Search NASA⌕ Search

SEARCH · Search NASA

Results for “Potential Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effects of Surface Orientation and Termination Plane on Glass‐to‐Crystal Transformation of Lithium Disilicate by Molecular Dynamics Simulations

Glass‐to‐crystal transformation of lithium disilicate is studied using molecular dynamics simulations using an effective partial charge potential. The structural evolution of the interface between glassy and crystalline lithium disilicate is analyzed to simulate crystallization of glass on pre‐existing crystal seeds. Besides previously used atomic number density, the distribution of Q n species (Si tetrahedra with n bridging oxygen) is shown to be an effective parameter for following this transformation quantitatively. The early stages of crystal growth are significantly affected by the orientation and termination of the surface of adjacent crystal, as indicated by calculated atomic density, partial ordering, atomic segregation, and an increase in Q 3 concentration. In particular, under‐coordinated Si within the outer crystal layer is found to be most effective in transforming the amorphous structure toward crystallinity. The increase in Q 3 in the glass close to interface region most clearly shows the initial stage of lithium disilicate crystal growth.

Sun, Wei↗
DOE OSTI2022

Intermetallic particle heterogeneity controls shear localization in high-strength nanostructured Al alloys

The mechanical behavior of two nanocrystalline Al alloys, Al-Mg-Y and Al-Fe-Y, is investigated with in-situ micropillar compression testing. Both alloys were strengthened by a hierarchical microstructure including grain boundary segregation, nanometer-thick amorphous complexions, carbide nanorod precipitates with sizes of a few nanometers, and submicron-scale intermetallic particles. The maximum yield strength of the Al-Mg-Y system is measured to be 950 MPa, exceeding that of the Al-Fe-Y system (680 MPa), primarily due to a combination of more carbide nanorods and more amorphous complexions. Both alloys exhibited yield strengths much higher than those of commercial Al alloys, and therefore have great potential for structural applications. However, some micropillar specimens were observed to plastically soften through shear banding. Post-mortem investigation revealed that intermetallic-free deformation pathways of a few micrometers in length were responsible for this failure. Further characterization showed significant grain growth within the shear band. The coarsened grains maintained the same orientation with each other, pointing to grain boundary mechanisms for plastic flow, specifically grain rotation and/or grain boundary migration. Here, the presence of intermetallic particles makes it difficult for both matrix and intermetallic grains to rotate into the same orientation due to the different lattice parameters and slip systems. Therefore, we are able to conclude that a uniform distribution of intermetallic particles with an average spacing less than the percolation length of shear localization can effectively prevent the maturation of shear bands, offering a design strategy for high-strength nanocrystalline Al alloys with both high strength and stable plastic flow.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and mechanical properties

An in-depth understanding of microstructure and resultant properties is paramount in the design of a novel alloy system, especially for additive manufacturing (AM). The present investigation aims to characterize a prototypical AM Al alloy with great potential for structural applications. An Al-1.5Cu-0.8Sc-0.4Zr alloy designed using integrated computational material engineering was printed using the laser powder bed fusion AM process. This novel alloy shows promising combination of strength and ductility in as-built and peak-aged conditions. This improvement in the tensile properties is attributed to the presence of both coherent L1 2 Al 3 Sc/Al 3 (Sc,Zr) precipitates and Cu-rich regions. The microstructures were studied via extensive microscopy at different length scales using X-ray microscopy, scanning electron microscopy, and transmission electron microscopy. Fractography revealed that the columnar grain boundaries in as-built condition allow easy slip transfer as compared to the equiaxed grains, with the apex of the melt pool acting as the crack nucleation site. Furthermore, the peak aged condition resulted in improved strength while marginally sacrificing ductility due to precipitates decorating dislocations, grain boundaries and melt pool boundaries thus acting as obstacles to slip transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Prediction of α $IIb$ $β$ 3 integrin structures along its minimum free energy activation pathway

The adhesion protein integrin is a transmembrane heterodimer that plays a pivotal role in cellular processes such as cell signaling and cell migration. To execute its function, integrin undergoes extensive conformational changes from a bent-closed to an extended-open state. Resolving the structures across these changes remains a challenge with both experimental and computational methods, but it is crucial for understanding the activation mechanism of integrin. We address this challenge for the platelet integrin α IIb β 3 by employing finite temperature string method with structures of the images along the initial guess path generated by a multiscale data-driven framework. The full-length all-atom structures along the resulting minimum free energy path between the inactive bent-closed and active extended-open states of α IIb β 3 integrin are consistent with a variety of experimentally resolved structures. Changes in these predicted structures along the path show that the extension and separation of the α and β subunits from the bent-closed to the extended-open state require correlated movements between the subdomain pairs in α IIb β 3 . Furthermore, these results provide new insights into integrin activation mechanism, and the predicted structures have potential applications in guiding the design of integrin-targeting therapeutics.

Dasetty, Siva [University of Chicago, IL (United S↗
DOE OSTI2021

Investigation of phase-transformation path in TiZrHf(VNbTa)x refractory high-entropy alloys and its effect on mechanical property

Refractory high-entropy alloys (RHEAs) show a great potential as structural materials due to their remarkable properties, such as high strength and thermal stability. Despite these advantages, the RHEAs still suffer from the limited ductility at room temperature. To overcome the strength-ductility trade-off, the new RHEA design strategy, transformation-induced plasticity (TRIP) HEAs, have been developed by applying metastability-engineering approach. With the newly developed RHEAs design strategy, we designed metastable RHEAs, TiZrHfVxNbxTax (x = 1.0, 0.5 and 0.1) with decrease of the β-stabilizing elements (V, Nb, and Ta) to promote the transformation-induced ductility and work-hardening capability. The proper addition of the β-stabilizing elements (V, Nb, and Ta) into the ternary equi-molar TiZrHf alloy (TiZrHfV 0.1 Nb 0.1 Ta 0.1 ) leads to stress/strain-induced phase transformation from the body-centered cubic (BCC) to hexagonal-close-packed (HCP) α' and/or orthorhombic α" phases. Here, detailed studies on the phase transformation sequence during the deformation were carried out using X-ray diffraction (XRD), electron back-scattered diffraction (EBSD), and transmission-electron microscope (TEM), which revealed the stepwise phase transformation that is responsible for the strong strain hardening behavior. Furthermore, we further suggested the new transformation-induced-plasticity (TRIP) HEA design strategy, applying the Bo-Md approach.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ru-CoO heterostructured nanoparticles supported on nitrogen and sulfur codoped graphene nanosheets as effective electrocatalysts for hydrogen evolution reaction in alkaline media

Production of clean hydrogen energy from water splitting is vital for the future fuel industry, and nanocomposites have emerged as effective catalysts for the hydrogen evolution reaction (HER). In this study, Ru-CoO@SNG nanocomposites are prepared by controlled pyrolysis where Ru-CoO heterostructured nanoparticles are supported on nitrogen and sulfur codoped graphene oxide nanosheets. With a large surface area, the obtained composites exhibit a remarkable electrocatalytic activity toward HER in 1.0M KOH with an overpotential of only -90mV to reach the current density of 10 mA cm -2 , in comparison to -60mV for commercial Pt/C benchmark, along with high stability. Mechanistically, codoping of sulfur and nitrogen facilitates the dispersion of the nanoparticles, and the formation of Ru-CoO heterostructures increases the active site density, reduces the electron-transfer kinetics and boosts the catalytic performance. Further, results from this study highlight the unique potential of structural engineering in enhancing the electrocatalytic performance of heterostructured nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Temperature and time effects of post-weld heat treatments on tensile properties and microstructure of Zircaloy-4

Opportunities exist to expand the application of Zircaloy-4 (Zry-4) into lower-temperature (<100°C) applications. Welded areas within these structures are potential failure points and post-weld heat treatments (PWHTs) are not yet standardized for application in this temperature range. Zry-4 tungsten inert gas (TIG) welds were given PWHTs from 450-900°C with hold times from 0.5-48 hours to investigate changes to tensile properties and microstructure. Treatment of 800°C for 1 hour was found to produce the most ductile material, measured by total elongation of the tensile bar (16.5%). Furthermore, both PWHT time and temperature were observed to increase total elongation, except in extreme (>800°C or >18hours) cases, but the effect of temperature was stronger. The second order cumulative annealing parameter shows a trend with tensile properties. Average grain sizes in the fusion zone and heat affected zone did not change under any of the PWHTs until the development of an undesirable blocky-alpha phase, which was only observed to form in the heat affected zones for hold times greater than 18hr at 800°C.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Review of SiC material development for nuclear fusion applications: Cross-cutting research and emerging opportunities

The SiC-based materials, particularly SiC-fiber-reinforced SiC matrix (SiC/SiC) composites, show strong potential for structural and functional applications in future fusion power plants because they can operate at high temperatures with a range of coolants and breeders, thereby enabling higher energy conversion efficiency. Here, this paper presents recent advancements in the development of SiC-based materials, focusing on processing techniques and material performance and resistance under fusion-relevant environments. The processing activities have emphasized near-net-shape fabrication and the joining of SiC subcomponents, with processing methods and material compositions informed by previous irradiation experiments on various grades of SiC. Research on irradiation effects has remained focused on degradation mechanisms and the microstructural optimization of SiC/SiC composites irradiated to high neutron damage levels. Analysis of irradiation defects in SiC has advanced via the application of cutting-edge characterization methods, among which Raman spectroscopy is becoming a common tool to assess atomic-scale chemical disorder. Fusion–fission crosscutting irradiation research has explored combined effects in SiC/SiC composites with application-relevant geometries, including bowing of SiC/SiC composite channels under neutron flux gradients, stress evolution in SiC/SiC composite tubes under through-thickness temperature gradients, and irradiation-enhanced corrosion in SiC. Finally, research opportunities for component testing and assessment under fusion-relevant conditions, in support of emerging concepts from the private fusion sector, are discussed.

Advanced manufacturing↗
DOE OSTI2022

Influence of weave architecture on mechanical response of SiC f -SiC m tubular composites

Due to their high resistance to radiation damage and elevated temperature, silicon carbide fiber-reinforced, silicon carbide matrix composites (SiC f -SiC m ) are identified as potential cladding structures for use in nuclear reactors. In this study, four composite architectures with varying ply numbers along the thickness direction and different biaxial or triaxial plain weave orientations at either 45° or 60°, were systematically evaluated under various stress states to assess the influence of weave architecture on mechanical performance. Experiments were conducted on SiC f -SiC m composite tubes under tensile hoop, axial compression, and rotating flexural loading to evaluate the mechanical response and investigate the failure modes using high-speed imaging and digital image correlation (DIC) techniques. It was found that for tensile hoop burst and flexural loading, the braiding angle had the most significant influence on the strength of the composite, whereas the effect of fiber angle was more limited for compression testing. Under axial compression a unique failure mode where a microcrack nucleates and grows only to a length equal to the thickness of a single yarn was identified. This crack growth behavior is reflected as periodic oscillations in the load-displacement response. For both axial and hoop loading, regardless of weave angle and number of plies, failure always initiated parallel to the tube axis in a single yarn and the cumulative interaction of these microcracks lead to either axial burst or fracture at an angle to the tube axis along a yarn. Furthermore, these results point to the importance of customizing the design of tube architecture for enhanced performance in specified nuclear applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quo Vadis, Borophene?

The materials-by-design paradigm is based on synergistic efforts involving advanced computation, synthesis and characterization to ensure properties meet various technological needs within a cost-effective framework. However, starting from the elements of the periodic table to achieving useful devices is a daunting road. Borophene, a two-dimensional (2D) allotrope of boron, is envisaged to play a role in this exciting area due to its extraordinarily rich polymorphism. The multitude of potentially stable structures, several of them already realized experimentally, differentiates borophene from all other mono-elemental 'X-enes'. The possibility of harnessing this unique characteristic fuels hopes for achieving 'ondemand' crystallographic arrangements making borophene a candidate platform for various electronics, energy sciences and biology applications. Furthermore, despite the scarcity of data on intrinsic electronic properties, the experimentally confirmed polymorphisms, the recent synthesis of bilayers and the first steps towards transferring borophene on device-compatible substrates are important milestones in borophene research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

The Effect of Monomer Size on Fusion and Coupling in Colloidal Quantum Dot Molecules

The fusion step in the formation of colloidal quantum dot molecules, constructed from two core/shell quantum dots, dictates the coupling strength and hence their properties and enriched functionalities compared to monomers. Herein, studying the monomer size effect on fusion and coupling, we observe a linear relation of the fusion temperature with the inverse nanocrystal radius. This trend, similar to that in nanocrystal melting, emphasizes the role of the surface energy. The suggested fusion mechanism involves intraparticle ripening where atoms diffuse to the reactive connecting neck region. Moreover, the effect of monomer size and neck filling on the degree of electronic coupling is studied by combined atomistic-pseudopotential calculations and optical measurements, uncovering strong coupling effects in small QD dimers, leading to significant optical changes. Understanding and controlling the fusion and hence coupling effect allows tailoring the optical properties of these nanoscale structures, with potential applications in photonic and quantum technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkali Cation Inhibition of Imidazolium-Mediated Electrochemical CO 2 Reduction on Silver

Imidazolium-based ionic liquids have led to enhanced CO 2 electroreduction activity due to cation effects at the cathode surface, stabilizing the reaction intermediates and decreasing the activation energy. In aqueous media, alkali cations are also known to improve CO 2 reduction activity on metals such as Ag, with the enhancement attributed to electrical double layer effects and trending with the size of the alkali cation. However, the effect of a mixed catholyte solution of alkali cations in the presence of an imidazolium-based ionic liquid has not been well-explored. Herein, 1-ethyl-3-methylimidazolium tetrafluoroborate, [EMIM][BF 4 ], in water was investigated with alkali salts to unravel the interaction effects for CO 2 electroreduction on Ag. Although both [EMIM] + and alkali cations have individually improved CO 2 to CO conversion on Ag in water, electrochemical results showed that alkali cations hindered imidazolium-mediated CO 2 electroreduction in most conditions. Li + , in particular, was sharply inhibitory compared to other alkali cations and strongly redirected the selectivity to hydrogen evolution. The nature of the alkali cation inhibition was investigated with spectroscopic techniques, including in situ surface-enhanced Raman spectroscopy (SERS) and dynamic electrochemical impedance spectroscopy (DEIS). Along with computational insights from density functional theory (DFT), the electrochemical and spectroscopic data suggest that alkali cations inhibit [EMIM]-mediated CO 2 reduction by competing for surface adsorption sites, preventing the potential-dependent structural reorientation of imidazolium, and promoting hydrogen evolution by bringing solvated water to the cathode surface.

cations↗
DOE OSTI2021

Enhance Low Level Temperature and Moisture Profiles Through Combining NUCAPS, ABI Observations, and RTMA Analysis

Thermodynamic information from low levels in the atmosphere is crucial for operational weather forecasts and meteorological researchers. The NOAA Unique Combined Atmospheric Processing System (NUCAPS) sounding products have been proven beneficial to fill the data gap between synoptic radiosonde observations (RAOBs). However, compared with the upper troposphere, the accuracy of NUCAPS soundings in the low levels still needs improvement. In this study, a deep neural network (DNN) is applied to fuse multiple data sources to enhance the NUCAPS temperature and moisture profiles in the lower atmosphere. The network is developed by combining satellite observations, including NUCAPS sounding retrievals and high resolution geostationary satellite observations from the Advanced Baseline Imager, and surface analysis from the Real-Time Mesoscale Analysis (RTMA) as inputs, while collocated soundings from ECMWF re-analysis version 5 are used as the benchmark for the training. The performance of the model is evaluated by using the independent testing data set, data from a different year, as well as collocated RAOBs, showing improvement to the temperature and moisture profiles by reducing the root-mean-squared-error (RMSE) by more than 30% in the lower atmosphere (from 700 hPa to surface) in both clear sky and partially cloudy conditions. A convective event from June 18, 2017 is presented to illustrate the application of the enhanced low level soundings on high impact weather events. The enhanced soundings from fused data capture the large surface-based convective available potential energy structures in the preconvection environment, which is very useful for severe storm nowcasting and forecasting applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Learning nonlinear operators via DeepONet based on the universal approximation theorem of operators

It is widely known that neural networks (NNs) are universal approximators of continuous functions. However, a less known but powerful result is that a NN with a single hidden layer can accurately approximate any nonlinear continuous operator. This universal approximation theorem of operators is suggestive of the structure and potential of deep neural networks (DNNs) in learning continuous operators or complex systems from streams of scattered data. Here, in this work, we thus extend this theorem to DNNs. We design a new network with small generalization error, the deep operator network (DeepONet), which consists of a DNN for encoding the discrete input function space (branch net) and another DNN for encoding the domain of the output functions (trunk net). We demonstrate that DeepONet can learn various explicit operators, such as integrals and fractional Laplacians, as well as implicit operators that represent deterministic and stochastic differential equations. We study different formulations of the input function space and its effect on the generalization error for 16 different diverse applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A novel symmetric pyrazine (pyz)-bridged uranyl dimer [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– : synthesis, structure and computational analysis

In this work, we report on the synthesis of (HPyz + ) 2 [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 ·2H 2 O which features a novel pyrazine-bridged uranyl dimer, [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– . A rigorous computational and experimental analysis of this compound was performed to fully explore the influence of coordination on the electronic structure and potential charge-transfer characteristics of this dimer, revealing a delocalized π-system across the bridging pyrazine and the axial components of both uranyl centers. Electrostatic surface potentials, used to rationalize the observed assembly, indicate a decreased basicity of the uranyl oxo versus [UO 2 Cl 4 ] 2– , and signify a lessened capacity for the terminal –yl oxos of the [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– dimer to participate in supramolecular assembly. A combined density functional theory (DFT) and quantum theory of atoms in molecules (QTAIM) analysis further evidenced an increase in U&#x2550;O bond strengths within the dimer, which is supported by a blue shift in the characteristic Raman-active uranyl symmetric stretch (ν 1 ) with respect to the more typically observed [UO 2 Cl 4 ] 2– .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

TDCOSMO. VII. Boxyness/discyness in lensing galaxies: Detectability and impact on H 0

In the context of gravitational lensing, the density profile of lensing galaxies is often considered to be perfectly elliptical. Potential angular structures are generally ignored, except to explain flux ratios of point-like sources (i.e. flux ratio anomalies). Surprisingly, the impact of azimuthal structures on extended images of the source has not been characterised, nor has its impact on the H 0 inference. We address this task by creating mock images of a point source embedded in an extended source and lensed by an elliptical galaxy on which multipolar components are added to emulate boxy or discy isodensity contours. Modelling such images with a density profile free of angular structure allows us to explore the detectability of image deformation induced by the multipoles in the residual frame. Multipole deformations are almost always detectable for our highest signal-to-noise ratio (S/N) mock data. However, the detectability depends on the lens ellipticity and Einstein radius, on the S/N of the data, and on the specific lens modelling strategy. Multipoles also introduce small changes to the time-delays. We therefore quantify how undetected multipoles would impact H 0 inference. When no multipoles are detected in the residuals, the impact on H 0 for a given lens is in general less than a few k ms -1 Mpc -1 , but in the worst-case scenario, combining low S/N in the ring and large intrinsic boxyness or discyness, the bias on H0 can reach 10-12 km s -1 Mpc -1 . If we now look at the inference on H 0 from a population of lensing galaxies with a distribution of multipoles representative of what is found in the light profile of elliptical galaxies, we find a systematic bias on H 0 of less than 1%. A comparison of our mock systems to the state-of-the-art time-delay lens sample studied by the H0LiCOW and TDCOSMO collaborations indicates that multipoles are currently unlikely to be a source of substantial systematic bias on the inferred value of H 0 from time-delay lenses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Characteristics of Vertical Ground Motions and Their Effect on the Seismic Response of Bridges in the Near-Field: A State-of-the-Art Review

Despite the evidence from past earthquakes and several numerical investigations demonstrating the detrimental impact of vertical ground motions (VGMs) on the integrity of bridge structures, incorporating their effects into seismic assessment and design procedures has traditionally been given limited consideration. Current codes utilize rather simplistic approaches to account for the concurrent effects of vertical and horizontal motions in structural performance evaluations, potentially leading to unconservative estimates of structural demands. This paper reviews the main features of VGMs and their effect on the seismic response of bridges. The methods and empirical models available to estimate vertical motions for design purposes are discussed, and research gaps and related research needs are identified. Finally, the emerging role of physics-based ground-motion simulations, as well as their limitations, in supporting future research and informing the development of simplified design procedures is examined. The main areas of interest for future research are identified in the need to carry out systematic sensitivity studies to gain insight into the main earthquake parameters that influence key VGMs features, understand the influence of soil nonlinearities on VGMs amplitude and frequency content, inform the development of empirical models that cover a range of site conditions and source-to-site distances where current models are poorly constrained, generate arrays of motions to update coherency models to properly inform the analysis of distributed infrastructure, investigate the impulsive character of VGMs, and assess the approximations made in estimating VGMs with 1D site response analyses. Furthermore, specific focus is laid on large-magnitude earthquakes in the near-field.

Asynchronous ground motion↗