Search NASA⌕ Search

SEARCH · Search NASA

Results for “Proving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Operando Investigation of the Molecular Origins of Dipole Switching in P(VDF‐TrFE‐CFE) Terpolymer for Large Adiabatic Temperature Change

Abstract Relaxor ferroelectric polymers exhibiting a giant electrocaloric effect (ECE) can potentially be used to create next‐generation solid‐state coolers. Under an electric field, poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) terpolymer goes through a large dipolar entropy change producing a high adiabatic temperature change (Δ T ECE ). This work resolves the molecular origins of the large entropy change behind the electric field‐induced dipole switching. A Fourier transform infrared spectroscopy equipped with a high voltage source is used to operandoly observe the characteristic molecular vibrational modes. A short‐range trans (T) conformation of the CF 2 ‐CH 2 dyads interrupted by a gauche (G) conformation, e.g., TTTG in the terpolymer chain, undergoes a dynamic transformation that leads to a corresponding Δ T ECE whenever an electric field is applied. The molecular dynamics simulation also proves that the energy barrier that the transformation from TTTGs into a long T sequence overcomes is smaller than that for all other conformations. A mixed solvent system is used to obtain T3G‐enriched terpolymer films exhibiting a 4.02 K Δ T ECE at 60 MV m −1 and these films are employed to manufacture a 2‐layer‐cascaded cooling device that achieves a 6.7 K temperature lift, the highest reported value for a 2‐layer cascaded device made of fluoropolymers.

Zhu, Yuan↗
DOE OSTI2020

A Garnet-Type Solid-Electrolyte-Based Molten Lithium–Molybdenum–Iron(II) Chloride Battery with Advanced Reaction Mechanism

Solid-electrolyte-based molten-metal batteries have attracted considerable attention for grid-scale energy storage. Although ZEBRA batteries are considered one of the promising candidates, they still have the potential concern of metal particle growth and ion exchange with the β”-Al 2 O 3 electrolyte. Herein, a Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-electrolyte-based molten lithium–molybdenum–iron(II) chloride battery (denoted as Li–Mo–FeCl 2 ) operated at temperature of 250 °C, comprising a mixture of Fe and LiCl cathode materials, a Li anode, a garnet-type Li-ion ceramic electrolyte, and Mo additive, is designed to overcome these obstacles. Different from conventional battery reaction mechanisms, this battery revolutionarily synchronizes the reversible Fe–Mo alloying–dealloying reactions with the delithiation–lithiation processes, meaning that the porous Mo framework derived from Fe–Mo alloy simultaneously suppresses the growth of pure Fe particles. By adopting a Li anode and a Li-ion ceramic electrolyte, the corrosion problem between the cathode and the solid electrolyte is overcome. With similar battery cost ($12 kWh –1 ), the theoretical energy density of Li–Mo–FeCl 2 battery surpasses that of a Na–FeCl 2 ZEBRA battery over 25%, to 576 Wh kg –1 and 2216 Wh L –1 , respectively. Experimental results further prove this cell has excellent cycling performance (472 mAh g LiCl –1 after 300 cycles, 50 mg active material) and strong tolerance against the overcharge–overdischarge (3–1.6 V) and freezing–thawing (25–250 °C) incidents.

36 MATERIALS SCIENCE↗
DOE OSTI2022

How Reproducible are Surface Areas Calculated from the BET Equation?

Abstract Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro‐ and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already‐measured raw adsorption isotherms were provided to sixty‐one labs, who were asked to calculate the corresponding BET areas. This round‐robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well‐known Rouquerol criteria and makes an unambiguous BET area assignment possible.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interspace and Vacancy Modulation: Promoting the Zinc Storage of an Alcohol-Based Organic–Inorganic Cathode in a Water–Organic Electrolyte

Expanding interspace and introducing vacancies are desired to promote the mobility of Zn ions and unlock the inactive sites of layered cathodes. However, this two-point modulation has not yet been achieved simultaneously in vanadium phosphate. Here, in this work, a strategy is proposed for fabricating an alcohol-based organic–inorganic hybrid material, VO 1–x PO 4 ·0.56C 6 H 14 O 4 , to realize the conjoint modulation of the d-interspace and oxygen vacancies. Peculiar triglycol molecules with an inclined orientation in the interlayer also boost the improvement in the conversion rate of V 5+ to V 4+ and the intensity of the P—O bond. Their synergism can ensure steerable adjustment for intercalation kinetics and electron transport, as well as realize high chemical reactivity and redox-center optimization, leading to at least 200% increase in capacity. Using a water–organic electrolyte, the designed Zn-ion batteries with an ultrahigh-rate profile deliver a long-term durability (fivefold greater than pristine material) and an excellent energy density of ≈142 Wh kg –1 (including masses of cathode and anode), thereby substantially outstripping most of the recently reported state-of-the-art zinc-ion batteries. This work proves the feasibility to realize the two-point modulation by using organic intercalants for exploiting high-performance new 2D materials.

25 ENERGY STORAGE↗
DOE OSTI2022

All‐Polymer Bulk‐Heterojunction Organic Electrochemical Transistors with Balanced Ionic and Electronic Transport

Abstract The rapid development of organic electrochemical transistor (OECTs)‐based circuits brings new opportunities for next‐generation integrated bioelectronics. The all‐polymer bulk‐heterojunction (BHJ) offers an attractive, inexpensive alternative to achieve efficient ambipolar OECTs, and building blocks of logic circuits constructed from them, but have not been investigated to date. Here, the first all‐polymer BHJ‐based OECTs are reported, consisting of a blend of new p‐type ladder conjugated polymer and a state‐of‐the‐art n‐type ladder polymer. The whole ladder‐type polymer BHJ also proves that side chains are not necessary for good ion transport. Instead, the polymer nanostructures play a critical role in the ion penetration and transportation and thus in the device performance. It also provides a facile strategy and simplifies the fabrication process, forgoing the need to pattern multiple active layers. In addition, the development of complementary metal–oxide–semiconductor (CMOS)‐like OECTs allows the pursuit of advanced functional logic circuitry, including inverters and NAND gates, as well as for amplifying electrophysiology signals. This work opens a new approach to the design of new materials for OECTs and will contribute to the development of organic heterojunctions for ambipolar OECTs toward high‐performing logic circuits.

Chemistry↗
DOE OSTI2022

Controlling Mineralization with Protein–Functionalized Peptoid Nanotubes

Sequence-defined foldamers that self-assemble into well-defined architectures are promising scaffolds to template inorganic mineralization. However, it has been challenging to achieve robust control of nucleation and growth without sequence redesign or extensive experimentation. Here, peptoid nanotubes functionalized with a panel of solid-binding proteins are used to mineralize homogeneously distributed and monodisperse anatase nanocrystals from the water-soluble TiBALDH precursor. Crystallite size is systematically tuned between 1.4 and 4.4 nm by changing protein coverage and the identity and valency of the genetically engineered solid-binding segments. The approach is extended to the synthesis of gold nanoparticles and, using a protein encoding both material-binding specificities, to the fabrication of titania/gold nanocomposites capable of photocatalysis under visible-light illumination. Here, beyond uncovering critical roles for hierarchical organization and denticity on solid-binding protein mineralization outcomes, the strategy described herein should prove valuable for the fabrication of hierarchical hybrid materials incorporating a broad range of inorganic components.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tension‐Induced Cavitation in Li‐Metal Stripping

Abstract Designing stable Li metal and supporting solid structures (SSS) is of fundamental importance in rechargeable Li‐metal batteries. Yet, the stripping kinetics of Li metal and its mechanical effect on the supporting solids (including solid electrolyte interface) remain mysterious to date. Here, through nanoscale in situ observations of a solid‐state Li‐metal battery in an electron microscope, two distinct cavitation‐mediated Li stripping modes controlled by the ratio of the SSS thickness ( t ) to the Li deposit's radius ( r ) are discovered. A quantitative criterion is established to understand the damage tolerance of SSS on the Li‐metal stripping pathways. For mechanically unstable SSS ( t / r < 0.21), the stripping proceeds via tension‐induced multisite cavitation accompanied by severe SSS buckling and necking, ultimately leading to Li “trapping” or “dead Li” formation; for mechanically stable SSS ( t / r > 0.21), the Li metal undergoes nearly planar stripping from the root via single cavitation, showing negligible buckling. This work proves the existence of an electronically conductive precursor film coated on the interior of solid electrolytes that however can be mechanically damaged, and it is of potential importance to the design of delicate Li‐metal supporting structures to high‐performance solid‐state Li‐metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Vapor–Phase Synthesis of Electrocatalytic Covalent Organic Frameworks

The inability to process many covalent organic frameworks (COFs) as thin films plagues their widespread utilization. Herein, a vapor-phase pathway for the bottom-up synthesis of a class of porphyrin-based COFs is presented. This approach allows integrating electrocatalysts made of metal-ion-containing COFs into the electrodes’ architectures in a single-step synthesis and deposition. By precisely controlling the metal sites at the atomic level, remarkable electrocatalytic performance is achieved, resulting in unprecedentedly high mass activity values. How the choice of metal atoms, i.e., cobalt and copper, can determine the catalytic activities of POR-COFs is demonstrated. The theoretical data proves that the Cu site is highly active for nitrate conversion to ammonia on the synthesized COFs.

25 ENERGY STORAGE↗
DOE OSTI2023

Half‐Integer Topological Charge Polarization of Quasi‐Dirac Bound States in the Continuum

Abstract The non‐trivial polarization topology of bound states in the continuum (BICs) provides new strategies in nanophotonics. The polarization topology depends on the geometric parameters and energy‐momentum dispersion of the system and can be engineered to add specific functionalities for light molding. Herein, such a possibility is investigated by studying the topology of the polarization states associated with the optical field radiated by BICs when Dirac‐cone‐degeneracy is lifted. The opening of a pseudogap in the Dirac cone dispersion of square‐lattice dielectric photonic crystal slabs is achieved by tuning the slab thickness. First, the emergence of half‐integer topological charges without the requirement of BIC annihilation is theoretically shown, which instead occurs when in‐plane inversion symmetry is broken. Then, using spin‐to‐orbital angular momentum conversion, the theory of half‐integer topological charges mediated by BICs is demonstrated and experimentally proved. The same device is able to give rise to vortices with different orbital angular momentum depending on the way it is illuminated, thus improving the potential of optical multiplexing. In addition, the additive character of the topology‐induced phase‐vortex generation is finally demonstrated for both integer and half‐integer charges using also vortex states as input beams, which is of relevance for information delivery.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inert Gas Element as Active Infrared‐Absorption Source and Donor in Silicon for Forbidden‐Wavelength Sensing

Intrinsic silicon (Si) is forbidden for infrared (IR) sensing at the communication wavelength like 1.31 or 1.55 µm due to the well‐known bandgap limitation. In this work, an unexpected physical picture of using argon (Ar) is identified, which is usually inert to the surrounding chemical environment and used as a protective agent in semiconductor processing, to overcome the IR‐sensing‐forbidden problem in Si. Here, in this work, it is shown by an analysis of a dynamic secondary ion mass spectrometer that such a Si, when exposed to laser pulse in Ar gas, can contain a very high dose of Ar up to 10 20 cm −3 even after 1300 days. First‐principles calculations, molecular dynamics, and Hall effect measurements reveal that, due to both steric and dynamic repulsions by Ar orbitals to Si dangling bonds, the Ar‐filled‐vacancy produces a much wider defect band inside the gap, which is not only responsible for strong infrared absorption, but also causes a significant increase in n‐type conductivity, both in line with experiments. The study proves that originally inert elements in fact can act as active impurities in semiconductors for advanced applications, which updates the current knowledge of defect physics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Early Failure of Lithium–Sulfur Batteries at Practical Conditions: Crosstalk between Sulfur Cathode and Lithium Anode

Lithium–sulfur (Li–S) batteries are one of the most promising next-generation energy storage technologies due to their high theoretical energy and low cost. However, Li–S cells with practically high energy still suffer from a very limited cycle life with reasons which remain unclear. Here, through cell study under practical conditions, it is proved that an internal short circuit (ISC) is a root cause of early cell failure and is ascribed to the crosstalk between the S cathode and Li anode. The cathode topography affects S reactions through influencing the local resistance and electrolyte distribution, particularly under lean electrolyte conditions. The inhomogeneous reactions of S cathodes are easily mirrored by the Li anodes, resulting in exaggerated localized Li plating/stripping, Li filament formation, and eventually cell ISC. Manipulating cathode topography is proven effective to extend the cell cycle life under practical conditions. The findings of this work shed new light on the electrode design for extending cycle life of high-energy Li–S cells, which are also applicable for other rechargeable Li or metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Materials Genomics Search for Possible Helium‐Absorbing Nano‐Phases in Fusion Structural Materials

Abstract Civilian fusion demands structural materials that can withstand the harsh environments imposed inside fusion plasma reactors. The structural materials often transmute under 14.1 MeV fast neutrons, producing helium (He), which embrittles the grain boundary (GB) network. Here, it is shown that neutron‐friendly and mechanically strong nano‐phases with atomic‐scale free volume can have low He‐embedding energy and >10 at.% He‐absorbing capacity, and can be especially advantageous for soaking up He on top of resisting radiation damage and creep, provided they have thermodynamic compatibility with the matrix phase, satisfactory equilibrium wetting angle, as well as a high enough melting point. The preliminary experimental demonstration proves that is a good ab initio predictor of He shielding potency in nano‐heterophase materials, and thus, is used as a key feature for computational screening. In this context, a list of viable compounds expected to be good He‐absorbing nano‐phases is presented, taking into account , the neutron absorption and activation cross‐sections, the elastic moduli, melting temperature, the thermodynamic compatibility, and the equilbrium wetting angle of the nano‐phases with the Fe matrix as an example.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stabilizing Reversible Oxygen Redox Chemistry in Layered Oxides for Sodium‐Ion Batteries

Abstract Triggering oxygen‐related activity is demonstrated as a promising strategy to effectively boost energy density of layered cathodes for sodium‐ion batteries. However, irreversible lattice oxygen loss will induce detrimental structure distortion, resulting in voltage decay and cycle degradation. Herein, a layered structure P2‐type Na 0.66 Li 0.22 Ru 0.78 O 2 cathode is designed, delivering reversible oxygen‐related and Ru‐based redox chemistry simultaneously. Benefiting from the combination of strong Ru 4d‐O 2p covalency and stable Li location within the transition metal layer, reversible anionic/cationic redox chemistry is achieved successfully, which is proved by systematic bulk/surface analysis by in/ex situ spectroscopy (operando Raman and hard X‐ray absorption spectroscopy, etc.). Moreover, the robust structure and reversible phase transition evolution revealed by operando X‐ray diffraction further establish a high degree reversible (de)intercalation processes (≈150 mAh g −1 , reversible capacity) and long‐term cycling (average capacity drop of 0.018%, 500 cycles).

Cao, Xin↗
DOE OSTI2020

Mixed Ionic–Electronic Conductor of Perovskite Li x La y MO 3-δ toward Carbon-Free Cathode for Reversible Lithium–Air Batteries

Mixed ionic–electronic conductors (MIECs) can play a pivotal role in achieving high energies and power densities in rechargeable batteries owing to their ability to simultaneously conduct ions and electrons. In our study, a new strategy is proposed wherein late 3d transition metals (TMs) are substituted into a perovskite Li-ion conductor to transform it into a Li-containing MIEC. First-principles calculations show that perovskite Li x La y MO 3 with late 3d TMs have a low oxygen vacancy formation energy, implying high electron carrier concentrations corresponding to high electronic conductivity. The activation barriers for Li diffusion in Li x La y MO 3 (M = Ti, Cr, Mn, Fe, and Co) are below 0.411 eV, resulting in high Li-ion conductivity. The designed perovskites of Li0.34La 0.55 MnO 3-δ experimentally prove to have high electronic (2.04 × 10 -3 S cm -1 ) and Li-ion (8.53 × 10 -5 S cm -1 ) conductivities, and when applied in a carbon-free cathode of a Li–air cell, they deliver superior reversibility at 0.21 mAh cm -2 over 100 charge/discharge cycles while avoiding the degradation associated with carbonaceous materials. Finally, this strategy enables the effective design of Li-conducting MIEC and reversible Li–air batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Porous FeCo Glassy Alloy as Bifunctional Support for High-Performance Zn-Air Battery

Zn-air battery (ZAB) is attracting increasing attention due to its high safety and performance. However, the practical application of ZAB relies heavily on developing durable support materials to replace conventional carbon supports which have unrecoverable corrosion issues, severely jeopardizing ZAB performance. Herein, a novel porous FeCo glassy alloy was developed as bifunctional catalytic support for ZAB. Specifically, the conducting skeleton of the porous glassy alloy was used to stabilize oxygen reduction cocatalysts, and more importantly, the FeCo served as the primary phase for oxygen evolution. To prove the concept of catalytic glassy alloy support, ultra-small Pd nanoparticles were anchored, as oxygen reduction active sites, on the porous FeCo (noted as Pd/FeCo) for ZAB. The Pd/FeCo exhibited a significantly improved electrocatalytic activity for oxygen reduction (a half-wave potential of 0.85 V) and oxygen evolution (a potential of 1.55 V to reach 10 mA cm –2 ) in the alkaline media. When used in the ZAB, the Pd/FeCo delivered an output power density of 117 mW cm –2 and outstanding cycling stability for over 200 h (400 cycles), surpassing the conventional carbon-supported Pt/C+IrO 2 catalysts. Such an integrated design of combining highly active components with porous architecture provides a new strategy to develop novel nanostructured electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

New Cost-Effective Halide Solid Electrolytes for All-Solid-State Batteries: Mechanochemically Prepared Fe 3+ -Substituted Li 2 ZrCl 6

Owing to the combined advantages of sulfide and oxide solid electrolytes (SEs), that is, mechanical sinterability and excellent (electro)chemical stability, recently emerging halide SEs such as Li 3 YCl 6 are considered to be a game changer for the development of all-solid-state batteries. However, the use of expensive central metals hinders their practical applicability. In this study, a new halide superionic conductors are reported that are free of rare-earth metals: hexagonal close-packed (hcp) Li 2 ZrCl 6 and Fe 3+ -substituted Li 2 ZrCl 6 , derived via a mechanochemical method. Conventional heat treatment yields cubic close-packed monoclinic Li 2 ZrCl 6 with a low Li + conductivity of 5.7 × 10 –6 S cm –1 at 30 °C. In contrast, hcp Li 2 ZrCl 6 with a high Li + conductivity of 4.0 × 10 –4 S cm –1 is derived via ball-milling. More importantly, the aliovalent substitution of Li 2 ZrCl 6 with Fe 3+ , which is probed by complementary analyses using X-ray diffraction, pair distribution function, X-ray absorption spectroscopy, and Raman spectroscopy measurements, drastically enhances the Li + conductivity up to ≈1 mS cm –1 for Li 2.25 Zr 0.75 Fe 0.25 Cl 6 . The superior interfacial stability when using Li 2+ x Zr 1– x Fe x Cl 6 , as compared to that when using conventional Li 6 PS 5 Cl, is proved. Furthermore, an excellent electrochemical performance of the all-solid-state batteries is achieved via the combination of Li 2 ZrCl 6 and single-crystalline LiNi 0.88 Co 0.11 Al 0.01 O 2 .

25 ENERGY STORAGE↗