Search NASA⌕ Search

SEARCH · Search NASA

Results for “Projection scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

A Fundamental Mathematical Model of a Microbial Predenitrification System

Space flight beyond Low Earth Orbit requires sophisticated systems to support all aspects of the mission (life support, real-time communications, etc.). A common concern that cuts across all these systems is the selection of information technology (IT) methodology, software and hardware architectures to provide robust monitoring, diagnosis, and control support. Another dimension of the problem space is that different systems must be integrated seamlessly so that communication speed and data handling appear as a continuum (un-interrupted). One such team investigating this problem is the Advanced Integration Matrix (AIM) team whose role is to define the critical requirements expected of software and hardware to support an integrated approach to the command and control of Advanced Life Support (ALS) for future long-duration human space missions, including permanent human presence on the Moon and Mars. A goal of the AIM team is to set the foundation for testing criteria that will assist in specifying tasks, control schemes and test scenarios to validate and verify systems capabilities. This project is to contribute to the goals of the AIM team by assisting with controls planning for ALS. Control for ALS is an enormous problem it involves air revitalization, water recovery, food production, solids processing and crew. In more general terms, these systems can be characterized as involving both continuous and discrete processes, dynamic interactions among the sub-systems, nonlinear behavior due to the complex operations, and a large number of multivariable interactions due to the dimension of the state space. It is imperative that a baseline approach from which to measure performance is established especially when the expectation for the control system is complete autonomous control.

Hoo, Karlene A.↗
DOE OSTI2024

Concrete Thermal Energy Storage Enabling Flexible Operation without Coal Plant Cycling

The work described in this report is responsive to the Office of Fossil Energy program “Energy Storage for Fossil Power Generation.” The pilot plant built as a result of this project demonstrated the feasibility and performance of a concrete thermal energy storage (CTES) system integrated with a supercritical coal power plant. The 10 MWh electrical (>25 MWh thermal) CTES unit, developed by Storworks Power, was designed to enable flexible operation of coal plants without cycling damage. The project's key technical achievements showcase a significant advancement in energy storage technology. A modular CTES system using 42 “Bolderblocs” units was successfully designed and constructed at Alabama Power’s Plant Gaston Unit 5, with each block containing embedded stainless-steel coils in specialized, cost-effective high-temperature concrete. The system interfaced seamlessly with the plant's 3500 psig (241 barg), 1000°F (538°C) supercritical steam, demonstrating operational flexibility. Over 86 full cycles, the CTES exhibited rapid charging and discharging capabilities, effectively mimicking steam turbine feed conditions and handling varying load profiles and storage durations. Performance validation confirmed the system's ability to consistently meet design target steam conditions of 75 bar-a and ~400°C for nominal baseline discharge. The concrete material withstood repeated thermal cycling without degradation, validating earlier lab-scale tests. Integration of balance of plant components, including a condensate management system with storage tank and air-cooled condenser, minimized plant interfaces and water consumption. A robust control scheme ensured safe, automated operation across various scenarios. Key learnings from the project were invaluable: 1. Initial concrete drying and commissioning procedures were refined for future deployments, enhancing efficiency in subsequent installations. 2. System flexibility exceeded expectations, with rapid response to changing conditions. 3. Design improvements were identified including optimized insulation and piping that will enhance overall system efficiency in future deployments 4. Full cycle thermal roundtrip efficiencies exceeded 88%. While the roundtrip electrical efficiency was somewhat limited by known challenges using input steam, such constraints may be mitigated by swapping steam for hot air as thermal input. 5. A summary of key performance parameters for the pilot test and predicted performance of a full scale commercial system with specified improvements determined from the pilot are shown in Section 8. The project faced challenges, including COVID-19 delays and host plant availability constraints. However, these were overcome through adaptive planning and execution. The successful management of these obstacles demonstrated the resilience and adaptability of the project team and the robustness of the CTES technology. This successful pilot demonstrates the potential for CTES to enhance coal plant flexibility, supporting grid stability as renewable penetration increases. The validated design and operational data provide a solid foundation for scaling up to utility-scale implementations, potentially transforming how thermal plants operate in evolving energy landscapes. The system's ability to rapidly respond to changing grid conditions while maintaining high efficiency makes it a promising solution for balancing intermittent renewable energy sources. Furthermore, the project highlighted the potential for even greater efficiencies in future iterations. The use of air as an input medium could potentially eliminate the limitations observed with steam input, opening new possibilities for energy storage applications beyond coal plant integration. In conclusion, this pilot project not only achieved its primary goals but also uncovered additional benefits and potential applications of the CTES technology. It represents a significant step forward in addressing the challenges of grid stability and flexibility in an increasingly renewable-driven energy landscape.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Use of Remote Sensing and In-Situ Observations to Develop and Evaluate Improved Representations of Convection and Clouds for the ACME Model

The overachieving goal of the whole CMDV-MCS project is to improve understanding of warm season continental convection and to develop treatments of convection and microphysics capable of representing mesoscale convective systems (MCSs) features in large-scale models. Our tasks for this project contributing to the overachieving goal include: (1) Improve the ice nucleation formulation for MG2 and P3 cloud microphysics schemes; (2) Improve the treatment of subgrid dynamics and thermodynamics driving the ice nucleation in E3SM; and (3) Test the performance of improved ice microphysics in E3SM with observation data. In this project, we have (1) Improved the ice nucleation parameterization for MG2 and P3 in E3SM by implementing two advanced empirical parameterizations with connection to aerosols. The two deterministic heterogeneous ice nucleation parameterizations (i.e., DeMott et al., 2015; Niemand et al., 2012) were merged with the MG2 and P3 cloud microphysics schemes in E3SM. Long-term simulations were conducted to examine the impacts of these new parameterizations on simulated cloud properties; (2) Improved the treatment of subgrid dynamics and thermodynamics driving the ice nucleation in E3SM. We evaluated the double Gaussian PDF of vertical velocity simulated by the Cloud Layers Unified By Binormals (CLUBB) and the sub-column vertical velocity sampled from the Subgrid Importance Latin Hypercube Sampler (SILHS) in E3SM. We introduced the vertical velocity variance induced by topographic gravity waves for ice nucleation and droplet activation; and (3) Tested the performance of improved ice microphysics in E3SM with observation data. We tested the new treatments of ice nucleation in the single column model (SCM) mode for the stratiform mixed-phase clouds observed during 9-10 October 2004 in the DOE ARM Mixed-Phase Arctic Cloud Experiment (M-PACE) and for the convective clouds observed on 20 May 2011 in the Midlatitude Continental Convective Clouds Experiment (MC3E). Modeled ice nucleating particles (INPs) concentrations were compared against observations collected around the globe.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Improving the Parameterization of Cloud and Rain Microphysics in E3SM using Novel Observationally-Constrained Bayesian Approach (Final Technical Report)

In this project, we sought to develop new cloud and rain microphysics frameworks within the Energy Exascale Earth System Model (E3SM). This work encompassed two primary avenues of research: 1) Further development of a Bayesian-based scheme called BOSS (Bayesian Observationally-constrained Statistical-physical Scheme) to represent cloud and rain microphysics, testing it in realistic high-resolution cloud models, and implementing it in E3SM; 2) Development of a methodology utilizing machine learning to enable computationally tractable use of tractable use of Markov chain Monte Carlo sampling for Bayesian parameter estimation in Earth system and cloud models. In this project, we adapted the BOSS microphysics scheme, originally formulated for rain-only, to include all liquid-phase microphysical processes for cloud and rain, in particular the processes that mediate between these two categories, for example the conversion from cloud to rain through collision and coalescence of drops. We constrained the scheme via comparison and testing against a detailed model that explicitly represents the evolution of cloud and rain particles, called a bin microphysics scheme.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Final Report

This project focused on investigating the prospects of two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) and graphene, for developing nanostructures that are potentially useful for quantum science. These materials class exhibit a range of fascinating electronic and optical properties and, due to their sub-nanometer thickness, are particularly well suited for confining electronic quantum states in atomic-size structures. The project involved developing first-principles calculations that can predict coherent lifetimes of defects; theoretical schemes for identifying new platforms suitable for studying the dynamics of driven quantum systems; and optical and electronic spectroscopy characterization of novel defects and heterostructures with the aim of creating the next generation of materials for quantum science. This report provides a brief background into the project, highlights some of the major achievements accomplished within the projects and lists the supported publications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Probabilistic Nanomagnetic Memories for Uncertain and Robust Machine Learning

This project evaluated the use of emerging spintronic memory devices for robust and efficient variational inference schemes. Variational inference (VI) schemes, which constrain the distribution for each weight to be a Gaussian distribution with a mean and standard deviation, are a tractable method for calculating posterior distributions of weights in a Bayesian neural network such that this neural network can also be trained using the powerful backpropagation algorithm. Our project focuses on domain-wall magnetic tunnel junctions (DW-MTJs), a powerful multi-functional spintronic synapse design that can achieve low power switching while also opening the pathway towards repeatable, analog operation using fabricated notches. Our initial efforts to employ DW-MTJs as an all-in-one stochastic synapse with both a mean and standard deviation didn’t end up meeting the quality metrics for hardware-friendly VI. In the future, new device stacks and methods for expressive anisotropy modification may make this idea still possible. However, as a fall back that immediately satisfies our requirements, we invented and detailed how the combination of a DW-MTJ synapse encoding the mean and a probabilistic Bayes-MTJ device, programmed via a ferroelectric or ionically modifiable layer, can robustly and expressively implement VI. This design includes a physics-informed small circuit model, that was scaled up to perform and demonstrate rigorous uncertainty quantification applications, up to and including small convolutional networks on a grayscale image classification task, and larger (Residual) networks implementing multi-channel image classification. Lastly, as these results and ideas all depend upon the idea of an inference application where weights (spintronic memory states) remain non-volatile, the retention of these synapses for the notched case was further interrogated. These investigations revealed and emphasized the importance of both notch geometry and anisotropy modification in order to further enhance the endurance of written spintronic states. In the near future, these results will be mapped to effective predictions for room temperature and elevated operation DW-MTJ memory retention, and experimentally verified when devices become available.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Reliable Protection for an Inverter-Based Resources Dominant Grid: Technology Development and Field Demonstration

The project aimed to address the challenges posed by the rapid growth of inverter-based resources (IBR) such as solar, wind, and battery storage, which have fundamentally changed fault behavior, system strength, and protection performance in bulk power systems. Traditional protection schemes, designed for synchronous generator-dominated grids, are inadequate under high IBR penetration. Overall, the project materially advances protection modeling and simulation capabilities needed to maintain reliable grid protection under high IBR penetration. The results build utility confidence in operating power systems safely and reliably across a wide range of generation mixes, supporting grid modernization goals.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2000

Towards Flange-to-Flange Turbopump Simulations for Liquid Rocket Engines

The primary objective of this research is to support the design of liquid rocket systems for the Advanced Space Transportation System. Since the space launch systems in the near future are likely to rely on liquid rocket engines, increasing the efficiency and reliability of the engine components is an important task. One of the major problems in the liquid rocket engine is to understand fluid dynamics of fuel and oxidizer flows from the fuel tank to plume. Understanding the flow through the entire turbopump geometry through numerical simulation will be of significant value toward design. This will help to improve safety of future space missions. One of the milestones of this effort is to develop, apply and demonstrate the capability and accuracy of 3D CFD methods as efficient design analysis tools on high performance computer platforms. The development of the MPI and MLP versions of the INS3D code is currently underway. The serial version of INS3D code is a multidimensional incompressible Navier-Stokes solver based on overset grid technology. INS3D-MPI is based on the explicit massage-passing interface across processors and is primarily suited for distributed memory systems. INS3D-MLP is based on multi-level parallel method and is suitable for distributed-shared memory systems. For the entire turbopump simulations, moving boundary capability and an efficient time-accurate integration methods are build in the flow solver. To handle the geometric complexity and moving boundary problems, overset grid scheme is incorporated with the solver that new connectivity data will be obtained at each time step. The Chimera overlapped grid scheme allows subdomains move relative to each other, and provides a great flexibility when the boundary movement creates large displacements. The performance of the two time integration schemes for time-accurate computations is investigated. For an unsteady flow which requires small physical time step, the pressure projection method was found to be computationally efficient since it does not require any subiterations procedure. It was observed that the artificial compressibility method requires a fast convergence scheme at each physical time step in order to satisfy incompressibility condition. This was obtained by using a GMRES-ILU(0) solver in our computations. When a line-relaxation scheme was used, the time accuracy was degraded and time-accurate computations became very expensive. The current geometry for the LOX boost turbopump has various rotating and stationary components, such as inducer, stators, kicker, hydrolic turbine, where the flow is extremely unsteady. Figure 1 shows the geometry and computed surface pressure of the inducer. The inducer and the hydrolic turbine rotate in different rotational speed.

Kiris, Cetin↗
DOE OSTI2025

A high-order computational framework for particle-resolved simulations of disperse multiphase flows

This work presents a high-order numerical approach for particle-resolved simulations of disperse multiphase flows, where the Navier-Stokes equations for fluid flow are solved using a high-order spectral element method in the Eulerian framework, and the particle phase is directly simulated with a discrete element method. The coupling between particles and fluids is explicitly handled using an adapted direct-forcing immersed boundary method. Unlike the conventional schemes, a high-order barycentric Lagrange interpolation method and a Gaussian projection kernel are used to ensure accurate momentum exchange between local boundary points and surrounding fluid nodes in the framework of high-order fluid solver. Benchmark tests of increasing complexity are conducted to demonstrate the accuracy and efficiency of our method. Here, it is found that our approach exhibits an excellent convergence performance, as the fluid element/grid is refined and the number of boundary points increases. Compared to conventional low-order methods, the proposed high-order framework enables the use of substantially larger fluid elements while maintaining high accuracy in modeling fluid-particle interactions, owing to the enhanced resolution of high-order basis functions. Moreover, since the primary unknowns are stored at element or grid nodes, the high-order approach offers improved efficiency in both CPU memory usage and total computational cost.

42 ENGINEERING↗
DOE OSTI2023

Data assimilation in operator algebras

We develop an algebraic framework for sequential data assimilation of partially observed dynamical systems. In this framework, Bayesian data assimilation is embedded in a nonabelian operator algebra, which provides a representation of observables by multiplication operators and probability densities by density operators (quantum states). In the algebraic approach, the forecast step of data assimilation is represented by a quantum operation induced by the Koopman operator of the dynamical system. Moreover, the analysis step is described by a quantum effect, which generalizes the Bayesian observational update rule. Projecting this formulation to finite-dimensional matrix algebras leads to computational schemes that are i) automatically positivity-preserving and ii) amenable to consistent data-driven approximation using kernel methods for machine learning. Moreover, these methods are natural candidates for implementation on quantum computers. Applications to the Lorenz 96 multiscale system and the El Niño Southern Oscillation in a climate model show promising results in terms of forecast skill and uncertainty quantification.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Whole program Adaptive Error Detection and Mitigation

Our project investigated methods to detect soft errors in computing systems. Such detection schemes must have low overheads and also generate no false positives. Our solutions focused on control-space error detection based on changing addressing schemes so that faults tend to cascade – rather than being masked. Our solutions also addressed data-space error detection by synthesizing error detectors based on rigorous floating-point error analysis.

42 ENGINEERING↗
DOE OSTI2025

Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF

This study investigates the simulation of marine stratocumulus (stratoCu) clouds – common in many offshore and coastal wind energy regions - using Lagrangian Superdroplet Method (SDM) implemented in Energy Research and Forecasting (ERF) model. Developed by the Wind Energy Technologies Office (WETO), ERF is a high-resolution atmospheric modeling tool that relies on traditional bulk microphysics schemes. Under an LLNL-led Laboratory Directed Research and Development (LDRD) project, SDM was integrated into ERF to improve cloud process fidelity by explicitly tracking individual “superdroplets”. This enables a realistic representation of the droplet size spectrum, cloud-atmosphere interactions, and potential feedbacks from wind plants on atmospheric flow and cloud structure.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Mission Analysis Program for Solar Electric Propulsion (MAPSEP). Volume 1: Analytical manual for earth orbital MAPSEP

An introduction to the MAPSEP organization and a detailed analytical description of all models and algorithms are given. These include trajectory and error covariance propagation methods, orbit determination processes, thrust modeling, and trajectory correction (guidance) schemes. Earth orbital MAPSEP contains the capability of analyzing almost any currently projected low thrust mission from low earth orbit to super synchronous altitudes. Furthermore, MAPSEP is sufficiently flexible to incorporate extended dynamic models, alternate mission strategies, and almost any other system requirement imposed by the user. As in the interplanetary version, earth orbital MAPSEP represents a trade-off between precision modeling and computational speed consistent with defining necessary system requirements. It can be used in feasibility studies as well as in flight operational support. Pertinent operational constraints are available both implicitly and explicitly. However, the reader should be warned that because of program complexity, MAPSEP is only as good as the user and will quickly succumb to faulty user inputs.

Source record↗
NASA NTRS1984

A spectral element method for fluid dynamics - Laminar flow in a channel expansion

A spectral element method that combines the generality of the finite element method with the accuracy of spectral techniques is proposed for the numerical solution of the incompressible Navier-Stokes equations. In the spectral element discretization, the computational domain is broken into a series of elements, and the velocity in each element is represented as a high-order Lagrangian interpolant through Chebyshev collocation points. The hyperbolic piece of the governing equations is then treated with an explicit collocation scheme, while the pressure and viscous contributions are treated implicitly with a projection operator derived from a variational principle. The implementation of the technique is demonstrated on a one-dimensional inflow-outflow advection-diffusion equation, and the method is then applied to laminar two-dimensional (separated) flow in a channel expansion. Comparisons are made with experiment and previous numerical work.

Patera, A. T.↗
NASA NTRS1986

Use of flight simulation to develop terminal instrument procedures for transport category aircraft

In a collaborative effort between the FAA and NASA, a simulation was conducted to look at the issues involved with flying a large, widebody aircraft in the terminal area using MLS-RNAV procedures. A variety of approach paths, departure paths, and holding patterns were investigated during the course of the study, which included the participation of subject pilots. The simulation made use of paths designed by the FAA Office of Aviation Standards and employed Langley's Visual Motion Simulator (VMS) for their execution. Data obtained from this simulation will be used to support the joint FAA/USAF MLS flight test and demonstration project. This paper describes the flight simulation facility adapted to model terminal area maneuvers for jet transport aircraft using the Microwave Landing System (MLS). A description of the overall project will be presented first, along with a discussion of the guidance schemes used, followed by a description of the simulation hardware and software. A sample of the resulting data will also be presented.

Branstetter, J. R.↗
NASA NTRS1991

On the optimality of code options for a universal noiseless coder

A universal noiseless coding structure was developed that provides efficient performance over an extremely broad range of source entropy. This is accomplished by adaptively selecting the best of several easily implemented variable length coding algorithms. Custom VLSI coder and decoder modules capable of processing over 20 million samples per second are currently under development. The first of the code options used in this module development is shown to be equivalent to a class of Huffman code under the Humblet condition, other options are shown to be equivalent to the Huffman codes of a modified Laplacian symbol set, at specified symbol entropy values. Simulation results are obtained on actual aerial imagery, and they confirm the optimality of the scheme. On sources having Gaussian or Poisson distributions, coder performance is also projected through analysis and simulation.

Yeh, Pen-Shu↗
NASA NTRS1992

Building a generalized distributed system model

The key elements in the second year (1991-92) of our project are: (1) implementation of the distributed system prototype; (2) successful passing of the candidacy examination and a PhD proposal acceptance by the funded student; (3) design of storage efficient schemes for replicated distributed systems; and (4) modeling of gracefully degrading reliable computing systems. In the third year of the project (1992-93), we propose to: (1) complete the testing of the prototype; (2) enhance the functionality of the modules by enabling the experimentation with more complex protocols; (3) use the prototype to verify the theoretically predicted performance of locking protocols, etc.; and (4) work on issues related to real-time distributed systems. This should result in efficient protocols for these systems.

Mukkamala, R.↗
NASA NTRS1997

RIACS

Topics considered include: high-performance computing; cognitive and perceptual prostheses (computational aids designed to leverage human abilities); autonomous systems. Also included: development of a 3D unstructured grid code based on a finite volume formulation and applied to the Navier-stokes equations; Cartesian grid methods for complex geometry; multigrid methods for solving elliptic problems on unstructured grids; algebraic non-overlapping domain decomposition methods for compressible fluid flow problems on unstructured meshes; numerical methods for the compressible navier-stokes equations with application to aerodynamic flows; research in aerodynamic shape optimization; S-HARP: a parallel dynamic spectral partitioner; numerical schemes for the Hamilton-Jacobi and level set equations on triangulated domains; application of high-order shock capturing schemes to direct simulation of turbulence; multicast technology; network testbeds; supercomputer consolidation project.

Oliger, Joseph↗