thermal decomposition temperature can depend on a number of factors such as instrument pressure and ramp rate, and sample particle size [6]. However, if the CO2 released at low temperatures is from carbonates, small particle size is the only effect that could have such a large impact on decomposition temperature, implying the presence of extremely fine-grained (i.e., "nanophase" or clay-sized) carbonates. We hypothesize that this lower temperature release is the signature of small particle-sized (clay-sized) carbonates formed by the weathering of primary minerals in dust or soils through interactions with atmospheric water and carbon dioxide and that this process may persist under current martian conditions. Preliminary work has shown that clay-sized carbonate grains can decompose at much lower temperatures than previously thought. The first work took carbonate, decomposed it to CaO, then flowed CO2 over these samples held at temperatures >100 degC to reform carbonates. Thermal analysis confirmed that carbonates were indeed formed and transmission electron microsopy was used to determine crystal sized were on the order of 10 nm. The next step used minerals such as diopside and wollastonite that were sealed in a glass tube with a CO2 and H2O source. After reacting these materials for a number of hours, thermal analysis demonstrated the formations of carbonates that decomposed at temperatures as low as 500 degC [7]. Further work is underway to carry out the weathering process under more Mars-like conditions (low pressure and low temperature) to determine if the carbonate decomposition temperature can be shifted to even lower temperatures, consistent with what has been detected by thermal analysis instruments on Mars.

Archer, P. Douglas, Jr.↗

NASA NTRS2014

Searching for Reduced Carbon on the Surface of Mars: The SAM Combustion Experiment

The search for reduced carbon has been a major focus of past and present missions to Mars. Thermal evolved gas analysis was used by the Viking and Phoenix landers and is currently in use by the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) to characterize volatiles evolved from solid samples, including those associated with reduced organic species. SAM has the additional capability to perform a combustion experiment, in which a sample of Mars regolith is heated in the presence of oxygen and the composition of the evolved gases is measured using quadrupole mass spectrometry (QMS) and tunable laser spectrometry (TLS) [1]. Organics detection on the Martian surface has been complicated by oxidation and destruction during heating by soil oxidants [2], including oxychlorine compounds, and terrestrial organics in the SAM background contributed by one of the SAM wet chemistry reagents MTBSTFA (N-Methyl-N-tertbutyldimethylsilyl- trifluoroacetamide) [3,4]. Thermal Evolved Gas Analysis (TEGA) results from Phoenix show a mid temperature CO2 release between 400 C - 680 C speculated to be carbonate, CO2 adsorbed to grains, or combustion of organics by soil oxidants [5]. Low temperature CO2 evolutions (approx. 200 C - 400 C) were also present at all three sites in Gale Crater where SAM Evolved Gas Analysis (EGA) was performed, and potential sources include combustion of terrestrial organics from SAM, as well as combustion and/or decarboxylation either indigenous martian or exogenous organic carbon [4,6]. By performing an experiment to intentionally combust all reduced materials in the sample, we hope to compare the bulk abundance of CO2 and other oxidized species evolved by combustion to that evolved during an EGA experiment to estimate how much CO2 could be contributed by reduced carbon sources. In addition, C, O, and H isotopic compositions of CO2 and H2O measured by TLS can contribute information regarding the potential sources of these volatiles.

Stern, J. C.↗

NASA NTRS2014

Nanophase Carbonates on Mars: Formation, Detection, and Implications

Despite having an atmosphere composed primarily of CO2 and evidence for abundant water in the past, carbonate minerals have only been discovered on Mars in small amounts in martian dust, in soils in the Northern Plains, and in outcrops of limited spatial extent. Recently, carbonates have been identified as the possible source of CO2 released during thermal analysis of material from an aeolian deposit named Rocknest and drilled sample from the sheepbed mudstone, both samples analyzed by the Mars Science Laboratory (MSL) in Gale Crater. Both the Phoenix lander and MSL carry thermal analysis instruments, the Thermal and Evolved Gas Analyzer (TEGA) on Phoenix and the Sample Analysis at Mars (SAM) instrument on MSL. While thermal analysis does not provide definitive mineralogy, it can detect volatile-bearing minerals present at very low abundance and the temperature profiles of evolved gases can reveal physical properties of the sample. For example, the decomposition temperature of volatilebearing minerals depends heavily on the particle size of the mineral.

Archer, P. D.↗

NASA NTRS2013

Character of Mg(ClO4)2 Brines Under Mars Regolith Conditions

Elsewhere, we report on our investigation of the initiation and growth of ice lenses under Mars like conditions. In that work, we assume that the soil-water-ice system is gas and solute free. We conclude that initiation of lens initiation - the unloading of particle-particle contacts by thermomolecular forces at a given soil horizon - may be a common process in the shallow Martian regolith, and that the dominant property controlling the rate of lens growth is the freezing point depression (Delta-T(sub f)) associated with the interfacial forces of the soil. Lens growth is thus favored in clay-sized soils over silt soils due to the greater Delta-T(sub f), but segregated ice was observed at the Phoenix site, where soils were predominantly siltsized.. Perchlorate salts were also observed at the Phoenix site, and will strongly affect some of the properties associated with potential ice lens growth, over and above increases to Delta-T(sub f),. Here, we investigate the nature of Mg(ClO4)2 brines under Mars-like conditions, with particular emphasis on those aspects that might influence the in situ segregation of residual liquids during phase change, potentially leading to the formation of subsurface excess ice. We also discuss cyclic variations in the water activity (a(sub w)) that might affect the habitability of solutions in the shallow regolith.

soil-water-ice system↗

NASA NTRS2014

Complete Decoding and Reporting of Aviation Routine Weather Reports (METARs)

Aviation Routine Weather Report (METAR) provides surface weather information at and around observation stations, including airport terminals. These weather observations are used by pilots for flight planning and by air traffic service providers for managing departure and arrival flights. The METARs are also an important source of weather data for Air Traffic Management (ATM) analysts and researchers at NASA and elsewhere. These researchers use METAR to correlate severe weather events with local or national air traffic actions that restrict air traffic, as one example. A METAR is made up of multiple groups of coded text, each with a specific standard coding format. These groups of coded text are located in two sections of a report: Body and Remarks. The coded text groups in a U.S. METAR are intended to follow the coding standards set by National Oceanic and Atmospheric Administration (NOAA). However, manual data entry and edits made by a human report observer may result in coded text elements that do not follow the standards, especially in the Remarks section. And contrary to the standards, some significant weather observations are noted only in the Remarks section and not in the Body section of the reports. While human readers can infer the intended meaning of non-standard coding of weather conditions, doing so with a computer program is far more challenging. However such programmatic pre-processing is necessary to enable efficient and faster database query when researchers need to perform any significant historical weather analysis. Therefore, to support such analysis, a computer algorithm was developed to identify groups of coded text anywhere in a report and to perform subsequent decoding in software. The algorithm considers common deviations from the standards and data entry mistakes made by observers. The implemented software code was tested to decode 12 million reports and the decoding process was able to completely interpret 99.93 of the reports. This document presents the deviations from the standards and the decoding algorithm. Storing all decoded data in a database allows users to quickly query a large amount of data and to perform data mining on the data. Users can specify complex query criteria not only on date or airport but also on weather condition. This document also describes the design of a database schema for storing the decoded data, and a Data Warehouse web application that allows users to perform reporting and analysis on the decoded data. Finally, this document presents a case study correlating dust storms reported in METARs from the Phoenix International airport with Ground Stops issued by Air Route Traffic Control Centers (ATCSCC). Blowing widespread dust is one of the weather conditions when dust storm occurs. By querying the database, 294 METARs were found to report blowing widespread dust at the Phoenix airport and 41 of them reported such condition only in the Remarks section of the reports. When METAR is a data source for an ATM research, it is important to include weather conditions not only from the Body section but also from the Remarks section of METARs.

METAR Decoder/Parser↗

NASA NTRS2015

The Investigation of Perchlorate/Iron Phase Mixtures as A Possible Source of Oxygen Detected by the Sample Analysis at Mars (SAM) Instrument in Gale Crater, Mars

The Sample Analysis at Mars (SAM) instrument onboard the Curiosity rover detected O2 and HCl gas releases from the Rocknest (RN) eolian bedform and the John Klein (JK) and Cumberland (CB) drill hole materials in Gale Crater. Chlorinated hydrocarbons have also been detected by the SAM quadrupole mass spectrometer (QMS) and gas chromatography/mass spectrometer (GCMS). These detections along with the detection of perchlorate (ClO4-) by the Mars Phoenix Lander's Wet Chemistry Laboratory (WCL) suggesting perchlorate is a possible candidate for evolved O2 and chlorine species. Laboratory thermal analysis of individual per-chlorates has yet to provide an unequivocal temperature match to the SAM O2 and HCl release data. These detections along with the detection of perchlorate (ClO4-) by the Mars Phoenix Lander's Wet Chemistry Laboratory suggested perchlorate is a possible candidate for evolved O2 and chlorine species. Laboratory thermal analysis of pure perchlorates has yet to provide an unequivocal temperature match to the SAM O2 and HCl release data. Analog laboratory analysis of iron mineralogy detected in Gale materials that was physically mixed with Ca- and Mg-perchlorate has been shown to catalyze lower O2 release temperatures and approach some SAM O2 release data. Instead of physical mixtures used in previous work, the work presented here utilized perchlorate solutions added to Fe phases. This technique allowed for perchlorate to come in closer contact with the Fe-phase and may more closely mimic Mars conditions where humidity can increase enough to cause deliquescence of the highly hygroscopic perchlorate phases. The objective of this work is to: 1) Utilize a laboratory SAM analog instrument to evaluate the O2 release temperatures from Mg- and Ca-perchlorates solutions applied to Fephases detetected in Gale Crate; and 2) Determine if perchlorate solutions can provide improved matches with the SAM O2 temperature release profiles.

Sutter, B.↗

NASA NTRS2020

InSight Aerothermal Environment Assessment

The InSight spacecraft was proposed to be a build-to-print copy of the Phoenix vehicle due to the knowledge that the lander payload would be similar and the trajectory would be similar. However, the InSight aerothermal analysts, based on tests performed in CO2 during the Mars Science Laboratory mission (MSL) and completion of Russian databases, considered radiative heat flux to the aftbody from the wake for the first time for a US Mars mission. The combined convective and radiative heat flux was used to determine if the as-flown Phoenix thermal protection system (TPS) design would be sufficient for InSight. All analyses showed that the design would be adequate. Once the InSight lander was successfully delivered to Mars on November 26, 2018, work began to reconstruct the atmosphere and trajectory in order to evaluate the aerothermal environments that were actually encountered by the spacecraft and to compare them to the design environments.The best estimated trajectory (BET) reconstructed for the InSight atmospheric entry fell between the two trajectories considered for the design, when looking at the velocity versus altitude values. The maximum heat rate design trajectory (MHR) flew at a higher velocity and the maximum heat load design trajectory (MHL) flew at a lower velocity than the BET. For TPS sizing, the MHL trajectory drove the design. Reconstruction has shown that the BET flew for a shorter time than either of the design environments, hence total heat load on the vehicle should have been less than used in design. Utilizing the BET, both DPLR and LAURA were first run to analyze the convective heating on the vehicle with no angle of attack. Both codes were run with axisymmetric, laminar flow in radiative equilibrium and vibrational non-equilibrium with a surface emissivity of 0.8. Eight species Mitcheltree chemistry was assumed with CO2, CO, N2, O2, NO, C, N, and O. Both codes agreed within 1% on the forebody and had the expected differences on the aftbody. The NEQAIR and HARA codes were used to analyze the radiative heating on the vehicle using full spherical ray-tracing. The codes agreed within 5% on most aftbody points of interest.The LAURA code was then used to evaluate the conditions at angle of attack at the peak heating and peak pressure times. Boundary layer properties were investigated to confirm that the flow over the forebody was laminar for the flight.Comparisons of the aerothermal heating determined for the reconstructed trajectory to the design trajectories showed that the as-flown conditions were less severe than design

Beck, Robin↗

NASA NTRS2019

InSight's Reconstructed Aerothermal Environments

radiation↗

NASA NTRSDate not supplied

Aerodynamic Performance of the 2018 InSight Mars Lander

InSight touched down in Elysium Planitia on 26 November 2018, becoming NASA’s eighth successful entry, descent, and landing (EDL) at Mars. InSight was a build-to-print of the successful 2008 Phoenix EDL system, flying a non-spinning, ballistic trajectory with a 70-degree sphere-cone aeroshell (2.65-meter diameter), disk-gap-band parachute, and pulsed terminal descent and landing engines. This work discusses entry aerodynamic performance for InSight up to parachute deployment, including pre-flight aerodynamics predictions and comparisons with post-flight reconstruction, as well as comparisons with the Phoenix reconstruction.

Ashley M Korzun↗

NASA NTRS2016

Measurements of Oxychlorine species on Mars

Mars landed and orbiter missions have instrumentation capable of detecting oxychlorine phases (e.g. perchlorate, chlorate) on the surface. Perchlorate (~0.6 wt%) was first detected by the Wet Chemistry Laboratory in the surface material at the Phoenix Mars Landing site. Subsequent analyses by the Thermal Evolved Gas Analyser aboard the same lander detected an oxygen release (~465°C) consistent with the thermal decomposition of perchlorate. Recent thermal analysis by the Mars Science Laboratory’s Sample Analysis at Mars instrument has also indicated the presence of oxychlorine phases (up to 1.2 wt%) in Gale Crater materials. Despite being at detectable concentrations, the Chemistry and Mineralogy (CheMin) X-ray diffractometer has not detected oxychlorine phases. This suggests that Gale Crater oxychlorine may exist as poorly crystalline phases or that perchlorate/chlorate mixtures exist, so that individual oxychlorine concentrations are below CheMin detection limits (~1 wt%). Although not initially designed to detect oxychlorine phases, reinterpretation of Viking Gas Chromatography/Mass Spectrometer data also suggest that oxychlorine phases are present in the Viking surface materials. Remote near-infrared spectral analyses by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) instrument indicate that at least some martian recurring slope lineae (RSL) have spectral signatures consistent with the presence of hydrated perchlorates or chlorates during the seasons when RSL are most extensive. Despite the thermal emission spectrometer, Thermal Emission Imaging System, Observatoire pour la Minéralogie, l’Eau, les Glaces et l’Activité and CRISM detection of hundreds of anhydrous chloride (~10–25 vol%) deposits, expected associated oxychlorine phases (>5–10 vol%) have not been detected. Total Cl and oxychlorine data sets from the Phoenix Lander and the Mars Science Laboratory missions could be used to develop oxychlorine versus total Cl correlations, which may constrain oxychlorine concentrations at other locations on Mars by using total Cl determined by other missions (e.g. Viking, Pathfinder, MER and Odyssey). Development of microfluidic or ‘lab-on-a-chip’ instrumentation has the potential to be the next generation analytical capability used to identify and quantify individual oxychlorine species on future landed robotic missions to Mars.

Perchlorate↗

NASA NTRSDate not supplied

Building Capacity for Policy-makers in a Virtual Setting: Providing Tools to Analyze Wildfire Smoke Plumes and Their Impacts

The NASA DEVELOP Program conducted 10-week long feasibility projects in a remote work setting, including partnering with The Nature Conservancy’s Washington Chapter and the Puget Sound Clean Air Agency to investigate wildfire smoke from 2000 - 2020 in the Pacific Northwest using satellite-derived data. The team engaged with platforms for collaboration both internally with NASA affiliates and externally with community organizations. Working from multiple states, the team members used a variety of software including Google Meet, Microsoft Teams, and Google Earth Engine to foster communication and work with data in a shared virtual environment. Throughout the project, the team learned that executing the project in a distanced work setting made it easier to reach out to scientists across the country for expertise and guidance. To study changes in air quality resulting from wildfire smoke, the team utilized data from NASA’s Fire Information from Resource Management System (FIRMS) and the ESA’s Sentinel-5 TROPOspheric Monitoring Instrument (TROPOMI). The team created a Google Earth Engine web-based tool, “Plume Hazards and Observations of Emissions by Navigating an Interactive eXplorer” (PHOENIX), to visualize changes in pollutants and aerosol optical depth after fire events. The potential relationship between plume height and fire radiative power was evaluated by using NASA’s Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Aqua and Terra satellites and NASA’s Multi-angle Imaging SpectroRadiometer (MISR) aboard Terra with the MISR INteractive eXplorer (MINX). The PHOENIX smoke assessment tool and science communication infographics will be shared electronically with the partner organizations. Furthermore, the team introduced the partners to MINX and will provide a tailored tutorial that included a recorded video and a written component with a live virtual workshop. These resources build capacity for further research and education on wildfire smoke and air quality within communities.

NASA DEVELOP↗

NASA NTRS2021

Nighttime Convection in Water-ice Clouds at High Northern Latitudes on Mars

We investigate water-ice clouds and their influence on the temperature structure of the Mar-tian atmosphere at high northern latitudes in early summer. New results are obtained throughcoordinated analysis of two types of data from Mars Global Surveyor: atmospheric profiles re-trieved from radio occultation (RO) measurements and wide-angle images from the Mars OrbiterCamera (MOC). Some RO profiles contain a layer of neutral static stability, which indicates thepresence of convective mixing at a local time (about 5 h) when it does not usually occur. Thesenocturnal mixed layers (NMLs) were observed frequently in early summer of Mars year 27 atlatitudes of 53–72◦N and longitudes of 210–330◦E. The base of a typical NML is 3 km abovethe surface, about the same height as the nighttime cloud layer detected by the Phoenix LIDARin early summer of Mars year 29 at 234◦E, 68◦N. The depth of the NMLs ranges from less than1 km to more than 5 km. Comparisons with nearly simultaneous MOC images demonstrate thatNMLs are closely associated with water-ice clouds. There is a dense cluster of NMLs within theannular cloud that appears every year in early summer between Alba Mons and the north polarresidual ice cap. The lighting conditions at this location and season allowed MOC to observe theannular cloud on most orbits, at 118-min intervals. Its appearance varies dramatically with localtime, becoming more symmetrical and better organized at night and dissipating to a crescentshape during the day. According to high-resolution numerical simulations (Spiga et al., 2017),including a large-eddy simulation at the Phoenix landing site, NMLs form when radiative cool-ing by water-ice aerosols causes convective instability; the mixed layer is forced from above bynegative buoyancy. Our results strongly support this conclusion. In addition, MOC images frommidsummer contain eastward-moving frontal clouds. Temperature profiles within these cloudsshow signs of near-surface advection of warm air, which reduces the static stability of the loweratmosphere and contributes, along with cloud radiation, to the formation of an NML.

David Hinson↗

NASA NTRS2022

Accurate Modeling of Lyα Profiles and their Impact on Photolysis of Terrestrial Planet Atmospheres

Accurately measuring and modeling the Lyα (Lyα; λ1215.67 Å) emission line from low-mass stars is vital for our ability to build predictive high energy stellar spectra, yet interstellar medium (ISM) absorption of this line typically prevents model-measurement comparisons. Lyα also controls the photodissociation of important molecules, like water and methane, in exoplanet atmospheres such that any photochemical models assessing potential biosignatures or atmospheric abundances require accurate Lyα host star flux estimates. Recent observations of three early M and K stars (K3, M0, M1) with exceptionally high radial velocities (>100 km s −1 ) reveal the intrinsic profiles of these types of stars as most of their Lyα flux is shifted away from the geocoronal line core and contamination from the ISM. These observations indicate that previous stellar spectra computed with the PHOENIX atmosphere code have underpredicted the core of Lyα in these types of stars. With these observations, we have been able to better understand the microphysics in the upper atmosphere and improve the predictive capabilities of the PHOENIX atmosphere code. Since these wavelengths drive the photolysis of key molecular species, we also present results analyzing the impact of the resulting changes to the synthetic stellar spectra on observable chemistry in terrestrial planet atmospheres.

Sarah Peacock↗

NASA NTRSDate not supplied

Investigating the Applications of In-Situ Resource Utilization for Future Crewed Mars Missions

There are significant gaps in knowledge regarding the water ice on Mars and future preparation for human missions. So far, six rovers have traversed Mars’ rocky surface, aiming to understand the planet’s composition and search for signs of life. A rover mission set to explore the high northern latitudes of Mars with the goal of analyzing ice cores could greatly advance scientific knowledge to better understand Mars’s ancient climate and geochemistry. As of now, little has been accomplished in the exploration of colder regions and the extraction of water ice apart from the Phoenix lander and the Viking 2 mission; however, the science potential of the Phoenix and Viking landers was limited due to their inability to explore terrain like rovers. The exploration of the near-polar region Arcadia Planitia and its water ice deposits could reveal signs of past microbial life through preserved biosignatures. Additionally, to prepare for permanent human habitation on Mars, this proposed rover could continue the characterization of Mars’s current land and mineral composition, and search for materials that future humans may need on Mars (such as water for habitation, basalt for construction, and olivine for manufacturing purposes). This would increase understanding of the potential for in-situ resource utilization (ISRU) on Mars. The use of ISRU will reduce the amount of material needed on the initial flight, and similarly will reduce fuel costs. The mission to Arcadia Planitia incorporates the use of various mineral-extracting and imaging instruments (Martian Ice Core Analyzer, ground-penetrating radar, NavCam, Mars Environmental Dynamics Analyzer, SuperCam, etc.) to collect data from water ice and geologic samples. A near-polar rover mission to Mars would illuminate Mars’ past and present, while learning more about martian resources to benefit human explorers in the future.

Annika Sachdeva↗

NASA NTRS2008

Under the Radar: Trials and Tribulations of Landing on Mars

The Mars Phoenix Mission requires a ground-sensing radar altimeter/ velocimeter to meet touchdown velocity requirements During Phase C/D, the radar underwent a testing triptych: a) Aerial Testing, both captive carry and tethered drop tests (36 sorties, approx. 80 hrs). b) Testing with Electronic Ground Support Equipment (EGSE) on the bench (500+ hrs). c) Detailed Simulation including both RF physics and internal firmware logic (100,000+ simulated landings). All three venues were implemented to provide sufficient uniqueness and overlap to: a) Verify the radar is meeting its requirements. b) Validate radar performance within the flight system and environment. Significant discoveries were attributed to each of the three elements of the testing triptych, leading to greatly improved EDL system robustness. An overview of the testing triptych methodology, discoveries, and responses to them will be subsequently discussed.

Mars Phoenix Mission↗

NASA NTRS2007

JPL Power Systems for Current Planned Missions

The viewgraph presentation includes fact sheets, instrument lists, and mission parameters for 13 future missions. Those missions include Moon Mineralogy Mapping (MMM), Space Interferometry Mission (SIM), New Millennium--Space Technology-8 (ST-8), Ocean Salinity Mapping Orbiter (Aquarius), Ocean Surface Topology Mission (OSTM), Asteroid Rendezvous Mission-SEP (Dawn), Mars Scout Lander Mission (Phoenix), Solar Powered Jupiter Orbiter (Juno), Earth orbiting carbon observatory (OCO), planet finder observatory (Kepler), far infrared/sub-millimeter telescope (Hershel), Wide-field Infrared Survey Explorer (WISE), and Mars Science Laboratory-Rover (MSL). The presentation also contains a table of current missions and instruments.

Phoenix↗

NASA NTRS2008

VML Sequencing: Growing Capabilities over Multiple Missions

Virtual Machine Language (VML) is an award-winning advanced procedural sequencing language in use on NASA deep-space missions since 1997. Missions featuring VML include Spitzer Space Telescope, Mars Odyssey, Stardust, Genesis, Mars Reconnaissance Orbiter, Phoenix, Dawn and Juno. The latest deployed version, VML 2.0, features parameterized functions, conditionals, polymorphism, a rich set of control directives and data types, event detection and response, and on-the-fly creation of spacecraft commands. This feature set is used to simplify spacecraft operations and science gathering activities. A new 2.1 version is being prototyped for use as an executive within flight instruments, and may be deployed on Juno.

Dawn↗