SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NASA's Code QE Test Effectiveness Program is funding a series of applied research activities focused on utilizing the principles of physics and engineering of failure along with those of engineering economics to assess and improve the value added by various validation and verification activities, with the primary emphasis being on testing.
High performance IR cameras are in great demand for a variety of applications, including defense (e.g. night vision, missile detection) and space (e.g. imaging at IR wavelengths). IR focal plane arrays (FPAs) are an essential component of IR cameras. An FPA is a collection of detectors at the focal plane of an imaging device, where each detector can be thought of a pixel in the image it is detecting. The FPA in this study is based on Complimentary Barrier Infrared Detectors (CBIRDs). The CBIRD FPA was tested by imaging flat black body targets at three different temperatures, 20ºC, 25ºC, and 30ºC, with images captured using SEIR software. The important figures of merit for an IR FPA, Noise Equivalent Difference Temperature (NEDT), Noise Equivalent Irradiance (NEI), detectivity (D*), responsivity, and quantum Efficiency (QE), were extracted from the image data for each individual detector using a MATLAB program, as was the array Modulation Transfer Function MTF. The test results show a mean NEDT of 16.98mK and an MTF of about 0.34 at the Nyquist frequency. Overall, the array performs well in the MWIR range and takes quality IR images.
We report on development of ultraviolet photon counting detectors based on the 2D-doped and atomic layer deposition (ALD) custom coated electron multiplying CCD (EMCCDs) and their deployment in a high-altitude balloon experiment Faint Intergalactic-medium Redshifted Emission Balloon (FIREBall)-2 that was launched on September 22, 2018. The detector quantum efficiency (QE) was optimized for the narrow stratospheric window of a balloon at 200 - 225 nm.
The Advanced Telescope for High ENergy Astrophysics (ATHENA) mission requires high quantum efficiency (QE) x-ray absorption, >90.6% at 7 keV and low specific heat capacity, 0.731 pJ/K. The designed ATHENA x-ray absorbers are cantilevered square tiles (pitch of 317 microns) of 1.05 μm thick Au and 5.51 μm thick Bi electroplated films supported by stems that connect the absorber to the detector below. We discuss some of the methods used to produce x-ray absorbers meeting these specifications for ATHENA. To tune the thermal conductance of the device and the effect on the normal-to superconducting transition shape, the stems need to be small diameter and can have a weak bottle-neck connection to the substrate. A funnel shape of the stem using a proximity exposed photoresist mold has been developed to improve the strength of the connections. Further requirements on the absorbers include low levels of fine particulate remaining on the substrate after production and zero shorts between absorbers due to incomplete ion milling or trapped fine particular between absorbers. To optimize for post patterning substrate cleanliness and absorber yield, we have examined several methods of absorber fabrication. Three such methods are 1) an ion mill/wet etch combination, 2) a photoresist mold for electroplating followed by wet or dry etch to remove the seed layer, and 3) an electroplating process with leveling to smooth the surface followed by ion mill to separate the absorbers. The different combinations of wet and dry etches lead to different yields and surface appearance of the absorber sidewalls. We present results on the achieved pixel yields and the energy resolution of pixels made with the various fabrication methods. We discuss the impact of absorber patterning method on performance, uniformity, and yield.
The Multi-angle Imaging SpectroRadiometer (MISR) was launched as part of NASA’s Terra satellite suite of instruments. Still operational, it makes use of observations from multiple view angles to retrieve aerosol abundance and particle properties. The Multi-Angle Imager for Aerosols (MAIA) instrument improves on this heritage by incorporating polarimetry and an expanded spectral range. Combining these data with surface measurements, the relationship between pollution and human health will be explored. MAIA has just completed camera testing, building on the experience from MISR. Spectral calibration now makes use of a double subtractive monochromator, built with the intent to allow the exit slit output to be uniform in spectral content. For radiometric testing, hardware upgrades have included adding UV lamps to the 1.65 cm (65") integrating sphere, use of a NIST-traceable sphere to establish absolute radiances, and the addition of a UV transfer spectrometer to support characterization of the sphere output from 300 to 2500 nm. During camera build, Newton’s rings were observed in the detector Quantum Efficiency (QE) measurements. This is due to etaloning within the detector itself. Etaloning was also evident in the spectral and radiometric characterizations performed on the completed camera. Spectral metrics, including center wavelength and width, are presented here using a moment’s analysis. This better represents the band properties, particularly in bands where fringing is observed, as compared to a full-width at half-maximum determination. It is believed that the MAIA camera has been carefully characterized, and meet its spectral and radiometric requirements.
The study of neutrino oscillations and the extraction of high-accuracy neutrino mixing angles, CP phases, and mass differences, are at the forefront of the worldwide current experimental physics research. Neutrino experiments aim towards a high-precision extraction of these parameters, which requires a good knowledge of the interaction with the detector and target materials. In the energy range most relevant for oscillation studies ($E_\nu \sim$ 0.3 to 3 GeV), the dominant neutrino nucleus interaction is quasi-elastic (QE) scattering. Charged-current quasielastic (CCQE) scattering is the process by which the neutrino produces a charged lepton and removes a single intact nucleon from the nucleus, without producing any additional particles. It is one of the simplest lepton--nucleus interactions in the energy regime relevant for neutrino oscillation experiments. This thesis describes the identification and analysis of CCQE events in a data sample collected in the MicroBooNE detector at Fermilab during 2016; It discusses the isolation of the signal and the background rejection, as well as the extraction of the exclusive flux--integrated cross--sections for neutrino CCQE scattering off argon, $\nu_{\mu} + ^{40}$Ar$\to \mu^{-} + p$, as a function of the kinematics of the outgoing particles emerging from the interaction. We extracted $ \frac{d\sigma}{dp_{\mu}}, \frac{d\sigma}{d\cos\theta_{\mu}}, \frac{d\sigma}{d\phi_{\mu}}$, and $ \frac{d\sigma}{dp_{p}}, \frac{d\sigma}{d\cos\theta_{p}}, \frac{d\sigma}{d\phi_{p}}$. Here $p_p$,$\theta_{p}$,$\phi_p$ ($p_\mu$,$\theta_{\mu}$,$\phi_\mu$) are the momentum and scattering angles of the outgoing proton (muon). The data are in good agreement with predictions of GENIE, the standard event generator used for neutrino oscillation studies. The data confirms and constrains calcu lations essential for the extraction of oscillation parameters.
As we prepare for lower neutrino energy beams where physics is highly energy-dependent, it is important to isolate factors that can contribute largely to these low energy neutrino experiments. The world of neutrino oscillation experiments uses a wide range of energies: from 0.7 GeV beam of T2K and MicroBooNE, 2 GeV beam of NOvA, to the 0.6 to 6.0 GeV beam produced by DUNE in the future. MINERvA’s data are currently the best place to test the upper end of the range for DUNE and can be extrapolated into both DUNE’s and NOvA’s oscillation maximum. The goal of the research is to constrain energy dependence in the neutrino scattering experiment using data from MINERvA and then determine what factors contribute to the observed energy dependence. The research is divided into two parts. First, I will analyze different theoretical models in different channels of interaction, such as the quasi-elastic and delta resonance channels, in terms of neutrino energy dependence. The goal is to study the models at the level of the structure functions, which emphasizes the W2 structure function (the C function for QE) dominates the MINERvA data, but the W3 is increasingly important for NOvA and DUNE. The second half of the research is data-driven and focuses on the different detectors and systematic effects. An experimental effect, the angle acceptance, is larger than the structure function effects. However, it is a detector geometry effect and is well measured and well modeled. Other effects such as the muon energy scale are small and localized. Additionally, the research will determine if the MINERvA GENIE model correctly predicts all of the energy dependence seen in the data, and identify the remaining unmodeled energy dependence between the MINERvA data and its best simulation.
The description of final-state interactions (FSI) in the large phase space probed in neutrino experiments poses a great challenge. In neutrino experiments, which operate under semi-inclusive conditions, cascade models are commonly used for this task, while under exclusive conditions FSI can be treated with relativistic optical potentials (ROP). We formulate conditions under which the ROP approach and cascade model can be directly compared. We feed the NEUT cascade with events from a relativistic distorted-wave impulse approximation calculation that uses the real part of an optical potential. Cuts on the missing energy of the resulting events are applied to define a set of events that can be directly compared to RDWIA calculations with the full optical potential. The NEUT cascade and ROP agree for proton kinetic energies $T_p > 150$ MeV for carbon, oxygen and calcium nuclei when a realistic nuclear density is used to introduce events in the cascade. For $T_p < 100$ MeV the ROP and NEUT cross sections differ in shape and differences in magnitude are larger than 50 %. Single transverse variables allow to distinguish different approaches to FSI, but due to a large non-QE contribution the comparison to T2K data does not give an unambiguous view of FSI. We discuss electron scattering and argue that with a cut in missing energy FSI can be studied with minimal confounding factors in e.g. $e4\nu$. The agreement of the ROP and NEUT for T2K conditions lends confidence to these models as a tool in oscillation analyses for sufficiently large nucleon kinetic energies. These results urge for caution when a cascade model is applied for small nucleon energies. The assessment of model assumptions relevant to this region are strongly encouraged. This paper provides novel constraints on cascade models from proton-nucleus scattering that can be easily applied to other neutrino event generators.
The magnetic form factor characterizes the magnetic distribution inside the neutron and knowledge of it is essential for the understanding of the neutron structure. The E12-11-112 experiment aimed to measure the neutron magnetic form factor (GnM) from the 3H/3He cross sections ratio, in the Q2 range of 0.5 - 3 GeV2. Quasi-elastic (QE) electron scattering was used to probe nucleons on the nucleus of the mirror 3H and 3He nuclei, in Hall A at the Thomas Jefferson National Accelerator Facility (JLab). The use of the mirror nuclei ratio is a novel extraction that cancels several systematic uncertainties from the cross section effects in the ratio. The motivation of this measurement is the disagreement between the precision measurements among the Q2 range of 0.5 - 1 GeV2 in the worldwide data. A total of five Q2 points were taken between this region and four more were taken with a Q2>1 GeV2 in order to estimate the accuracy of the method. Ideally, the 3H/3He ratio should be enough to calculate the magnetic form factor, but due to nuclear effects, there will be a correction of up to 8 % depending on the Q2 value that has to be evaluated before the form factor extraction. The cross sections were measured with a point-to-point uncertainty of 3 - 4.5 %, and the ratios were also evaluated with an uncertainty of 1.5 - 3 %. Therefore, the preliminary studies of the Gn M are summarized, and from the present analysis, it can be concluded that the precision of the measurement in the region of interest will be of the order of 1.5%.
The neutrino oscillation experiments are being performed using detectors having moderate to heavy nuclear targets like $^{12}{C}$, $^{16}{O}$, $^{40}{Ar}$, $^{56}{Fe}$, $^{208}{Pb}$, etc. to get a reasonably good number of events. Many present-day neutrino experiments are taking data in the few GeV (1 $\leq$ E$_{\nu}$ $\leq$ 10 GeV) energy region of neutrinos and antineutrinos to which some of the neutrino oscillation parameters are sensitive and required to understand CP violation in the lepton sector. This is the energy region which is most intriguing as it receives the contribution from the Quasielastic Scattering~(QE), Inelastic Scattering(IE), Shallow Inelastic Scattering (SIS) and the Deep Inelastic Scattering~(DIS) processes. This thesis details three different studies: \begin{itemize} \item First, a DIS study was performed with the MINERvA experiment at the Fermilab. MINERvA is a dedicated neutrino and antineutrino cross-section measurement experiment and uses (anti)neutrino beams in the two energy runs {\it viz.} the low energy run~(the peak of which lies $\sim$ 3 GeV) and the medium energy run(the peak lies at $\sim$ 6 GeV). The MINERvA experiment is using several nuclear targets like $^{4}$He, $^{12}$C, $^{16}$O, $^{56}$Fe and $^{208}$Pb and the aim is to perform EMC~(European Muon Collaboration experiment using charged lepton beam on several nuclear targets) kind of measurements to understand the nuclear medium effects in both the neutrino and antineutrino modes in the wide region of Bjorken scaling variable $x$, and the four-momentum transfer squared $Q^2$, covering the quasielastic, inelastic, and the deep inelastic scattering regions. In the medium energy region, it is expected that more than 30\% of the events would arise due to DIS processes. \item Second part of the thesis includes the analysis of the proposed India-based Neutrino Observatory(INO) atmospheric neutrino experiment. This work is dedicated to studying atmospheric neutrino and ant ineutrino oscillation parameters in the INO experiment. We present the ICAL sensitivity to confirm a non-zero value of the difference in atmospheric mass squared of neutrinos and anti-neutrinos i.e. ($|\Delta m^{2}_{32}|$-$|\Delta\overline{m^{2}}_{32}|$). \item Third, the theoretical work that was performed at the Aligarh Muslim University. This work has been performed keeping in mind the theoretical development of a model that will describe the associated particle production induced by photons, electrons, neutrinos, and antineutrinos. We have studied the associated particle production induced by photons which receive the contributions from the non-resonant terms and from the nucleon, hyperon, and kaon resonances. \end{itemize}
In a comprehensive study conducted at NREL's 75 kW bifacial single-axis-tracked field, accelerated degradation was observed in four out of five bifacial silicon photovoltaic (PV) module technologies when compared to their monofacial counterparts. Root cause analysis of accelerated bifacial degradation involved various analytical tools and techniques. This included employing RdTools to identify rates of power loss, conducting measurements on fielded and control modules using infrared imaging, electroluminescence (EL) and photoluminescence (PL), quantum efficiency (QE) analysis, IV-curves assessment, as well as utilizing handheld Raman and reflectance measurement targeted at anti-reflective coating. Most cases pointed to carrier lifetime degradation causing Voc loss and simultaneous Isc loss. In some cases, Isc further decreases likely due to optical effects from encapsulant degradation. The outcomes and methodologies employed in this investigation are documented in this publication. This study's significance is further emphasized by placing the findings within the broader context of the performance and degradation of various bifacial systems, as identified in the PV Fleets data.
The responses of plant photosynthesis to rapid fluctuations in environmental conditions are critical for efficient conversion of light energy. These responses are not well-seen laboratory conditions and are difficult to probe in field environments. We demonstrate an open science approach to this problem that combines multifaceted measurements of photosynthesis and environmental conditions, and an unsupervised statistical clustering approach. In a selected set of data on mint (Mentha sp.), we show that ‘light potentials’ for linear electron flow and non-photochemical quenching (NPQ) upon rapid light increases are strongly suppressed in leaves previously exposed to low ambient photosynthetically active radiation (PAR) or low leaf temperatures, factors that can act both independently and cooperatively. Further analyses allowed us to test specific mechanisms. With decreasing leaf temperature or PAR, limitations to photosynthesis during high light fluctuations shifted from rapidly induced NPQ to photosynthetic control of electron flow at the cytochrome b 6 f complex. At low temperatures, high light induced lumen acidification, but did not induce NPQ, leading to accumulation of reduced electron transfer intermediates, probably inducing photodamage, revealing a potential target for improving the efficiency and robustness of photosynthesis. We discuss the implications of the approach for open science efforts to understand and improve crop productivity.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Over the past few years considerable advancements have been made in the design and manufacture of Millimeter-Wave/Microwave Monolithic Integrated Circuits (MMIC).
Explore the source record for details and available documents.